Twence

Year of construction: 2021, condition: ready for operation (used), A Burghardt cardboard shredding machine is available. Cutting width: 320mm, max. cardboard thickness: 12mm, throughput capacity: approx. 2m³/h, operating speed: 10m/min, motor power: 0.75kW, machine dimensions X/Y/Z: approx. 500mm/600mm/650mm, weight: approx. 100kg. Documentation vorhanden. An on-site inspection is possible. Iaedpfoyt N Atjx Abcsp

Condition: like new (used), functionality: fully functional, load capacity: 10,000 kg, MANUFACTURER: EXPRESSO TYPE: 12 110 ST LOADING RAMP IN PERFECT CONDITION WITH HYDRAULIC LIFTING SYSTEM. Isdjythn Iopfx Abcoap MOBILITY PROVIDED BY WHEEL UNDER THE RAMP. ADJUSTABLE SUPPORT LEG. ANTI-SLIP SYSTEM ADDED TO THE INCLINED SECTION. LOADING INCLUDED.

Condition: used, machine/vehicle number: 10521, Length of magnetic grinding table = 1300 mm Drive = 13.5 kW Magnetic table can be swiveled Iasdpfxsyr Tyys Abcjp Ideal for re-sharpening rotor and stator blades Water cleaning with filter cloth

Condition: used, machine/vehicle number: 12195, Inlet: 600 x 600 mm Iaedpfx Abjyr Tnqscjp Drive: 2 x 37 kW

Condition: used, machine/vehicle number: 9394, Year of manufacture: 2015 Technical Data: Main dimensions (length/height/width): 1430/1730/780 mm Iaodpfx Absyr Tliscop Discharge opening diameter: 102 mm Number of knives and blades: 3+1+9 Drive: 22 kW Total machine weight: approx. 400 kg Possible screen perforations: Ø 4–25 mm

Condition: new, The ZSH chipper series is specifically designed for forestry, horticulture, and municipal operations. These chippers are primarily used for volume reduction of tree and shrub cuttings as well as smaller trunk diameters. The produced wood chips are suitable for combustion in wood chip heating systems with screw conveyors or as a pre-stage in pellet production. The machines are robust, reliable, easy to operate, powerful, and produce wood chips of consistent quality and uniform size. Other features Cost-effective solution for wood chip production | Compact design | User-friendly | Low energy consumption Ijdpfx Asyr Tkfjbceap

Condition: new, machine/vehicle number: AMIS Kabelaufbereitung, System consisting of a granulator, sorting table for separating liberated plastic and copper granulate, extraction unit, and control cabinet. Each component is pre-assembled as a transportable element on base plates. Advantages of the compact system: Iaodpjyr Ti Usfx Abcjp low overall height, minimal space requirements, component arrangement designed for easy cleaning and maintenance, short installation time, and last but not least, attractive pricing.

Condition: new, machine/vehicle number: 10463, The AR series are slow-running machines. They are available with 2, 4, 6, or 8 screw shafts. Each screw unit is installed independently and separately in the chassis. Screw shredders are designed for the shredding of brittle materials (wood, paper, gypsum, mineral wool, etc.). The machines are largely insensitive to contaminants such as glass, metal parts, stones, etc. Iaodpfoyr Ti Isx Abcop The AR series is optimally suited for use as a bale opener, e.g., for PET bottle bales.

Year of construction: 2010, condition: ready for operation (used), A Hiller two-phase centrifuge for solid-liquid separation and dewatering is available. Drum speed: 2700rpm, max. operating speed: 2650rpm, max. feed material density: 1.3kg/dm³, drum inner diameter: 752mm, drum wall thickness: 20mm, drum material: 1.4470, max. operating temperature: 50°C, max. operating pressure: 0bar, motor power: 75kW. Machine dimensions X/Y/Z: approx. 5100mm/2300mm/1750mm, weight: approx. 11600kg. Documentation available. An on-site inspection is possible. Image is an example. Iajdpfx Aboyr Rwiscjp

Condition: new, In every economic and public sector calculation, waste transportation is a critical factor. Here, it is not so much the weight but rather the volume that matters. The continuously rising transport costs for this waste are becoming an increasing economic issue. Proper disposal of large quantities of polystyrene or packaging film is particularly important in the retail sector. The VOLUME REDUCER ensures a volume reduction of up to 80 percent at this point. Bottles of any type and size, e.g., sparkling wine bottles, can be shredded effortlessly without the need for a compression mechanism. It is also possible to unpack expired food products. Furthermore, reject items such as pharmaceuticals, data carriers, or counterfeit products can be rendered unusable. Food residues and organic waste, including bones, can be shredded, collected, and converted into electricity and heat in biogas plants using the VR60. Iodpfsyr I H Uox Abcjap Consider, for example, a reverse vending machine for deposit bottles. PET bottles are compressed and held under lock and key until collection due to the presence of a barcode. By using the VOLUME REDUCER, the barcodes on PET bottles could be made unrecognizable, thereby achieving significant volume reduction. The shredded bottles could then be collected in a large container, eliminating the need for daily collection at return points. The shredder's vertically moving, wear-free blades ensure a quiet and clog-free operation. ALL ADVANTAGES AT A GLANCE - Non-rotating shredder - No material entanglement thanks to non-rotating blades - Automatic feed through blade movement - Automatic reversing V-shaped blades prevent jamming or blockage - Fast component change thanks to modular system - Intelligent control via compact logic system (PLC) - One-button operation - Optional material discharge via conveyor belt - Shredder module can be integrated into existing systems - Low blade wear and maintenance costs due to highly abrasion-resistant steel with a nominal hardness of 600 HBW VR60 IN DETAIL - Dimensions: 90 cm x 70 cm x 85 cm - Weight: approx. 190 kg - Power consumption: 3 kW - Connection value: 400 V three-phase alternating current

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Vecoplan Vaz 1100 XL Iaedsymgdhspfx Abcop Year 2005 The machine is in very good technical condition. The knives have been recently replaced. 30 kW motor. The machine is fully operational and ready for use. Testing is possible. For more information, please call.

Year of construction: 2021, condition: ready for operation (used), A single-shaft shredder Erdwich for contaminant-free red brass and brass chips is available. Cutting unit dimensions X/Y: 600mm/500mm, height: 300mm, knife width: 25mm, screen hole diameter range: 25mm-35mm, machine dimensions X/Y/Z: approx. 1600mm/650mm/800mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Iaedpfx Aboymfc Necsp

Condition: good (used), Year of construction: 2018, functionality: fully functional, Loading system for automatic filling of 2 walking floor vehicles with loose waste/recyclables, consisting of a steel structure with maintenance platform, 2 traversing conveyors and one reversible conveyor, as well as optionally a chain belt conveyor for feeding from below. Conveying capacity approx. 200 m³/h. Iodpfoylzm Usx Abcjap

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. Iaedpsyizxrefx Abcsp All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2026, condition: new, functionality: fully functional, This robust professional cable stripping machine, model KM1-F, processes electrical cables with diameters ranging from 1 to 70 mm. This model features speed control via a frequency inverter. - The blades are hardened, ensuring they do not dull quickly when stripping armored cables. - The machine has 15 different cable feed entries. - The rollers feature grooves on their beveled surfaces for improved grip on the cables. - The cable is cut from both sides, allowing the copper core to be easily removed. - It is also suitable for stripping rubber and flat cables. - The machine meets all safety requirements. - A comprehensive service manual and user instructions are included. - Maintenance procedures are also detailed in the documentation. Technical specifications: - Power supply: 230 V ~ 50 Hz Ijdpjyfw Egsfx Abcjap - Power: 2200 watts with geared drive - Dimensions: 60 cm long x 75 cm wide x 90 cm high - Machine speed: adjustable - Output: Depending on the cable type, between 400 and 1200 kg/day - Weight: 185 kg - Price includes VAT Spare parts such as blades, drives, bearings, etc., are also available. If desired, we can also perform maintenance on these machines. A machine that is ready for immediate use and easy to operate. If you would like to test it, please bring your own cable.

Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, Description of the operating principle of the tire separator: The WAGNER used tire dismantling unit is designed, developed, and built so that the tire can be separated from the steel rim simply, quickly, and efficiently. The pressing process takes approximately 60 seconds. This is ensured by the powerful hydraulic system, engineered for long service life. The passenger car tire is placed onto the tire press machine. By actuating both valve levers (accident protection), the three hydraulic cylinders extend and press the tire together with the rim. Ijdpfxoyffrus Abcoap

Year of construction: 2008, condition: ready for operation (used), A large-format single-shaft shredder Vecoplan is available. Rotor diameter: 370mm, effective rotor length: 1300mm, speed: 120rpm, knife rows: 37, knife dimensions X/Y: 40mm/40mm, feed opening X/Y: 1400mm/1300mm, hopper volume: approx. 3m³. Machine dimensions X/Y/Z: 3200mm/2400mm/1500mm, weight: approx. 5500kg. An on-site inspection is possible. Iasdpfxsyddyze Abcep

Year of construction: 2002, operating hours: 12,000 h, condition: ready for operation (used), functionality: fully functional, power: 382 kW (519.37 HP), transport height: 4,000 mm, MACHINE DETAILS Shreddable materials: metals, aluminium, plastic, wood, cars Transport height: 4,000 mm Power: 382.46 kW Operating hours: 12,000 h Iasdpfx Abox U S I Aocjp EQUIPMENT Remote control Overband magnet Semi-trailer

Condition: good (used), Year of construction: 2012, functionality: fully functional, Rotary Airlock Valve / Rotary Valve Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge strips Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Max. volumetric flow: 28,000 m³/h Iodsx Uz I Sepfx Abcsap Max. inlet diameter: 450 mm Speed: 22 rpm Rotor width: 1,500 mm Rotor diameter: 1,200 mm Dimensions: 2,200 x 2,200 x 2,500 mm (LxWxH) Weight: approx. 3,000 kg Remarks: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find the video above on our website or on our YouTube channel. Inspections, including under power, are possible at any time by prior arrangement. We are happy to answer your questions about the machine by phone, Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We do not accept liability for the stated information or possible errors. Offers are non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. Sale is ex-works, advance payment required, without warranty or guarantee.

Year of construction: 2014, condition: ready for operation (used), An industrial Pyreg pyrolysis plant for the thermochemical utilization of biogenic residual materials is available. Fuel capacity: 500kW/module, max. fuel throughput capacity per module: 1375kg/year, min. fuel lower heating value on dry basis: 10MJ/kg, max. fuel moisture content: 50%, biochar production: 40kg/h, thermal heat output (exhaust gas heat): 150kW, power consumption: approx. 7.5kW. Plant dimensions X/Y/Z: approx. 9000mm/3000mm/3000mm, weight: approx. 10000kg, control system: PLC. Documentation available. An on-site inspection is possible. Iasdox Sywgopfx Abcsp

Condition: ready for operation (used), Optical separator Titech Tomra Brand: Titech Tomra Type: Autosort NIR1 S2000 X-L Iaodpfox Sttbox Abcjp

Condition: ready for operation (used), Optical separator scheider Titech Tomra Brand: Titech Tomra Type: Autosort NIR1 S2000 X-L Incl.: belt conveyor length 5000 mm, Ijdpfxsx Str Rs Abcoap Beltwidth 2000 mm.

Year of construction: 2010, condition: good (used), Air shower booth for cleaning work clothing The unit is mounted on a pallet and also features a crane eye for easy relocation. Iaodpfx Aex I Nidsbcop Power supply: 400 volts

Year of construction: 2008, condition: ready for operation (used), A Strautmann plastic briquetting press is available. Pressing force: 300kN, hopper type: TS 1600, system dimensions X/Y/Z: approx. 6750mm/1900mm/2750mm. Documentation available. An on-site inspection is possible. Iaodpfex El Ahox Abcep

Condition: ready for operation (used), Forklift Mitsubishi  Brand : Mitsubishi Lifting capacity  4 tons Max lifting height 5500 mm Gas-powered Iasdpfsx Egrbsx Abcjp Construction year 2012 Price 7000 Euro