Skookum Technology

Condition: used, Connecting rod / bar frame strut / connecting rod as a spare part for a Wurster & Dietz GXV 71 or EWD bar frame. Technical data: - Overall length: approx. 3,270 mm Hfedpszrx Etofx Adwok - D1: 190 mm - D2: 150 mm - Material thickness: 50 mm - Centre-to-centre distance: approx. 3,020 mm

Condition: used, Bruks RR 700 butt end reducer Technical data: Log length: 3.0 to 6.2 meter Max log diameter: 700 mm Hjdpfx Aezrfakjdwefk Max rootflares: 180 mm radial Capacity: 2 - 7 logs/ min

Condition: excellent (used), functionality: fully functional, Complete sawing frame for EWD Esterer gate, type HDN 600 or HDS 600 with width adjustment. Hfedpfjzn Uv Hox Adwsk Includes Jansen double-yoke tensioner. Lightly used. Ideal for keeping spare parts in stock.

Year of construction: 2026, condition: new, functionality: fully functional, log sorting line with 10 pockets, 5 on each side. Hjdpfxszn Awfe Adwofk processes logs with diameters of 5-200 mm and lengths of 1.5-4.2 m. consists of: 1. accumulation conveyor, 12 m long. 2. separator. 3. receiving conveyor, 6 m long. 4. scanner conveyor, 9 m long. 5. 10 sorting pockets. total length: 28 m. the cost of electrical connection with Siemens components is not included in the equipment price; estimated at 30,000 EUR.

Condition: good (used), Year of construction: 1995, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 380 V, input current: 32 A, cutting height (max.): 900 mm, cutting width (max.): 900 mm, Equipment: documentation/manual, lighting, motor brake, This sawmill includes: 2x clamping devices 4x vertical stops 4x leveling devices with clamps 4x log lifting arms 1x pre-cutter 1x log roller with drive 1x saw blade lubrication system 1x water lubrication system 1x electric positioning control Basic cutting length: 9.0 m Log passage: approx. 90 cm Hydraulic pump: 14 liters Motor power: 11 kW Saw blade width: 100 mm The saw was used as a secondary source of income, with approximately 500 cubic meters of timber cut per year. The friction wheel drive has been replaced with a hydraulic feed system, and the hydraulic pump has also been replaced. It has a tilting cabin and a handle heater for the fingers, which is supplied with warm hydraulic oil. The cast iron rollers were replaced about two years ago, and approximately 800 cubic meters of timber have been cut with them. Two saw bed extensions are included, one 3.0 m and one 2.0 m, for a total cutting length of 14.0 m. The saw motor was re-conditioned last year. An additional 18.5 kW electric motor is included, but has not yet been installed. Approximately 15 saw blades for hardwood and softwood are included, some of which are new. The machine runs very well, all components are fully functional, and there are no leaks in the hydraulic system. The saw can be inspected while in operation. For sale due to the purchase of a new machine. Hsdjzk Exdjpfx Adwefk

Condition: used, Wood sawmill 1/26 Hfedpfxjzkh N Ss Adwek

Condition: used, Wood sawmill 2/26 Hfsdozkh N Espfx Adwjk

Condition: used, Wide selection of used spare parts in good to very good condition for EWD Esterer HDE 71. Overhang plates, adjustment gearboxes for overhang adjustment, complete feed unit, saw frame, roller shafts with sprockets, hydraulic cylinders for roller lifting, chain housing, etc. Hfedszht Hwopfx Adwsk

Year of construction: 1998, condition: ready for operation (used), A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible. Hodpfxozf Nbxo Adwjfk

Condition: used, Meassuring frame for logs and timber type Rema 9001 Hfjdpfjzd Azvjx Adwok Maximum meassuring field 700 mm

Condition: excellent (used), For sale: FINSCAN moisture meter scan moisture meter, measures dried lumber. (these pictures are just as reference, the Finscan for sale is exact same) Available for delivery July 2026 Hfjdpfszdq Nnsx Adwok Located in Finland.

Condition: excellent (used), functionality: fully functional, Robust EWD reduction gearbox for gate drive. Shaft 100 mm. Pulleys 900 x 280 and 560 x 450 mm. Pulleys attached to the shaft with tensioning elements. Used for 2 years. Suitable for all EWD / Esterer gates. Hfsdozdiq Sspfx Adwek

Year of construction: 1993, condition: ready for operation (used), Various old sawmill machines are available. 1) Costa Leonard twin-shaft saw, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Esterer WD step feeder, max. log length: 6000mm. 3) Esterer HD 30 saw frame, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Zeno drum chipper, drive power: 55kW. 5) Zimac board stacking machine, working length range: 800mm-3000mm. 6) Schicks steel chimney, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible. Hodpfx Adeyw Sv Eewsfk

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER S 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Hfedpfx Asywh Hmedwok

Year of construction: 2015, condition: used, functionality: fully functional, A used electric 4-step feed unit manufactured by Ingenjörsfirma Gösta Hedlund AB in very good condition. Hodpsyiaafjfx Adwefk

Condition: used, We offer a board stacking machine. The stacker features a separating device and a powered roller table for pre-made packaging. More than half the width is in like-new condition, as only 120 cm wide boards have been stacked. Hfsdpfsyh U I Iox Adwek Machine width: 4.30 m Machine length: 7.50 m The entire system corresponds to the foto

Condition: used, Chip screen Hjdpfx Adsyhn Dxswofk Year of manufacture: 1996 Manufacturer: Konewood/Andritz Model: CS600 Screen capacity: 400-675 m3/h Weight around: 10 tons

Condition: new, 2 new, two-part gang saw bottom rollers, 250 mm diameter, bore 105 mm, 685 mm long Hjdpfxsyctwto Adwofk

Condition: excellent (used), HHydraulic drive variator with 3.0 kW motor, 1450 rpm, with reduction gear for speed reduction, electric adjustment via worm gear motor, output speed 0 to 25 rpm, output torque 1200 Nm at 14 rpm or approx. 3 kW at 14 to 25 rpm Hfsdpfxjx U Tfps Adwek

Condition: ready for operation (used), Metaldetector with electric -operating cabinet, inner diam. 1000 mm Hfedpfx Aox Agttodwok

Condition: excellent (used), Year of construction: 2013, Chipper for producing cellulose or fuel chips manufactured by Heinola Finland. Drum diameter 900 mm Inlet width 700 mm Capacity up to 110 m3 per hour with max motor power Hfedpfjxxql Esx Adwsk Suitable motor powers: 70 to 160 kW

Condition: excellent (used), functionality: fully functional, 2 pieces of gate uprights, heavy-duty design, for Esterer Gatter HDE or SS 71, with cover. Hfjdpoxw Uf Tjfx Adwjk

Condition: excellent (used), functionality: fully functional, Complete saw frame for Esterer Gatter HDE or SS 71. Hfjdpfx Aoxw Ubnjdwok

Condition: excellent (used), functionality: fully functional, Schorch electric motor 75 kW - 735 rpm. For direct frame saw drive. With reinforced bearings. Equipped with a 400 mm diameter pulley. Hfsdjxvpqbspfx Adwsk

Year of construction: 2021, condition: excellent (used), Scanner Finnos X-ray Manufacturer: Finnos Year of purchase - 2021 3D, laser and X-ray technology Including Jack-Steel measuring conveyor (2021) Hfsdpfxsxmk I Ae Adwok EROP ergonomic solution for sorters(sorting chair etc.) was in operation for less than 2 years