Multiback Bäckereitechnik

Condition: used, For sale are 4 units of high-quality and robust pneumatic helical agitators from the premium manufacturer Graco, mounted on adjustable aluminum profile rails. These units are ideal for efficiently homogenizing highly viscous materials in 200-liter drums (55 gallons) as well as open containers. Technical specifications: • Manufacturer: Graco Inc. Chjdpfxoz Inhme Af Aoc • Model / Type: Twistork Helix Agitator (Part numbers: 224854) • Drive: Pneumatic rotary vane motor • Power: 1.5 HP (approx. 1.1 kW) • Max. operating pressure: 7 bar / 100 PSI • Max. speed: 800 rpm • Max. viscosity: up to 10,000 cP • Length of the agitator shaft: approx. 95 cm (37.25 in) • Explosion protection: ATEX certified (Ex II 1/2 G c T3 / ITS03ATEX11225) – absolutely safe for solvent-containing media and potentially explosive areas. • Special feature: Reversible (direction of rotation can be reversed), hermetically sealed drive prevents contamination and evaporation of the medium.

Condition: used, For sale is a complete industrial painting station, equipped with two highly efficient pneumatic double diaphragm pumps of the GRACO Triton® 3:1 350 type. The pumps in the Triton series were specifically developed for demanding finishing applications in the metal and wood industries. Thanks to the 3:1 ratio, they generate a high material output pressure and deliver an extremely even, pulsation-free spray pattern. The stainless steel construction allows for trouble-free use with highly viscous, abrasive media, as well as water- and solvent-based paints. Technical specifications: Chsdpfx Afez Im I Sj Aec • Manufacturer: GRACO (USA) • Pump model: Triton 3:1 350 • Number of pumps in the set: 2 • Pressure ratio: 3:1 • Max. air inlet pressure: 0.6 MPa / 6 bar (88 psi) • Max. material working pressure: 1.8 MPa / 18 bar (260 psi) • Material: Stainless steel (SST) for maximum chemical resistance • Overall dimensions of the station: 152 x 252 x H=132 cm

Condition: new, Year of construction: 2021, Industrial Fabric Storage Hall for Sale – Approx. 500 m² For sale: a well-maintained industrial fabric hall with an area of approximately 500 m². The hall is suitable for use as a warehouse, production facility, or for storing timber, machinery, and equipment. - Approximate floor area: 500 m² - Robust steel frame construction Cjdpfx Afoz Im Edo Ashc - Durable PVC/fabric cladding - Large sliding doors - Separate personnel access door - Good internal headroom - Easy access for forklifts and other machinery - The hall can be dismantled and reassembled at another location - Currently erected and available for inspection Price: Upon request / negotiable. Dismantling and loading for transportation can also be arranged separately.

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Cardboard waste compactor press. Chodpfx Asz Ibwnef Ajc

Condition: excellent (used), Year of construction: 2022, 2022 Versafire EP 135 High End Professional Print Production Line Including: Versafire EP 135 A4/min Or 4,500 A3 Sheets/Hour (Simplex) Engine Unit, Media Identification Unit, Fuser Unit, Automatic Colour Diagnosis & Image Quality Monitor Unit, EFI Fiery Colour Controller E-86, EFI Impose (Streamlines & Automates The Imposition Process) & Fiery ES-3000 Spectrophotometer. Versafire Engine S/No. 5022F130003 (2025). LCIT RT5120 A3 Vacuum Feeder (A3 Large Capacity Tray With Vacuum Feeder, 2 Trays, Capacity Up To 4,400 Sheets (80 g/m2)). BY5020 Multi Bypass Unit (Additional Feeder (No Vacuum Support) For Up To 500 Sheets, Maximum 216 g/m2 Uncoated; e.g. For Banner, Special Stock, Envelopes, Overhead Transparencies, Labels, Letterhead & Postcards). LCIT Vacuum Feed Banner Sheet Tray (Vacuum Supported Banner Pile Feeder Option, Max. Capacity 730 Sheets (Top Tray Front Loading Will Be Disabled), Media Format 489-700mm Up To 300 g/m2). LCIT RT5120 Multi Bypass Attachment Kit For Vacuum Feeder (Must Be Installed When Attaching Multi Bypass Unit To Vacuum Feeder). Multi Bypass Banner Sheet Tray (Mechanical Support For Long Sheets (Banner). Roll-Away Cart Type 5010/5040 (Additional Roll-Away Cart For The High Capacity Stacker). SK5040 High Capacity Stacker (Receives & Holds Up To 5,000 Sheets, One Roll-Away Cart 5010 Comes Standard For Easy Removing Of Large Stacks Of Printed Material). Output Tray For Banner Sheet Type (Mechanical Support For Long Sheets (Banner). SR511 0 Standard Finisher (Up To 3,000 Sheets Capacity (80 gsm), Stapling Up To 100 Sheet With Automatic Shortening Of Staples). NOTE: A loading fee will be added to buyer's invoice of £200 + VAT. Chjdpfxoz H U Hts Af Aoc With TCRU/ORU (Sets A & B) Spare Parts To Increase Uptime; Includes Charging Unit, Drum Cleaning Unit, Image Transfer Belt Cleaning & Lubrication Unit, Infeed-, Transfer & Paper-Separation-Rollers, (4) Photoconductor Drum, Fuser Belt Smoothing Roller Unit, Dust Filter, Fuser Cleaning Unit, Fusing Unit And Fusing Refresh Roller Unit, Versafire EP Toner (Black), Versafire EP Toner (Yellow), Versafire EP Toner (Magenta), Versafire EP Toner (Cyan), (3) Waste Toner Bottles, Empty Toner Bottle Collection Box, Matt Fuser Assembly Unit, Dell Optical USB Mouse, Dell Qwerty USB Keyboard, Cables, Versafire EP Branding Kit & Operating Instruction Manuals. Please note: Printer is now in storage and not under power. NOTE: A loading fee will be added to buyer's invoice of £200 + VAT.

Year of construction: 2016, condition: used, A complete bread production line with proofing equipment is offered. The production line consists of a total of nine documented components: WP Kemper lifting and tipping device HK200L, WP Haton conical rounder CR59-AT, WP Haton dough divider V300, WP Haton conveyor 500mm, WP Haton conveyor 1000mm, WP Haton intermediate proofer AF2002, WP Haton discharge conveyor with retracting belt, WP Haton long moulder Combi UL and WP Haton delay conveyor. Inspection possible by appointment. Csdez H Ur Aepfx Af Aohc

Condition: used, This Suter ZPM 2500, a Z-profile forming machine, will be auctioned off online in our industrial auction / machine auction, which includes clearance of warehouse stock of machines and equipment – plumbing – heating – ventilation – transport items and much more. Chedpfxez H Tmxe Af Asc You can find this and many other items on our platform.

Year of construction: 2023, condition: excellent (used), Manufacturer: Lemacher Hydraulik Model: Lifting Unit Type: 2000/700 E Year of manufacture: 2023 Used, very good condition Technical data according to the manufacturer: Drive: Electric motor 230V-50 Hz IP55 / 2.2 kW Pressure range: up to 700 bar Metering volume: 4 x 2000 cm³ Chjdpjz H R D Uofx Af Aec Cylinder type: single-acting Tank volume: 20.0 liters Accessories: 4 cylinders Dimensions (W x D x H): 102 x 84 x 96 cm Weight: 650 kg An inspection/collection is possible after prior arrangement.

Condition: used, functionality: fully functional, Manufacturer: Ultrasonic Cleaner Model: JP-360ST Equipment type: Ultrasonic cleaner Ultrasonic frequency: 40 kHz Heating power: 1,800 W Supply voltage: 180–265 V Tank capacity: 135 L Working tank dimensions: 50 × 60 × 45 cm Chedoz H Rlropfx Af Asc Overall dimensions: 70 × 80 × 80 cm Drain valve: Ball valve, 1" Timer control: Automatic timer shut-off Functions Ultrasonic frequency: 40 kHz Heating power: 1,800 W Adjustable operating time Automatic shut-off at the end of the cycle 1" ball drain valve

Condition: good (used), functionality: fully functional, Year of construction: 2025, Fiber optic splicing device Fujikura 45S with precision cleaver Fujikura CT50, all manufactured in 2025, including chargers, transport case, various consumables, and tools. The devices have the following total arc counts: 1330, 1484, 2258, 3084. The price is per device, and 4 units are available. Chsdpfxsz Hw Tie Af Aoc

Condition: used, For sale is a professional, industrial-grade painting station built with components from the renowned brand GRACO. The core of the system features two Endura-Flo™ 4D350 high-pressure pneumatic diaphragm pumps. These pumps are characterised by a best-in-class pressure ratio and exceptionally low fluid pulsation. Additionally, the station is equipped with two advanced Graco DataTrak™ control and monitoring panels, which control pump operation in real time, count cycles, and protect the system from running dry. The entire assembly is mounted on a heavy-duty, factory steel frame (stand). Technical Specifications: • Manufacturer: GRACO (USA) • Pump Model: Endura-Flo 4D350 • Quantity: 2 pumps included in the set • Pressure Ratio: 4:1 • Displacement Per Cycle: 350 cc (350 cm³) • Monitoring System: 2x Graco DataTrak (electronic control and runaway protection) • Compatible Fluids: Solvent-borne and waterborne paints, varnishes, lacquers, catalysts • Overall Dimensions of the Station: 152 x 237 x h=132 cm Csdpfx Afsz Hw Aqs Aohc

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: TR-A-16/2024, working height: 900 mm, workpiece weight (max.): 120 kg, total width: 1,400 mm, total length: 4,670 mm, total height: 3,550 mm, empty load weight: 550 kg, height adjustment type: mechanical, load capacity: 120 kg, table width: 3,500 mm, table length: 3,000 mm, We offer this ROL-PAS TR-A BOX machine for the assembly and testing of roller blinds, in like-new condition, manufactured in 2024. Manufacturer: ROL-PAS Model type: TR-A BOX Cedpjz Hmbisfx Af Ajhc Serial number: TR-A-16/2024 Date of manufacture: 12/2024 If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: used, Die Casting Injection Lines Chjdoz E Spvjpfx Af Aoc This lot consists of two complete die casting cells, dismantled, as follows: Die Casting Machine Colosio PFO 750, Year 2018; Hydraulic Press ABK-CP35; Melting Oven: Hindenlang SWLE-750, Year 2013; Spraying Robot AED DAG 1000; Industrial Robot Kuka KR 60; Spraying Robot: AED DAG 1000, Hydraulic Press; Die Casting Machine Colosio PFO 560 GL 2014; Command panel PDC 11; Industrial Robot Kuka; Optional dismantling and loading services are available on site

Year of construction: 1998, condition: used, 1998 Jesse V810-500 Vertical Hydraulic Press, 500 US Tons Capacity with Siemens Simatic HMI CNC Control (Electrics upgraded by Siemens in 2020) 453 Tonnes Capacity. Stroke Approx 2,750mm. Daylight Approx 3,500mm. Platen Dimensions Approx 3,000mm x 2,300mm, (Upper Platen 10,000kg, Bottom Platen 11,570kg). 3 Hydraulic Cylinders - (2) Outer Cylinders & (1) Inner Cylinder. Floating Bed. Brake Systems Side & Top. Stand Alone Electrical Cabinet. Charge Loader, Dimensions Approx 1,500mm x 4,000mm Long. Proximity Switches. Note: All Electrics Were Completely Stripped Out & Upgraded to Siemens by Oilgear UK in 2020. Chsdpfsz E R Svsx Af Ajc Walkway Platform & Access Ladders (Installed 2020). Cutting Bench with Foot Control, 415 Volt, Width of Cut Approx 1,700mm. Bramley Engineering LEN105 Pneumatic Height Adjusting 4-Suction Handling Unit. Dimensions of Machine Approx 3,910mm x 2,500mm x 8,670mm High. Weight Approx 40 Tonnes. Power 37.3kW, 415 Volt, 3 Phase. Maximum Pressure 248 Bar (3,600 PSI), Air 5.5 Bar (80 PSI). Note: Structure of Machine checked every 12 months - All Manuals, Paperwork/Invoices available to view. Note: Suitable Machine Dismantling & Electrical Disconnection Company Details Available. Pit Depth of approx 965mm required to hold the Lower Bolster. The Bolster is Equipped with (4) Mounting Pads.

Year of construction: 2004, condition: used, 2004 Kuntz 626 Single Bank Spotting Unit With Touchscreen Control Chjdoz E Rwfopfx Af Asc Table Dimension 430 x 400mm. With Safety Light Guards, Spare Parts & Manual. (2004).

Condition: excellent (used), Pro-Cast Series Model 121-M HED International Pro-Cast Series Model 121-M 14" Wide Capacity Thin Ceramic Tape Casting Machine, 12' to 100' Tape Length, 0.001" to 0.125" Tape Thickness Capacity, 180 Degree C Design Temperature Rating. S/No. 14138 Please Note: Packing and Loading Fee of £1,500 (+ VAT if applicable) will be applied to the buyer's invoice. This lot is located at 33, Shaftesbury Street South, Derby, DE23 8YH. Chsdoz E Rtmopfx Af Asc Working Width: 14 inches (approx. 356 mm). HED International Pro-Cast Series Model 121-M industrial thin ceramic tape casting machine, designed for the continuous production of high-quality ceramic and technical material tapes. Casting width: 14" (approx. 356 mm). Tape length capacity: 12'–100'.Tape thickness range: 0.001"–0.125" (approx. 25 µm–3.18 mm). Design temperature rating: 180°C. Suitable for ceramic tape casting and advanced technical ceramics. Suitable for laboratory, pilot-scale and production development applications. The Pro-Cast 121-M provides controlled casting of ceramic slurries over a wide range of tape thicknesses and is suitable for applications including technical ceramics, electronic ceramics, ceramic substrates, multilayer ceramic components and materials research.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, The Mécan'Outil TGV/S automated production line is designed for the assembly of roller shutter casings made from PVC and aluminum profiles. Chedpfxez E Nzco Af Ajc The machine was delivered to a production facility in 2021. The unit is in very good technical and visual condition, making it an excellent investment for companies involved in the production of roller shutter systems. Price: 85,000 EUR (negotiable) Detailed technical specifications are available in the attachments. Please contact us for further information and to arrange a viewing of the machine. This is a fully equipped production line that can quickly begin operation in a new facility. Highly recommended.

Condition: used, Year of construction: 2007, functionality: fully functional, operating hours: 800 h, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 16 A, type of input current: three-phase, temperature: 1,300 °C, inner dimension length: 450 mm, inner dimension width: 430 mm, inner dimension height: 600 mm, total length: 1,200 mm, total width: 800 mm, total height: 1,600 mm, overall weight: 330 kg, number of chambers: 1, control type: NC control, actuation type: manual, Used Nabertherm radiant furnace with C290 control system. Used in production for glass coating applications. Operating temperature was 350°C, maximum temperature is 1300°C. Age of the heating elements is approximately 5 years. Codpfx Ajz E Nptjf Aehc

Condition: excellent (used), functionality: fully functional, Power: 22 kW Csdpfx Afez E H Ere Aehc

Year of construction: 1980, condition: used, Rolling mill in working condition, designed for the production of hot-rolled metal products: reinforcing bars, rounds, squares, angles, flats, channels, and beams. Maximum initial blank diameter: 180 mm. It consists of a three-roll roughing stand with a diameter of 600 mm and five finishing stands with a diameter of 320 mm, as well as a calibrating three-roll stand with a diameter of 320 mm. High productivity. Cantilever-type rolling rolls are used. They are inexpensive to manufacture and can be quickly replaced when switching from one type of rolled product to another. Location: Ukraine, Sumy. Dismantling and loading are included in the price. Chedpfjz Eq Nuex Af Asc

Year of construction: 2014, condition: new, functionality: fully functional, New chamber for manufacturing silicone molds + curing oven. Csdpfoz Ep U Nex Af Aohc

Year of construction: 2007, operating hours: 11,749 h, condition: used, Empty weight: 9.100 kg Serial number: 17006585 Hours: 11749 X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 610 mm Table size: 1,600 × 550 mm Max. table load: approx. 600 kg Distance table–spindle nose: 160–770 mm Rapid traverse: up to 30,000 mm/min Spindle holder: HSK-A63 Spindle speed: 14,000 rpm Spindle cooling: Active Tool magazine: 46 positions Automatic tool changer: Yes Control: Heidenhain Machine weight: approx. 9100 kg Overall dimensions L×W×H: approx. 3000 × 2200 × 3100 mm Equipped with: Fehlman ATS 160 CNC, Blum P87.0634 laser system, Donaldson oil/mist filer DMC MMA, Fehlmann KM-Anlage HD coolant pump, burn engineering FD 2500-F11 cooling unit, Knoll 300 K-1 scraper belt conveyer Chodpfx Afoz Ep Eue Aec Online auction of mold making, die manufacturing machine tools (e.g. CNC surface grinding, turning and milling machines FEHLMAN, HEDELIUS, ABA, G+H, SUNNEN, BIGLIA, OKUMA etc.) due to the full plant closure of metal working company location Meusburger Germany GmbH at Viernheim (near Mannheim) in Germany. The online auction opens Thursday 24 September and closes Tuesday 13 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Thursday 8 October Pickup day is on: - Monday 19 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 2005, condition: used, Empty weight: 22.000 kg Dimensions (LxBxH): 740 x 450 x 400 cm Serial number: 11191 X-axis travel: 2,500 mm Y-axis travel: 1,000 mm Z-axis travel: 770 mm Table size: 3,220 × 1,000 mm Max. table load: approx. 3,000 kg Spindle holder: SK 50 Spindle speed: 20–8,000 rpm Codpfxsz Ep Ebo Af Ajhc Tool magazine: 50 positions Control: Heidenhain iTNC 530 Internal coolant: Yes Chip conveyor: Yes Electronic handwheel: Yes Magnetic clamping plates LxW: 4x 950x600mm Machine weight: 22000 kg Overall dimensions LxWxH: 7400x4500x4000mm Equipped with: paper filter, 2x oil-mist filter, 2x probe receiver, various tooling in the magazine, documents. Online auction of mold making, die manufacturing machine tools (e.g. CNC surface grinding, turning and milling machines FEHLMAN, HEDELIUS, ABA, G+H, SUNNEN, BIGLIA, OKUMA etc.) due to the full plant closure of metal working company location Meusburger Germany GmbH at Viernheim (near Mannheim) in Germany. The online auction opens Thursday 24 September and closes Tuesday 13 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Thursday 8 October Pickup day is on: - Monday 19 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 2012, condition: used, Empty weight: 10.900 kg Length: 90 cm Serial number: 163562 Max. turning diameter: 630 mm Max. turning length: 900 mm Max. workpiece diameter: approx. 450 mm Main spindle: A2-8 Main spindle speed: 45–5000 rpm Main spindle power: 15 / 11 kW Chedjz Ep D Ropfx Af Aec Main spindle bore: approx. 79 mm Sub-spindle speed: up to 5,000 rpm Sub-spindle power: 15 / 11 kW X-axis travel: 580 mm Y-axis travel: 160 mm mm) Z-axis travel: 935 mm B-axis range: 225° (-30° to +195°) B-axis resolution: 0.001° C-axis: 360° C-axis resolution: 0.001° Milling spindle speed: 6,000 rpm Milling spindle power: approx. 11 kW Tool holder: HSK-A63 Tool magazine: 60 positions Automatic tool changer: Yes Control: Okuma OSP-P300S Main chuck: Hainbuch Spanntop nova Secondary chuck: Hainbuch Spanntop nova Equipped with: oil-mist filter, tool pre setter Machine weight: approx. 10,900 kg Overall dimensions L×W×H: approx. 4,216 × 2,286 × 2,591 mm Online auction of mold making, die manufacturing machine tools (e.g. CNC surface grinding, turning and milling machines FEHLMAN, HEDELIUS, ABA, G+H, SUNNEN, BIGLIA, OKUMA etc.) due to the full plant closure of metal working company location Meusburger Germany GmbH at Viernheim (near Mannheim) in Germany. The online auction opens Thursday 24 September and closes Tuesday 13 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Thursday 8 October Pickup day is on: - Monday 19 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 1999, condition: ready for operation (used), functionality: fully functional, Equipment: 3rd hydraulic function, Complete line for the production of stator and rotor packages, and an assembly line for assembling finished electric motors. Cjdpfx Ajz Epz Nef Ashc The stator line consists of a manual workstation for producing packages, inserting slot insulation, inserting wedges, wire winding on a winding machine, a control machine, and a dielectric strength testing machine. The rotor line consists of a manual workstation for making rotor packages, a machine for applying insulating plastic, a machine for manual collector installation, a winding machine for wire winding, a manual workstation for rotor inspection, and a machine for rotor varnishing. Also included is an assembly line for assembling complete electric motors. The lines are sold in working condition and are ready for operation.