Schreinerei Pfob

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, working height: 900 mm, space requirement height: 1,400 mm, space requirement length: 4,050 mm, space requirement width: 1,300 mm, operating pressure: 7 bar, with PLC control system (including touchscreen) and hot-melt adhesive application to the workpiece for edge materials up to 3 mm: joining cutter (including DIA tool), up to 2 mm cutting depth (max. 1 mm for special materials such as multiplex), maintenance-free glue pot with quick-change pot preparation including glue discharge device, HF trim saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combined version), corner round milling unit, surface scraper (including pneumatic lift), robust chain feed, ball-bearing double roller upper pressure, viewing window from machine rear side, extendable workpiece support, feed rate approx. 10 m/min. Complete with quick-change set-up for corner milling unit, radius scraper (including pneumatic lift), chassis F 4 – Technical Specifications Max. edge thickness: 3 mm Min. / Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: 7 m / min Ready for operation: approx. 3.5 min Max. power consumption: ∅ approx. 7.4 kW Fodpfxox E N Nfs Addjgk Electrical connection: 400 V / 3 Ph / 50 Hz Worktable height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Extraction port: ∅ 1 x 140 mm

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 2600 kg Measurements height 2300 mm Dimensions Machine Length 6060 mm Fgsdpfxjx E Eggs Addsk This BRANDT OPTIMAT KDF 670 edgebander was manufactured in 2005. It features a comprehensive range of processing units including pre-milling, glue application, edge feeding and cutting, and polishing. Capable of handling workpiece thicknesses from 8 to 60 mm and edge bands up to 15 mm. Feed speed reaches up to 20 m/min, optimizing productivity. Consider the opportunity to buy this BRANDT OPTIMAT KDF 670 edgebander. Contact us for more information about this machine. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2025, This VITAP GIOTTO edgebander manufactured in 2025 is designed for edge banding on straight, shaped, concave, and convex panels. It features a semi-automatic contour edge bander with a Teflon-coated glue pot, adjustable glue application, and an automatic roll cutting device. Ideal for handling large workpieces with its reinforced, swiveling arm and integrated vacuum. Consider the opportunity to buy this VITAP GIOTTO edgebander. Contact us for more information about this machine. Fgjdpfxox E Ecbj Addjk Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2002, This HEBROCK AKV 3003 DK-F was manufactured in 2002. A robust edgebander with a total power of 10.5 kW, operating on 230/400 V and 50 Hz. Ideal for efficient edgebanding operations. Contact us for more information about this machine. Application Types Fsdpex E Eayofx Addsgk Edge Banding

Condition: excellent (used), Year of construction: 2023, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, Holz-Her Edge Banding Machine LUMINA 1380 Multi PUR & EVA adhesive (up to 60 mm) + NIR unit / laser edges up to 45 mm, as interchangeable station Jointing milling IntelliSet - tool correction fa.s.t. - setup in the gap iTronic - pressure and glue quantity control Fully motorized equipment for all units Multi-function milling - radius 1.3 mm (2x) & 2 mm (2x) Fjdpfxox E A Die Addsgk Spraying devices and more... The machine is currently being refurbished at the factory in Voitsberg, Austria.

Condition: good (used), Year of construction: 2006, Edge thickness, strip: 0.4 - 8 mm Edge thickness, roll: 0.4 - 3 mm Edge height: 55 mm Fedpfxsx Ezgco Addegk Panel thickness: 4 - 45 mm Feed rate: 12 m/min Ex stock, loaded free of charge

Condition: used, Year of construction: 2002, functionality: fully functional, Homag Profi Line CHF 51/32/32 Panel Saw - Year of manufacture: 2002 - Cutting width: 3200 x 3200 - 3 tables with air curtain - Saw projection: 102 mm - Cutting height: 85 mm - Main blade 400 mm - Main motor 11.2 kW (15 HP) - Incisor blade with independent motor Fgedjx Ey Nvepfx Addek

Condition: used, Year of construction: 2007, functionality: fully functional, Edgebander BRANDT KDF 660 for sale! Year of manufacture 2007 Edgeband thickness max 12 mm Panel thickness max 60 mm Thickness of coiled edgeband max 3 mm Fedpfox Ey D Hox Addsgk Feedrate max 16 m/min

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Features: Fgodox Enqujpfx Addjk - Aggregate control via touch-screen - Joint milling unit - Glue pot - End trimming unit - Radius milling unit - Radius scraper unit - Flat scraper unit - Buffing unit - Spraying unit (front and rear) Location: Rhineland-Palatinate Availability: By arrangement Sale on behalf of customer. Details provided without guarantee.

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Condition: very well maintained; low operating hours Equipment and technical data: - With PLC control including touchscreen - With joint milling unit with DIA tool up to 2 mm milling depth (maximum joint thickness 1 mm for special materials such as multiplex) - With extendable workpiece support Fodpsx Enqhefx Addsgk - With quick-heating glue pot with glue change device - With cross-cut saw - With combination milling cutter r = 2 mm with separate pneumatic adjustment - With corner copying unit r = 2 mm - With surface scraper - Maximum edge thickness: 2 mm - Minimum - maximum workpiece thickness: 10 - 40 mm - Minimum workpiece length: 180 mm - Feed speed: approx. 7 m/min - Ready for operation: approx. 3.5 min - Power consumption: approx. 7.4 kW - With undercarriage - Extraction port: 1 x 140 mm Dimensions: approx. 4,200 x 1,300 x 1,400 mm Weight: approx. 750 kg Availability: approx. end of January 2026 Location: Hesse

Condition: ready for operation (used), Year of construction: 2006, This HOMAG Brandt Profiline KDF - 780 was manufactured in 2006. It features a swiveling control panel, durable keypad, and a color graphic flat screen. The edgebander handles edge thickness from 0.4 to 12 mm and workpiece thickness up to 60 mm. Variable feed rate is 20 m/min. Overall length is 7360 mm. Contact us for more information about this machine. Application Types Edge Banding Fedpfx Adex Enkbjdogk

Condition: ready for operation (used), Year of construction: 2017, This FORMAT4 Tempora 60.08 edgebander was manufactured in 2017. It features a feed speed of 12 m/min with a chain feed system and can handle edge thicknesses from 0.4 to 8 mm. Designed for professional furniture manufacturing, it includes milling and scraper units for precise edge finishing and a heated glue pot for consistent adhesive application. Ideal for high-quality, reliable edgebanding performance. Contact us for more information. Fgodpfx Adsx Eniwodek Application Types Edge Banding

Condition: used, Year of construction: 2015, functionality: fully functional, total length: 7,920 mm, workpiece height (max.): 60 mm, warranty duration: 3 months, HOLZ-HER Edgebander ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15mm. Simple program changeover and tool adjustment via the 18.5" touch control panel. Short heating time for the GlueJet adhesive system of approx. 2 to 3 minutes, depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet application system and glue cartridges. Changing PUR adhesive and cleaning the system is quick and easy within a few minutes. Axis adjustment via high-precision, repeatable servo motors. Special configuration for materials with protective film, such as high-gloss and supermatt surfaces! One of the true highlights of this machine is the multifunction package, which shows its strengths in companies processing a wide variety of edges. The DIA tools are constructed in multiple stages and can switch between radii and bevels as needed – from the longitudinal milling unit to corner copying and the profile scraper. The pull-out workpiece support and the extended infeed area facilitate processing of large workpieces, and a guide system assists in feeding small parts into the machine. Edging thickness (coil material): 0.4 – 3 mm (depending on material) Edging thickness (strips): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR, with minimal effort required. All common edge types, including high-gloss, supermatt, and solid wood edges up to 15mm. iTronic – pressure and glue quantity control Prepared for connection to a RETURN system Motorized pressure bridge with upper belt drive Multifunction units for rapid changeover between radius, flush, and bevel processing Vertical & horizontal spray systems and much more. Fsdox Emf Dspfx Addjgk

Condition: used, Holz Her Sprint 1312 FÜ + PU Heavy-duty design – edge thickness 0.4 - 12 mm PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding automatic tracing nozzle Workpiece height 6-55 mm End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-10° angle of the trimming saws Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Scraper unit for bevels and radii with 2 pneumatically operated scraper holders pneumatic infeed and outfeed Flat scraper unit – finishing Spray device – PU Machine in TOP CONDITION Available from stock Lieboch Fodpjx Eilqjfx Addogk

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Feed Speed: 7 m/min / Min. Panel Length: 80 mm / Min. Panel Width: 60 mm/ Max. Panel Height: 40 mm / Edge Thickness: Up to 3 mm / Glue Pot Capacity: 2 liters End Trimming: Dual vertical saws at 12000 rpm / Profile Trimming: Inclined unit at 15° with 12000 rpm This 6-axis Bi Matic CH 2.2 edgebander was manufactured in 2010, featuring a glue pot capacity of 2 liters and dual vertical saws for end trimming at 12,000 rpm. It supports edge thickness up to 3 mm and requires an air pressure of 6 bar. If you are looking to get high-quality edgebanding capabilities, consider the Bi Matic CH 2.2 machine we have for tact us for more information. Application Types Fjdpfx Adjx D Sgusdjgk Edge Banding

Condition: ready for operation (used), Year of construction: 2015, This Hebrock TOP 2000 PLUS was manufactured in 2015. A used edge banding machine, it features a gluing unit, cutting unit, and combination milling unit. It handles edge material thickness from 0.5 to 3 mm and can manage workpieces from 10 mm to 45 mm in thickness. Ideal for precise edge finishing tasks. Contact us for more information about this machine. Fjdpfx Adsx D Nlbodogk Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2013, This Lange B 85 K edgebander was manufactured in 2013. It features an automatic edge feed, gluing unit, pre-cutting shears suitable for roll material up to 2 mm edge thickness, a pressure zone, cutting unit, and a combination milling station. A surface scraper is also included. Consider the opportunity to buy this Lange B 85 K edgebander. Contact us for more information. Application Types Edge Banding Fgjdpfjx D Nlhex Addok

Condition: ready for operation (used), Year of construction: 2007, General Data Fjdpfx Aex D Nqwjddogk Measurements depth 7755 mm This HOMAG Optimat KAL 310 was manufactured in 2007. It features a left-hand version edgebander with a maximum workpiece thickness of 60 mm and a feed speed of up to 24 m/min. Equipped with a PU edge gluing system and PowerControl PC 22 unit, it spans 7755 mm in length and handles edge thickness up to 3 mm. Consider the opportunity to buy this HOMAG Optimat KAL 310 edgebander. Contact us for more information. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2011, Additional Equipment Joint trimming unit Gluing unit Snipping unit Pre-milling unit Shaping trimming unit Profile scraper blades Surface scraper blades Buffing unit Grooving unit Fgedpfsx D N T Eex Addok This BRANDT KDF 890 2CU edgebander was manufactured in 2011. It features a joint trimming unit, gluing unit, snipping unit, pre-milling unit, shaping trimming unit, profile scraper blades, surface scraper blades, buffing unit, and grooving unit. Consider the opportunity to buy this BRANDT KDF 890 2CU edgebander. Contact us for more information. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2010, This HOMAG KAL 310/7/A3 was manufactured in 2010. A used single-sided edge banding machine featuring a 28-position ISAS edge magazine, PU gluing unit, and Boomerang return system. It includes a joint milling unit with two motors and a PU 34 gluing system with a capacity up to 6 kg/h. Ideal for precise edge banding applications. Contact us for more information about this machine. Fsdex D Ra Tjpfx Addegk Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2021, Additional Equipment Mobile Console with integrated PC"eye-M": 21.5" LCD color display through a 16/9 sized touch screen / AAR Anti-Adhesive Device: Positioned before panel edge trimming unit / Spray-Mist Device: Positioned for edge finishing and glue cooling / Loader for Narrow Pieces: Device to facilitate manual square loading of narrow pieces Fgjdpfxsx D Rcbj Addok This SCM STEFANI MD edgebander was manufactured in 2021. It features a versatile automatic edge banding capability for solid wood up to 15 mm, with an option for 22 mm. The machine includes an "SGP" glue pot for both EVA and PUR glues, ensuring a perfect joint line. The "Startouch" control system offers a 12” touch-screen display, customizable working programs, and graphic simulation of machining. Ideal for high productivity with speeds up to 25 m/min. Contact us for more information. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2005, This IMA Novimat Systems I/R75/1000 edgebander was manufactured in 2005. It features a robust ICOS OPEN control system, a jointing milling unit with powerful motors, and a versatile multi-functional processing unit for detailed edge finishing. The machine includes a 32-position edge magazine and an advanced gluing unit with an automatic PU melting system. Consider the opportunity to buy this IMA Novimat Systems I/R75/1000 edgebander. Contact us for more information about this machine. Application Types Fgodpox D Ri Ujfx Addek Edge Banding

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Diamond cutter and glue roller newly installed. Fodpfx Aex D Rkloddsgk This FELDER MG580 edgebander was manufactured in 2010. Ideal for precise edge banding applications, it represents a reliable choice for enhancing your woodworking operations. Contact us for more information. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2022, Additional Equipment Anti-adhesive spray unit "AAR" - Complete with 2 sprayers and a storage container Spray device for finishing the edge Fsdpsx D Rl Aofx Addegk Top pressure with belt Motors with power 4 kW for RT/E pre-milling unit "SGP" glue container with NC dosing Ceramic lamps with infrared rays "MultiEdge" device for the RI/S flush milling unit This SCM Stefani MD RM edgebander was manufactured in 2022. It features adjustable chain feed speeds of 10-22 m/min and handles edge thicknesses up to 15 mm. Equipped with a pre-milling unit, glue unit with quick-change capabilities, and a cutting unit for precise edge finishing. The Maestro active edge control system enhances user interaction for optimal performance. If you are looking to get high-quality edgebanding capabilities consider the SCM Stefani MD RM machine we have for sale. Contact us for more information. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2006, This IMA Combima Systems/I/R75/1370 edgebander was manufactured in 2006. It handles workpieces ranging from 250 to 2800 mm in length and 115 to 1300 mm in width, with thicknesses up to 40 mm. Designed for materials like chipboard and MDF, it features a hot melt adhesive applicator and a servo edge feed system. Ideal for high-quality edge banding, consider the opportunity to buy this IMA Combima Systems/I/R75/1370 edgebander. Contact us for more information about this machine. Fedpfx Aox D I Hqeddsgk Application Types Edge Banding