FAPCO Gabelstapler GmbH

Condition: used, functionality: fully functional, mileage: 4,83,870 km, power: 346 kW (470.43 HP), first registration: 10/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Large cab capacity with high roof GX Battery, 12 V, 230 Ah, 2 units, maintenance free Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e MAN TipMatic 14.27 DD Advanced Emergency Brake Assist (EBA) Driver comfort Air-conditioning system, Climatronic Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment Comfort co-driver’s seat, air-sprung Bunk, top, with slatted support Bunk, bottom, with slatted support Auxiliary water heater 4 kW (night heater) Fridge and drawer, 1 unit, centre area, to rear Ibsdszu S S Eepfx Aqwsa Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Tyres for front axle, Goodyear 315/70R22.5 KMAX S G2 Steering-Short haul TL Tyres for rear axle, Goodyear 315/70R22.5 KMAX D G2 Drive-Short haul TL Spare wheel, in accordance with configuration for front axle tyres Main wheelbase, 3,900 mm Axle ratio, i = 2.31 Fuel tank capacity 580 l, left Fuel tank capacity 580 l, right AdBlue tank capacity 80 l, left Road speed limiter, adjustable, limiter (engine speed regulation) Technology MMT infotainment system, Advanced Basic MAN TeleMatics Exterior Front headlights, LED Daytime driving lights, LED Fog lights, LED Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range Side flaps, left folding and right fixed Tyres Information Front left - 10 mm Front right - 11 mm Rear left inner - 10 mm Rear left outer - 10 mm Rear right inner - 9 mm Rear right outer - 9 mm

Condition: excellent (used), mileage: 2,13,774 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x4, wheelbase: 3,090 mm, first registration: 05/2021, fuel tank capacity: 80 l, emission class: euro6, color: black, suspension: steel, tire size: 265/65R17, number of seats: 2, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, power assisted steering, soot filter, traction control, trailer coupling, General information Number of doors: 2 Cab: one and a half Registration number: VKJ-32-T Technical information Iodjzu S Sfopfx Aqwjba Number of cylinders: 4 Engine capacity: 2.393 cc Drivetrain AdBlue system: Yes Transmission Transmission: 6 gears, Manual gearbox Axle configuration Tyre size: 265/65R17 Brakes: disc brakes Front axle: Max. axle load: 1450 kg; Steering; Tyre profile left: 80%; Tyre profile right: 80% Rear axle: Max. axle load: 1920 kg; Tyre profile left: 90%; Tyre profile right: 90% Measures Dimensions (LxBxH): 533 x 186 x 181 cm Weights Empty weight: 2.040 kg Carrying capacity: 1.110 kg GVW: 3.150 kg Maintenance APK (MOT): tested until 01/2027 Condition Technical condition: very good Visual appearance: very good Damages: none Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - All wheel drive - Bluetooth - Bumpers in color - DAB Radio - Differential Lock - Door mirrors in colour of body - Electrically operated windows - Electric folding mirrors - Leaf spring suspension - Multifunctional Steering Wheel - Particulate filter - Radio/Cd/Audio system - Reversing camera - Side skirts - Slip differential - Spare wheel - USB Connection = Remarks = VIDEO: Very beautiful and neat Toyota Hi-Lux 2.4 D4d 150 HP Euro 6 CI 4WD / 4x4 / Four-wheel drive Extra cab / One-and-a-half cab Tow bar 3350 kg 213,000 km NAP Fully dealer maintained Technically and visually in very good condition

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 630 mm, controller manufacturer: FANUC, controller model: 0l-MC, overall weight: 5,800 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 10,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis HARTFORD PRO-800A was manufactured in 2005. It features an X-axis travel of 800 mm, Y-axis travel of 510 mm, and Z-axis travel of 630 mm. The machine is equipped with a spindle speed of 8,000 rpm and a tool changer with 24 positions. If you are looking to get high-quality machining capabilities, consider the HARTFORD PRO-800A vertical machining centre we have for sale. Contact us for further details. • Rapid traverse (X/Y): 30 m/min • Rapid traverse (Z): 24 m/min • Working feed: 1–10,000 mm/min • Table size: 900 x 470 mm • Spindle power: 7.5 kW / 10 kW • Spindle-to-table distance: 75–705 mm • Tool changer: 24 positions • Condition: Under power, fully functional Additional equipment • Internal cabin flushing (chip flush) • Chip conveyor belt Technical Specification Taper Size BT 40 Ijdpfx Aqozu S Rhewoba

Condition: used, empty load weight: 3,580 kg, maximum load weight: 8,320 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 01/2022, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,630 mm, loading space volume: 46 m³, suspension: air, tire size: 245/70R17,5 143J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70R17,5 143J, rear tire size: 245/70R17,5 143J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, Tail lift Dautel DL 1500 L, load capacity 1,500 kg, 4-cylinder aluminum platform 1,800 mm long, 2 roll-off safety devices, with batteries and charging cable, front with portal doors for continuous loading with a short ramp plate, 14 tie-down points. Ibsdpfxezu S N Re Aqwoa -- Subject to printing errors, errors and changes. Sample images --. More details at: !

Condition: excellent (used), Year of construction: 2019, Geared motor, electric motor, electric geared motor, worm geared motor, flat geared motor Iedpfx Aezu S Hpeqwjba -Condition: Geared motor is unused -Manufacturer: NORD DRIVESYSTEMS, Flat gearbox series F -Type: SK7382AZH-180MP/4 TF -Speed: 22 rpm -Power: 18.5 kW -Protection rating: IP55 -Hollow shaft: Ø 70 mm -Dimensions: 930/450/H660 mm -Weight: 410 kg

Condition: excellent (used), mileage: 2,23,496 km, power: 355 kW (482.67 HP), first registration: 04/2022, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: intarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 6,320 mm, total width: 2,540 mm, total height: 4,000 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2022, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, second fuel tank, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Android Auto - Apple CarPlay - Front work lights - Leaf spring suspension - Roof spoiler - Windshield - Tilting hydraulics - Air suspension - Sleeper cab - Side door - Sun visor - Auxiliary heater = Notes = DAF XF 480 4x2 semi-trailer tractor unit from the year 2022 with 223,496 km, equipped with a hydraulic system for a tipper trailer. Equipment: Year of manufacture: 2022 Mileage: 223,496 km 4x2 480 hp Tilting hydraulics Intarder Pressurized cabin Air conditioning Auxiliary heater 2 beds Refrigerator Fully equipped and practical semi-trailer tractor unit, suitable, among other things, for use with a tipper trailer. For further information or to arrange a viewing appointment, please do not hesitate to contact us. = Further Information = General Information Number of doors: 2 Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Front axle: Max. axle load: 8000 kg; Tire tread depth left: 80%; Tire tread depth right: 80% Ibodpszu S Hiefx Aqwja Rear axle: Max. axle load: 11500 kg; Tire tread depth left: 70%; Tire tread depth right: 70% Weights Unladen weight: 8,064 kg Payload: 12,436 kg GVW: 20,500 kg Interior Number of seats: 2 Maintenance, History and Condition APK (Technical Inspection): valid until 02/2027 Technical condition: very good Optical condition: very good Further Information Please contact Gerrit Haverhoek for further information.

Condition: excellent (used), Year of construction: 2012, URBAN welding and cleaning line consisting of two 4-head URBAN AKS 6410 welding machines, including an automatic conveyor belt running perpendicular to the welding machines, with a URBAN SV 800/2 automatic corner cleaning machine with two heads and an infeed/outfeed table. Isdpfx Aqjzu S Exswoba Operated in single-shift production, in very good condition, programmed for VEKA profiles. Includes welding supports, safety fences, and tools for the automatic corner cleaning machine. WINDOWS-based control system, network compatible. Product capacity: at least 200 frames/sashes in 8 hours.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, mileage: 1,04,646 km, power: 75 kW (101.97 HP), first registration: 12/2011, overall weight: 3,500 kg, next inspection (TÜV): 06/2027, gearing type: mechanical, Equipment: trailer coupling, Hako M30 / Multicar / Salt Spreader / 3-way Tipper / June 27 • Manufacturer: Hako • Type: M30 • Mileage: 104646 km • First registration: 12.12.2011 • Power: 75 kW / 101 hp • Transmission: Manual transmission • Wheel formula: 4x4 • Front and rear hydraulics • Mounting plate • 3-way tipper • Salt spreader • Trailer coupling • Tires: 225/75R16 C 121/120N Iodpfx Aszu S Ereqwsba • Euro emission standard: EEV • Unladen weight: 2830 kg • Payload: 170 kg • Permissible total weight: 3500 kg • German vehicle • German documents • Immediately ready for use • • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typographical errors not excluded. - Sale subject to our general terms and conditions.

Condition: used, mileage: 1,11,000 km, power: 206 kW (280.08 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 7,300 mm, loading space width: 2,500 mm, loading space height: 2,430 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, spoiler, tail-lift, trailer coupling, Year of manufacture: 2023 Front axle: Steering; Tyre profile left: 60%; Tyre profile right: 60%; Suspension: leaf suspension Rear axle: Double wheels; Tyre profile left inner: 60%; Tyre profile left outer: 60%; Tyre profile right outer: 60%; Tyre profile right outer: 60%; Suspension: air suspension Empty weight: 7.310 kg Carrying capacity: 8.690 kg GVW: 16.000 kg Tail lift: Palfinger, 1500 kg = Additional options and accessories = Ibedpfx Aqjzu S D Ujwea - Coupling - Lock diff - Radio - Roof spoiler - Visor = Remarks = Comfort cabine 2x sprung chairs

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2020, total length: 11,350 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22.5, wheelbase: 9,340 mm, color: other, Year of construction: 2020, Axle configuration Tyre size: 385/55 R22.5 Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Ibedpfx Aozu S Dzoqwsa Empty weight: 5.800 kg Carrying capacity: 35.200 kg GVW: 41.000 kg Maintenance APK (MOT): tested until 12/2026 Identification Registration number: OS-76-FN

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,000 h, travel distance X-axis: 300 mm, number of axes: 3, Metal 3D printer manufactured in 2017. This TRUMPF TruPrint 3000 features a build volume of Ø 300 mm x 400 mm and is equipped with a 500 W fiber laser. It offers high-speed and high-density build rates, making it suitable for various applications. If you are looking to get high-quality metal printing capabilities, consider the TRUMPF TruPrint 3000 machine we have for sale. Contact us for further details regarding this machine. • Build volume: Ø 300 mm x 400 mm • Laser configuration: 1x 500 W fiber laser • Laser capacity: 500 W • Main supply: 360 – 440 V • Frequency: 50/60 Hz • Control voltage: 24 VDC • Connected load: 15 kVA • Full load current: 32 A • Nitrogen supply (N2): 6 – 10 bar • Argon supply (Ar): 6 – 10 bar • Air pressure: 5 – 10 bar • Laser operating hours: approx. 9,000 h • Last maintenance: 02/2024 • Condition: very good • Build material: AlSi10Mg only • Validated parameter sets: High Speed / High Density • High Speed build rate: 57 cm³/h at 60 µm layer thickness and 99.6% density • High Density build rate: 27 cm³/h at 60 µm layer thickness and 99.9% density • Optional accessories: • 1x build cylinder • 2x powder supply cylinders • Cooler • Pallet truck • Unpacking station • 2x new filters • 11x aluminum build platforms • Vacuum conveyor system • Sieving machine with control unit • Optional accessories year: 2017 Iedozu S Dbopfx Aqwoba • Optional accessories condition: very good Availability: approx. Q3/2026

Condition: ready for operation (used), Year of construction: 2021, Circular Wood Saw manufactured in 2021. This CAN CUT MC 930 features a cutting width of 1,100 mm and a maximum cutting height of 50 mm. It operates with a feed speed of 5-20 m/min and can accommodate up to 15 saw blades with a maximum diameter of 250 mm. If you are looking to get high-quality cutting capabilities, consider the CAN CUT MC 930 machine we have for sale. Contact us for further details. Ibsdpozu S A Rofx Aqwoa • Cutting width: 1,100 mm • Maximum cutting height: 50 mm • Minimum panel length: 650 mm • Feed speed: 5–20 m/min • Feed motor: 0.75 kW, 1,410 rpm • Maximum power consumption: 22 kW, 380 V • Power: 30 HP • Maximum saw blade diameter: 250 mm • Saw shaft diameter: 70 mm • Saw blade speed: 3,500 rpm • Maximum number of saw blades: 15 • Working height: 900 mm • Noise level: 80 dB Additional equipment • Automatic transport rollers: 3 pcs. • Rubber rollers between the saw blades to reduce vibration of MDF panels and wood during cutting Technical Specification Cutting Range 1100 mm Feed Speed 20 m/min

Condition: ready for operation (used), Year of construction: 2021, spindle motor power: 22,000 W, spindle speed (max.): 4,200 rpm, travel distance X-axis: 325 mm, travel distance Z-axis: 840 mm, total height: 2,300 mm, total width: 2,140 mm, overall weight: 6,200 kg, controller manufacturer: FANUC, controller model: 32i-B, product length (max.): 3,000 mm, number of axes: 6, This 6-axis Takisawa TS-4000YS was manufactured in 2021. It features a maximum swing diameter of Ø 600 mm and a turning diameter of Ø 370 mm with a length of 750 mm. The machine includes a powerful 22 kW main motor and a counter spindle with a speed of 6000 rpm. If you are looking to get high-quality turning capabilities, consider the Takisawa TS-4000YS turn-mill centre we have for sale. Contact us for further details. • Capacity: • Max. swing diameter: Ø 600 mm • Max. turning diameter x length: Ø 370 x 750 mm • Bar capacity: Ø 82 mm • Main spindle: • Spindle centerline height from floor: 1140 mm • Bearing/bore diameter: Ø 140 / Ø 90 mm • Spindle nose: A2-8 • C-axis resolution: 0,001° • Counter spindle: • Spindle centerline height from floor: 1140 mm • Bearing/bore diameter: Ø 90 / Ø 53 mm • Spindle nose: F-140 • Speed: 6000 rpm (1/min) • C-axis resolution: 0,001° • Strokes: • Y: -50 ~ +70 mm • A: 780 mm • Rapid traverses: • X: 30 m/min • Z: 30 m/min • Y: 10 m/min • A: 30 m/min • Power: • Main spindle motor (30 min. / 100% ED): AC 22 / 15 kW • Max. torque (main spindle): 618 Nm (S3 25%) • Counter spindle motor (30 min. / 100% ED): AC 11 / 7,5 kW • Max. torque (counter spindle): 175 Nm (S3 25%) • Driven tools: • Turret stations: 12 pcs • Max. speed: 6000 rpm (1/min) • Drive power (S3 25% / 100% ED): 7,5 / 3,7 kW • Max. torque: 48 Nm • Tooling: Ibedpfx Aezu S Akeqwja • Tool shank cross-section: 25 x 25 mm • Boring bar diameter: Ø 50 mm • Control: CNC path control FANUC 32i-B Technical Specification Counter Spindle Yes Driven Tools Yes

Year of construction: 1985, condition: used, Drilling process: single-lip gundrilling, operating method: rotating tool, number of working spindles: 1, nominal drilling depth: approx. 750mm, drilling range for solid drilling in steel: approx. 30mm, drilling range for counterboring in steel: approx. 40mm, spindle drive: 11kW, max. spindle speed range I: 1800rpm, max. spindle speed range II: 5700rpm, max. feed rate range I: 320mm/min, max. feed rate range II: 160mm/min, rapid traverse: 3.5m/min, clamping table X/Y: 420mm/1280mm, cross-slide table manually operated, max. transverse travel: 400mm, table clamping surface X/Y: 600mm/600mm, high-pressure coolant system for deep-hole drilling oil with 1000l coolant tank, flow rate: approx. 2-94l/min, max. pressure at max. flow rate: 45bar, pump power: 11kW, separate control cabinet. The machine underwent an extensive partial overhaul in 2018, during which the machine was disassembled and cleaned, all guideways and support surfaces were ground and partially scraped, motors were inspected and fitted with new bearings, the drilling spindle was fitted with new bearings, the ball screw incl. nut was replaced, the pump motor was overhauled, the wiper set was replaced, and the machine was repainted and all functions were checked and rectified. Including extensive accessories. Documentation available. Inspection possible by arrangement. Ibjdpezu Szyjfx Aqwsa

Condition: used, Year of construction: 2007, Travel X/Y/Z: 600mm/400mm/460mm, spindle-to-table distance: 200mm-660mm, table size X/Y: 700mm/410mm, max. table load: 250kg, rapid traverse X/Y: 72m/min, rapid traverse Z: 60m/min, max. spindle speed: 12000rpm, spindle power: 7.5kW, tool taper: BT40, tool magazine: 24+1, max. tool diameter: 80mm, max. tool length: 250mm, tool change time: 1.6s, control: Mitsubishi M64S, through-spindle coolant: 20bar, probing system: Renishaw, machine weight: approx. 4300kg. Including a tool cabinet with approx. 100 tool holders. Inspection possible by arrangement. Iodpfozu Sz Hjx Aqwsba

Condition: used, Year of construction: 1994, Filter area: approx. 8m², number of filter leaves: 9, vessel capacity: 720l, allowable operating overpressure: 6bar, allowable operating temperature: 80°C, vessel diameter: approx. 760mm, inlet: DN50, outlet: DN50, vent: DN25, solids discharge: DN350. Pumps and piping are available. Filter empty weight: approx. 750kg, space requirement X/Y/Z: approx. 2000mm/1790mm/2800mm. Inspection possible by arrangement. Ibodpfx Aszu S Adeqwea

Year of construction: 2004, condition: used, An INDEX CNC lathe with counter spindle and IEMCA bar feeder is offered. Main spindle bore: 65mm, max. spindle speed: 7000rpm, axes: 4, live tooling: possible, tool system: VDI25, spindle operating hours: approx. 80000h, control: Siemens 840D. 2) Bar feeder: IEMCA Master 880/MP 33 L, Year of manufacture: 2004, max. bar length: 3300mm, round bars: 8mm-80mm, hexagonal bars: 7mm-65mm, square bars: 10mm-50mm, max. bar weight: 120kg, min. remnant length: 110mm, bar feeder weight: approx. 1350kg. Including chip conveyor. Machine was continuously maintained. The machine is available from October. Documentation available. Inspection possible by arrangement. Iedpfxozu Sz To Aqwjba

Year of construction: 2021, condition: used, Load capacity: 2000kg, support surface per table X/Y: 1400mm/900mm, tilting angle: 100°, travel of the movable table: approx. 300mm, drive: hydraulic, control: PLC, operating modes: manual/automatic, collision avoidance in manual operation via table position and table inclination. Equipment: heavy-duty rollers, therefore movable. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1300mm, weight: 1310kg. Documentation available. Inspection possible by arrangement. Ijdpfx Aqezu Sztewjba

Condition: used, Year of construction: 2010, A KERN 5-axis CNC machining center with EROWA Robot Compact is offered. Travel X/Y/Z: 500mm/500mm/400mm, simultaneous 5-axis machining, hydrostatic guideways in the X and Y axes, swivel range: -10° to +110°, feed rate X/Y/Z: 30m/min, max. acceleration: 10m/s², max. spindle speed: 40000rpm, spindle power: 37kW, max. torque: 12000rpm, tool taper: HSK-E40, tool magazine: 50, tool change time: approx. 3s, control: Heidenhain iTNC 530 , laser tool measurement, workpiece touch probe, EROWA PowerChuck P, EROWA Robot Compact year of manufacture 2013 with 70 magazine positions, including 55 positions ITS 72 and 15 positions ITS 148, max. transfer weight pallet incl. workpiece: 30kg, automatic loading and unloading of the magazine also possible during machining, machining medium: oil, belt filter system and max. high-pressure supply 80bar, oil mist extraction system and fire extinguishing system available, machine power-on hours: approx. 86589h, spindle operating hours: approx. 66997h. The machine is available from November 2026. Documentation available. Inspection possible by arrangement. Isdpfxozu Szmo Aqwoba

Condition: used, mileage: 5,14,326 km, power: 290 kW (394.29 HP), first registration: 01/2008, fuel type: diesel, overall weight: 18,000 kg, next inspection (TÜV): 07/2027, color: silver, gearing type: automatic, emission class: euro3, suspension: other, number of seats: 4, Equipment: air conditioning, bathroom, trailer coupling, Overcab bed, roof hatch, green environmental badge (4), reversing camera, TV, electric windows, radio, center armrest, diesel automatic, 4 registered seats (individual seats), air conditioning, radio, electric windows, trailer hitch, Euro 3, green environmental badge, center armrests, reversing camera, living area, overcab bed, 4 sleeping places, seating area, TV, storage cabinets, hob, sink, microwave, refrigerator, separate bathroom, shower, washbasin, toilet, 5 horse capacity, rear and side ramp, ramp limiter, windows in the horse compartment, roof hatches, surveillance camera in the horse compartment, external saddle room, bridle holder, external storage space, motorhome registration, permissible total weight 18,000 kg, model 2002. FOR US, THE CONDITION AND OUR GUT FEELING ARE DECISIVE, THE PRICE IS SECONDARY. If you have any further questions, please do not hesitate to contact Mr. Faller on the following number: //*EXCHANGE, TRADE-IN OR FINANCING OF YOUR VEHICLE IS POSSIBLE! All information without guarantee.* You can find more offers on our website: The description and stated data do not constitute a guarantee and are not binding. The purchase contract concluded at the car dealership when purchasing the vehicle is binding. Errors and prior sale are reserved! Ijdpfx Aezu Szgeqwsba

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 6,230 h, load capacity: 4,000 kg, lifting height: 6,500 mm, free lift: 2,100 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 3,250 mm, motor manufacturer: PERKINS, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 250-15, overall weight: 11,400 kg, empty load weight: 7,400 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, HUBTEX DQ40D – 2012 | 6,230 OPERATING HOURS | DIESEL | TRIPLEX 6,500 mm | FORK POSITIONER | FREE-LIFT 🚜 Ready to work from day one – no investment, no risk 🚀 --- Why choose this forklift? 🤔 Are you looking for a machine that won't interrupt your workflow? ⏱️ This HUBTEX DQ40D is a proven unit after comprehensive servicing – ready for immediate operation. No hidden fees. 💼 ✔ major service completed (oil, filters, complete inspection of all components) 🔧 ✔ technical and aesthetic condition: like new ✨ ✔ only 6,230 operating hours – very low mileage 📊 ✔ new tyres – no further investment needed 🛞 --- Key specifications ⚙️ * Capacity: 4,000 kg ⚖️ * Power: DIESEL ⛽ * Mast: Triplex – 6,500 mm 📏 * Fork positioner: 1,250 mm ↔️ * Forks: 1,200 mm * Cabin: full, heated 🔥 --- Full technical specification 📋 General data: * Year of manufacture: 2012 📅 * Operating hours: 6,230 * Capacity: 4,000 kg * Load center: 600 mm * Weight: 7,400 kg Mast & lifting: * Mast type: Triplex * Lifting height: 6,500 mm Forks & attachments: * Fork positioner: 1,250 mm * Forks: 1,200 mm Dimensions: * Height: 2,600 mm * Length: 2,500 mm * Width: 2,250 mm * Closed height: 3,250 mm Chassis: * Tyres: superelastic (100%) – new 🛞 * Front: 200x50-10 * Rear: 250-15 Equipment: * Full heated cabin 🔥 * Wide fork positioner ↔️ * Lighting 💡 Ibodezu Sy Njpfx Aqwsa * Free lift Condition: * Technical: 5/5 – post full service ✅ * Aesthetic: refurbished, like new, no corrosion ✨ --- Ideal for 🏭 ✔ narrow aisle warehouses 📦 ✔ timber, steel, and pipe industries 🪵 ✔ long load handling 📏 ✔ indoor and outdoor applications 🌦️ --- What you get 💼 You’re not buying a “used forklift.” You’re buying a fully prepared, ready-to-work machine: ✔ every machine is fully tested before sale 🔍 ✔ ready for immediate deployment 🚀 ✔ live online demonstrations available 💻 ✔ transport to your facility provided 🚛 --- Delivery and support 🌍 * transport across Europe * comprehensive logistics support * assistance with leasing/financing 💰 * after-sales support 🤝 --- Why FT LOGISTICS? 💪 We deliver forklifts that perform – not machines that stay in the workshop. ✔ over 100 units available 📊 ✔ in-house servicing and preparation 🔧 ✔ pan-European experience 🌍 ✔ hundreds of satisfied clients ⭐

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,672 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 4,000 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 355X65-15, overall weight: 9,800 kg, empty load weight: 6,800 kg, total height: 2,550 mm, total length: 2,100 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, pallet forks, sideshift, 🔶 COMBILIFT C3000XL – 2011 – 5672 HOURS – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. This COMBILIFT C3000XL is not just a machine — it is a guarantee that your logistics will proceed smoothly, reliably, and without interruption. Designed for demanding applications and fully reconditioned both technically and visually, the forklift presents as new and is ready for immediate use. 📌 Key Technical Data: 📅 Year of manufacture: 2011 ⏱️ Operating hours: 5672 🔥 Drive: LPG 💪 Load capacity: 3000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1340 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Super elastic (100%) 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2550 mm | Length 2100 mm | Width 2300 mm 📦 Overall height: 2900 mm 🛞 Tyres: SE – Front 23x10-12 | Rear 355x65-15 🏗️ Free lift: 2000 mm 📦 Perfect for: Ijdpfxozu Syvs Aqweba 📚 Narrow aisle warehouses 🪵 Steel, timber and pipe industries 📏 Handling long loads 🏭 Indoor and outdoor operations FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: excellent (used), Catalog number: 8080 TECHNICAL DATA - log diameter: 60-360mm - min. log length: 1500mm - rotor diameter: 385mm - number of knives: 4 - drive system: PTO shaft - dimensions (L/W/H): 2200x2900x1700mm - weight: approximately 3000kg ADVANTAGES - PTO shaft driven - for debarking logs - country of origin: Finland - used debarker, very good condition Net price: 38900 PLN Net price: 9262 EUR, depending on the exchange rate of 4.20 EUR Ijdpszu Sypsfx Aqwsba (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,963 h, load capacity: 5,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,950 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 355X45-15, overall weight: 12,500 kg, empty load weight: 7,500 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,300 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🛠️ Years of Experience | 🧰 In-house Service & Paint Shop | 🤝 Expert Consultation | 🚛 Own Transport Fleet | 🔧 Comprehensive After-sales Support Looking for a forklift you can truly rely on? We are a reputable dealer of new and used forklifts, serving the industry for many years. Our customer base spans all of Europe—from small businesses to major industrial facilities. Our forklifts are more than just equipment—they are your assurance of seamless and dependable logistics. -- What sets us apart? -- ✅ Every forklift undergoes a thorough technical inspection and servicing (including checks, tests, oil & filter changes, and component refurbishment) ✅ Full UDT (Office of Technical Inspection) certification available on request ✅ In-house paint and service workshop—machines are optimized both technically and aesthetically ✅ Pan-European delivery—provided by our skilled drivers ✅ Operator training and on-site machine demonstration at handover ✅ Ongoing after-sales technical support—we stay connected post-purchase ✅ On-site viewing and test drives welcomed at our facility ✅ Hundreds of satisfied customers throughout Europe—become one of them today Ibjdszu Syiopfx Aqwja ✅ Financing options available—we collaborate with leading leasing providers ✅ Invoicing in EUR or PLN—as per your preference -- FOR SALE -- COMBILIFT C5000 – Four-Way Forklift Truck 📅 Year of manufacture: 2015 ⏱️ Operating hours: 4,963 h 🔋 Propulsion: GAS / LPG 📦 Load capacity: 5,000 kg 📏 Mast: Duplex – 4,000 mm lift height 🔩 Fork positioner – width: 1,350 mm | Forks: 1,200 mm 🛞 Superelastic tires – 100% condition 🧪 Technical condition: Excellent – fully serviced 🎨 Visual condition: Clean, corrosion-free, and ready for work 📐 Dimensions: - Lowered mast height: 2,600 mm - Total length: 2,500 mm - Overall width: 2,300 mm - Fork positioner width: 1,350 mm - Overall height: 2,950 mm -- Ideal for: -- 🏭 Narrow-aisle warehouse applications 🌲 Timber, steel, and pipe handling industries 📏 Handling long and bulky loads 🏗️ Both indoor and outdoor operations -- FT Logistics – Quality you can depend on. Service you can trust. --

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,671 h, load capacity: 5,000 kg, lifting height: 6,000 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 28X12,5-15, overall weight: 12,200 kg, empty load weight: 7,200 kg, total height: 2,550 mm, total length: 2,500 mm, total width: 2,250 mm, color: green, motor model: 3.0., Equipment: CE marking, adjustable boom, all wheel drive, cabin, fork extension, lighting, pallet forks, retractable fork, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🛠️ Years of experience | 🎨 In-house service & paint shop | 📊 Professional consulting | 🚚 Own transport fleet | 🤝 After-sales support Looking for a forklift you can count on? We are a trusted supplier of new and used forklifts, backed by years of industry experience. We serve clients across Europe, from small enterprises to international industrial corporations. Our forklifts are more than just machines – they provide the reliability and efficiency your logistics demand. -- What makes us different? ✅ Every forklift undergoes a comprehensive technical overhaul (inspection, functional testing, filter and oil replacement, refurbishment of major components) ✅ UDT full inspection optionally available upon request ✅ 🎨 In-house paint and service shop – meticulously prepared mechanically and visually ✅ 🚚 Europe-wide delivery – carried out by our own fleet and trained drivers ✅ 👨‍🏫 Operator training and functional handover at your location ✅ 🛡️ After-sales service and technical support – we remain available even after your purchase ✅ 🏭 View and test the machine at our facility – you are welcome to visit! ✅ 🌍 Hundreds of satisfied customers across Europe – join the growing community that trusts our services ✅ 💶 Financing support – we collaborate with leading leasing companies ✅ 📑 Invoice issued in EUR or PLN – as you prefer -- AVAILABLE: 🚜 COMBILIFT C5000XL – Four-way Sideloader Forklift 📅 Year: 2018 Ibsdpfx Aszu Sycoqwja ⏱️ Operating hours: 3,671 h ⛽ Power: LPG 📦 Load capacity: 5,000 kg 📏 Mast: Triplex – 6,000 mm 🔧 Fork positioner 1,350 mm | Extendable forks 1,200 / 2,000 mm 🛞 Superelastic tyres – 100% condition 🟢 Technical condition: Excellent – after complete service ✨ Visual condition: Very good, rust-free, work-ready 📐 Free lift: 2,000 mm Dimensions: 📐 Truck height: 2,550 mm 📐 Overall length: 2,500 mm 📐 Width: 2,250 mm 📐 Positioner width: 1,350 mm 📐 Overall construction height: 2,900 mm -- Ideally suited for: 📦 Warehousing with narrow aisles 🌲 Timber, steel, and pipeline industries 📏 Handling long or oversized loads 🏭 Indoor and outdoor operations