Wohn-Welten-Wiesmoor

Condition: excellent (used), Year of construction: 2007, Year: 2007 Isdpfxexqdy To Ab Iea - technically efficient, ready to work - after full service - flow limitation: 0,2 -2 mm - support arms - PLC driver

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, Four-head welding machine URBAN AKS 6410-35/25, with weld bead limitation 0.2 mm with stainless steel knife, maximum welding dimension 3,500 x 2,500 mm, WINDFOWS control, parallel feed system, feed direction from left to right. Ijdpfx Asxl Ud Esb Ioa

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: SMH520 8001 ; EPA479 6395; WTS427 7007, pressure: 7 bar, input voltage: 400 V, air pressure: 7 bar, Rotox welding and cleaning line consisting of: - SMH510 8001 (year 2012) - EPA479 6395 (year 2009) - WTS427 7007 (year 2012) Line production years: 2012 / 2009 Profile system: VEKA / primarily sashes Maximum dimensions: 2,554 mm × 1,809 mm Minimum dimensions: 376 mm × 282 mm Standard equipment for window sashes Additional unit for milling French (floating) mullions Isdpfx Abjxcnkye Ija The line is available in the condition shown in the photos until December 2025; afterwards, it will be dismantled. Buyer collection required; we provide support with dismantling and preparation for transport. Commissioning is the buyer’s responsibility after purchase; pre-sale testing at the seller’s premises is possible. Machine computer counter readings: - Welder: 226,161 - Corner cleaner: 1,370,049

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: SMK506 8091 ; EPA479 6489; WTS427, pressure: 7 bar, input voltage: 400 V, air pressure: 7 bar, Rotox welding and cleaning line consisting of: SMK506 8091 (year 2009) EPA479 6289 (year 2012) WTS427 Line production year: 2009 / 2012 Profile system: VEKA / mainly window sashes Max. dimensions: 2600 mm × 1836 mm Min. dimensions: 411 mm × 483 mm Standard equipment for window sashes Additional unit for milling the French (flying) mullion The line is available in the condition shown in the photos until December 2025; afterwards it will be dismantled. Isdpfsxcng Uex Ab Ioa Buyer pickup required; we provide assistance with dismantling and preparation for transport. Commissioning after purchase is on the buyer’s side; prior testing at the seller’s facility is possible. Counter readings from the machine computer: Welder: 855,272 Cleaner: 4,871,927

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: SMK506 8006, Welding and Cleaning Line Rotox consisting of: SMK506 8006 EPA479 6289 WTK Year of production: 2007 Profile system: VEKA / mainly frames Max. dimensions: 3300 mm x 3000 mm Ijdpfx Aexclmxsb Ioa Min. dimensions: 420 mm x 320 mm Standard equipment for window frames + drilling head for Winkhaus hinges Additional unit for cleaning rounded frames The line is available in the condition shown in the photos until December 2025; afterwards it will be dismantled. The machine must be collected by the buyer. Assistance with dismantling and preparation for transport will be provided. Commissioning of the machine after purchase is the responsibility of the buyer; prior testing at the seller’s facility is possible. Counters from the machine computer: Welder: 348,928 (backup performed – the actual total is approx. 1,500,000 cycles) Cleaner: 6,214,838

Condition: excellent (used), Year of construction: 2000, Welding and cleaning line GRAF, year 2010 The direction of work from left to right Welder four-head SL4Q, max. welding dimension 2800 x 3200 mm, 0.2 mm flash, gasket formates Cooling station WPCNC4 4-axis cleaner with a turning station, equipped with knives for cleaning flat surfaces with a groove and smooth The line was servised in the end of 2022 y. with part replacement for over 10000 Euro (total cost of service). It is in very good condition. Ijdpfswrpwiex Ab Isa Currently is working.

Condition: excellent (used), functionality: fully functional, 2 - Urban AKS 1200 head welding machine Ijdpfx Aov Rmm Tjb Ioa - Welding length max. 2500 mm - Weld bead limit: 2 mm - Burn-off: 6 mm - Set of support arms

Condition: good (used), Year of construction: 2015, For sale used EMMEGI sealing and cleaning line equipped with FUSION 4H sealing machine and Trimmer 4A four-axis cleaning machine. The machine is in working order. Iodpfxsvdahke Ab Iea

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 100 GOLD PLUS DÖRT KÖŞE KAYNAK MAKİNESİ, - Designed for joining four corners of PVC profile corners by welding them at the same time. - It is used to weld four corners of PVC profiles at the same time at an angle of 90 degrees. - 0.2 mm welding possibility for all profile types Ijdpfxercy Tro Ab Iea - Quick mold change system that prevents wasted time - High speed and precision welding thanks to axes controlled by servo motors and planetary gearboxes - With the PID system, heating degree and time parameters are adjusted independently of each other - Single corner welding capability - U (door without threshold) boiling system - 10.1" touch control panel - Boiling, cooling times and temperature settings are digitally adjusted according to the profile type - The Teflon surface can be changed quickly thanks to the roll-shaped Teflon PROFILE ; - Max. weldable profile height 200 mm - Weldable Min. Profile Height 200 mm - Weldable Frame Minimum Width and length 410*495 mm, 520*520 mm (Gasket Printed) - Working angle range 90 degrees PRECISE MOVEMENT WITH SERVO MOTOR AND PLANETARY GEARBOX - Highly precise and error-free operation with axes controlled by high-speed and precise servo motors AND gearbox compatibility OPTION - Gasket pressing system

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 100 ÇİFT KÖŞE KAYNAK MAKİNESİ, - Allows 0.2 mm bristle welding of white and colored profiles. - Complies with CE standards. - Simplified machine management panel saves time. Provides maximum welding strength. - Possibility of both normal and 0.2 mm welding for coated profiles - The movable right head is fixed with a push button. - The maximum length of the welded profiling is 3180 mm. - The minimum length of the welded profile is 340 mm. - Maximum height of welded profile 190 mm Iodpfeq U Sx Eex Ab Ija - Minimum height of welded profile 40 mm - Time saving thanks to easy mold change system. - PLC control system is available. - Heat temperature, welding time and pressure can be adjusted for different profile types. - Heating unit has thermostatic control system Ckdvjrcspu - The degree of the heating plate can be easily changed on the digital display. - Power supply protects the system against sudden voltage changes - 1 set of welding molds are supplied free of charge with the machine.