Santen + Marzeion GmbH & Co.KG

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: 90F, functionality: fully functional, Double miter saw with circular blades of 250–275 mm diameter and cuts at 45°+45° with fixed fence. The operator performs the 45° horizontal cut by pulling one blade at a time. Wide cutting capacity (120 mm width x 80 mm height). Precise and high-quality cuts in soft and hard woods – PS and all MDF materials. Low noise and high safety standards. Particularly suitable for all picture framers with small production runs. Hedpfxjy Iag Ts Akrol

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, power: 2 kW (2.72 HP), saw blade diameter: 350 mm, Radial arm saw Graule Hsdpfjy Dgdkjx Akrjl This machine can cut 90° only !!! Length of cut : 430 mm Depth of cut : 135 mm Sawblade-Ø : 350 mm Suction plant-Ø : 100 mm

Condition: excellent (used), functionality: fully functional, Double mitre saw ALFAMACCHINE T350 Double saw for 45-degree angle cuts Blade diameter: 350 mm Blade bore diameter: 30 mm Blade speed: 3,000 rpm Motors: 2×1.5 kW Air requirement: 5–7 bar Cutting width: 15–80 mm Cutting height: 10–80 mm Hjdpfx Aoyzrgxjkrol

Condition: excellent (used), Sprossen Punching Machine 12 mm used, in excellent condition Brand: Jeyden Sprossen blade 12 mm Right-hand support table with adjustable stop Space requirement approx. 1100 mm x 600 mm x 1100 mm Weight approx. 65 kg Storage location: 54634 Bitburg, loaded free onto transport, unpacked Sold as seen in current condition, without warranty or guarantee Hodpfx Aksyza Ansrol

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, For sale: KOCH net saw—optimized for fast and precise trimming of furniture components, especially drawer sides. The machine ensures a clean, net cut (with no tears or edge defects)—a solution significantly faster than cutting on panel saws. Key features and specifications: Hodpfx Aoyyyfyjkrel - PLC control—automatic operation (separately retrofitted) - Buffer magazine for workpieces - Pusher beam on hydraulic system—feeds part to next operation - Maximum machine span: 2 m - Maximum feed speed: 12 m/min - Drive can be activated from both sides of the machine - Top scoring saw blades for cutting components from above - Spindle speed approx. 4,500–5,000 rpm (motors: 2,100 rpm) - Complete safety covers and safety sensors - Ready production of 'drawer ribbon' (final-sized drawer banding) The top saws are used for producing complete drawer bands (ready-to-install components). Example: a 640 mm long piece is surfaced/truncated from above and divided into 3 parts, so by adding the drawer front and bottom, you have a finished drawer without any additional side processing. Performance: For a sample drawer side (350 x 100 mm): approx. 25,000–30,000 pieces per shift (highly efficient production). Location: Elbląg Loading is the responsibility of the buyer/assistance available on site. Please feel free to get in touch—I’ll be happy to answer any questions.

Condition: reconditioned (used), functionality: fully functional, Power connection: 230V, 1.5kW Current consumption in operation: 5.5A Cutting height approx. 80 mm Cutting length 150 mm Dimensions (W x H x D): 500 x 570 x 750 mm Hsdpfx Akjyypfperel Weight approx. 50 kg Handwheel height adjustment Swivels right/left 45° Tiltable 45°

Condition: good (used), functionality: fully functional, Double mitre saw ALFAMACCHINE T350 Double saw for 45-degree angle cuts Blade diameter: 350 mm Blade bore diameter: 30 mm Blade speed: 3,000 rpm Motors: 2×1.5 kW Hjdpfx Akeyyna Ejrol Air requirement: 5–7 bar Cutting width: 15–80 mm Cutting height: 10–80 mm

Condition: excellent (used), functionality: fully functional, Double mitre saw ALFAMACCHINE T350 Double saw for 45-degree angle cuts Blade diameter: 350 mm Blade bore diameter: 30 mm Hsdpfjyybyfsx Akrel Blade speed: 3,000 rpm Motors: 2×1.5 kW Air requirement: 5–7 bar Cutting width: 15–80 mm Cutting height: 10–80 mm

Condition: good (used), Year of construction: 1993, 1 x Graule Crosscut and Mitre Circular Saw Type ZS 170 Technical data: Hodjyxxzwjpfx Akrol - Motor: 400 V / 3.0 kW - Speed: 3500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90° / 290 mm at 45° - Cutting height: 170 mm at 90° / 115 mm at 45° - Mitre range horizontal: 45°-90°-25° - Saw blade diameter: 420 mm - Extraction port diameter: 100 mm - Weight: 120 kg Location: ex-stock 54634 Bitburg - immediately available -

Condition: new, Equipment: CE marking, saw blade guard, Mitre saw with a saw blade diameter from 400mm to 800mm - Manual mitre adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and tilt angle of the clamping cylinders are infinitely adjustable) - Two-hand safety control Version as an automatic saw available on request. Optional available: - Automatic mitre adjustment - Hydraulic saw feed - Hydraulic clamping device - Roller conveyor with length stop or positioning system - Version as automatic saw - Preloading magazine - Horizontal clamping device - Extraction system - Additional accessories on request We are happy to prepare a quotation tailored to your requirements. Hjdpfxeyxlqre Akrel The machine can be inspected and tested in 56812.

Condition: good (used), Year of construction: 1988, Double Mitre Saw Düspohl DGK 400 B Stock number: 001071 Double Mitre Saw Düspohl Type: DGV 400 B Year of manufacture: 1988 Swivelling saw blades Max. cutting length: 2500 mm Approx. cutting height: 70 mm Max. saw blade diameter: approx. 300 mm Was used for door frames Motor power: 4 kW Location: ex stock 54634 Bitburg Hsdpfxoyv R Nzs Akrsl - immediately available -

Condition: used, Year of construction: 1980, Graule ZS 85 N Cross-cut and mitre circular saw, tiltable ~ Year of manufacture: 1980 400 Volt three-phase, 2 kW Saw blade diameter: 350 mm, bore: 30 mm Hjdpfx Ajyv Aa Sjkrel Cutting height: 85 mm Cutting length: 380 mm at 90° Cutting length: 270 mm at 45° Extraction port D = 100 mm

Condition: good (used), Year of construction: 1995, Automatic notching machine for cross joints (see attached prospect for technical data). Second-hand machine in good condition, tested in our workshop before delivery. Hedpfsyr A Umjx Akrsl

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, type of input current: three-phase, saw blade diameter: 520 mm, saw blade bore: 50 mm, total length: 1,750 mm, total width: 1,030 mm, total height: 1,800 mm, overall weight: 400 kg, Equipment: documentation/manual, GRAULE ZS 200 N Crosscut & Mitre Saw – Ø 520 mm – Year 2015 – Digital Displays – 400 V For sale is a very well-maintained and solid industrial crosscut and mitre saw from the quality manufacturer GRAULE. This machine is specifically designed for commercial users in timber construction, metalworking, aluminium/non-ferrous profile machining, workshop, and maintenance sectors who require reproducible, precise mitre cuts. ⸻ Manufacturer / Model Manufacturer: GRAULE Model: ZS 200 N Year of manufacture: 2015 Operating voltage: 400 V / 50 Hz ⸻ Technical Data Saw blade diameter: 520 mm Saw blade bore: 50 mm Hjdpfx Ajym Egnskrsl Motor: HIMMEL 3.0 kW Rated current: 6.4 A Weight: approx. 400 kg ⸻ Digital Angle Displays (ELGO / GRAULE Z-60) A major advantage of this machine is the integrated digital angle displays: – Horizontal mitre (turntable) display – Vertical mitre (tilt) display – Incremental/absolute mode switch – Zeroing/referencing possible – Parameter setting directly on the device Result: Faster setup, reduced scrap, high repeat accuracy for serial cutting. ⸻ Equipment – Heavy-duty industrial construction, smooth running – Wide mitre range via turntable – Pneumatic functions available – Coolant/minimal quantity lubrication system included – Digital display mounted on the column – Robust clamping and stop area – Extraction port present ⸻ Condition Very well-maintained overall impression. No makeshift repairs, fully assembled. Age- and use-related signs of wear present. Technically well-maintained. Inspection and test run by appointment are expressly possible and recommended. ⸻ External Dimensions (approx.) Width: 160 cm Depth: 120 cm Height: 190 cm ⸻ Price €6,750 net plus 19% VAT. ⸻ Terms – Sale on behalf of customer – Invoice with VAT shown – Location: 72229 Rohrdorf – Loading by overhead crane possible – Delivery at buyer’s expense possible ⸻ Documentation – Original operating manual GRAULE ZS 200 / ZS 200N – Manual for digital angle display Z-60 – Brochure/information sheets for the machine series ⸻ Conclusion: A professional, robust GRAULE industrial saw with digital angle display – ideal for companies that value precise mitre cuts, repeat accuracy, and efficient setup times.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Crosscut and Mitre Circular Saws Graule ZS 135 Motor: 400 V / 2.0 kW Speed: 3800 rpm Cutting length: 430 mm (at 90°) Cutting height: 135 mm Mitre range, horizontal: 45°-90°-25° Saw blade diameter: 350 mm Hodpjymqkljfx Akrol Extraction port: 100 mm Weight: 100 kg

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Hodpfsykvw Ssx Akrjl Equipment and technical data: - Swivels both sides up to 45° - Saw blade tiltable to one side up to 45° for vertical mitre cuts - Motor: 2 kW, 400 volt, 2800 rpm - Saw blade diameter: 300 mm - Extraction connection diameter: 75 mm - Cross cuts: 380 x 85 mm - Mitre cuts, saw blade vertical, 45° swivel to left or right: 265 x 85 mm - Mitre cuts, vertical, saw blade tilted 45° to the left: 380 x 60 mm Availability: short notice Location: 63934 Röllbach

Condition: good (used), cutting width 300 mm Cutting height 85 mm Motor output 1,5 kW saw-blade dia. 300 mm connected load frequency 380 V Hedpfoyiu Sfex Akrjl

Condition: used, Year of construction: 1999, power: 3 kW (4.08 HP), input voltage: 400 V, cutting height (max.): 200 mm, saw blade diameter: 520 mm, overall weight: 350 kg, cutting length (max.): 420 mm, mount diameter: 50 mm, saw drive: 3,000 W, No. 04511 Crosscut and mitre saw Graule ZS 200 N Hsdpfxjyh Nfue Akrsl Used, year of construction 1999 Saw can be swiveled and tilted 3 kW three-phase brake motor 400 V Saw blade diameter 520 mm Saw blade holder 50 mm Cutting height 200 mm Saw blade tilted to 45°: Cutting height 140 mm Cutting length 420 mm Table dimensions 900 x 700 mm LW Aluminium fence back With machine stand and hand crank at the rear for tilt adjustment Hydraulic feed brake Pneumatic material clamping on both sides from above Saw blade spray device for coolant or lubricant Carbide circular saw blade for aluminium and plastics, diameter 520 mm Roller conveyor type RLK 4000 mm, with fold-away material fence and scale Roller conveyor 4000 mm long after the saw Roller conveyor width 350 mm Transport dimensions machine approx. 1650 x 1200 x 1850 mm LWH, roller conveyors approx. 4500 x 400 x 1950 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Technical data: Max. saw blade diameter: 400 mm Min. saw blade diameter: 300 mm Saw spindle diameter: 30 mm Guide rail length: 1100 mm Miter cutting range: from –80° to +80° Bevel cutting range: from 0° to 90° Work table dimensions: 835x1175 mm Saw blade guard Power supply: 400 V Motor power: 3 kW Overall dimensions: Hsdpjyhnkfofx Akrel Length: 1400 mm Width: 1175 mm Height: 1600 mm

Condition: used, Year of construction: 1999, functionality: fully functional, OMS FC 350 R 2.2 kW Mitre Crosscut Saw – fully serviced, ready for operation Hsdpfx Ajyhg Ebjkrol Specification: • Condition: Used, after comprehensive technical inspection • Manufacturer: OMS • Model: FC 350 R • Blade diameter: 350 mm • Saw motor: 2.2 kW • Maximum cutting dimensions at 90°: 115 x 150 mm (height x width) • Saw blade guards for operator safety • Integrated internal chip extraction system • Cutting angle adjustment: +/- 45 degrees • Year of manufacture: 1999 • CE markings • Overall dimensions (without tables): 85 x 81 x 160 cm (L x W x H) Additional information: • The machine is in very good technical condition, ready for immediate use • The photos shown present the actual item for sale • Possibility to power on and check the machine on-site • The auction price does not include VAT or transport costs Financing and transport: • We organize transport with our MDD fleet, courier companies or external carriers • Financial support available in the form of leasing or lease-loans

Condition: used, Year of construction: 1999, functionality: fully functional, Crosscut saw, miter saw OMS FC 300 RAP 2.2 kW – after technical inspection Specification: • Technical condition – used, after inspection • Manufacturer – OMS • Model – FC 300 RAP • Blade diameter – 300 mm • Saw motor – 2.2 kW • Max. dimensions of workpiece at right angle: 95 x 125 mm (height x width) • Saw blade guards for operator safety • Extraction port – diameter 60 mm • Cutting angle adjustment: +/- 45 degrees (machine does not maintain perfect accuracy at extreme angles) • Year of manufacture – 1999 • CE marking • Overall dimensions without tables: 75 x 75 x 70 cm (L x W x H) Additional information: • The machine is in decent technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Possibility to power up and inspect the machine on site • The price listed in the auction does not include VAT or transportation costs Financing and transport: Hedpfxjyg R Spe Akrsl • We organize transport via MDD fleet, courier services, or external carriers • Financial support available in the form of leasing or lease loans

Condition: used, Crosscut Saw, Mitre Saw OMGA T50.350 2.2 kW - after technical inspection, ready for operation Hodpfx Aeyg R Nujkrel Specification: • Technical condition – used, after inspection • Manufacturer – OMGA • Model – T50.350 • Blade diameter – 350 mm (bore 30 mm) • Saw motor – 2.2 kW • Max. dimensions of cut element at 90°: 100 x 165 mm (H x W) • Safety covers on the saw for operator protection • Extraction outlet – ø80 mm • Cutting angle adjustment: +/- 45 degrees • Overall dimensions without extension tables: 75 x 62 x 80 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The attached photos show the actual condition of the item for sale • On-site inspection and operation check possible • The price listed in the auction does not include VAT or transport costs Financing and transport: • We organise transport by MDD fleet, courier companies, or external carriers • We offer financing support in the form of leasing or lease loans

Condition: good (used), functionality: fully functional, Double Mitre Saw DG79 - 2 x 2 kW - 380 Volt - Year of manufacture: 1988 - 2100 / 3800 rpm - Saw blade: 330 mm Ø - Cutting range at 90°: 195 x 90 mm; at 45°: 135 x 90 mm Hodpfjygm Akox Akrsl - Minimum cutting length 500 mm, maximum approx. 3300 mm - Compressed air 6-8 bar / 250 l/min - Weight: approx. 500 kg - Pneumatic clamping device Transport available at extra cost!

Condition: good (used), Table and mitre saw TGS 173 with sliding table - on mobile base cabinet with 2 drawers Hedpfx Asx R Eadokrol - leveling feet NOT included Transport available at extra cost!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, saw blade diameter: 520 mm, saw blade bore: 50 mm, total length: 1,750 mm, total width: 1,030 mm, total height: 1,800 mm, ❇️ Graule ZS 200 N – Crosscut and Mitre Saw | Very Good Condition | Fully Functional | UVV Safety Tested For sale on behalf of a customer is a high-quality Graule ZS 200 N crosscut and mitre saw from a window manufacturing business. The machine is in very good, well-maintained, and fully operational condition and has been used regularly up to now. A current UVV/safety inspection certificate is available (see photos). Inspection and functional testing on site are possible at any time. — ❇️ Technical Data: • Manufacturer: Graule Maschinenbau GmbH, Aalen • Model: ZS 200 N • Machine type: Crosscut & Mitre Saw (for aluminium, wood, plastic) • Saw blade Ø: 520 mm • Bore: 50 mm • Swivel range: wide mitre range (finely scaled) • Drive: 400 V • Area of application: Primarily for aluminium and profile processing • Design: Heavy-duty industrial build — ❇️ Features & Highlights • Very robust machine base • Large dual-sided worktable (laminated multiplex) • Pneumatic workpiece clamps • Extraction hood / suction port • Digital measuring / length stop system (display mounted above) • Precise swivel mechanism with angle scale • Ideal for aluminium profiles in window construction • Ready for immediate use • Only original Graule circular saw blades permitted (manufacturer’s instruction) — ❇️ Condition • Very good, well cared for, ready for immediate use • Fully operational • Maintained appearance • Still in use • UVV safety tested — ❇️ Sale & Handling • Invoice with VAT can be issued • Delivery or transport can be arranged at buyer’s expense • Location: 72229 Rohrdorf, Germany • Loading possible on site via hall crane — ❇️ Price: €6,750 (net) plus 19% VAT — ❇️ Dimensions: • Approx. D 175 cm x W 103 cm x H 180 cm — Hedpfxjx N Hxxo Akrsl ⚠️ I am also offering additional accessories for workshop and metalworking in my other listings. ‼️ Please also have a look at my other items. It’s worth it!