Innovation in Holz

Condition: used, Year of construction: 2005, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, inner dimension length: 800 mm, inner dimension width: 1,200 mm, inner dimension height: 200 mm, total length: 1,400 mm, total width: 1,530 mm, total height: 1,670 mm, fuel type: electric,

Condition: excellent (used),

Condition: good (used), Year of construction: 1987, machine/vehicle number: A20072, Offer 26300 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 12 mm - Cutting angle adjustable, motorized 0.5 - 3° - Manual cutting gap adjustment - Number of hydraulic clamping bars 18 pcs - Motorized rear stop 10 - 1000 mm - Front angle stop - Number of strokes per minute, depending on cutting angle and cutting length 7 - 17 Nwjdezw Dt Hspfx Am Usk - Hydraulic drive 400 V / 22.5 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 8500 kg - Includes: - Foot switch - Cutting line illumination

Condition: excellent (used), CATALOGUE NUMBER: 6145 TECHNICAL DATA - max. width of the workpiece: 1100mm - max. height of the workpiece: 140mm 3 units: 1) grooved rubber roller for calibrating, 15kW 2) grooved rubber roller for calibrating, 11kW 3) grooved rubber roller for calibrating, 11kW Top: - sliding metal roller - sliding rubber roller - unit - 2 sliding rubber rollers - unit - 2 sliding rubber rollers - unit - sliding rubber roller Bottom: - feeding table, 3600x1000mm - feed speed adjustable via frequency inverter, 0.25kW - conveyor belt - 3 sliding rubber rollers, guiding - pneumatic belt oscillation with photoelectric sensors - belt blowing - electric table lifting - lifting motor 0.75kW - stepless feed speed adjustment - feed motor 2.2kW - with vacuum pump - pump motor 4kW - extraction nozzle diameter 110mm, 80mm Nwjdpfszw Dtmox Am Uek - working pressure 6-8 bar - extraction nozzle diameter 3x150, 3x200mm - overall machine dimensions (L/W/H): 3400x2300x2800mm - feeder dimensions (L/W/H): 3000x1300x900mm - pump dimensions (L/W/H): 600x950x940mm - weight approx. 5000kg Net price: 32900 PLN Net price: 7833 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to significant fluctuations)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, IVECO DAILY 35S14 WITH TLE 14 AERIAL PLATFORM Iveco Daily 35S14 fitted with a TLE 14 aerial platform, registered in November 2020 and with only 14,000 km. A professional vehicle, ready for use, ideal for maintenance, electrical installations, public lighting, pruning, and work at height. VEHICLE SPECIFICATIONS • Registration: 11/2020 • Mileage: 14,000 km • Model: Iveco Daily 35S14 • Transmission: manual • Rearview camera • Overall length: 6,300 mm AERIAL PLATFORM SPECIFICATIONS • Model: TLE 14 • Operating hours: 93 • Maximum extension: 12.20 meters • Maximum load capacity: 120 kg WARRANTY 24-month warranty included. PRICE €36,000.00 + VAT Nsdpfx Aezw Dtgem Uewk

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 800 mm, total height: 2,813 mm, total width: 2,623 mm, table width: 500 mm, table length: 500 mm, overall weight: 11,430 kg, spindle speed (max.): 18,000 rpm, tool weight: 12,000 g, product length (max.): 5,769 mm, number of axes: 4, This 4-axis Mazak HCN-5000 was manufactured in 2024. It features an X-axis travel of 730 mm, Y-axis travel of 730 mm, and Z-axis travel of 800 mm. The machine has a maximum workpiece weight of 700 kg and a spindle speed of 18,000 RPM. If you are looking to get high-quality machining capabilities, consider the Mazak HCN-5000 horizontal machining centre we have for sale. Contact us for further details. • Quantity/configuration: 5 machines total; identical configuration except tool changer capacity: • 3 machines with 40 tools • 1 machine with 60 tools • 1 machine with 80 tools • Control unit: Smooth G • Pallet size: 500 x 500 mm • Max. workpiece dimensions (L x W x H): D. 800 x 1000 mm • Table surface: Tapped holes • Max. workpiece weight: 700 kg • Rapid traverse (X/Y/Z): 60,000 mm/min • Max. tool diameter: D. 95 mm / D. 170 mm • Max. tool length: 170 mm • Tool selection method: Fixed • Tool change time: 2.8 s • Coolant pressure: 15 bar • Coolant tank capacity: 500 L Nwsdpfozw Dtasx Am Ujk Additional equipment • Tsubakimoto Mayfran ConSep 2000 chip conveyor/separator • Butti chip container • Mist collector line setup Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2010, Model: Wittmann Tempro TP+D-S-2:160 Type: Dual-zone pressurized water temperature control unit Max temperature: 160 °C Heating power: approx. 9 kW per zone (up to 12–16 kW optional) Pump: Magnetically coupled, 40–60 l/min, up to 4.5–6 bar Medium: Water (pressurized system) Cooling: Plate heat exchanger, cooling water G 3/8″ Njdpfxszw Drve Am Uowk Mould connections: G 3/4″ Voltage: 3 × 400 V / 50 Hz Control accuracy: ±0.2 °C Zones: 2 independent circuits Features: Automatic filling, pressure monitoring, leak-free pump, mold purging, SSR heater control Options included: SO-C safety package + S-PLUS D 160 performance upgrade Dimensions: approx. 880 × 550 × 1000 mm Weight: approx. 95–120 kg

Condition: excellent (used), Catalogue number 7985 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 50mm - Silo diameter: 1000mm - Output: up to 10 briquettes/min, up to approx. 90 kg/h - Automatic machine operation - Motor: 5.5kW - Dimensions (L/W/H): 1720x1100x1500mm - Weight: approx. 650kg ADVANTAGES Nsdpfszw Drpox Am Uswk – Italian made – Used briquetting press – Not repainted – Very good condition Net price: 32,900 PLN Net price: 7,830 EUR (at an exchange rate of 4.2 EUR) (Prices may change with significant fluctuations in exchange rates)

Condition: new, Catalogue number H0548 - New machine, in stock - CE certificate - Cutting length: 3200 mm - Cutting width: 1150 mm - Cutting height 90°/45°: 80/55 mm - Max. blade diameter: 305 mm - Blade adjustable up/down and at 45° angle - Scoring blade diameter: 120 x 20 mm - Main saw speed: 4500, 5500 rpm - Scoring saw speed: 8000 rpm - Motor: 5.5 kW / 400 V - Scoring motor: 1.1 kW - Carriage guided on steel rods Overall dimensions: - Length: 3220 mm - Width: 3150 mm - Height: 900 mm - Weight: 700 kg Nwjdpezw Dnqofx Am Uok - Mechanical height adjustment - Mechanical tilt adjustment - Table extension - Table widening - Angle cutting fence - Includes main blade and scoring blade Net price: 20,320 PLN Net price: 4,990 EUR Net price calculated at exchange rate 4.1 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2017, loading space length: 11,150 mm, loading space width: 2,550 mm, loading space height: 3,800 mm, loading space volume: 31 m³, total length: 12,240 mm, total width: 2,550 mm, total height: 3,800 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 8,290 mm, Year of construction: 2017, Equipment: ABS,

Condition: excellent (used), CATALOGUE NUMBER: 8026 TECHNICAL DATA: - Max. cutting length: 3100 mm - Max. cutting height: 80 mm - Max. cutting width: 570 mm - Main saw motor power: 10 kW - Blade diameter: 450 mm - Work table height: 850 mm - Work table width: 660 mm - Dust extraction port diameter: 1x160 mm, 1x170 mm - Overall dimensions (L/W/H): 5500x2100x1600 mm - Weight: approximately 2500 kg ADVANTAGES: - Suitable for trimming boards - Used saw, very good condition Nedozw Dkfjpfx Am Uewk Net price: 29900 PLN Net price: 7119 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: reconditioned (used), functionality: fully functional, operating pressure: 250 bar, high-pressure hose length: 10 mm, input voltage: 400 V, overall weight: 62 kg, warranty duration: 6 months, KARCHER HD 10/25-4S PRESSURE WASHER NEW PUMP HEAD The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 250 bar and 1000 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply: 3 phase - 400 V - 50 Hz Discharge capacity (l/h): 1000 Operating pressure (bar): 250 Maximum pressure (bar): 275 Connected power (kW): 9.2 Weight (kg): 62 Dimensions (L x W x H) (mm): 560 x 500 x 1090 Hose length (m): 10 Cleaning agent tank capacity (l): 6 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW adjustable nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE Nwedpfxezw Di Uj Am Ujk KEY FEATURES: Open oil system - no operating time limits Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to use servicing

Condition: good (used), Year of construction: 1988, machine/vehicle number: 802107, Offer 26307 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable, motorized 0.5 - 3° - Cutting gap adjustment by hand - Number of hydraulic clamping devices 18 pcs - Motorized rear stop 10 - 750 mm - Front angle stop + support arms Njdpfx Amszw Di Io Uswk - Number of strokes per minute, depending on cutting angle and cutting length 9 - 17 - Hydraulic drive 400 V / 7.5 kW - Table height 770 mm - Space requirement including rear stop, excluding front support arms approx. W 3750 x H 1600 x D 1650 mm - Weight approx. 4500 kg - including: - Foot switch - Cutting line illumination

Condition: excellent (used), CATALOG NUMBER 7679 TECHNICAL DATA - Maximum planing width: 610 mm - Maximum planing height, double-sided: 200 mm - Electrically adjustable table height (up/down) - Maximum planing height, four-sided: 100 mm Top section: - Driven infeed shaft, toothed - Kickback devices - Pressure unit - 2 driven shafts, toothed - Pressure unit - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure unit - Outfeed driven shaft, smooth Bottom section: - Guide bar - Driven roller, toothed - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth driven rollers Rear section: - 2 side spindles with pressure unit 1) Right vertical, 100 mm, 4 kW 2) Left vertical, 100 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable vertically and horizontally - Manual planing width adjustment - 6 feed rates: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Dimensions (L/W/H): 2500 x 1800 x 600 mm - Weight: approx. 3000 kg Nwsdpfozw Dinex Am Uek FEATURES - Perfect for log, flooring, and similar applications - Manufactured by German brand KUPFERMUHLE - 2 horizontal planing shafts + 2 vertical spindles - Used planer, in very good condition Net price: 56,900 PLN Net price: 13,550 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: excellent (used), Catalog number 7431 TECHNICAL DATA Njdpfjzw Dibex Am Uewk - max. width of the workpiece: 950 mm - max. height of the workpiece: 150 mm From above: - metal roller, pressure roller - unit (fluted rubber roller for calibrating + shoe + metal roller) - metal roller, smooth, sliding roller From below: - conveyor belt - pneumatic belt oscillation with photocells - electric table lifting - 2 types of feed speed - main motor: 7.5 kW - feed motor: 0.6 kW - table lifting motor: 0.18 kW - working pressure: 8 bar - diameter of the dust extraction nozzle: 150 mm - dimensions (L/W/H): 1600x1250x2000 mm - weight: 1109 kg ADVANTAGES - German production - additional shoe included - used grinder, very good condition Net price: 19,900 PLN Net price: 4,738 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), functionality: fully functional, machine/vehicle number: ZCFM62AV20C530029, mileage: 1,17,346 km, power: 387 kW (526.17 HP), first registration: 03/2024, fuel type: diesel, empty load weight: 6,870 kg, maximum load weight: 11,130 kg, overall weight: 18,000 kg, tire size: 385/55 + 315/70 R 22.5, axle configuration: 4x2, wheelbase: 3,790 mm, next inspection (TÜV): 04/2027, fuel: diesel, fuel tank capacity: 710 l, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, Year of construction: 2024, Equipment: ABS, EBS, air conditioning, central locking, cruise control, differential lock, electronic stability program (ESP), fridge, lane keeping assist, navigation system, parking air conditioner, parking heater, power assisted steering, seat heater, traction control, Our vehicle number #30668 Active Space cab Euro VI 530 hp Njdpfx Aezw Dh Rom Uowk 4x2 Wheelbase 3,790 mm Intarder Air suspension Tire size 385/55 + 315/70 R 22.5 Tank capacity 710 liters Color: white Saddle height 1,150 mm Differential lock Hi-Tronix transmission Double HTH tipping hydraulics Air conditioning Auxiliary drive Disc brakes Auxiliary heater Cruise control Traction control Auxiliary air conditioning 2 bunks Climate-controlled/heated driver's seat Premium refrigerator DAB infotainment system Navigation system Electric sunroof LED lighting Hill start assist ACC adaptive cruise control AEBS emergency braking assist LDWS lane departure warning system ESP Cab with air suspension Full spoiler DPF Central locking with remote control Sun visor LED daytime running lights Fog lights Cornering lights Heated exterior mirrors Night Safety Lock Sunshade left + right Eco Roll Crawl mode Air horn Multi-leather steering wheel On-board computer Axle load display Light/rain sensor NATO connector Tire pressure monitoring Reversing warning DSE and DAS Financing available upon request!

Condition: excellent (used), CATALOGUE NUMBER 8019 Nodpfozw Dg Tsx Am Uswk TECHNICAL DATA - Max. cutting length: 3700mm - Max. cutting height: 1300mm - Max. cutting width: 700mm - Main saw motor power: 11kW - Clamping beam - Saw blade diameter: 550mm - Work table height: 860mm - Pneumatic clamping - Work table width: 135mm - Dust extraction nozzle diameter: 2x150mm - Overall dimensions (L/W/H): 5600x1500x1900mm - Weight: approximately 3000kg - For trimming boards - Pneumatic clamping - Hydraulic saw guidance - Cutting width adjustable hydraulically - Unpainted - Used saw, very good condition Net price: 39900 PLN Net price: 9500 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: refurbished (used), functionality: fully functional, Offering MORGANA AUTOCREASER PRO 33 folding machines fully refurbished by our team photos and videos available Nwodpfx Aezw Dg Hsm Uok equipment in excellent condition 2 machines currently available Price: €4,500.00 / €5,500.00 Delivery possible or preparation on a pallet, ready for shipment.

Condition: excellent (used), SIDEL / HEMA SF Classic MV2 Volumetric Filler SIDEL / HEMA SF Classic MV2 automatic volumetric filler, designed for the precise dosing and filling of food products into containers within continuous industrial production lines. The equipment uses a volumetric filling system, allowing control over the amount of product introduced into each container and maintaining uniform dosing throughout the production process. The SF Classic MV2 incorporates a product feeding hopper, automatic container transport, and a control system with a Siemens HMI, offering an automated solution for professional filling applications in the food industry. MAIN FEATURES Nwodpfx Amjzw Dgys Uek -Manufacturer: SIDEL / HEMA -Model: SF Classic MV2 -Type: Automatic volumetric filler -Volumetric dosing system -Automatic product feed -Integrated product hopper -Automatic container handling -Integrated infeed and outfeed conveyor -Automatic container positioning -Control panel with Siemens HMI -Construction primarily in stainless steel -Perimeter safety guards -Designed for continuous industrial operation -Integrable into automatic filling and packaging lines APPLICATION The SIDEL / HEMA SF Classic MV2 is designed to automatically dispense a controlled volume of product into each container. The product is fed from the top hopper to the volumetric system. The containers arrive automatically via the conveyor, are positioned in the filling area, and receive the set amount of product before continuing to the next stage of production. This system is particularly suitable for applications where dosing consistency, automated filling, and continuous operation are required. It can be integrated with: Product feeders Container conveyors Seamers and cappers Can closers Cap feeders Weight checkers Inspection equipment Labeling and coding machines Packaging equipment and end-of-line equipment Complete automatic filling lines APPLICATIONS Especially suitable for canning industries, food manufacturers, sauce producers, food preparation companies, and other processing plants that require an automatic volumetric filling system. Depending on the installed configuration, it can be used for different liquid, semi-liquid, viscous, or particulate food products, adapting to the specific product and container format. The combination of SIDEL / HEMA technology, volumetric dosing, and automatic container handling makes the SF Classic MV2 a particularly interesting solution for continuous industrial filling lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), CATALOG NUMBER: 6969 TECHNICAL DATA Nwodpfx Amjzw Dgms Uek Circular saw: - Max saw blade diameter: 300mm - Spindle: 30mm - Max cutting height: 60mm - Saw blade adjustable front/back - Motor: 2.4kW Milling machine: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 190mm - Lockable spindle - Max cutter diameter: 360mm - Motor: 7.5kW - 2 spindle speed options - Material hold-down - Adjustable side carriage (up/down, front/back) - Angle stop - Pull-out table support - Manual carriage feed - Extraction port diameters: 80mm, 160mm - Dimensions (L/W/H): 1910x1960x1800mm, Weight: 830kg – Polish production – DTR (Technical Documentation) included – Upper control panel – Used tenoning machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated according to 4.2 PLN/EUR conversion rate (In the event of substantial exchange rate fluctuations, the price may be subject to change)

Condition: used, mileage: 1,45,000 km, Year of construction: 2024, Year of manufacture: 2024 Value-added tax/differential taxation: Value-added tax deductible Nwodszw Dgaspfx Am Uek = Company information = Hello.

Condition: used, Albis TD waste collector Overall length: 5300 mm Njdpfx Ajzw Dd Ssm Uewk Width: 200 mm

Condition: good (used), functionality: fully functional, Year of construction: 2002, operating hours: 4,636 h, load capacity: 3,000 kg, lifting height: 5,900 mm, fuel type: diesel, mast type: triplex, power: 35 kW (47.59 HP), Equipment: 3rd hydraulic function, 4th hydraulic function, sideshift, trailer coupling, Linde H30D-03 diesel forklift Year of manufacture: 2002 According to the hour meter: 4,636 operating hours 3-ton lifting capacity 2.62-meter stacking height 5.90-meter lifting height 35 kW PERKINS engine!! - Triplex free-lift mast - Side shifter - 4th hydraulic circuit to the fork carriage - simple mechanical forklift! - ready for immediate use! - in good condition! Selling price: €9,500.00 net Nsdpfxjzw Dczo Am Ujwk Affordable delivery also possible!

Condition: good (used), Year of construction: 2011, Geka PUMA 110 punching machine, a high-capacity hydraulic punching machine, manufactured in 2011. Nedpfx Amozw Dcus Uswk

Condition: excellent (used), CATALOGUE NUMBER: 6582 TECHNICAL DATA - max. width of workpiece: 920 mm - max. height of workpiece: 150 mm 2 units: 1) grooved rubber roller for calibrating, 11 kW 2) grooved rubber roller for calibrating + tape blowing, 7.5 kW From above: - 2 slip rubber rollers - unit - 2 slip rubber rollers - unit - 2 slip rubber rollers From below: - 3 slip rubber rollers - conveyor belt - pneumatic tape oscillation - electric table lifting - stepless feed speed adjustment Nwsdpfxszw Dchs Am Ujk - working pressure 8-10 bar - pneumatic brake - diameter of extraction nozzle: 2 x 160 mm - overall dimensions (L/W/H): 1600 x 1460 x 2000 mm - weight: approx. 1305 kg – German made – 2 units – used grinder, very good condition Net price: 24,900 PLN Net price: 5,929 EUR Net price calculated according to the exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)