M+L Werkzeugmaschinen GmbH

Condition: used, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Hyundai lathe Nksdpfxsydp E Nj Aa Dot 3 axes X, Z, C Type HIT 30M Siemens CNC With driven tools

Condition: used, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Hyundai lathe, 2 axes Type HIT 18S Siemens CNC Nsdpfx Aaeydp Dre Dokt

Condition: good (used), Year of construction: 2006, Doosan Puma 280 CNC Slant Bed Lathe With Fanuc Series 21i-TB Control 3 Jaw Power Chuck. Swing Over Bed Ø630mm. Swing Over Saddle Ø500mm. Recommended Turning Ø420mm. Maximum Turning Ø420mm. Maximum Turning Length 658mm. Maximum Bar Capacity Ø76mm. Axis Travel 'X'=242mm, 'Z'=680mm. Rapid Traverse 'X'=20m/min, 'Z'=24m/min. Maximum Spindle Speed 3,500rpm (23kW Motor). 10 Station Turret. turning Tool Shank 25 x 25mm, Boring Bar Ø50mm. Tailstock Quill Taper MT5, Quill Ø100mm, Quill Travel 100mm. S/No.PM2800047 (2006/10). Nkjdpfsydmfmjx Aa Djt With Tool Setting Arm, Parts Catcher, Tailstock & Foot Switches. Weight 4,700kg.

Condition: good (used), Year of construction: 2005, turning length: 450 mm, travel distance X-axis: 135 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 450 mm, C-Axis rapid traverve 400 Min Turret indecing time 0,2 sec for 1 station Heavy duty cutting (depth cut 6mm) 162.7 mL/Min LNS Bar feeder new 2017 Large package tooling driven / live tools 8 axis controlled with 2 spindles and turrets Max. turning Ø: 250mm X-Axis: 135mm Y-Axis: 40+40 = 80mm Nksdpfxjydcvzj Aa Dst Z-Axis: 450mm B Axis: 510° Spindle bore: 49mm Speedrange: 6000Rpm Spindle power: 30kW Subspindle speeds: 6000Rpm Subspindle bore: 49mm ATC / revolver: 12 Speed live tools: 6000Rpm Positions lower revolver:12 Speed live tools: 6000Rpm Length: 2800mm Width: 2000mm Height: 2000mm Weight: 5000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2017, operating hours: 10,963 h, functionality: fully functional, machine/vehicle number: ML0335-000100, turning diameter over cross slide: 400 mm, turning length: 550 mm, turning diameter: 350 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 560 mm, spindle motor power: 12,600 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, total height: 1,693 mm, total length: 2,570 mm, total width: 1,595 mm, workpiece weight (max.): 300 kg, overall weight: 3,400 kg, bar passage: 67 mm, Equipment: documentation/manual, rotational speed infinitely variable, very stable roller-guided 2-axis CNC lathe with tailstock, suitable for both series production and single-part machining; Siemens 828 D control; interface for bar machining, parts catcher and ejector for automated processing; tailstock; chip conveyor; various tool holders; tool measuring arm. Njdpsydbqqofx Aa Dekt

Condition: excellent (used), Year of construction: 2013, Control Siemens Sinumerik 840D Max. turning diameter: 280 mm Max. bar capacity main spindle: 61 mm Turning length: 490 mm Spindle speed main/sub spindle: 4700 / 6000 rpm 12-position turret with driven tools C-axis Y-axis Parts catcher Nkjdpfxsyc Hzre Aa Dot Workpiece ejector Chip conveyor Various tool holders

Condition: used, Year of construction: 2005, turning diameter 290 mm Nsdpfxjyb S Ihj Aa Dekt turning length 300 mm control Heidenhain greates pass round over bed 380 mm total power requirement --- kW weight of the machine ca. --- t dimensions of the machine ca. --- m

Condition: used, Year of construction: 1986, functionality: limited functionality, spindle bore: 43 mm, spindle speed (max.): 6,000 rpm, type of input current: three-phase, overall weight: 2,300 kg, swing diameter over bed slide: 340 mm, bar passage: 40 mm, swing diameter over top slide: 158 mm, bar diameter (max.): 43 mm, Equipment: documentation/manual, For sale is a CNC lathe EMCOturn 340 TC equipped with a Siemens Sinumerik 810 T control system. On-site inspection is expressly encouraged. We would be happy to demonstrate the machine in operation for you. The machine comes from ongoing production and is fully functional except for the tailstock (which is jammed). We have three main types of tool holders for the EMCO, all following the VDI 30 system: - Boring bar holders in the following sizes: 2x10mm, 1x16mm, 1x20mm, 3x25mm, 1x32mm Nkedpfx Aaoybb Eco Djt - Turning tool holders 20mm x 20mm: 5 pcs - Collet holders: 8 pcs with various collets supplied Electrical specifications: Voltage: 3×380/220 V Frequency: 50 Hz Current: 35 A Serial number: R3086 06 014 S If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2024, functionality: fully functional, For sale is a new machine for cutting hoses made of plastic or textile (Cutex TW-69TUB). - Cutex TW-69TUB base unit - Hardened upper and lower blades - Cutting length adjustable in 0.1 mm increments - Transport via conveyor belt - Conveyor belt height and contact pressure adjustable - Mounted on a frame Optional (for an additional charge): A pre-feed device is available, which pulls the hose off the reel and feeds it to the cutting machine without tension. Also available as an option is a second set of blades (upper and lower blades). Nksdpfxjyay Duj Aa Dot The machine is new and has never been used in production. It can be inspected and tested on site.

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: SINUMERIK 828D, _____ Description: Year of manuf. : 2022 Control : Siemens SINUMERIK 828D Turning diam. : 288 mm Turning length : 243 mm Work area max. turning diameter:288mm max. machining length:243mm X-axis:175mm Z-axis:350mm Main spindle Chuck diameter:210mm Max. bar diameter:67mm Spindle bore diameter:76mm Drive power:10.5/20 kW max. torque:213 NM max. speed:4,500 rpm Tailstock Quill diameter:65mm Quill stroke:80mm Axial force:4,312 N Center point adapter:MT4 Nkedpfx Aaeyavz Ao Djt Tool turret Number of tool stations:12 Tool holder:BMT45 Powered tools:Yes Max. speed:5,000 rpm

Condition: used, Year of construction: 1996, turning diameter 250 mm weight of the machine ca. 8 t PHILIPS CNC control X-axis: 295 mm / Y-axis: 295 mm Center distance: 1000 mm Max. diameter on the bed: Ø 310 mm Max. diameter when turning: Ø 250 mm. Maximum turning speed: 4500 rpm. Spindle bore diameter: Ø 78 mm Turret with 8 tools Weight: approx. 8 tons Nkodpsyan R Aofx Aa Dst

Condition: used, Year of construction: 2014, Feed diameter max. 250 / 315 mm Circular diameter 350 mm Workpiece diameter max. 250 mm Travel: X-axis: 745 mm Z-axis: 300 mm Nksdpsyan Rpofx Aa Dst Loading times: Loading times (depending on workpiece) 4–6 seconds Main spindle: Spindle flange DIN 5502: 6 Spindle bearing, front through. Max. 110 mm Speed max. 5500 rpm Disc turret: Number of tool holders: 12 Shaft diameter: 40 mm Powered tools Maximum power: 8.5 kW Speed: max. 6000 rpm Turret swivel time: 0.3 s Control: Bosch Rexroth MTX

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mm Turning length : 650 mm In General: Year of construction:2007 Control:Siemens 840 D Bar capacity:65 mm Turning diameter:350 mm Turning length:650 mm Main spindle: Nksdeyamflopfx Aa Djt Technology:Motor spindle Speed:5,000 rpm Power max.:35 kW Torque max.:370 Nm C-axis:0.001 Bar capacity:65 mm Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:26 kW Torque:290 Nm C-axis:0.001 Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Partial hollow clamping cylinder Z-axis:670 mm X-axis:175 mm Tool carrier i (X/Y/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:300 Y-axis:80 mm ( +/- 40 mm) Z-axis:650 mm Tool carrier II (X/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:180 Z-axis:650 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system Measuring systems:Direct in all X-axes (glass scales) Bar loader:IRCO Breuning Part removal:Finished part gripper + indexing belt Emulsion mist separator:Mechanical Set-up mode:Electronic handwheel

Condition: good (used), Year of construction: 2002, turning length: 200 mm, turning diameter: 300 mm, spindle bore: 40 mm, spindle speed (max.): 4,000 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, The Okuma LVT300M CNC lathe shown in the picture is for sale. The machine is currently in production! Driven tool, C-axis machine. It can be viewed in operation. Main parameters: -Control: OSP100 -Hydraulic chuck -Hydraulic saddle -Maximum swing: 300 mm -Maximum length: 200 mm Nsdpfx Aajx Uzyus Djkt -Spindle diameter: 40 mm -Turret: 12 positions

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 246, turning length: 900 mm, travel distance X-axis: 280 mm, travel distance Z-axis: 400 mm, total height: 2,700 mm, total length: 5,000 mm, total width: 2,000 mm, overall weight: 7,000 kg, controller manufacturer: TRAUB, controller model: SYSTEM TX 8H, number of slots in tool magazine: 12, TRAUB TNA 400 CNC Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Connected load: 36 kW - Rated current: 70 A Nkjdpsx Tzx Ijfx Aa Djt - Includes a tailstock and a HAINBUCH chuck, also equipped with a chip conveyor, TOOL EYE, and an additional chuck by FORKHARDT, diameter: 250 mm Note: The item must be picked up, bindingly, between 18th and 26th February 2026 on a date to be arranged. FCA D-78087 Mönchweiler - loaded onto truck

Condition: used, Year of construction: 2000, control Fanuc 21i turning length 600 mm swing diameter 280 mm turning diameter over bed 520 mm turning dia. over slide 255 mm centre distance 1.300 mm x-axis 160 mm z-axis 600 mm Nodpfxox Ti Dlj Aa Djkt spindle bore 65 mm number of tool places 10 Pos. spindle tunring speed 3.500 U/min spindle drive 12 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Nakamura Tome WT 250 CNC Lathe (2008) Manufacturer: Nakamura Tome Model: WT 250 CNC Lathe Year of manufacture: 2008 Condition: used, good, and currently under power in production Control: Fanuc 18i 4 axes: X, Y, C, Y 2x spindle 2x turret (equipped) Turning diameter: 250 mm Turning length: 555 mm Main spindle speeds: 50–4,500 rpm Nedpfx Aajx Tir No Dskt Sub spindle speeds: 5,000 rpm Turrets 1+2: 24 stations, each with 12 driven positions Gantry loader GR 203 Band filter system Chip conveyor Documentation Tools Accessories

Condition: used, Year of construction: 2014, Technical details: turning diameter: 256 mm turning length: 455 mm Nksdjx Th Amepfx Aa Dst swing diameter over slide rest: 260 mm travel -x axis: 198 mm travel -z axis: 508 mm turning speed range - main spindle: 4800 1/min power capacity - main spindel: 18 / 11 kW C-Axis: 0,01 ° turret (x-stations): 12 x VDI 30 Pos rapid power traverse in X-and Z direction: 19 / 24 m/min Number of driven tools: 12 Pos tool taper: VDI 30 Spindle speed driven tools: 5000 min -1 spindle hollow: 52 mm power capacity - driven tools: 4,4 kW total power requirement: 28 kVA weight of the machine ca.: 4.500 kg dimensions of the machine ca.: 2,9 x 2,3 x 2,2 m CNC lathe with tailstock, chipconveyor, hollow clamping cylinder, 3-jaw-chuck AUTO STRONG N 208, dia. 200mm, DXF, tooleye, Ultipockets, Synchronous threading, 3D Graphic, barloader ILS-BREUNING MUK 7012-III, Bj. 2017, accessories: incl. 2 pcs. live tools, incl. 34 pcs standard toolholders, hour meter: approx. 9.500h "machine on", approx. 2.000h "spindle on", approx. 300h "live tools on" *

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, Haas SL-20THE with live tooling Machine is inspected Year of manufacture: 2005 Swing diameter over bed: 762 mm Turning specifications: - Turning length: 508.0 mm - Turning diameter: 261.6 mm - Diameter over bed: 584.2 mm - Diameter over cross slide: 241.3 mm - Distance between centers: 609.6 mm Axis travel: - X-axis travel: 214.6 mm - Z-axis travel: 508.0 mm Spindle details: - Spindle bore: 76.2 mm - Spindle speed: 4000 RPM - Spindle motor power: 14.9 kW Tooling: - Number of turrets: 1 Nkodpjx Rpazofx Aa Dst - Number of tools on turret: 10 - Number of live tools: 10 Measuring arm Chip conveyor 3-jaw power chuck Dimensions: - Length: 3149.6 mm - Width: 1574.8 mm - Height: 1828.8 mm - Weight: 4083.5 kg The machine can be inspected by appointment in Hanover. Buyer responsible for transport. Technical specifications, accessories, and description of the machine are non-binding.

Condition: used, Year of construction: 2005, Turning length 900 mm Distance between spindles 580 mm Max turning dia. 250 mm Spindle speeds (main spindle) 7000 rpm Spindle speeds (Sub spindle) 7000 rpm Spindle speeds on live tools 2000 rpm Spindle bore 65 mm Y-axis 670 mm Nkedpfx Aaox N A Nge Dst Upper turret w/12 stations Lower turret w/12 stations Live tooling on both turrets - in all stations Controlled tail stock Automatic workpiece extraction Control: Siemens Sinumeric 840 D Equipped with: Hainbuch collet chuck on both spindles Chip conveyor Irco Profimat magazine bar feeder

Condition: ready for operation (used), CNC lathe, Haas TL-1HE, year 2008 Nksdjx Nr D Tspfx Aa Djt

Condition: ready for operation (used), CNC lathe, Haas TL-2HE, year 2008 Nksdpfx Asx Nr D Hoa Dst

Condition: good (used), Year of construction: 2013, functionality: fully functional, spindle speed (min.): 4,000 rpm, travel distance Z-axis: 500 mm, Year of manufacture: 2012 Chuck diameter: 10" Number of axes: 2 Turning length: 500 mm Nodpfex Nmm Ajx Aa Dokt Swing diameter: 400 mm Spindle speed (RPM): 4,000 Processable materials: Steel, Aluminium, Titanium, graphite, Copper, Invar, Composite, Delrin, Peek

Condition: ready for operation (used), Mori Seiki CL-15 CNC lathe, year 1994 Nsdpfx Aajx I D Sgj Djkt

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 505, spindle speed (max.): 10,000 rpm, spindle speed (min.): 200 rpm, total height: 2,400 mm, total length: 8,000 mm, total width: 1,500 mm, overall weight: 6,000 kg, controller manufacturer: FANUC, controller model: SERIES 31 i-MODEL A, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI HS 207 CNC Automatic Lathe - Operating voltage: 380 V Nsdsx Hwlwjpfx Aa Djkt - Frequency: 50 Hz - Rated current: 41 A - Rated power: 14.3 kVA - Bar clamping diameter: from 3 to 20 mm - Max. machining length: 210 mm (synchronously driven guide bushing) - Static guide bushing: 250 mm - Rotating guide bushing: 80 mm - Without guide bushing: 45 mm - Max. drilling diameter: 10 mm - Max. tapping diameter: M10 - Diameter of deep holes: 8 mm - Max. counter spindle clamping diameter: 20 mm - Max. counter spindle drilling diameter: 8 mm - Max. counter spindle tapping diameter: M6 - Max. tool spindle drilling diameter: 6 mm (front/rear tool holder, B-axis tool spindle) - Max. tool spindle tapping diameter: M5 (front/rear tool holder, B-axis tool spindle) - Max. tool spindle slot milling cutter diameter: 30 mm - Tool spindle speed: 200–8000 rpm - Total number of tools (standard specification): 35 - Tool dimensions: 12 x 12 x 100 mm - Rapid traverse: 32 m/min - Rapid traverse in X1 and Y1: 24 m/min, in Y2: 15 m/min - Controllable axes: 7 The machine is equipped with a bar feeder from manufacturer FMB, type: TURBO 3-36, as well as a chip conveyor and coolant system. Note: This item must be picked up definitively between 04 and 12 March 2026 on a date to be mutually agreed. FCA D-75181 Pforzheim – loaded onto truck