Ollitec Maschinenservice

Condition: repair required (used), Year of construction: 1978, functionality: not functional, machine/vehicle number: 212 393, ram adjustment: 100 mm, pressing force: 160 t, stroke adjustment: 80 mm, overall weight: 18,000 kg, punching force: 160 t, We are offering this Haulick-Roos RVD160-1250 stamping press, manufactured in 1978, which requires repair. Pressing force during continuous operation: approx. 1600 kN Max. distance between table and ram: 350 mm Distance between the uprights along the length: 1250 mm Opening on the uprights, width x height: 640 x 460 mm Through hole in the table: 1000 x 250 mm Ram surface, width x depth: 1200 x 900 mm Dowel bore in the ram, diameter x depth: 50 mm Adjustable ram stroke: 20 – 100 mm Ram adjustment: 100 mm Stroke adjustable in infinitely variable steps: 50 – 300 mm Drive power: 22 kW Weight: approx. 18,000 kg incl. uncoiler and feed machine Uncoiler with feed machine: Manufacturer: Schleicher Type: 6-70 RM 76 Max. coil weight: Strip thickness: 0.5 – 4 mm Max. coil width: 650 mm Max. coil diameter: 1400 mm Power: 5.5 kW Year of manufacture: 1978 Feed and control: Including pre-piercing software ASTA All data are approximate. Technical specifications/equipment are non-binding and without guarantee. Iodpszdf Utefx Anvjau The machine is sold without any warranty or guarantee. Sale exclusively ex works, for dismantling or at additional cost. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2004, Kaiser Press KSTU 1600 - 15 - 3 PSR Pressing force 1,600 kN Stroke rate 20 - 260 1/min Stroke height 20 - 120 mm Ram adjustment 120 mm Table area 1,250 x 900 mm Installation height 400 mm Includes ARKU strip processing line. Iaedjzcc Rpepfx Anvsu

Condition: excellent (used), Year of construction: 2005, Manufacturer: Helmerding Presse Press force: 5,000 kN Stroke adjustment: 97–400 mm Strokes per minute: 10–80 1/min Tool installation height: 800 mm Ram adjustment: 200 mm Ram area: 3,000 x 1,400 mm Table area: 3,000 x 1,400 mm Iedpfx Aszccfmsnvoau Motor power: 90 kW Press weight: 120,000 kg Including transfer and coil line.

Condition: excellent (used), Year of construction: 2001, HELMERDING Press KDH 400/2600/2 Pressing force 4,000 kN Stroke rate 15-60 strokes/min Stroke adjustment 80-250 mm Slide adjustment 175 mm Installation height 550-800 mm Table area 2,500x1,600 mm Slide area 2,500x1,400 mm Pass-through hole in the press table 1,300x800 mm Weight 106,000 kg Lorenz Strip Line EWH 600/150 Strip width 80-600 mm Ijdszccd Nepfx Anvjau Strip thickness 0.6-6.0 mm Max. coil weight 7,500 kg

Condition: excellent (used), Year of construction: 2010, Helmerding Press Type: KDH 315/2100/2 Pressing force: 3,150 kN Isdpfxezccdvj Anvsau Stroke height: 40–200 mm Strokes per minute: 20–100 min⁻¹ Ram adjustment: 120 mm Shut height: 500 mm Table size: 2,000 x 1,200 mm Ram surface: 2,000 x 1,100 mm Machine weight: 44,000 kg Helmerding Roller Feeder Type: EWH 800/150 Strip width: 100–800 mm Strip thickness: 0.5–6.0 mm Helmerding Straightening Machine Type: R-70/800/9-S Strip width: 100–800 mm Strip thickness: 0.5–5.0 mm Roll diameter: 70 mm Number of straightening rolls: 9 pcs Helmerding Decoiler Type: HE-4/800/MOT/HYD Strip width: 100–800 mm Max. coil weight: 4,000 kg Coil inner diameter: 508 mm Coil outer diameter: 1,000–1,600 mm

Condition: excellent (used), Year of construction: 2019, Mossini Press Press force: 4,000 kN Stroke rate: 28/82 rpm Stroke height: 250 mm Ram adjustment: 350 mm Shut height: 900 mm Table size: 2,850 x 1,300 mm Iaodpfxezcccfs Anvsu Millutensil Coil Line Strip width: 100–800 mm Strip thickness: 0.5–4.0 mm Coil carrying capacity: 10,000 kg

Condition: like new (used), Year of construction: 2019, Mossini Transfer Press PDM/4BLD Pressing force: 2,000 kN Table area: 6,000 x 2,500 mm Slide area: 6,000 x 2,500 mm Stroke height: 900 mm Strokes per minute: 10 - 25 1/min Slide adjustment: 400 mm Overall height: 1,270 mm Iasdpfxezb H Shj Anvju TOTAL STROKES: 1,000,000 strokes NORDA Transfer X-axis travel: 0 - 1,200 mm Y-axis travel: 0 - 1,125 mm Z-axis travel: 350 mm Max. transport weight: 200 kg Mill tool strip system Strip width max. up to 1,850 mm Strip thickness: 0.5 - 3.0 mm Coil load capacity: 24,000 kg

Condition: like new (used), The Kaiser RS 2 XA reproduction stand features a non-reflective, matte gray base plate. This plate has a printed grid with centimeter and inch markings. The stand also includes an anodized aluminum profile tube column with centimeter and inch markings. The column can be rotated by 180 degrees. Iasdjzbxy Ropfx Anvju Features of the Kaiser reproduction stand RS 2 XA: • Base plate: 40 x 50 x 2.5 cm (W x D x H) • Column height: 76 cm • Load capacity: max. 1.5 kg

Condition: excellent (used), Year of construction: 1985, pressure 25 t Iaedpfx Anjzbu Spjvsu

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, This SCHAAL SEP 80 (Machine No. 00-1564, built 2000 at A. Schaal GmbH & Co., Salach/Württemberg, Germany) is a precision eccentric press engineered for demanding high-volume stamping work. Built around a vibration-damped O-form double-column cast frame, it delivers the rigidity and dimensional stability required for fine-blanking, progressive die stamping, and high-tolerance production runs where part quality cannot drift across the shift. This press comes equipped with the matched SCHAAL SWV 3E roll feeder, so it's ready to run as a complete coil-fed stamping line out of the gate: Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm. Ijdpezab Ibefx Anvjau Manufacturer A. Schaal GmbH & Co. Werkzeug- u. Maschinenbau Type SEP 80 Year of manufacture 2000 Machine number 00-1564 CE marking Yes Press force 800 kN Adjustable stroke 8–80 mm Distance table-to-ram (max, ram down, with bolster) 310 / 355 mm Ram adjustment 80 mm Ram dimensions 500 × 400 mm Ram bore Ø 50 × 90 mm Ram keyway 30 H7 mm Table size 830 × 700 mm Bolster plate thickness 80 mm Through-hole in table 500 × 200 mm Strip pass line over table (with bolster) 120 mm ± 40 mm Total installed power 26 kW Supply voltage 3 × 400 V, 50 Hz Rated current 40 A Pre-fuse 50 A Weight 8,000 kg Feeder SCHAAL SWV 3E roll feeder Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm

Condition: used, Year of construction: 1990, operating hours: 83,000 h, functionality: fully functional, Complete precision stamping line ready for relocation. Centre piece is a BRUDERER BSTA 50HL (500 kN, year 1990, Kom. 9443) equipped with control and Unidor tool and press safety monitoring system. The line includes a sound-insulating safety cabin, finished-parts output conveyor, Soprem H1000/1000ZV/10M/LK.LF/N1/G coiling machine (2003), and Soprem BR19/160/12/U Straightening machine (2003). Available as a complete turnkey lot. Ijdpfxsy S E U Ro Anvjau Technical Specifications Press Manufacturer BRUDERER AG, Frasnacht, Switzerland Machine Model: BSTA 50 HL Serial / Commission No.: Kom. 9443 Year of Manufacture: 1990 Operating Hours: 82,600.0 h (as shown on press control) Total Weight approx.: 8,700 kg Sound Enclosure / Cabin Included: W 3,460 × L 2,331 × H 3,910 mm Stroke range (adjustable): 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range: 64 mm Tool opening width (max.): 950 mm Bolster plate — Width × Depth: 930 × 650 mm Baseplate opening W × D: 900 × 200 mm Strip feed height (adjustable): 60 – 140 mm Max. strip pass-through width: 250 mm Feeding device: BBV 195 - 85 Feeding angle: 90 degrees Max. Strip thickness: 4 mm Max. Strip width: 160 mm Feed length: 0 – 85 mm Supply voltage: 3 × 400 V / 50 Hz Main motor power: 28 kW Control voltage (DC): 24 V DC Pneumatic supply: 6 – 10 bar (R ½" connection) Press width (with feeder) approx. 2,471 mm Press depth approx. 1,302 mm Press height approx. 3,165 mm Including Soprem H1000/1000ZV/10M/LK.LF/N1/G coiling machine (2003) Including Soprem BR19/160/12/U Straightening machine (2003) Includign Unidor press and Tool Safety System Finished-parts output conveyor belt Sound-insulating safety cabin / enclosure Original technical documentation and schematics

Condition: like new (used), Year of construction: 2008, PE 100 D; Manufacturer: PME, Year of construction: 2008 Nominal Pressing Force: 1,000 kN Ram Adjustment: 80 mm Adjustable Ram Stroke: 10...90 mm Continuously Adjustable Strokes per Minute: 40...140 / min Tool Installation Height (at maximum stroke bottom and adjustment top): 380 mm Table Clamping Surface (W x D): 900 x 560 mm Ram Clamping Surface (W x D): 900 x 560 mm Lateral Passage (W x H): approx. 365 x 575 mm Main Motor Power: 11.0 kW Machine Height: approx. 3,240 mm Machine Weight: approx. 8,600 kg Equipment: H-frame, motorized ram adjustment, fully automatic stroke adjustment Infinitely variable stroke speed control (ABB) Siemens S7/300; Pilz press safety control Touch screen in movable operator panel Electronic press force measurement Central lubrication Stroke gate Split, movable table plate Centering groove in ram Anti-vibration mounts Iedpfx Anoy Sku Asvoau Roll Feed: Band width 200 mm, band thickness: 2 mm Decoiler: driven, ultrasonic band loop control, manual expansion Coil weight: 600 kg

Condition: used, Year of construction: 1978, pressure 40 t stroke 8 - 50 mm no. of strokes 50 - 300 /min distance between columns 600 mm dayligth (stroke and adjustment up) 285 mm column travel -side 280 mm table surface area 590 x 500 mm hole in the table 590 x 40 - 100 mm Iaodpfx Aney Rurcsvju table height over floor 860 mm ram surface 590 x 380 mm ram adjustment 80 mm material width 200 mm material thickness - 2,5 mm feed length 160 mm power requirement 7,5 kW dimensions of the machine ca. 1,8 x 1,2 x 2,1 mxmxm AS SPARE PARTS DISPENSER

Condition: excellent (used), Year of construction: 2013, Mossini press Press force: 10,000 kN Stroke rate: 20–55 rpm Stroke height: 350 mm Ram adjustment: 300 mm Shut height: 1,450 mm Iajdpfxey Rrwps Anvou Table size: 4,500 x 2,500 mm 2 sliding tables Millutensil coil line Strip width: 250–1,850 mm Strip thickness: 0.5–4.0 mm Coil load capacity: 24,000 kg

Condition: used, Year of construction: 1994, table length: 1,780 mm, table width: 1,250 mm, pressing force: 320 t, High-performance mechanical punching press with coil line for strip material processing in series production. Manufacturer: Kaiser Pressen Model: KSTU 3150-15 R Machine type: Punching press Year of manufacture: 1994 Press force: 3150 kN Drive type: Mechanical Stroke rate: 20 – 120 spm Ram stroke: 20 – 150 mm Ram adjustment: 150 mm Table area: 1780 x 1250 mm Ram area: 1500 x 1000 mm Shut height: 565 mm Max. tool weight: 3000 kg Strip width: 30 – 800 mm Strip thickness: 0.5 – 3 mm Max. strip thickness: 4 mm Isdpfx Aoy Ndyaonvsau Strip entry height: 160 – 260 mm Strip speed: 4 – 30 m/min Straightening rolls: 9 pcs Feed accuracy: ± 0.1 mm Coil inner diameter: 508 mm Coil outer diameter: 1000 – 1500 mm Supply voltage: 3 x 400 V Air pressure: 5 bar Location: Radeberg

Condition: excellent (used), Complete production line for sale for manufacturing round metal rainwater drainage systems. Production starts from a sheet metal coil, then forms, stamps, and packages the products. All machines are in very good condition. The equipment is fully assembled and intended for mass production of: - Gutters - Gutter ends - Connectors - Corners - Brackets - Downpipe outlets - Elbows - Downpipes - Branch connectors (Tees) - Packaging Isdpfey I Tq Sex Anvsau If you are interested in the offered equipment, have any questions, or would like to receive more detailed information, please do not hesitate to contact us. We will gladly provide the full equipment list, technical specifications, additional photos, or arrange an inspection of the production line. All equipment is connected and can be inspected in operation to see the full production process.

Condition: used, Year of construction: 2017, functionality: fully functional, We are selling our punching machines due to relocation. They are in good and fully operational condition. The machines can be collected at any time from our facility in Königsbach-Stein. Iodpfx Anoy Emnrsveau

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, Completely overhauled BRUDERER high-speed stamping press BSTA125 incl. new press control system Technical data: Tonnage: 1250 kN Tooling opening: 1170 mm Strokes per minute: 100–850 SPM (depending on selected stroke) Adjustable stroke: 16, 19, 26, 35, 43, 51, 58, 64, 70, 75 mm Ram adjustment range: 89 mm Tool installation height: 268–386.5 mm (depending on selected stroke) Bolster plate: 1150 x 1070 mm Iajdpfxjy D H H Es Anvju Ram area: 1040 x 600 mm Strip pass width: 440 mm Base plate opening: 1120 x 350 mm Strip entry height: 80–180 mm Strip feed direction: left to right Feeder: servo feed

Condition: used, Year of construction: 2014, operating hours: 10,100 h, functionality: fully functional, machine/vehicle number: 12410, total height: 2,900 mm, ram adjustment: 40 mm, total width: 1,550 mm, total length: 2,000 mm, table length: 580 mm, table width: 460 mm, pressing force: 25 t, control cabinet height: 1,800 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, overall weight: 4,700 kg, DGUV certified until: 01/2027, We offer a used punching machine of the type Mabu VS251/RC11 from the year 2014. The machine is in good used condition and ready for immediate use. Manufacturer: Mabu Model: VS251/RC11 Year of manufacture: 2014 Iaedpfx Aeyzl Txjnvou Condition: used Machine type: Punching machine Additionally, the machine is equipped with a high-quality roller feeder from Zehnder & Sommer (model EV12-22TK, year 2019), ensuring precise and reliable material feeding. If you have any questions or require further information, we are always happy to assist you. Please feel free to contact us by message or by phone. All information without guarantee. Subject to errors, changes, and prior sale.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1002650004, total height: 3,170 mm, ram adjustment: 60 mm, installation height: 270 mm, table height: 1,300 mm, total width: 2,875 mm, total length: 2,875 mm, drop-through hole in table: 150 mm, table length: 1,250 mm, table width: 550 mm, pressing force: 50 t, control cabinet height: 2,200 mm, control cabinet length: 1,800 mm, control cabinet width: 600 mm, stroke adjustment: 60 mm, clearance between the columns: 1,290 mm, working width: 1,250 mm, distance between side stands: 260 mm, distance between stands: 1,690 mm, overall weight: 9,900 kg, punching force: 50 t, RASTER punching system RST 500-1250 DH with soundproof cabin and tool monitoring. The machine is in good condition. Stroke rate: 50 – 800 spm. Previously operated in single-shift mode. The machine can be inspected under power. Price on request. Iedpfx Aeyyvgtsnvoau

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1002570003, total height: 3,450 mm, ram adjustment: 80 mm, installation height: 270 mm, table height: 1,280 mm, total width: 1,700 mm, total length: 3,065 mm, drop-through hole in table: 210 mm, table length: 1,500 mm, table width: 750 mm, pressing force: 63 t, control cabinet height: 2,200 mm, control cabinet length: 1,800 mm, control cabinet width: 600 mm, stroke adjustment: 80 mm, clearance between the columns: 1,540 mm, working width: 1,500 mm, distance between side stands: 360 mm, distance between stands: 2,020 mm, overall weight: 17,000 kg, punching force: 63 t, RASTER punching system RST 630-1500 DH with soundproof enclosure and tool monitoring. The machine is in good condition. Stroke rate: 30 - 700 1/min. Operated in single-shift operation. The machine can be inspected under power. Price on request. Iaodpfoyyppbex Anveu

Condition: used, Year of construction: 1990, pressure 160 t stroke 20 - 120 mm no. of strokes 30 - 180 /min distance between columns 1510 mm Iajdpfxjyx Ii De Anvsu column travel -side 400 mm dayligth 820 mm table surface area 1430 x 900 mm hole in the table 1010 x 320 mm table height over floor 890 mm ram surface 1300 x 800 mm ram adjustment 100 mm material width 20 - 400 mm material thickness 0,3 - 5,0 mm feed length 1,0 - 9999,9 mm power requirement 52,0 kW weight of the machine ca. 29,0 t dimensions of the machine ca. 3,7 x 2,5 x 4,0 mxmxm with infinitely variable drive, back gears, pneumatic clutch/brake combination, hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, bolster plate, motoric centralized lubrication, electronic press force monitoring electronic roll feed Type KWV 400 ZDH 120 (YOM 2003), band-material oiler

Condition: used, Year of construction: 1995, operating hours: 42,416 h, functionality: fully functional, machine/vehicle number: 10317, total height: 3,100 mm, feed length X-axis: 120 mm, ram adjustment: 64 mm, table height: 1,250 mm, pressing force: 50 t, stroke length: 16 mm, stroke adjustment: 51 mm, clearance between the columns: 1,200 mm, DGUV certified until: 06/2026, year of last overhaul: 2025, For sale is a Bruderer BASTA 50 UL, a high-performance stamping press designed for precise and reliable results in series production. Thanks to its continuous operation, the machine is in technically perfect and immediately operational condition. All maintenance and repair work has been carried out regularly and carefully. Technical data: Rated force: 500 kN Stroke rate: 100-1120 strokes per minute Iedpfjyu Sn Iox Anvoau Feed: BBV 202/120 Adjustable stroke: 16 - 51 Installation space / clamping plate: 760-940 mm Main drive // kW: 22 kW Power connection: 400 V / 50 Hz Adjustable stroke: 16-51 Ram area: 980 x 420 mm Table area: 940 x 580 mm Adjustable strip entry height: 50-140 mm Max. strip width: 203 mm Max. material thickness: 2 mm Machine dimensions: 2700 x 1800 x 3100 mm Weight: 8150 kg "Main drive on (actual operating time): 42,416 hours Optionally, a soundproof cabin can be purchased.

Condition: used, Year of construction: 1994, operating hours: 28,067 h, functionality: fully functional, machine/vehicle number: 10000, total height: 3,460 mm, feed length X-axis: 200 mm, ram adjustment: 76 mm, table height: 1,200 mm, total width: 1,750 mm, total length: 1,840 mm, table length: 970 mm, table width: 910 mm, stroke length: 16 mm, stroke adjustment: 63 mm, clearance between the columns: 1,230 mm, DGUV certified until: 06/2026, year of last overhaul: 2025, For sale is a Bruderer BASTA 80H, a proven and high-performance stamping press for maximum precision and reliability in series production. Due to its continuous use in production, the system is in technically perfect and operational condition. Maintenance and servicing have been carried out regularly. Technical highlights (excerpt): Machine type: Bruderer BASTA 80H Application: High-precision stamping in series production Condition: Technically perfect, immediately ready for use Availability: By arrangement / from week 17/2026 Ijdpfxoyu Nipo Anvoau An optional soundproof cabin can be purchased. Technical details: Rated force: 800 kN Stroke rate: 100-1000 strokes per minute Feed system: BBV 320/200 Adjustable stroke: 16 - 63 Installation space / clamping plate: 970 mm Main drive // kW: 43 kW Power connection: 380 V / 50 Hz Ram area: 760 x 510 mm Table area: 950 x 910 mm Strip feed height adjustable: 80 mm - 180 mm Max. strip width: 360 mm Max. material thickness: 3 mm Machine dimensions: 2834 x 1742 x 3460 mm Weight: 15550 kg

Condition: used, Year of construction: 1971, pressure 40 t stroke . mm no. of strokes . Hub/min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Iasdjyutuispfx Anvou About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team