Huber Holzbearbeitungsmaschinen GmbH & Co. KG

Condition: excellent (used), Year of construction: 2020, Altendorf - Hebrock K36 edge bander with Airtronic, jointing, corner rounding, and two scrapers. Top-of-the-line features with multi-radius, nesting, and spraying devices, virtually fully equipped. Touchscreen interface with PLC control for easy machine operation. The machine can be quickly switched between the glue pot and Airtronic. The machine has the Airtronic option, but can also be operated with the standard glue pot without restrictions. Edge thickness roller approx. 0.5 - 3 mm Workpiece height approx. 8 - 60 mm Feed rate approx. 7 - 10 m/min (automatic reduction with corner rounding machine and Airtronik) Noise protection hood Extendable workpiece support Extraction connection 80 + 140 mm Units: Release agent spray device, top and bottom Quick-change tank with glue outlet Airtronik air heater unit up to 40 mm Top pressure, electric motor adjustment Infeed guide, manual adjustment with SIKO counter Edge thickness, manual adjustment with SIKO counter Jointing with Leitz Whispercut diaphragm cutters Gluing unit with automatic edge feed for roll material up to 3 mm Pressure zone with 4 rollers Ccjsirbdqg Antistatic coolant spray device, top and bottom Crosscut saw, integrated collection container for Edge trimming units Protective spraying device for sensitive edges Multi-radius milling unit with multi-tool diaphragm cutter, with pneumatic 3-point adjustment between R1, R2, and bevel Corner rounding unit R2, pneumatically adjustable between thin and thick edges The profile rounding unit can also be used with the shelf program, so only the straight edge is rounded and not the corners Multi-radius scraper R1 / R2, pneumatically switchable and retractable Cleaning agent spraying device, top and bottom Glue joint scraper, pneumatically retractable Buffing tool, cleaning station Cover locking device CE mark Operating manual A video of the machine in operation can be sent upon request. All indexable inserts of the milling units and scrapers have been replaced or turned, the saws and diaphragm cutters (Whispercut) have been sharpened, and the buffing wheels have been replaced. The machine is therefore ready for immediate use. Only the diaphragm cutters of the radius cutter and the corner rounding cutter have not been replaced, but they are still sharp. Original paint, only minor paint damage has been repaired. The machine has approximately 5,400 operating hours (glue pot switched on), but the frequency converters for the milling units and cross-cut saw have only been switched on for approximately 3,800 operating hours. Machine dimensions approx. 5,550 x 1,200 x 1,450 mm (LxWxH), including edge plate. Weight approx. 1,700 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are in our warehouse ready for demonstration; see "Other offers from this supplier."

Condition: ready for operation (used), Year of construction: 2005, This SCM SI 400E edgebander was manufactured in 2005. It is a robust and reliable machine, ideal for efficient edge banding operations. If you are looking to get high quality edge banding capabilities consider the SCM SI 400E machine we have for sale. Contact us for more information. Cb9Uv8C2Vu Application Types Edge Banding

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, Edgebander installed in 2018. in Croatia – as good as new ! Ready for transport ! K 560R OLIMPIC K 560 - MACHINE COMPOSITION: European safety regulations (CE norms) 1 olimpic k 560 composition T-ER2 (40) 1 Volt 400 EU 1 Frequency 50 Hz 1 "StarTouch" electronic control instead of "Touch 7" 1 Cbzjvbcyrq "Telesolve" 1 "AAR" anti-adhesive unit 1 Spray-mist device for edge finishing 1 "RC-V" glue scraping unit 1 "SP-V" brushing unit 1 Electronic positioning of top presser 1 "EASY SIZE" device 1 Infrared ceramic lamp 1 Gluing unit with pre-melting device 1 "SGP" glue pot with automatic dosing by NC in substitution of the standard one 1 machine transport dimensions: 505x100x195 cm total weight: 1.800 kg

Condition: used, Year of construction: 2014, Edgeband thickness max: 8 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece length min: 140 mm Workpiece width min: 60 mm Feed min: 10 m/min Drhayj Continuously variable feed: Yes Electromotoric height adjustment: Yes Top pressure by belt: Yes Glue system cartridge: Yes Glue system granulate: Yes Magazine for single strips: Yes Andruckzone NC-gesteuert: Yes Trimming saw: 2 motors HOLZ-HER Trimming saw KA 701: Yes Flush/radius/chamfer milling units: 1 HOLZ-HER Flush milling unit 1962: Yes Aggregates actuated by control: pneumatic Free spaces for aggregates: 4 Type: left-side machine Machine length: 6.760 mm Control: HOLZ-HER EDGECONTROL PPC 231 Conformity marking: CE mark

Condition: good (used), Year of construction: 2010, operating hours: 250 h, Functionality: fully functional, machine/vehicle number: 200, total length: 2,500 mm, total width: 1,300 mm, edge thickness (max.): 2 mm, total height: 1,400 mm, overall weight: 400 kg, type of input current: three-phase, compressed air connection: 6.5 bar, height adjustment type: mechanical, input voltage: 400 V, extraction nozzle diameter: 100 mm, working height: 900 mm, power: 4.4 kW (5.98 HP), frequency: 50 Hz, Good & compact edge banding machine Low operating time ABS & solid wood edges Small footprint Cbhihtaepy Easy to operate Adjustable bevel & round edge VAT deductible

Condition: new, Minimax ME 35 TR S Holzkraft Edge Banding Machine Cbgmjqyzgm -Exhibition Machine- This offer is an equipment package. The following items and options are already included in the price: - New exhibition machine -

Condition: ready for operation (used), Year of construction: 2003, This HOMAG WEEKE PROFI KFL20/29/QA/25 edgebander was manufactured in 2003. Consider the opportunity to buy this HOMAG WEEKE PROFI KFL20/29/QA/25 edgebander. Contact us for further details. Application Types Caza0Iijg8 Edge Banding

Condition: used, Year of construction: 2001, No. 3210 Edge banding machine Ott Pacific V 6 - F Used, year of construction 2001 Hot-melt adhesive hot-cold process Application roller with synchronized and counter-rotation Adjustable infeed ruler 0 - 12 mm Milling 0.2 - 6 mm Workpiece thickness 8 - 42 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Compressed air required 6 bar Feed speed 12 m/min Aggregates: Joining (pre-milling) 2 x 1.5 kW Fine milling machine, flush chamfer 0° / 15° / 30° / 45° (2 carbide insert cutterheads) Fine router, radius R2 - R5 (2 carbide insert cutterheads) Scraper, automatic feed (2 carbide blades) Corner rounding AR-2 (2 carbide insert cutterheads) Edge cleaning (2 oscillating brushes) Transport dimensions approx. 5300 x 1300 x 1250 mm LWH Weight approx. 2200 kg Sale on behalf of customer, ex location near 69124 Heidelberg, without disassembly, without transport and assembly Dismantling, loading and transportation by us optionally possible Drgy2P Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 2015, Edgeband thickness max: 8 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece width min: 70 mm Feed min: 8 m/min Feedrate max: 14 m/min Continuously variable feed: Yes Electromotoric height adjustment: Yes Glue system granulate: glue pot below feeding chain, Premelting unit BRANDT Glue system QUICKMELT: Yes BRANDT Glue system A 8 Gluing unit: Yes Quick-change glue pot: Yes Caseddogm3 Suitable for PUR glue: Yes Chem-Coat: Yes Magazine for single strips: Yes Spraying device: Yes Release agent: Yes Cleaning agent: Yes Premilling unit: Yes Preheating zone: Yes Andruckzone NC-gesteuert: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 BRANDT | HOMAG MS 40 Multifunctional trimming unit: Yes Corner rounding unit: 1 motor BRANDT Corner rounding unit WD 60: Yes Scraper unit: Profile scraper, Flat scraper BRANDT | HOMAG MZ 40 Multistage profile scraping unit: Yes Buffing unit: Yes Aggregates actuated by control: NC-axes, pneumatic Quick-change aggregate(s): Yes Type: right-side machine Machine length: 5.573 mm BRANDT PU top pressure rollers: Yes Control: Homag powerTouch Conformity marking: CE mark Total connection: 13 kW Weight: 1.850 kg Space requirement Length: 5,6 m Space requirement Width: 1,6 m Space requirement Height: 2,2 m

Condition: used, Year of construction: 2017, Functionality: fully functional, The high-performance Biesse STREAM A 5.0 edge bander is designed for precise and efficient edge banding in industrial furniture production. This model provides reliability, speed and high processing quality, thus meeting the requirements of even the most demanding customers. Technical specifications Thickness of edging material (in rolls): 0.3–3 mm Maximum thickness of edging material (in strips): 20 mm Minimum panel thickness: 10 mm Maximum panel thickness: 60 mm Minimum panel length: 140 mm Minimum panel width: 85 mm (with a panel length of 140 mm) Feed speed: up to 25 m/min Glue system: granules, glue container under the feed belt Weight: 3200 kg Key features Robust design - ensures stable operation even under high loads. Precise edge banding – suitable for various types of edges (ABS, PVC, veneer). High speed and efficiency – ideal for industrial processing. Advanced extraction – minimizes waste and ensures a clean workspace. Easy integration into a production line – compatible with modern automation systems. Machine composition Pre-milling unit: 2 motors with NC axis for automatic adjustment Gluing unit: system with pre-melting unit for granules Trimming unit: front and rear trimming units with tilting option Upper and lower milling unit: rough and fine milling with NC axes for precise adjustment Rounding unit: 2 motors with NC control for edge rounding Scraping unit: upper and lower profile scrapers with pneumatic exclusion Polishing unit: upper and lower polishing wheels for final finishing Interested in this machine? Contact us and we will be happy to provide you with more information! Drgv9J

Condition: like new (used), Year of construction: 2018, We offer a professional edge banding machine HOMAG KDF 440 edition in perfect condition. The machine is fully controlled by servo motors for maximum accuracy and efficiency. The selling price of a new machine in this configuration is currently 1.9 million CZK excluding VAT, now you have the opportunity to get this premium machine with a saving of more than 500,000 CZK! Year of manufacture and commissioning: 2018 Condition: Only 195 km of edge glued - new machine Service: Regular warranty service from an authorized dealer Epimex s.r.o. Key advantages: - Easy to operate - you select a preset program, the machine automatically adjusts - Possibility to save your own programs according to the needs of your production - Minimal operator requirements - thanks to automation, the machine can be operated even by less qualified personnel - Premium equipment included in the price - a second application unit for the usual 110,000 CZK is included in the offer! Technical specifications: - Fully servo-controlled including part height and pre-milling unit - Max. length 5573mm, width 1300mm, height 2180mm - Feed speed: 8-14 m/min (with cornering unit 11 m/min) - Part thickness: 8-60 mm - Edge thickness: 0.3-8 mm - Extended guide table for better handling - Adjustable support guide according to the width of the parts - Meter and edge time counter + order sheets Machine equipment: - 2× pre-milling unit - Heating unit for preheating parts - 2× application unit for EVA and PUR glue (the second was for an additional charge of 110,000 CZK) - 2× trimming saws - Milling unit Canaf3Ymv3 - Single-motor cornering unit (two positions for different edge thicknesses) - Radius edge guards (two positions for different edge thicknesses) + blowers - Surface cleaners + blowers - Brush unit for perfect cleaning Practical advantages: - Instant change between transparent and white glue thanks to two application trays - No draining of trays and loss of glue - 100% condition of the entire machine - The machine holds the settings perfectly - minimal maintenance - Easy to operate - Reliability

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, JOINING UNIT GLUE UNIT COMBI-FLUSHABLE FOR PUR ADHESIVE LINEAR CUTTER FINE MILLING UNIT RADIUS SCRAPER FLUSH MILLING UNIT COPY MILLING UNIT " MOTORS SURFACE SCRAPER Cala2K7Cau FREE SPACE

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, Biesse Stream A 6.0 Edgebander Year of production: 2018 Condition: Excellent Technical Specifications: Edge thickness (rolls): 0.4–3 mm Edge thickness (strips): up to 22 mm Panel thickness: 10–60 mm Minimum panel length: 140 mm Minimum panel width: 85 mm (for a panel length of 140 mm) or 50 mm (for a panel length of 250 mm) Feed speed: 10–25 m/min Machine length: 7450 mm Control system: Biesse Smart Touch 21.5'' Software: CNI Sintra HD Total power requirement: 27 kW Drgrlf Weight: approximately 3800 kg The machine is equipped with an invisible joint gluing system (AirForce), ensuring an aesthetically perfect finish without visible glue lines. The Stream A 6.0 features an innovative yet user-friendly design, a hallmark of Biesse. Its transparent, reinforced polycarbonate cover guarantees work safety while maintaining full visibility of the process. With its advanced functions and robust construction, the Biesse Stream A 6.0 is an excellent solution for companies seeking a reliable and high-performance edgebander.

Condition: used, Functionality: unexamined, Ferwood Code: RU0010027 - Manufacturer Code: H0101D01000A1 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. B9Uvtfa0Qu

Condition: used, Year of construction: 2022, . Sonderpreis Ausstellungsmaschine Garbsen Kantenanleimmaschine K36 Stk LEISTUNGSSTARK UND ROBUSTDieser Hebrock-Dauerrenner bietet ungeahnte Möglichkeiten. Für höchste Ansprücheentwickelt, steht die K 36 für absolute Zuverlässigkeit und Produktivität im täglichen ch die Möglichkeit, die Maschine mit einem Stufenfräser und einer Multi-Radiusziehklingezu bestücken, setzt Hebrock auf neue Maßstäbe im Bereich perfekte Kantenbearbeitungverschiedenster Kantenstä TECHNISCHE PROFIL- Max. Kantenstärke bis 3 mm (optional 8 mm)- Min. / Max. Werkstückdicke 8-60 mm*- Min. Werkstücklänge ca. 200 mm* - Min. Werkstückbreite ca. 80 mm* - Vorschubgeschwindigkeit ca. 7/10 m/min- Betriebsbereit in 6 min- Optionale Multiwerkzeuge- Gewicht 1700 kg- Absaugstutzen Fügefräse 80 mm- Absaugstutzen Hauptabsaugung (Maschinenrückseite) 140 mm- Luftbedarf Standard Maschine ca. 300-400 l/min- Luftbedarf airtronic Maschine ca. 600-800 l/minDIE GRUNDAUSSTATTUNG - SPS-Steuerung mit Touchscreen 10- Optische Anzeige für Werkstückfolge- Vorfräsen- Obenliegender Schmelzkleberbehälter (Wechselbeckenausführung / Wartungsfrei) mitKleberauslaufvorrichtung- Kappsäge- Fräsaggregat- Eckenfräse- Radiusziehklinge- Flächenziehklinge- Putzstation- Werkzeuge- Späneauffangkasten (Kappsäge)- Transportkette mit festverschraubten Spezialketten- Kugelgelagerter Doppelrollenoberdruck- Ausleger (ausziehbar zur Vorderseite)- Aggregatsichtfenster von Maschinenrück- und BedienerseiteFügestationWhispercut Fügesystem mit austauschbaren aße: ø 100 x 43 mm Optional: ø 100 x 63 mmMotorleistung: 2 x 2,2KwDrehzahl 12.000 U/minMax. Fügetiefe 3 mm - bis Werkstückhöhe 40 mmMax. Fügetiefe 2 mm - bei Werkstücken über 40 mm Optimale Schneidenausnutzung durch separate manuelle Höheneinstellung der Fügekö VORTEIL- Kein Nachschärfen der Köpfe mehr, nur noch Diamantschneiden austauschen- Kein Nachstellen in der Maschine mehr notwendig- Nur noch ein Satz Fügeköpfe erforderlich- Durch Aluminiumleichtbauweise schonender für Motore- In der Höhe einstellbar für optimale SchneidenausnutzungLeimbecken WechselausführungDie bewährte Hebrock Leimbeckentechnologie umfasst:- Spitzenzeiten im Aufheizen des Leimbeckens, innerhalb von 6 min ist Ihre MaschineBetriebsbereit!- Eine spezielle Teflon Beschichtung, sodass die Reinigung Ihres Leimbeckens zum Kinderspielwird.- Einen bequemen und einfachen Wechsel Ihres Leimbeckens, durch Schnellverschlüsse derElektrik und Pneumatik, so gelingt ein Wechsel in unter einer Minute.- Füllmenge 1KGKleberwechselvorrichtungDurch die in der Maschine integrierte Kleberwechselvorrichtung ist das Austauschen vonKlebersorten bzw. Farben ein fach den im Programm hinterlegten Button zum Hochheizen für das Erreichen derAuslauftemperatur drücken, den Auslauf durch einen Schieber manuell öffnen und dasLeimbecken leerlaufen lassen. Anschließend neues Granulat im Leimbecken nachfüllen undperfekte Ergebnisse erzielen. AndruckzoneDiese 4 Andruckrollen üben durch Ihre federnde Lagerung einen optimalen Andruck auf dieangeleimte Kante aus. Dank ihrer Beschichtung sind sie außerdem leicht von Kleberrestenoder Schmutz zu psägeDie stabile Bauweise der Kappsäge mit Linearführungen ermöglicht daspräzise Sägen der Werkstück Vorder- und orleistung:Ausführung: 1x 0,37 KWDrehzahl 12.000 U/min FrässtationDieser Alleskönner im Bereich Kantenbearbeitung bietet die Möglichkeit zwischen denBearbeitungsverfahren: Radius- / Fase- un B9Sm8Snwyi

Condition: used, Year of construction: 2013, Functionality: fully functional, I will sell a very good, little used, because it only worked as a second, spare machine, the Format 4 Perfect 710 E-Motion edge bander in full equipment. This is a well-reputed edge bander, strong, heavy construction. I have had the machine since 2013. Bought new. It worked without failure on 1 shift. It was regularly serviced by Felder - it is well-maintained. I believe it is in very good condition and will serve the new buyer for a long time. Feed speed 12m/min. Drgjp7 Minimum element length 140mm. Minimum element width 60mm. Feeding of edges from a roll and wooden edgings with a width of 12 to 64 mm. Guillotine shears for edges from a roll with a thickness of 0.4 to 3 mm. Feed ruler 700mm long. Pre-milling. Touch screen. Glue container. Selling due to replacement with a new machine. Net price

Condition: used, machine/vehicle number: 007721, Type of edging: Thin edge, Thick edge Gluing System: PUR Drghe7 Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 30 m/min Operating Units: 8 nr

Condition: used, Year of construction: 2014, Edgeband thickness max: 12 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece length min: 140 mm Workpiece width min: 70 mm Electromotoric height adjustment: Yes Glue system granulate: Premelting unit Quick-change glue pot: Yes Suitable for PUR glue: Yes Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes Preheating zone: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 2 motors Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Aggregates actuated by control: NC-axes Type: right-side machine Drgfbx Machine length: 5.320 mm Suitable for nesting: Bündig/Radius/Fasestationen, Flat scraper Control: Touchscreen, FORMAT 4 X-MOTION Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 11 kW Weight: 2.300 kg Space requirement Length: 5,4 m Space requirement Width: 1,8 m Space requirement Height: 2,1 m

Condition: used, Functionality: unexamined, Ferwood Code: RU0009717 - Manufacturer Code: 2-055-06-3361 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. B8Xwabmwzm

Condition: like new (used), Year of construction: 1999, operating hours: 105 h, beautiful edge banding machine with only 105 operating hours with jointing total length 4.5 m Drgajh more pictures and data on request

Condition: used, Year of manufacture: 2018, Cross-cut saw unit: Yes, Radius scraper unit: Yes, Surface scraper: Yes, Flush and radius trimming unit: Yes, Joint trimming unit: Yes, Polishing unit: Yes, Corner rounding unit: Yes, 202.05.022.18, Pneumatic mechanical insertion lock, Spraying of release agent, Upper pressure beam, Jointing cutter D=80mm H=64mm, Reversing function for glue application roller, Chain feed, Infrared heating lamp Drf0Rf

Condition: excellent (used), Year of construction: 2008, G 560 with joints B7Sunv9L2S

Condition: used, Year of construction: 1995, operating hours: 5,000 h, Functionality: fully functional, Well-maintained HOMAG edge banding machine with return due to moving for sale at a reasonable price. Drfuzx

Condition: like new (used), Year of construction: 2015, operating hours: 3,000 h, Functionality: fully functional, machine/vehicle number: 280/1-501, Selling cheaply due to moving. Drfuzd

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 600 KG Additional Equipment Glue Pot Capacity: Max glue pot capacity 1 Kg (with optional 2 Kg glue pot) Gluing Unit:Edge gluing on open and closed curved panels of small and large dimensions/1 gluing roller/2 rollers to copy the shape of the panel/2 800 W resistors with electronic temperature control/Manual adjustment of the glue quantity/Glue temperature adjustment/Automatic edge cutting system PLC System: For setting the measurement and cutting of the edge with encoder reading Laser: Facilitates cutting programming for closed pieces without the need to measure the piece Piece Feeder: On/Off automatic piece feeder Work Surface: For edging and trimming small pieces Edge Magazine: Rolled edge magazine with idle roller system B39Ptyiyn8 Trimming Group: 2 high frequency 0.5 kW motors with rotation speed of 15000 rpm /On/Off trimming unit/Pneumatic lifting of the two motors/2 brazed cutters R=3 Z=6/ Articulated Arm: Complete with workpiece depression table for edging and trimming large pieces This VITAP Eclipse edgebander was manufactured in 2018. Ideal for precise edge finishing, it ensures consistent performance for woodworking projects. Consider the opportunity to buy this VITAP Eclipse edgebander. Contact us for more information. Application Types Edge Banding