CHZ-Blechtechnik GmbH

Condition: used, functionality: fully functional, Year of construction: 1992, controller manufacturer: Nuova, controller model: PRG 911., working width: 2,000 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, overall weight: 3,100 kg, Capacity: 2000 x 4 mm. Backgauge: Motorized, Nuova PRG 911. Adjustable blade angle: Yes. Adjustable cutting length: Yes. Adjustable blade gap: Yes. Year: 1992 Kdedpsxpf Rdsfx Aabeu Country of origin: Germany. Size (L x W x H): 2750 x 3800 x 1700 mm. Weight: 3100 kg. With sheet support, sheet conveyor, squaring arm, 2 support arms and extra blades. All our machines are tested and serviced before delivery.

Condition: used, functionality: fully functional, Year of construction: 1989, working width: 1,250 mm, sheet thickness steel (max.): 4 mm, overall weight: 2,600 kg, Capacity: 1250 x 4 mm. Backgauge: Manual, 500 mm. Adjustable blade angle: Yes. Adjustable cutting length: Yes. Adjustable blade gap: Yes. Motor: 7,5 kW. Kedpfx Ajxpf Hreabedu Year: 1989 Country of origin: Denmark. Size (L x W x H): 1850 x 1600 x 1800 mm. Weight: 2600 kg. Special machine for thin plates. With new 500 mm. manual back gauge, pneumatic plate holddowns, plate seperator, adjustment of pressure on hold downs and 2 movable support arms with rulers and flipstops. All our machines are tested and serviced before delivery.

Condition: good (used), sheet width 2540 mm plate thickness 4.0 mm Kdsdexn Tx Hopfx Aabeu thickness at "Niro-steel" 3.0 mm 9.0 St. back stop - adjustable 100 mm/sek cutting angle 1° 20 table height 855 mm table depth 500 mm no. of strokes 33 - 55 Hub/min 0 max. 250 bar engine output 5.5 kW weight of the machine ca. 5000 kg. range L-W-H 2960 x 1990 x 1700 mm From a maintenance workshop Good / well-maintained condition (!!) Equipment: - Powerful electro-hydraulic guillotine shear - AMADA NC control unit * Pivoting control panel, front left - NC electro-motorized material backgauge * Backlash-free ball screw - Manual cutting gap adjustment with 2 levers - 1x long side stop - 1x support arm - Rigid welded machine body - Sighting device with three mirrors (cutting according to marking) - Front safety guard (finger protection) - 1 freely movable foot switch - Operating instructions (PDF) * Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: ready for operation (used), Year of construction: 1978, Available immediately from location: LVD Hydraulic Guillotine Shear Type MVS 62/4 Year of manufacture 1978 Cutting length 6200 mm Material thickness 4.0 mm Digital backgauge 750 mm Drive 12.5 kW Weight 7500 kg Price: €5,500 plus VAT, ex location Kdsdjxn Rw Hjpfx Aabeu

Condition: ready for operation (used), Year of construction: 1988, Immediately available ex-location: Hydraulic guillotine shear Fasti, type 509 25/6, year of manufacture 1988. Cutting length 2550 mm, material thickness 6 mm, electric backgauge 750 mm, drive 7.5 kW, weight 4 t. Price: EUR 5,500 plus VAT ex-location. Kjdpfx Aoxn Np Ioabodu

Condition: good (used), functionality: fully functional, LVD Plate Shear MV 31/3.5 – 3100 × 3.5 mm – Guillotine Shear Manufacturer: LVD Company, Gullegem (Belgium) Model: MV 31/3.5 Max. cutting length: 3100 mm Max. sheet thickness (steel): 3.5 mm Drive system: hydraulic Backgauge: electric, 750 mm Machine weight: approx. 4,000 kg Dimensions: approx. 4000 × 1800 × 1600 mm Kdsdjxmvl Tspfx Aabou LVD guillotine shear, Model MV 31/3.5, suitable for cutting steel sheets up to 3.5 mm thick over a width of 3,100 mm.

Condition: excellent (used), Year of construction: 2001, In goed werkende staat verkerende gebruikte 3 meter plaatschaar van Safan. Type: HT 310x4 Ksdpfx Aaexlf Inobjdu Capaciteit: 3100 x 4 mm Touch screen besturing Automatische plaatdikte en hoek instelling

Condition: excellent (used), functionality: fully functional, Year of construction: 1988, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, sheet thickness (max.): 3 mm, Neat Safan shear with a maximum cutting length of 4300mm and a cutting capacity of 3mm steel. Equipped with CNC back gauge. The machine comes directly from production and will soon be replaced by a modern machine. We are selling this machine on behalf of our customer and will forward any reasonable offer. Ksdpoxfl Uuofx Aabedu

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 10 h, machine/vehicle number: SO151002, sheet thickness (max.): 3 mm, warranty duration: 36 months, cutting length (max.): 1,500 mm, lateral stop: 1,000 mm, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, Electric guillotine shear ShearOne E1500x3 CoastOne - Made in Finland Electric guillotine shear ShearOne 15 - Made in Finland 1500mm x 3mm TC15 touchscreen control - Sheet metal holding - Automatic cutting gap adjustment Kedpfx Asxd U D Aoabodu

Condition: excellent (used), functionality: fully functional, Cutting length: 2520 mm Sheet thickness at 400N/mm²: 4.0 mm Strokes per minute: 47 Back gauge approx.: 750 mm Throat depth: 350 mm . Very good original condition! . Kdodpfx Asxd Dygsabju Equipment: Left side gauge, 750 mm Cutting gap adjustment Back gauge with vernier scale and magnifier (and light) Overload protection . Other: Both blades are sharp and have not yet been shimmed The cylinders are dry

Condition: used, sheet width 2040 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm 9.0 St. back stop - adjustable 100 mm/sek cutting angle 1° 20 table height 855 mm table depth 500 mm no. of strokes 33 - 55 Hub/min 0 max. 250 bar engine output 5.5 kW weight of the machine ca. 3300 kg. range L-W-H 2550 x 2100 x 1700 mm From a maintenance workshop Good / well-maintained condition (!!) Equipment: - Powerful electro-hydraulic guillotine shear - AMADA NC control unit * Pivoting control panel, front left - NC electro-motorized material backgauge * Backlash-free ball screw - Manual cutting gap adjustment with 2 levers - 1x long side stop - 1x support arm Ksdpfsxacgwjx Aabsdu - Rigid welded machine body - Sighting device with three mirrors (cutting according to marking) - Front safety guard (finger protection) - Rear sheet chute - 1 freely movable foot switch - Operating instructions (PDF)

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard Kdodpexab Tvjfx Aabsu - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: used, Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA Kdedpjxabvqefx Aabeu plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop good / well-maintained condition (!!) Equipment: - robust electro-hydraulic "swing cut" guillotine shears - electro-motorized rear stop - electric cutting length limiter - electro-motorized cutting gap adjustment - front support table including recessed grips - 1x stable side stop, with scale and tilting cam - 3x stable, front support arms - 1x freely movable foot switch - front finger guard - EMERGENCY STOP button at the front - operating instructions * Special accessories included: - pneumatic sheet holding device for thin sheet metal cuts

Condition: used, Year of construction: 1990, plate width 2503 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA Kjdpfexabd Uex Aabodu plate thickness 6.0 mm ALU number of strokes - loaded 15 - 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO TYP 85 total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2913 x 2250 x 1760 mm Features: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * with ELGO control unit - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam - 2x sturdy front support arms - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF)

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU Ksdpfxjxaa I Sj Aabodu number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, EHT hydraulic guillotine shear type TSS 3-40, working width 4100 mm, max. sheet thickness 3.0 mm, pneumatic sheet support device, NC controlled backgauge, support arms, extra set of blades. Kodjw Uf Nrspfx Aabedu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, working width: 6,500 mm, sheet thickness (max.): 3 mm, overall weight: 15,000 kg, TECHNICAL DETAILS Sheet width: 6500 mm Sheet thickness: 3 mm Back gauge – adjustable: 1000 mm Kdodpfx Asw Suxkjabeu MACHINE DETAILS Weight: approx. 15,000 kg Dimensions: 7500 x 3000 x 2500 mm EQUIPMENT - 1 x set of knives

Condition: good (used), functionality: fully functional, Year of construction: 1983, We are selling a used guillotine shear from the manufacturer Digep DLB 4 3050. The machine is fully operational, connected to power, and fitted with sharp blades. Technical specifications: - Sheet thickness: 4 mm - Sheet width: 3050 mm - Machine dimensions: 3.7 x 2.1 x 1.4 m - Machine weight: approx. 4.65 t The price is ex works loaded at the location in Werdau. Kdsdpfjw Rdzljx Aabou

Condition: used, functionality: fully functional, working width: 2,500 mm, sheet thickness (max.): 4 mm, Guillotine Shear NTC 2500/4 Kedpfx Aow N E Rreabsdu

Condition: used, Max. cutting length: 4040 mm Max. sheet thickness: 4 mm steel Motorized adjustable backgauge with digital display up to 1000 mm Pneumatic sheet metal holding Side stops and table extensions cutting length limitation Cutting edge lighting Weight approx. 7500 kg Kdsdpfx Ajw Hygdsabju

Condition: used, Year of construction: 1981, Max. thickness 4 mm Max. cutting length 2000 mm Kjdpfx Aajw Hf Duobedu Motorized back gauge w/dro

Condition: used, Have we aroused your interest? Then please register on our homepage - we look forward to hearing from you! Your Maschinen Besmann Team We have an Amada Promecam GTH 420 for sale, which was manufactured in France. Due to its size, it also fits into a smaller workshop. Amada Promecam 420 GTH guillotine shears Manufacturer: Amada Type: Promecam 420 GTH Condition: used Cutting length: 2000 mm material thickness: 4mm in steel Backgauge: electric, 750 mm Ksdpfx Asw Eiprjabedu Motor power: 5,5 KW Weight: approx. 3300 kg

Condition: ready for operation (used), Year of construction: 1995, working width: 2,000 mm, sheet thickness steel (max.): 4 mm, overall weight: 3,500 kg, capacity 2000x4 mm, electric stops, weight 3500 kg Ksdjw Dzqxspfx Aabodu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, actuation type: hydraulic, stroke rate (min.): 35 1/min, stroke rate (max.): 80 1/min, sheet thickness (max.): 4 mm, section length (max.): 3,150 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Cutting length: 3,150 mm Sheet thickness: 4 mm Cutting angle: 1.45° Strokes per minute: 35 – 80 spm Throat depth: 200 mm Number of hold-downs: 16 pcs Backgauge: 5 – 1,000 mm Table height: 750 mm MACHINE DETAILS Total power requirement: 7.5 kW Weight: 4,200 kg EQUIPMENT Kdodpfx Aow Dcl Doabou Foot switch Electric backgauge Elgo 1,000 mm Angle stop 2 x sheet support arms Pneumatic sheet lifting device

Condition: good (used), Year of construction: 1999, cutting width: 6.050 mm cutting thickness: max. 4 mm Kedpjwzvntofx Aabodu length stop range: 10 - 1.000 mm