FISS - Friedrich // Industrial // Solutions // Services

Condition: good (used), Functionality: fully functional, FRECH DAK 580-62 DRC Die-Casting Machine, used Machine number 430302, pressing force 5800 kN, opening force 155 kN, maximum opening stroke 680 mm, double toggle lever (mould lock), pressure chamber design cold chamber, press-in force 589 kN, filling piston diameter 60 to 110 mm, filling volume of pressure chamber 1101 to 3700 cm³, specific pouring pressure 642 to 2155 bar, largest blast area approx. 274 to 920 cm³, clamping plates 1120 x 1120 mm, clear width between columns 700 x 700 mm, mould height max. 800 mm, min. 350 mm, mold area 446 x 446 mm, 4 columns, column cross-section 140 mm³, software version SBS 20.10 VISUALIS 17.10, including dosing furnace MELTEC AVDF 1200/5000, year 2016, Serial number 3376/16, handling robot ABB, spray head, temperature control unit REGLOPLAST 300DG/12/FM30/1K/RT45, serial number 371412, without year of manufacture. Technical attributes dimensions (l x w x h) approx. 8000x5500x3500mm weight approx. 36000kg year of construction 2000 Klolhowc Tn Tecdwzjt

Condition: good (used), Year of construction: 2001, Functionality: fully functional, FRECH DAK 720-71 RC Die-Casting Machine, used Machine number 440403, clamping force 8000 kN, clamping stroke 825 mm, ejection force 364 kN, ejection stroke 180 mm, mould height 350 to 1000 mm, clamping platens 1300 x 1300 mm, column distance 825 mm, column diameter 180 mm, casting force max. 713 kN, casting stroke 600 mm, casting piston diameter 70 to 120 mm, casting volume 1539 to 4523 cm³, operating pressure 160 bar, drive motor 45 kW, Kjlhcdjwc Tdzewzslt with dosing furnace MELTEC AVDF 1200/5000, year 2017, serial number 3469/17, 30 kW, handling robot ABB, year 2007, with control system, spray head, power supply unit in control cabinet missing, pump defective, as spare parts donor Technical attributes dimensions (l x w x h) approx. 8000x7500x3500mm weight approx. 36000kg year of construction 2001

Condition: used, Year of construction: 2017, heating capacity 2 x 12 kW Cooling capacity 2 x 35 kW Used heating and cooling unit from Robamat for die casting machines. This two-circuit device is designed for the temperature control of die casting tools with water. Available ex stock. Checked, maintained and repaired at service partner of the manufacturer Circuits: 2 Flow temperature max. 160°C Heating capacity 2x 12kW Cooling capacity 2x 35kW Voltage 3x 400V / 50Hz Production cycle - break Interface RS485 new pump protection filter casing and filter insert Kleljv U Dl Iehcdwzet

Condition: used, Year of construction: 1997, Functionality: fully functional, clearance between the columns: 579 mm, casting force: 350 N, casting stroke: 420 mm, column diameter: 125 mm, overall weight: 12,000 kg, power: 22 kW (29.91 HP), Locking Force: 350 metric tons Tie Bar Diameter: 125 mm Clearance Between Tie Bars: 579 x 579 mm Kjlhcov D Dwpjdwzolt Die Thickness (Minimum - Maximum): 300 - 700 mm Die Stroke: 420 mm Moving Platen Size: 940 x 940 mm Injection Position: -125 mm Power Requirement: 22 kW Machine Weight: 11,974 kg (26,400 pounds) Sold with trimming press and manipulator.

Condition: good (used), Year of construction: 2011, SN: 1736, consisting of: cold chamber die casting machine, make Colosio, type PFO 1200, year of manufacture 2011, SN 1736, specification: clamping force 1,235 t, max./min. pressing force 82.5/29 t, central ejector 46.2 t, adjustment of the movable mold plate max./min. 1,000 - 500 mm, pressing stroke 730 mm, stroke of central ejector 210 mm, mold height max./min. 1,100 - 450 mm, distance between the columns 995 x 995 mm, external dimensions of mold plate 1,540 x 1,540 mm, guide column Ø 205 mm, pressure area (400 kg/cm²) max. 3,085 cm², pump motor power 60 kW (2x 30), operating pressure 140 bar, piece weight (aluminum) max. 20 kg, minimum size of the mold 720 x 720 mm, room dimensions 3,580 x 10,774 x 3,702 mm, dead weight 54,700 kg, control, make Colosio, aluminum melting and dosing furnace, make Foundry 4, type TD1400DC, year 2015, SN F415-0328, specification: capacity 1,400 kg, working weight 1,200 kg, 2,900 x 1,600 x 2,125 mm, dead weight 3,125 kg, size of adjustment device 4.5 t, stroke of adjustment device 400 mm, heating output 22 kW, energy consumption in warming mode 8 kW/h, control cabinet in the basement, linear sprayer, make AED Automation, type DAG1000MCT2B, year of manufacture 2011, SN SO091422, with control cabinet in the basement, 6-axis industrial robot, without type plate, with control cabinet, make Kuka, extraction hood, with walk-on platform, knock-off station, 2-part cooling rack, cooling tunnel, with belt conveyor, protective fence, with safety device, quenching basin, deburring press, make Reis, type SEP13-65 D III, SN 1002212, control cabinet, hinged conveyor belt, make. Westa, type SPB150L63S-600-35°, SN 20115023, Specification: Belt conveyor line, make Westa, type 1115, SN 20115, approx. 6,000 mm Klelhcdsv Aaprjwzjt

Condition: new, Year of construction: 2024, closing pressure 2200 kN clamping plate 755x755 mm distance between columns 500x500 mm weight of the machine ca. 8 t lock stroke 430 mm capacity of ejector 110 kN ejector stroke 100 mm height of form 250-600 mm column diameter 85 mm casting capacity 130 kN casting plunger stroke 175 m/m injection plunger diameter 70,80,90 mm casting volume (DIN 24480) 450,636,856 cm ³ volume cast pressure 335,260,203 kp/cm² casting area 656,846,1078 cm 2 Traverse Stroke 230 m/m Used Die Casting machine DAW XX with XX control and real-time injection for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ XX and used pneumatic sprayer XX. Without sprayer. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement. Kjlhcdwsvvx Hcjzjlt ----- Used Die Casting machine DAW XX with XX control for the use of zinc alloys. Available from used machine stock. On the machine some repairs were carried out by us as manufacturer. Amongst other things, the closing unit was overhauled, all cylinders new sealed and recognizable defective parts replaced. The machine is equipped with an electric furnace from Rauch Typ XX and used pneumatic sprayer XX. Without sprayer. ----- Used Die Casting machine DAW XX without control and equipment. As a basic machine for general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Year of construction: 2021, heating capacity 20 kW Cooling capacity 60 kW Used heating and cooling unit from Robamat for die casting machines. This single-circuit device is designes for the temperature control of die casting tools with oil. Single circuit oil unit Heating capacity 20 kW Cooling capacity 60 kW Operating temperature up to 250 °C maximum Equipment: - GO.I10.32.1 oil return suction with automatic ventilation for 3201 - GO.I14.1.60 blow out function cooler, 60 kW, single circuit unit - GO.I16.E18 return thermocouple ½“ Fe-CuNi, 1 circuit - GO.I22 level indication minimum - minimum advance warning - maximum, signal lamp red and white - GO.I25.1 oil filling front, 1 circuit oil - GO.I27 oil tank cap self-closing - GO.I28.3 flow measurement, version turbine, radial flow turbine 3 to 45 l/min - GU.I18.1.H interface RS 485 without connection cable Kslhcsu T Sf Ijdwzslt inclusive 4-line display for single circuit unit - GU.I49 operation status indication, signal lamp green, 1 circuit - GU.I100 Software: maintenance menu - GU.I101 Software: energy consumption measurement - ZA.020.101 pump protection filter ½” oil, with analog dirt indication, type Hydac The device was checked, repaired and maintained at our service partner

Condition: like new (used), Year of construction: 2023, operating hours: 450 h, Functionality: fully functional, overall weight: 56,000 kg, Clamping force: 11.168 kN Clamping force: 1.138 Ton Ejection force: 433 kN Max. die height: 1,050mm Min. die height: 450mm Plate dimensions HxV: 1.620 x 1.620mm Tie bar spacing: 1.000 x 1.000mm Kjlhcdju Svacswzslt Tie bar diameter: 200mm Movable platen stroke: 960mm Ejection stroke: 230mm Working pressure: 180 bar Dry Cyclyng: 2.5 n/1" Pump motor power: 45kW Machine weight: 56T Machine dimensions: 10.8 x 4.5x 4.3m

Condition: used, Year of construction: 2006, heating capacity 20 kW Kjlhcdwouzafuezslt Cooling capacity 60 kW Used heating and cooling unit from Robamat for die casting machines. This single-circuit device is designes for the temperature control of die casting tools with oil. Circuits: 1 Flow temperature max. 250°C Heating capacity 1x 20kW Cooling capacity 1x 60kW Voltage 3x 400V / 50Hz Pump typ / capacity PM1

Condition: good (used), Year of construction: 1991, Accessories: 1)Ladle Kslhjum Rd Docdwzjlt 2)Sprayer Specifications: Locking Force: 650 tons Distance Between Tie Bars (W × H): 750 × 750 mm (29.5" × 29.5") Tie Bar Diameter: 160 mm (6.3") Stationary Platen (W × H): 480 × 1290 mm (18.9" × 50.8") Movable Platen (W × H): 480 × 1200 mm (18.9" × 47.2") Back Platen (W × H): 650 × 1200 mm (25.6" × 47.2") Die Height (Min-Max): 350 - 900 mm (13.8" - 35.4") Die Stroke: 550 mm (21.7") Die Injection Force (Min-Max): 25 - 52 tons Injection Speed: 0.1 - 5 m/sec (3.9 inch) Shot Position (below center): 0 - 175 mm (0" - 6.9") Plunger Stroke: 500 mm (19.7") Plunger Tip Diameter: 75 - 95 mm (3" - 3.7") Ejection Force: 25 tons Ejection Stroke: 125 - 0 mm (4.9" - 0") Dry Cycle Speed (max, load): 4.5 sec

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, TECHNICAL DETAILS Press: Tecnopress KZP 40 Robot: ABB Robotics IRB4400 M97A Oven: Westofen WESTOMAT 90S MC Lubricator: Wollin PSM-324 Kslhjul Srajcdwzolt

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, TECHNICAL DETAILS Press: Tecnopress KZP 40 Kolhjul Sl Tscdwzslt Robot: ABB Robotics IRB4400 M97A Oven: Striko Westofen W 900SL ProDos Lubricator: Wollin PSM-336

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Klolhcdwsucfwpozet

Condition: ready for operation (used), Year of construction: 1982, Clamping force: 300t, mold clamping area X/Y: 880mm/880mm, plunger stroke: 400mm, column diameter: 100mm, ejector force: 18t. Height adjustment: 200mm, clamping surface between the columns X/Y: 555mm/555mm, mold height min./max.: 200mm/650mm, mold opening stroke: 540mm, max. casting weight: 5.2kg. Dimensions X/Y/Z: approx. 6150mm/1950mm/2615mm, weight: approx. 16000kg. This machine is a spare parts carrier. Controls, electrics and paintwork must be renewed. On-site inspection is possible. Klslhstt Dybecdwzet

Condition: new, Year of construction: 2024, closing pressure 1250 kN clamping plate 620x620 mm distance between columns 400x400 mm weight of the machine ca. 6,0 t lock stroke 340 mm capacity of ejector 80 kN ejector stroke 90 mm height of form 170-500 mm column diameter 75 mm casting capacity 100 kN casting plunger stroke 150 m/m injection plunger diameter 60,70,80 mm casting volume (DIN 24480) 205,330,475 cm 2 volume cast pressure 352,259,198 da/cm² casting area 354,481,629 cm 2 Traverse Stroke 270 m/m Equipment of the machine 1.0.2Cover for drop through area at the subframe with scale/chute 1.1.0Motorized guard in casting direction left 1.4.0Machine positioning mounting pads 1.5.4Machine interior illumination 1.11.0Convenience package energy efficiency 2.0.1Ejector assistance packages 2.6.4Machine assistance system SensiLock 2.8.0Hydraulic adjustment of locking unit for shot positioning 3.0.1Casting assistance package Basic 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4Prefilling process 3.4.5Simplified piston removal 3.4.6Piston stop during return stroke 3.5.2Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0Shut-off facility for hydraulic locking and injection unit 4.6.1.3Integrated water circuit 2+6 circuits 5.1.0Machine control DATADIALOG - Realtime Control (RC) 5.1.5Maintenance plus package 5.6.0Special cable lengths 6.1.3.1Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1Hanging operating desk with monitor 6.5.2Service Package RSD with Switch for each additional machine 7.2.2.2Spraymotion 611 E with servo drive, 1-circuit 7.2.10Extended spraying program for spraymotion 7.3.1Lubricant container TD 20 7.4.4Spray rail CR 345 Kjlhcdsr H Ug Aswzelt

Condition: new, Year of construction: 2024, closing pressure 240 kN clamping plate 380x380 mm distance between columns 250x250 mm weight of the machine ca. 3,0 t lock stroke 180 mm capacity of ejector 28 kN ejector stroke 50 mm height of form 120-300 mm column diameter 45 mm casting capacity 43 kN casting plunger stroke 85 m/m injection plunger diameter 36,40,45 mm casting volume (DIN 24480) 47,63,87 cm ³ volume cast pressure 420,340,270 da/cm² casting area 56,70,88 cm 2 Traverse Stroke 150 m/m Equipment of the machine 1.0.2Cover for drop through area at the subframe with scale/chute 1.1.0Motorized guard in casting direction left 1.4.0Machine positioning mounting pads 1.5.4Machine interior illumination 1.11.0Convenience package energy efficiency 2.0.1Ejector assistance packages 2.6.4Machine assistance system SensiLock 3.0.1Casting assistance package Basic 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4Prefilling process 3.4.5Simplified piston removal 3.4.6Piston stop during return stroke 3.5.2Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0Shut-off facility for hydraulic locking and injection unit 4.6.1.2Integrated water circuit 2+4 circuits 5.1.0Machine control DATADIALOG - Realtime Control (RC) 5.1.5Maintenance plus package 5.6.0Special cable lengths 6.1.3.1Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 Kjlhcdwjr Hwfxjzelt 6.1.5 Interface for Vacuum unit 6.3.1.1Hanging operating desk with monitor 6.5.2Service Package RSD with Switch for each additional machine 7.2.1.2Spraymotion 411 E with servo drive 7.2.10Extended spraying program for spraymotion 7.3.1Lubricant container TD 20 7.4.0.1Spray rail CR 155 7.12.3 Low noise chute

Condition: new, Year of construction: 2024, closing pressure 900 kN clamping plate 540x540 mm distance between columns 350x350 mm weight of the machine ca. 5,3 t lock stroke 280 mm capacity of ejector 61 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 78 kN casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm casting volume (DIN 24480) 147, 191, 241 cm 2 volume cast pressure 396, 327, 275 da/cm² casting area 226, 274, 326 cm 2 Traverse Stroke 220 m/m Equipment of the machine 1.0.2Cover for drop through area at the subframe with scale/chute 1.1.0Motorized guard in casting direction left 1.4.0Machine positioning mounting pads 1.5.4Machine interior illumination 1.11.0Convenience package energy efficiency 2.0.1Ejector assistance packages 2.6.4Machine assistance system SensiLock Kljlhcsr Hwf Aedwzjt 2.8.0Hydraulic adjustment of locking unit for shot positioning 3.0.1Casting assistance package Basic 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4Prefilling process 3.4.5Simplified piston removal 3.4.6Piston stop during return stroke 3.5.2Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0Shut-off facility for hydraulic locking and injection unit 4.6.1.3Integrated water circuit 2+6 circuits 5.1.0Machine control DATADIALOG - Realtime Control (RC) 5.1.5Maintenance plus package 5.6.1Special cable lengths 6.1.3.1Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1Hanging operating desk with monitor 6.5.2Service Package RSD with Switch for each additional machine 7.2.2.2Spraymotion 611 E with servo drive, 1-circuit 7.2.10Extended spraying program for spraymotion 7.3.1Lubricant container TD 20 7.4.0.3Spray rail CR 275

Condition: good (used), Year of construction: 2013, 1 used vacuum system for die casting machines (vacuum die casting process) manufactured by Fondarex Type Highvac Progress 200/25 year 2013 Kjljpmqqlshcdwzjlt

Condition: repair required (used), Year of construction: 2017, high-pressure casting seat, used to make magnesium castings, which includes a group of devices, the most important of which are: 1. RAUCH heating furnace, year of manufacture 2016 x 2 2. REGLOPLAST heating and cooling device, man. 2017 x 2 Kjlhcdwonmyqpozelt 3. SPECIMA SM 2 biaxial injector, year of manufacture 2017 x 2 4. Trimming press, man. 1986 (after reconstruction in 2017) x 2 5. KUKA robot, year of production 2017 x 2 6. BUHLER GDM-H-630-B injection molding machine, man. 1997, (after reconstruction in 2017) 7. BUHLER GDM-H-400 8. 4 x Filters KMA

Condition: like new (used), Year of construction: 2002, Last chance before machine removal. Machine will be started to be removed in May 20-21st. High pressure die casting machine. OleoPress OL 1200 YOM 2002 Clamping force 1250 Tons Deburring press Brescia Presse YOM 2002 ABB Robot extraction robot Kolhcdei Dtqmjwzjlt Dosing furnace Striko Westofen YOM 2007 Cooling basin More details on request

Condition: new, Year of construction: 2024, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Column diameter 56 mm casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine Klolhcsiu Smbedwzjt 1.0.1Cover for drop through area at the subframe 1.0.2Cover for drop through area at the subframe with scale/chute 1.1.0Motorized guard in casting direction left 1.4.0Machine positioning mounting pads 1.5.4Machine interior illumination 1.11.0Convenience package energy efficiency 2.0.1Ejector assistance packages 2.4.2Securing of ejector platen 2.6.4Machine assistance system SensiLock 2.8.0Hydraulic adjustment of locking unit for shot positioning 3.1.1Nitrogen pressure control for piston accumulator 3.2.4Multi-Chamber furnace with pump 3.2.5Isolated Cover for Crucible Multi-chamber-furnace 3.4.4Prefilling process 3.4.5Simplified piston removal 3.4.6Piston stop during return stroke 3.5.2Electric nozzle and gooseneck heating (extended version) 4.5.0Shut-off facility for hydraulic locking and injection unit 4.6.1.2Integrated water circuit 2+4 circuits 5.1.0Machine control DATADIALOG - Realtime Control (RC) 5.1.2Convenience Package – Casting – 5.2.1Ejector Pressure graphics in DATADIALOG control 5.4.1Data logging Scope 5.4.2Configurable In- and Outputs 5.6.0Special cable lengths 6.1.3.1Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1Hanging operating desk with monitor 6.5.2Service Package RSD with Switch for each additional machine 7.2.2.2Spraymotion 611 E with servo drive, 1-circuit 7.2.10Extended spraying program for spraymotion 7.3.1Lubricant container TD 20 7.4.0.2Spray rail CR 245 7.12.3Low noise chute

Year of construction: 2000, Condition: used, total power requirement kW weight of the machine ca. t required space m Used furnace cabinet for die casting machine Frech type DAW 80 - suitable for multi-chamber furnace MELTEC - type 80/180 with individual controls. Has been checked for functionality by the manufacturer. Kelhcdjhwt Rbswzjlt

Year of construction: 1992, Condition: used, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm Klelhcdofrvzvjwzjt height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: like new (used), Year of construction: 2000, machine/vehicle number: 32577, Automated high-pressure die casting machine Bühler. 7900 kN clamping force. 500 mm plunger stroke Kolhcsfbl E Sjdwzolt Air conditioning KMA / Bentleon type Ultravent / AFS 6000 (2000) The machine is DISMANTLED. Has been repainted recently.

Condition: like new (used), Year of construction: 1995, machine/vehicle number: 10262342, Automated high pressure die casting machine Bühler. 9800 kN clamping force. Kelhcdwjfbl Enezelt Machine is DISMANTLED