CarComm International BV

Condition: used, Year of construction: 2006, Arburg 370U 600-290 (2006) 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Todpfj Ahgdqsx Aired Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: good (used), Year of construction: 2003, operating hours: 30,322 h, Demag Ergotech-Viva Tsdpfo Ag Tfpsx Airod 500-270 EXTRA Closing force: 50 tons Year of manufacture: 2003 Center distance: 35.5 x 35.5 Installation height: 210 mm Screw diameter: 30 mm Displacement: 144 cm3 Operating hours: 30,322

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, clamping force: 490 kN, screw diameter: 22 mm, injection pressure: 3,487 bar, injection weight: 42 g, ejector force: 26,000 N, ejector stroke: 60 mm, total length: 2,650 mm, total width: 1,574 mm, total height: 2,858 mm, overall weight: 3,500 kg, Equipment: documentation/manual, Witam Sprzedam stanowisko zrobotyzowane składające się z wtryskarki oraz robota przemysłowego FANUC M-10iD/10L, wykonane przez firmę WJATECH w 2023 roku. Stan idealny, bardzo mały przebieg: robot – zaledwie 132 minuty pracy, czyli 2 godziny i 12 minut, wtryskarka – kilkaset godzin pracy. Dane stanowiska: producent: WJATECH Sp. z o.o., typ: WJA-E235P-A-SR, rok produkcji: 2023, masa: 4600 kg, moc zainstalowana: 13 kW, zasilanie: 3 × 400 V, 50 Hz, prąd: 32 A, ciśnienie robocze instalacji pneumatycznej: 6 bar, zapotrzebowanie na sprężone powietrze: 1200 Nl/min. Robot przemysłowy: Tjdpfx As Agvtwjired producent: FANUC, model: M-10iD/10L, data produkcji: sierpień 2021, typ: A05B-1227-B322, masa robota: 150 kg. Oferta dla firm poszukujących stanowiska do automatyzacji produkcji z minimalnym czasem użytkowania. Cena do negocjacji

Condition: ready for operation (used), Year of construction: 2007, clamping force: 800 kN, Hydraulic injection moulding machine manufactured in 2007. This Engel VICTORY 330/80 Tech features a clamping force of 800 kN and an injection pressure of 1,600 bar. It has an opening stroke of 456 mm and an ejector stroke of 100 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 330/80 Tech machine we have for sale. Contact us for further details. - Defective / Non-operational (control unit KEBA Kemro CP 251/Z fails to boot and displays error code "8")- Design: Tie-bar-less (Holmlos) - Injection Volume: 154 cm³ - Injection Pressure: 1,600 bar - Opening Stroke: 456 mm - Ejector Stroke: 100 mm - Total Weight: 5,300 kg - Dimensions (L × W × H): Approx. 4,000 × 1,400 × 2,300 mm - Controller: KEBA Kemro K2-200 CP 251/Z (CC 200) - Optional available (not included): Automation, 3-axis handling system, conveyor belt Tjdpo Agvcyofx Aired

Condition: good (used), Year of construction: 2011, operating hours: 48,060 h, clamping force: 35 kN, screw diameter: 18 mm, clearance between the columns: 32 mm, displacement volume: 23 cm³, injection weight: 21 g, SUMITOMO shi-Demag Systec 35/320-25 Closing force: 35 tons Year of manufacture: 2011 Tie bar diameter: 18 mm Tie bar spacing: 32x32 Mounting height: 320 mm Tjdpfxo Agpcqe Airsd Operating hours: 48,060

Condition: ready for operation (used), Year of construction: 2014, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 7230-0232, clamping force: 500 kN, screw diameter: 25 mm, • Sumitomo SHI Demag IntElect 50/370-110 Todpfx Aie Aggumered • Year of manufacture: 2014 • Machine no.: 7230-0232 • Clamping force: 500 kN / 50 t • Tie bar spacing: 370 mm • Injection unit: 110 • Screw diameter: 25 mm • Control system: NC5 / CDIAS • including removal device Geiger MiniServo 1.5 • Approximately 12 million cycles In addition, we are selling a Sumitomo SHI Demag IntElect 50/370-110, year of manufacture 2013. Both machines have extensive features, including electric ejectors and screw drives, active tool protection functions, process data recording, and interfaces for handling and peripheral devices. The machines were in operation until they were dismantled. If you are interested, we would be happy to provide you with further information and images. Our asking price for the complete package, including both machines and both Geiger removal devices, is €55,000 net, ex works.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 61,679 h, functionality: fully functional, machine/vehicle number: 7230-0182, clamping force: 500 kN, screw diameter: 22 mm, • Sumitomo SHI Demag IntElect 50/370-110 Tedpo Aggpaofx Airjd • Year of manufacture: 2013 • Machine no.: 7230-0182 • Clamping force: 500 kN / 50 t • Tie bar spacing: 370 mm • Injection unit: 110 • Screw diameter: 22 mm • Control system: NC5 / CDIAS • PLC operating hours: approx. 61,679 h • Drive operating hours: approx. 56,166 h • Heater operating hours: approx. 57,914 h • Total cycles: approx. 11.9 million • incl. Geiger MiniServo 1.5 parts removal device In addition, we are selling a Sumitomo SHI Demag IntElect 50/370-110, year of manufacture 2014. Both machines feature extensive equipment, including electric ejectors and screw drives, active tool protection functions, process data acquisition, and interfaces for handling and peripheral devices. The machines were in operation until they were dismantled. If you are interested, we will gladly provide you with further information and images. Our asking price for the complete package consisting of both machines, including both Geiger parts removal devices, is €55,000 net, ex warehouse.

Condition: ready for operation (used), Year of construction: 2015, clamping force: 900 kN, controller manufacturer: ENGEL, controller model: cc300, This 4-axis Engel Victory 200/90 tech + Viper 6 RC300 was manufactured in 2015. It features a clamping force of 90 tonnes and an injection unit size of 200. The machine includes a central ejector system and a magnetic clamping system for enhanced efficiency. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 200/90 tech + Viper 6 RC300 hydraulic injection moulding machine we have for sale. Contact us for further details. Tjdpfe Af Tyzox Airsd ENGEL Victory 200/90 tech- Clamping Force: 90 tonnes - Injection Unit Size: 200 - Total Operating Hours (Machine): 15,903 h - Operating Hours in Automatic (Robot): 12,086 h - Clamping Platen Execution: Tie-bar-less standard platen according to EUROMAP - Centring Diameter: 125 mm EUROMAP - Magnetic Clamping System: Stäubli magnetic clamping plate - Ejector System: Central ejector with ejector safety interface - Heating System: 230 V ceramic cylinder heating bands ENGEL Viper 6 RC300- Maximum Manipulation Weight (Payload): 5 kg- Robot Axis Strokes: X-Stroke: 400 mm Y-Stroke (Single): 1,000 mm Z-Stroke: 2,360 mm C-Axis: Compact pneumatic rotary axis, 0–90° pivot, torque 6 Nm- Minimum Deposit Height: 1450 mm (center of unswiveled C-axis, without gripper head and part) - Max. Vertical Part / Gripper Head Size (TV): 200 mm - Maximum Total System Height: 4100 mm (handling and machine incl. machine shoes) - Part Deposit Side: Machine rear side - Entry Movement: Vertical

Condition: excellent (used), Year of construction: 2014, ARBURG A 370 S 700-290 U-Version (S&P 3804) Manufacture year: 2014 Todpfx Aio Af Ryksred Operating hours: 41,257 Stunden Screw: 40 mm Injection pressure: 1530 bar Stroke volume: 188 cm³ Clamping Force: 70 t Tie bar distance: 370 x 370 mm Mould installation height min.: 200 mm Plate distance max.: 600 mm Dimensions: 3700 x 1400 x 2000 mm Eeight: 3580 kg Connected load: 15 kW U-Version = clamping and injectionside could be turned into vertical and horizontal position, 1 x corepuller, 6 x hotrunner, Airvalve, Interface colorizing, 23.761 h automatic and 17.496 h manual... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2012, ARBURG A 375 V 500-170 Turntable (S&P 3773) Manufacture year: 2012 Operating hours: 36,900 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 50 t Mould installation height min.: 170 mm Plate distance max.: 520 mm Dimensions: 3300 x 1700 x 2100 mm Eeight: 3740 kg Connected load: 11 + 11 = 22 kW Vertical injectionmoldingmachine with a 900mm turntable, 2 station 180°, incl. Option for horizontal injection into parting line incl. lifting table, Robot Interface EM67, Airvalve, EM73, Hotrunner etc...price when new approx. 170.000,- Euro Price: on request Tjdpfx Aij Af Ru Rjred contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2016, ARBURG A 370 H 600-170 Integralpicker V (S&P 3801) Manufacture year: 2016 Operating hours: 45,447 Stunden Screw: 25 HVF mm Tjdpfe Af Rt Ejx Airjd Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 60 t Tie bar distance: 370 x 370 mm Mould installation height min.: 200 mm Plate distance max.: 650 mm Dimensions: 4000 x 1700 x 2300 mm Eeight: 3700 kg Connected load: 5,5 / 26 kW incl. Integralpicker V, EM67, Interface color, Airvalve, Corepuller, electric Convejorbelt, Sorter Unit, price when new machine 104.200,- Euro + picker 10.500,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 61038312, clamping force: 10,000 kN, screw diameter: 95 mm, clearance between the columns: 1,420 mm, displacement volume: 3,367 cm³, injection pressure: 1,795 bar, injection weight: 2,391 g, opening stroke: 3,200 mm, total length: 10,860 mm, total width: 3,400 mm, total height: 2,640 mm, overall weight: 50,500 kg, drive type: Hydraulisch, clear span: 1,420 mm, tool weight: 21,00,000 g, Injection molding machines directly from the manufacturer! As the manufacturer, KraussMaffei offers you our tested and versatile stock machines: The hydromechanical two-plate clamping unit of the GX machine sets new standards in terms of quality and productivity. The sophisticated GuideX guide shoe absorbs forces ideally and increases the service life of the tools. The innovative GearX locking system engages immediately and reliably. The high flexibility of the machine is particularly evident in the multi-component version. In this piggyback arrangement (Z-configuration), the system is extremely compact, and no special hall height is required, making this design particularly suitable for confined spaces. TECHNICAL DATA: KM 1000 / 6100 GX G02 (Order 38611785) CONTROL  MC6 with 21.5” TFT color screen and multi-touch function CLAMPING UNIT  Clamping force kN 10000  Tool opening force, max kN 700  Daylight (h x v) mm 1420 x 1170  Mounting plate (h x v) mm 1950 x 1750  Tool installation height min. - max. mm 500 – 1200  Opening width mm 2400  Tool opening stroke max. mm 1900  Ejector drive Hydraulic  Ejector stroke mm 300  Ejector force forward/backward kN 142 / 76  Max. tool weight kg 21000 INJECTION UNIT  Screw diameter / type mm 95 / Standard  Effective Ls/D ratio 23  Injection pressure bar 1795  Stroke volume cm³ 3367  Shot weight at max. stroke for PS g 2391  Injection speed mm/s 110  Injection flow rate cm³/s 780  Screw drive / speed 1/min 147  Plasticizing flow rate (standard screw) 4) g/s 102  Nozzle system force kN 166 ELECTRICAL PARAMETERS  Installed heating power kW 54  Power supply V / Hz 400 / 50 WEIGHT AND DIMENSIONS  Net weight with control cabinet t 50.5  Length x width x height m 10.86 x 3.40 x 2.64 ADDITIONAL EQUIPMENT  Enlarged mold opening width  Core pull hydraulic 3+1  Core pull pneumatic 1+1  Air valves 1+1 Tjdpfx Ae Afhmksirjd  Pneumatic cascade valve 3 +1  Hydraulic cascade 8  Water manifold 10  Euromap interfaces E18, E67, E77  Adaptive Process Control (APC+) The machine is located at our plant in Parsdorf and is available for short-term delivery. Further optional equipment can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 61037303, clamping force: 1,600 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,564 bar, injection weight: 432 g, mold height (min.): 500 mm, ejector force: 3,300 N, ejector stroke: 175 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 6,100 mm, total width: 1,710 mm, total height: 1,950 mm, overall weight: 8,400 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 520 mm, tool weight: 14,000 g, Injection molding machines directly from the manufacturer! As the manufacturer, KraussMaffei offers you our tested and versatile machines in stock: The fully electric PX series is the answer to your demands for greater flexibility combined with increasing productivity. Robust mechanics, highly precise and dynamic drive technologies, and intelligent energy management make the PX a reliable, productive, and efficient workhorse in any injection molding operation. An ergonomically optimized working height, maximum clearance under the mold, and excellent accessibility ensure maximum operator convenience. The PX series stands out due to its flexibility throughout its entire service life. TECHNICAL DATA: KM 160 / 750 PX G02 (Order 38621981) CONTROL  MC6 with 21.5" TFT color touchscreen and multi-touch function CLAMPING UNIT  Clamping force kN 1600 Tjdpfxo Afdatj Aired  Mold opening force, max kN 240  Mold opening (h x v) mm 520 x 470  Platen size (h x v) mm 710 x 660  Mold height min. - max. mm 200 – 500  Opening stroke mm 850  Max. mold opening stroke mm 450  Ejector drive Hydraulic  Ejector stroke mm 175  Ejector force forward/backward kN 33 / 16  Ejector speed forward/backward mm/s 350 / 350  Max. mold weight kg 1400 INJECTION UNIT  Screw diameter / type mm 55 / Standard  Effective L/D ratio 21.3  Injection pressure bar 1564  Injection volume cm³ 475  Shot weight at max. stroke for PS g 432  Injection speed mm/s 125  Injection flow rate cm³/s 297  Screw drive / speed 1/min 267  Plasticizing rate (standard screw)4) g/s 75.8  Nozzle clamping force kN 42 ELECTRICAL PARAMETERS  Connected load kW 42  Installed heating power kW 18  Power supply V / Hz 415 / 50 WEIGHT AND DIMENSIONS  Net weight with control cabinet t 8.4  Length x width x height m 6.1 x 1.71 x 1.95 ADDITIONAL EQUIPMENT  Increased mold opening  Hydraulic core pull 1+1 - way  Pneumatic core pull 1+1 - way  Air valves 1+1 - way  Pneumatic cascade 4 - way  Euromap interfaces E18, E67, E77  Adaptive Process Control (APC) The machine is located in our factory in Parsdorf and is available for immediate delivery. Additional options can be offered upon request. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2017, operating hours: 15,635 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 26 mm, displacement volume: 57 cm³, tie bars: 370 x 320 mm Mould height min: 150 mm Opening stroke: 270 mm Injection weight: 52 g Screw: 26 mm Injection pressure: 2200 bar Tjdpfx Aj Ad N Erjirsd Auswerferkraft: 19,6 kN

Condition: good (used), Year of construction: 2000, Arburg 420C-800-250 Clamping force: 80 tons Year of manufacture: 2000 Tjdpj Acb Tfofx Aired Screw diameter: 40 mm Injection volume: 188 cm3 Nozzle spacing: 42x42 Operating hours: 32,518

Condition: good (used), Year of construction: 2005, operating hours: 38,500 h, clamping force: 500 kN, screw diameter: 30 mm, displacement volume: 144 cm³, overall weight: 2,500 kg, Demag Ergotech 50-270 Extra Year of manufacture: 2005 Closing pressure: 50 tons Stroke: 30 mm Displacement: 144 cm³ Distance between tie bars: 35.5 x 35.5 Tedpfx Aio Aa Afwsrod

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161055, Used ENGEL injection molding machine Manufacturer: ENGEL Tjdpfj Aazd Sex Airsd Type: INSERT 330V/100 Year of manufacture: 2006 Machine No.: 161055 Weight: 9400 kg

Condition: used, Year of construction: 2000, Clamping unit 22 ton Max / Min Plate space 400 / 200 mm Screw: 22 mm Injection pressure 1732 bar Injection volume 30 ccm Shot weight: 27 g/PS Tsdpfjz Sl H Rex Airsd Weight: 950 kg

Condition: used, Year of construction: 2008, Arburg 320C 500-100 (2008) Clamping force: 500 kN (50 tonnes) Clearance between tie bars: 320 × 320 mm Max. opening stroke: 350 mm Min. mold height: 200 mm Max. platen distance: 550 mm Ejector force / stroke: 30 kN / 125 mm Tedpjz R N T Ejfx Airsd Injection unit (Injection unit – type 100) Screw diameter: 25 mm standard Max. injection pressure: 2000 bar (with 25 mm screw) Max. injection volume: 49 cm³ (with 25 mm screw) Max. shot weight (PS): approx. 45 g Nozzle contact force: 50 kN Weight and dimensions Machine weight: approx. 2,250 kg Oil capacity: approx. 165 l

Condition: ready for operation (used), Year of construction: 2006, operating hours: 30,949 h, clamping force: 800 kN, overall weight: 3,900 kg, This 3-axis Krauss Maffei 80-180 CX hydraulic injection moulding machine was manufactured in 2006. It has a machine weight of 3,900 kg and has completed over 4.6 million shots. The machine has been serviced annually by KraussMaffei and is decommissioned, making it immediately available. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 80-180 CX machine we have for sale. Contact us for further details. • Standard fully hydraulic 2-platen clamping and injection unit configuration • Maintenance: Serviced annually by KraussMaffei Tedez Rxpbepfx Airjd

Condition: used, Year of construction: 2007, Arburg 320C 500-100 (2007) Clamping unit Clamping force: 500 kN (50 tonnes) Clearance between tie bars: 320 × 320 mm Max. opening stroke: 350 mm Min. mold height: 200 mm Max. platen distance: 550 mm Ejector force / stroke: 30 kN / 125 mm Injection unit (Injection unit – type 100) Screw diameter: 25 mm standard Tjdpfx Aiez Nidgjrod Max. injection pressure: 2000 bar (with 25 mm screw) Max. injection volume: 49 cm³ (with 25 mm screw) Max. shot weight (PS): approx. 45 g Nozzle contact force: 50 kN Weight and dimensions Machine weight: approx. 2,250 kg Oil capacity: approx. 165 l

Condition: like new (used), Year of construction: 2019, clamping force: 500 kN, Equipment: documentation/manual, _ENGEL – Injection Moulding Machine Technical Data_ Serial number: 232665 Model: E‑VICTORY _Plasticising Unit 1_ • Screw diameter: 18 mm • Listed diameter options: 15 / 18 / 20 mm; 18 mm is installed • Screw stroke: 80 mm • Maximum injection volume: 20 cm³ • Screw speed: 450 rpm • Screw torque: 75 Nm • Plasticising rate, 3-zone screw: 4.2 g/s _Injection Unit 1_ • Version: Standard • Injection rate: 83.97 cm³/s • Specific injection pressure, regenerative mode: 2,400 bar _Nozzle 1_ • Nozzle stroke: 210 mm • Nozzle contact force: 40.6 kN _Material Cylinder 1_ • Screw L/D ratio: 24 • Heating zones, including nozzle: 4 • Heating power: 5.1 kW • Note: maximum available equipment _Clamping Unit_ • Clamping force: 500 kN (approximately 50 tonnes) • Opening stroke + cylinder tolerance: 408 mm • Maximum distance between platens: 600 mm • Minimum mould height: 200 mm • Platen dimensions, horizontal × vertical: 500 × 450 mm • Drop-out chute width: 400 mm • Maximum mould weight on moving platen: 300 kg • Maximum mould weight on stationary platen: 300 kg Todpez Iyldsfx Airod • Maximum total mould weight: 600 kg • Dry-cycle stroke according to Euromap 6: 150 mm • Dry-cycle time according to Euromap 6: 1.60 s Mould weight notes: 1. Mould overhang according to mounting platens. 2. Less the weight of any rotary table. _Ejector 1_ • Ejector stroke: 100 mm • Ejector force: 39.8 kN _Drive Unit_ • Oil reservoir capacity – injection unit, main tank: 135 l • Oil reservoir capacity – clamping unit, auxiliary tank: 0 l _Machine Basics_ • Total weight without oil: 4.0 tonnes • Total connected power: 65.0 kW Transcription note: the small footnotes below the plasticising section specify reference materials and test conditions. They are not fully legible in this photo.

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 Year of manufacture: 2004 Injection unit: Screw diameter: 30 mm Shot weight: 89 g Injection pressure: 2470 bar Tjdpjz Iq Iijfx Airsd Dosage volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1999, Arburg 420C 800-250 Year of construction: 1999 Injection unit: Screw diameter: 35mm Injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Tedpfx Aijz Iq Hforod Machine has produced molded parts for medical industry - clean production conditions Euromap 12 Robot interface Core pull control Hardened injection unit - bimetal Dimensions Weight: 3180 kg Length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating output: 6.5 kW Total output: 21.5 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2005, Arburg 1200T 800-150 / Vertical Injection Molding Machine with Rotary Table Year of Manufacture: 2005 Injection Unit: Screw Diameter: 25 mm Injection Weight: 45 g Injection Pressure: 2500 bar Dosing Volume: 54 cc Todpfoz Iq E Ujx Airjd Clamping Unit: Clamping Force: 80 t Tiebar Distance: 0 x 0 mm Clamping Platen Size: 1200 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control System: SELOGICA Additional Equipment: Air Valves x 6 Hydraulic Core Pullers x 6 Control System with Hot Runners Injection Unit Hardened - Bimetal Rotary Table Diameter: 1200 mm Kistler Sensor - Mold Pressure Control Machine serviced by the authorized Arburg Service Center in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92 x 1.61 x 3.78 m Drive: Pump/Motor: 22 kW Heating power: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request