Möbeldesign Dittberner

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 974/1-810, functionality: fully functional, operating hours: 1,483 h, workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, controller model: Edge Control 19 mit 18,5" Touchscreen, The machine was last serviced in February 2026! The machine has the following configuration: Grooving cutter head 1802 Motor power: 2 x 2.0 kW 1. Cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation for grooving cutter head 2. Cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation for grooving cutter head Edge feeder 1901 SYNCHRO (fully automatic) Glue application station Glu Jet GJ301 (automatic) Power: 2.3 kW, 50 Hz Cartridges: Storage compartment for 14 cartridges (1.4 kg) GluJet collection container Pressure unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic Multi-function cutter head 1826 MOT4 Motor power: 2 x 0.65 kW Air Stream System cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, left-hand rotation Air Stream System cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, right-hand rotation Profile cutter head 1833 MOT4 1. Cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, left-hand rotation with CM technology 2. Cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, right-hand rotation with CM technology Ksdpfxjy Tw Edj Ahasdl Scraping blade unit 1929 MOT4 Carbide indexable inserts for scraping blade holder R = 2 mm (2 pcs. required) Surface scraping blade FK 701 Smoothing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Spray device 1856 TECHNICAL DETAILS Feed speed: 10 - 18 m/min Workpiece length min: 160 mm Workpiece width min: 60 mm Workpiece thickness: 8 - 60 mm Edge height max.: 65 mm Edge thickness roll material: 0.4 - 3 mm Edge thickness strip material max.: 8 mm MACHINE DETAILS Control: Edge Control 19 with 18.5" touchscreen Infeed guide length: 1,350 mm Electrical system for stepless feed: 400 V / 50 Hz Feed electric motor: 2.2 kW Operating hours: 1,483 h EQUIPMENT Motorized pressure bridge adjustment Nesting - touch probe vertical top & bottom Edition 18 package ECO MODE energy-saving mode ITronic system

Condition: good (used), Year of construction: 2014, functionality: fully functional, Single-sided edge banding machine in right-hand configuration for applying EVA or PUR hot melt adhesives to workpieces with complete finishing. Machine type KDF 660 Feed rate 8 - 18 m/min. Overall machine length 6,260 mm Workpiece thickness 8 - 60 mm Edge material, roll 0.4 - 3 mm Edge material, strip 0.4 - 12 mm Hood interior lighting, 3 lamps Motorized height adjustment of the pressure roller Pressure roller equipped with PU rollers for sensitive workpieces Equipment configuration: Infeed fence, positioning via program Extension of infeed fence 300 mm Automatic edge table with feeding of the edge material up to the trimming unit for edge thicknesses up to 3 mm Application of release agent on top and bottom Joint milling unit with 2 pneumatically controlled motors, 2.2 kW each Gluing unit QA45, usable for EVA and PUR adhesives, automatic cleaning function via program, with collection tray QUICKMELT pre-melting unit for supplying the gluing unit with EVA adhesive Pressure zone with 1 main pressure roller and 3 follower rollers, adjustment via program Trimming unit with 2 motors, 0.35 kW each, pneumatic adjustment from bevel trimming to straight-edge trimming via program, 2-point adjustment for flush trimming or trimming with overhang Working speed at 0.4 - 3 mm edge thickness 18 m/min. At 3 - 12 mm edge thickness 14 m/min. Pre-milling unit with 2 motors, 0.55 kW each, 2-point adjustment for vertical contact rollers, with axis adjustment of the side contact Multi-roller contact Multi-function profiling milling unit with 2 motors, 0.4 kW each Maximum feed rate 14 m/min. Workpiece thickness 12 - 60 mm Edge thickness max. 3 mm Multi-profile trimming unit with automatic changeover bevel / radii Edge thickness max. 3 mm With multi-roller contact Straight trimming unit Cleaning agent spray unit Buffing unit with 2 motors, 0.18 kW each Additional equipment: Interface to Ligmatech return system Control system: Kjdjy Twu Sepfx Ahaedl POWER CONTROL PC 20+ Optional, we offer: FE-MA-TECH PUR ADVANCED 2kg LIGHT melting system for automatic filling of the gluing unit with PUR hot melt adhesive.

Condition: good (used), Hebrock top 3003f edger Well-equipped, can be inspected before purchase. PRE-MILLING cutters, Glue application via roller, Pneumatic pre-trimmer, Pressure rollers, Final trimming saw, Top and bottom milling unit, R1 – R2 pneumatically adjustable, Corner rounding unit, Kjdpfjy Tv Sijx Ahaodl Flat edge trimmer, Max. veneer thickness in roll: 3 mm, Max. height: 60 mm. Machine in good condition, ready for operation.

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 - 3 mm (6 mm) Control panel with selector switches for adjusting the units Fully automatic edge magazine for roll and strip material Gluing station: cartridges + PU adhesive Workpiece height 6-55 mm Pressure unit, pneumatically controlled Cutting unit for roll and strip material up to 3 mm (6 mm) edge thickness with adjustment for 0-10° bevel of the cutting saw Milling unit, flush milling, radius milling, chamfer milling - 15° Scraping blade unit for chamfers and radii Kdsdpfxoy Tuyls Ahael Surface scraping blade unit - finishing Machine has been INSPECTED and is in TOP CONDITION, coming from a well-maintained workshop Machine is connected in the showroom and ready for demonstration available from warehouse in Lieboch

Condition: used, Year of construction: 2007, with edge gluing: workpiece thickness: 8 - 50 mm, edge thickness: 0.4 - 3 mm, fixed lengths: max. 3 x 45 mm, feed rate: 11 m/min, connection value: 10.5 kW, compressed air: 6 bar, weight: approx. 1250 kg, machine length: 3920 mm. Storage location: Supplier. Kdedpfx Ahoy Tpz Djajl

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, operating hours: 7,610 h, input voltage: 400 V, input current: 10 A, total height: 1,650 mm, total length: 4,400 mm, total width: 1,000 mm, TECHNICAL DETAILS Overall height: 1,650 mm Overall length: 4,400 mm Overall width: 1,000 mm Color: Gray Operating hours: 7,610 MACHINE DETAILS Weight: 2,500 kg Year of manufacture: 2018 Documentation available: No CE marking present: Yes CE certificate available: No Serial number: Itsbn Dztwjy Ewv Tj Tsg Voltage: 400 V Power consumption: 10.3 A Fuse: 16 A Transport dimensions: 4,400 mm x 1,000 mm x 1,650 mm (l x w x h) Transport weight: 2,500 kg Transport packages: 1 EQUIPMENT Pre-milling unit Gluing unit Pressure rollers Kdodpsy Tnuvsfx Ahael Cutting unit Rough milling unit Radius pulling unit Corner rounding unit Surface pulling unit Brushing unit

Condition: good (used), Year of construction: 2014, Description: see machine photos. Kdedey Tm Nfspfx Ahajl

Condition: good (used), Year of construction: 2005, - Machine: including Geldmeier return unit, type PRFU 1200 LU; year of manufacture: 10/2015 Kdedpsy Tm Hwofx Ahasl - Description: see photos.

Condition: used, Year of construction: 2016, functionality: fully functional, We present a fully automatic EDGEBANDING LINE for sale! The line can be inspected in production at any time and is available immediately! HOMAG SINGLE-SIDED EDGE BANDING MACHINE PROFI KAL330/9/A3/WZ, year 2013 HOMAG FEEDING TABLE FLEXLINE PROFI TBL100/20/30/F, year 2013 HOMAG SINGLE-SIDED EDGE BANDING MACHINE PROFI KAL370/8/A3/WZ, year 2016 HOMAG DOUBLE ANGULAR TRANSFER CROSSWISE POWER TWL410/25/LQ, year 2016 PROFI KAL330 - Free Space Jointing Trimming Unit - Gluing Part A3 Basic - Free Space Processing Units - Finishing Unit FA11 Workpiece and edge parameters: - Workpiece width without edge min: in case of workpiece 60 mm* Thickness 12-22 mm in case of workpiece Thickness 23-60 mm 100 mm* *depends on the workpiece length. - Workpiece overhang 30 mm - Workpiece thickness 12-60 mm - Edge height max. = workpiece + 4 mm Thickness - Edging material on coil 0,3-3 mm - Edging mat. cross section max. (PVC 135 mm², Veneer 100 mm²) - Coil diameter 830 mm PROFI TBL100/20/30/F Fixed stop side on the left - incl. transport rollers - roller diameter 54 mm - roller distance approx. 60 mm - incl. lateral conveyor belt - electro pneumatically controlled crosswise fence - adjustable infeed fence, manually via counter - incl. kit for small parts Kedpfx Ajy Thlzehasdl - incl. integrated air cushion table Workpiece parameters: - Panel length: min. 240 mm/ max. 2500 mm - Panel width: min. 120 mm/ max. (TBL../20/30) 3000 mm PROFI KAL370 - Free space Jointing Trimming unit - Gluing part A3 basic - Free space processing units - Finishing unit FA21 Workpiece and edge parameters: Workpiece width without edge min: in case of workpiece 60 mm* (thickness 12-22 mm) in case of workpiece 100 mm* (thickness 23-60 m) *depends on the workpiece length - Workpiece overhang 30 mm - Workpiece thickness 12-60 mm - Edge height max. = workpiece + 4 mm thickness - Edging material on coil 0,3-3 mm - Edging mat.cross section max. (PVC 135 mm², Veneer 100 mm²) - Coil diameter max. ¦ 830 mm POWER TWL410/25/LQ - Fixed stop side infeed: left, outfeed: left - Roller diameter 64 mm - Roller distance 110 mm - Infeed roller track with belt conveyor and cross transport - Cross conveyor belt controlled - Outfeed roller track - Cross conveyor belt controlled - Stop fence electro pneumatically controlled - Transport belt lateral - Modification of panel overhang manually adjustable Workpiece parameters: - Panel length min. 240 mm/ max. (TDL../25/..) 2500 mm - Panel width min. 240 mm - Panel thickness min. 8 mm/ max. 60 mm - Panel weight max. 80 kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, Ott edge banding machine, model EUROMATIC-FÜ - Year of manufacture: 2003 - BL-F: automatic infeed guide rail, heated - FÜ: edge joining unit - KM: automatic edge magazine - RM-V: automatic roller magazine - Glue application: 0.4 - 15 mm - Edge preheating - K16: double unit, swiveling by 15°, saw blades 140x3.2x16 - HF 10.1: flush trimming unit, top and bottom, incl. tooling - HFF: chamfer milling unit, top and bottom, incl. tooling - HFR: rounding milling unit, top and bottom, incl. tooling - AR 4: 4-motor corner copying unit, incl. tooling - ZK: profile scraping unit, incl. tooling Kdodsy S Rz Aspfx Ahaol - KE-G: edge finishing device - ZKF: surface scraping unit, incl. tooling The machine can currently still be inspected and tested at the customer's site.

Condition: good (used), Year of construction: 2015, functionality: unexamined, Edge banding machine HOLZ-HER Sprint 1329 Premium - Year of manufacture: 2015 - Immediately available - Includes air cushion table - Cartridge system & granulate - Touchscreen - Jointing - Gluing: GlueJet system Kjdpfey S Habex Ahaedl - Trimming (2 motors) - Multifunction milling - Corner copying (2 motors) - Radius and surface scraping blades - Buffing

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Used BIESSE STREAM A 6.0 Kdodpfxsy S E Nnj Ahajl - Year of manufacture: 2018 - AirForce system (zero-gap) - Availability: August 2026 - Smart Touch - Edge milling unit - Gluing unit - Crosscut unit (2-motor) - Flush trimming unit - Fine milling unit - Profile milling unit (2-motor) - Pull knives (profile & flat) - Scraper unit - Separate glue tank - Up to 25 m/min - Machine length approx. 7500 mm - Weight 3800 kg - More pictures and a video are available, please inquire.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 0-200-24-6287, functionality: fully functional, input voltage: 400 V, input current: 56 A, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 78/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2001 SPEZIFICATION & EQUIPMENT: Kjdoy Su Itopfx Ahajdl Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x4kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN21, with NC-axis positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: good (used), Year of construction: 2007, An edge banding machine is available for sale. Year of manufacture: 2007. Kjdpfx Ahjy Srttsaodl

Condition: good (used), Year of construction: 2008, machine/vehicle number: 082429, functionality: fully functional, overall weight: 1,260 kg, year of last overhaul: 2025, Equipment: CE marking, SCM Olimpic K500 – Edge Bander – Year 2008 Kdjdjy Sph Ispfx Ahasl For sale: SCM Olimpic K500 edge bander, year 2008. Reliable and robust machine, ideal for joinery workshops and industrial production. ✔️ Fully functional ✔️ Ready for use, requires no work ✔️ Always carefully maintained ✔️ Excellent overall condition The machine will be available from June. Perfect solution for those seeking a professional edge bander that is immediately operational. 📍 Inspection and test operation available upon request. 📞 For more information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2007, About the machine: Workpiece thickness: 8 - 50 mm Edge thickness: 0.4 - 3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3150 mm Kjdpey Sphbefx Ahaodl No jointing Pre-trimming Flush cutting Radius and flush milling Radius scraper blade

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,8 / 3 Panels thickness (min/max) mm 10 / 50 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 1 x 75.186 (1 x Kw 4,5) + 2 x 08.378 (2 x Kw 4,5) adj. by N.C. Glueing Unit (Thermofusion with Laser) IMA Laser System LASERLINE (year 2025) Band Pressure zone + Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) 08.42/30/B (Kw 0,66 x 2) work speed 20 + 30 m/min (0°-25°) Spraying Unit (for anti-release liquid) Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustable for 4 profiles) 08.0587 HS/LS1 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Milling grooving unit, N.C. adjustable Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Kdodpoy Spcljfx Ahasl Buffing unit 08.614 (Kw 0.25 x 4) RIEPE (for PMMA too) OPTION:No. 1 Automatic Return System "GELDMEIER" (Sofit's Code O11043)

Condition: new, Year of construction: 2026, functionality: fully functional, /// Overview The NB7X is a high-performance automatic edge banding machine designed for handle-free cabinet door production. It switches easily between half bevel (45°) and full straight edge modes, and features twin diamond cutters, a twin glue station, and a twin tape coil magazine. Suitable for panels from 9 to 50 mm thick (straight) and 15–25 mm (half bevel), it is an excellent solution for modern, handleless furniture manufacturing. /// Key Features Bevel edge milling — Two 4 kW high-power motors at 2,800 rpm with 45° diamond forming bevel cutters for precise, crack-free milling. Pre-milling — Dual Leitz diamond cutters (2× 3.7 kW, 9,000 rpm) rework imperfections from panel saw cutting for superior edge adhesion. Twin glue system — Separate gluing units for straight and 45° bevel edges; Teflon-coated EVA glue pot (~5 L) plus optional auto glue pumping with a 25 kg basin. Pre-heating — Warms the panel edge before gluing, ideal for cold or humid environments. Tape handling — Separate tape brackets for full straight and half bevel modes, with an edge tape grooving device for cleaner folding on thicker tapes. End, rough, fine & corner trimming — Full set of trimming stations with high-speed motors and copy-tracing structures to protect hinge holes. Scraping & buffing — Flat and profile scraping removes excess glue; dual-cloth buffing delivers a polished, shiny finish. Top presser — Aluminum beam with auto height adjustment based on workpiece thickness; compact wearproof rubber rollers prevent displacement during conveying. Safety — Feeding protector, workpiece thickness detection, interval feeding detection, and emergency stop. Control — 10″ touch screen with PLC control (380V/50Hz), energy-saving standby mode, and remote switch. Available in English, Simplified Chinese, and Traditional Chinese. /// Machine Construction Kdsdpfx Ahey Sk T Ejael The heavy-duty welded steel body undergoes heat treatment, vibration aging treatment, sandblasting, and CNC finishing for long-term dimensional stability. All machines are assembled by experienced technicians following strict SOPs and delivered with a Quality Certificate signed by a QC specialist.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, Numerically adjustable infeed fence Air flotation infeed table Anti-adhesive liquid spray system Pre-milling unit with diamond cutters Edge feeder for edge banding from coil or strips Glue station for GlueJet cartridges or L-Tronic laser technology 4 pressure rollers with pneumatic pressure adjustment Kdjdpfx Ahoy R Un Deaol Edge lubricant spray system Dual-motor precision end trimming unit with pneumatic angle adjustment Top and bottom edge surplus trimming unit (straight trimming) Numerically adjustable profile edge milling unit Flat scraper Profile scraper – two profiles Cleaning liquid spray system Pneumatically activated buffing units Pneumatically activated edge buffing unit Feed speed continuously adjustable from 10 to 25 m/min Automatic lubrication of the feed chain Frame support Minimum workpiece length: 140 mm Workpiece thickness: 8–60 mm Minimum workpiece width: 60 mm Year of manufacture: 2016

Condition: ready for operation (used), Year of construction: 2019, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 150 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 18 m/min, actuation type: electric, total height: 1,468 mm, total length: 4,412 mm, total width: 1,511 mm, For sale: A Felder Format4 Tempora F600 edge banding machine in very good condition. The machine comes from a professional interior construction workshop and has always been properly maintained and carefully used. The Tempora F600 is renowned as a highly reliable industrial edge bander with a high processing speed (10/18m) and excellent finishing quality. The machine is functioning perfectly and can be put straight into operation. Specifications: Brand: Felder Model: Format4 Tempora F600 Year of manufacture: 2019 Features include: - Smartouch touchscreen control - Program settings with memory function - Anti-adhesive glue application unit - Pre-milling unit - For panels up to 60mm thick - Top and bottom radius trimming unit - Corner rounding unit - Radius scraper unit - Flat scraper unit - Glue residue cleaning unit - Buffing unit - Automatic infeed Suitable for processing: - ABS edge banding - PVC edge banding - Veneer edging - Solid wood edge strips Kjdpey R I Rfjfx Ahaedl Condition: Machine is in excellent technical and visual condition, has always been regularly serviced and cleaned in a professional workshop. Delivery: Machine can be collected as shown in the photos. Inspection: Viewing possible by appointment in Rijnsburg. Transport: To be arranged by the buyer. Available from mid-July. Asking price: € 32,490 excl. VAT.

Condition: used, Year of construction: 2014, functionality: fully functional, Technical data of the Felder G 560: Edge thickness: 0.4–5 mm (coil and strip material) Workpiece height: 8–60 mm Workpiece width: min. approx. 70 mm Feed speed: approx. 12 m/min Glue pot: interchangeable glue pot for EVA and PUR adhesives (hot-melt adhesive) Units: Jointing unit with diamond-tipped spiral cutters End trimming unit Kedpoy R Afwjfx Ahaedl Combination milling unit (flush/radius/chamfer) Surface scraper Operation: Felder Quick-Set system Weight: approx. 790 kg

Condition: used, Year of construction: 2008, Connected load: 15 kW Feed speed: 14 (11) m/min Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Roller separation: max. 3.0 x 45 / 0.8 x 65 mm Extraction diameter: 120 / 160 / 100 mm Working height: 950 mm Dimensions: 6260 x 1560 x 2300 mm Weight: approx. 3000 kg Storage location: Supplier Kdodpey Ruzqefx Ahasl

Condition: excellent (used), CATALOG NUMBER 7729 Ksdpjy Rrgdofx Ahaedl TECHNICAL DATA Equipment: - Tape holder - Glue tank (granulate) - Tape feeder - Guillotine – pre-cutting the edging - Pressure rollers 2 pcs - Min. width of processed components: 50mm - Thickness of processed components: 10-40mm - Min. internal radius: 50mm - Angled gluing with 1mm thick edging, 0-45° - Edge thickness: 0.3-3mm - Electric feed - Total power: 2kW - Compressed air pressure: 6-7 bar - Dimensions (L/W/H): 1700x1300x1550mm - Weight: 310kg ADVANTAGES – Made in Poland – Unpainted – DTR technical documentation – Very good condition – used edge banding machine Net price: PLN 6500 Net price: EUR 1550 (exchange rate: 4.2 EUR) (Prices may vary depending on larger fluctuations)

Condition: good (used), Hebrock top 2000 edge bander glue application by roller pneumatic pre-cut guillotine pressure rollers trimming saw for finishing top and bottom milling unit R1-R2 max. workpiece height: 50 mm Kodpfsy Rpicox Ahasdl max. edge thickness in roll: 3 mm feed speed: 10 m/min machine length: 310 cm The machine is well-maintained and in good condition.

Condition: used, Holz Her Perfect 1422 K + PU Heavy-duty version, for edge banding up to 20 mm thickness Fully automatic roller magazine – crosscut shear Fully automatic edge magazine for strip material Cartridge + PU gluing station Flush trimming Multifunction milling unit, flush – chamfer – radius milling with mechanical digital adjustment Soundproof enclosure CE-compliant design Kjdpfxey Rm Iis Ahaedl Machine is FUNCTIONALLY TESTED and in VERY GOOD CONDITION available ex-stock Lieboch