Bach Machines

Condition: used, Year of construction: 1998, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 94.98.030, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 100 rpm, total height: 2,000 mm, total width: 2,000 mm, total length: 2,800 mm, table width: 520 mm, table length: 900 mm, position of the milling head: mittig, type of input current: three-phase, rotational speed (max.): 6,000 rpm, rotational speed (min.): 100 rpm, table load: 400 kg, overall weight: 3,500 kg, input voltage: 400 V, workpiece weight (max.): 100 kg, input current: 40 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Good used CNC milling machine with low hours. Used exclusively for repairs and very small production runs. Extensive assortment of tool holders as shown in the photos, including vise, chucks, cutters, plates, and tap holders. Also equipped with a Benz high-speed spindle for wet operation up to 25,000 rpm. TECHNICAL DETAILS Drive power at 44% duty cycle: 15 kW Drive power at 100% duty cycle: 6 kW Max. torque: 50 Nm Machining spindles (vertical and horizontal) Max. spindle torque at 44% duty cycle: 800 Nm Number of gearbox stages: 4 Adjustable speed range (vertical and horizontal): 10 – 6,000 rpm Toolholder / pull stud: SK 40 / DIN 69871 Max. tool weight: 13 kg Tool diameter: 130 mm Automatic travel distances Spindle longitudinal feed (X-axis): 600 mm Spindle transverse feed (Y-axis): 500 mm Spindle vertical feed (Z-axis): 450 mm Feed drives (AC) Programmable feed rate X / Y-axis: 0 – 15,000 mm/min Programmable feed rate Z-axis: 0 – 12,000 mm/min Rapid traverse rate X / Y-axis: 15,000 mm/min Rapid traverse rate Z-axis: 12,000 mm/min Coolant tank capacity: 150 l Flow rate: approx. 20 l/min Lhjdpsywn Siofx Abced Clamping table Table size: 520 × 900 mm Number of T-slots: 4 T-slot width: 14 H7 Table load capacity: 400 kg Tool changer TCD 44 Tool stations: 22 Tool diameter: 80 / 130 mm Max. tool length: 350 mm Max. tool weight: 6 kg Max. workpiece weight in drum magazine: 200 kg Chip-to-chip time: 20-25 s Tool change time: 12 - 16 s Electrical connection data Total installed nominal power: 15.8 kW Usable and connected load: 12.3 kW Operating voltage and frequency: 3 × 400 V / 50 Hz

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 63814, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, quill stroke: 80 mm, TECHNICAL DETAILS Travel path X-axis: 600 mm Travel path Y-axis: 400 mm Travel path Z-axis: 400 mm Clamping surface: 254 mm x 354 mm Ledoywhbdepfx Abcohd Tool holder: ISO 40 Quill stroke: 80 mm Spindle speeds: 80 - 4,000 rpm Rapid traverse X: 4 m/min Rapid traverse Y: 3 m/min Rapid traverse Z: 5 m/min MACHINE DETAILS Total connected load: 16 kVA

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2203-8478, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, quill stroke: 120 mm, type of input current: three-phase, overall weight: 1,700 kg, For sale is a Deckel tool milling machine, model FP4MK with Aktiv control. The machine comes from a training workshop, resulting in very low operating hours and an exceptionally good overall condition. Lsdpfxeywfpfo Abcjhd This is the ultimate milling machine for toolmaking or prototyping. The machine can be operated conventionally or via path control. -Traverse path X-axis: 500 mm -Traverse path Y-axis: 400 mm -Traverse path Z-axis: 400 mm -Tool holder: SK40 Automatic SK40 tool clamping at the push of a button. Feed and rapid traverse on all axes. -Total weight: approx. 1600 kg. The original full enclosure with sliding doors is included and can be folded away as needed. Additionally, the complete Deckel documentation is included, as well as a high-quality machine vice and a wide range of SK40 Weldon tool holders. The machine operates flawlessly and was recently serviced. The bellows on the X and Z axes are brand new.

Condition: not inspected (used), Year of construction: 1986, functionality: unexamined, machine/vehicle number: 7393, travel distance X-axis: 500 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 4,000 rpm, controller model: Siemens 810, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 360 mm Travel Z-axis: 400 mm Spindle speed range: 20 – 4,000 rpm Table size: 800 x 390 mm Feed rate range: 1 – 2,000 mm/min Rapid traverse: 5 m/min Number of T-slots: 6 T-slot width: 14 mm T-slot spacing: 63 mm Tool holder: SK 40 Number of gear steps: 4 MACHINE DETAILS Control system: Siemens 810 Total power requirement: 9 kW Dimensions & Weight Space requirements (L x W x H): approx. 2,500 x 2,900 x 1,900 mm Lhjdpfxsyv A A Hs Abced Machine weight: approx. 2,000 kg

Condition: ready for operation (used), Year of construction: 1989, Available immediately from location: MAHO Toolroom Milling Machine Type MH 500 M Year of manufacture 1989 Heidenhain Digital Display Table 800 x 360 mm SK 40 Spindle speeds 63 – 4000 rpm Quill stroke 50 mm Travel X/Y/Z 500/380/350 mm Drive 3 kW Feed rates 10 – 1000 mm/min Coolant system Lsdpsyvzakefx Abcehd Weight 1600 kg Adapters Hydraulic vise Price: €3,000 plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1990, Immediately available ex location: CNC Tool Milling Machine Hermle Type UWF 700 Year of manufacture: 1990 Heidenhain TNC 145 Table: 700 x 280 mm Travel X/Y/Z: 410/310/400 mm SK 40 Drive: 2.2 kW Hydraulic tool clamping Spindle speeds: 40 – 2000 rpm Lhedpfx Asyvy U Tebcsd Quill stroke: 63 mm Rapid traverse in all axes: 1.5 m/min Drive: 2.2 kW Tool holders, vise Weight: 1.5 t Price: EUR 2,750.—plus VAT ex location

Condition: good (used), Year of construction: 1991, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, X-travel: 560 mm Y-travel: 500 mm Z-travel: 400 mm Control: TNC 360 Spindle speed: 40-4,000 rpm Total power requirement: 7.5 kW Machine weight approx.: 2.6 t Ljdeyvy Akspfx Abcjhd Space requirement approx.: 2.6 x 1.8 x 2.2 m

Condition: used, Year of construction: 1975, Universal milling machine MAHO MH800, year approx. 1975 Spindle mount ISO 40 X-800 mm with universal table. Lodpfx Ajyvr Eqsbcehd Y axis feed not working? Weight approx. 3 t. Machine documentation available.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Universal Milling Machine HERMLE UWF 802 M with HS 401 Contouring Control Lhedpfeyu S A Eex Abcod - Very well-maintained original condition from university - Year of manufacture: 1998 - HS 401 contouring control - Travel paths X / Y / Z: 500x430x400mm - Spindle speed range: 18 - 3550 rpm - Stepless feed in all three axes: 0-1600mm/min - Rapid traverse: 0-1.6m/min in all three axes - Vertical and horizontal milling attachment - Tool holder: ISO 40 - Hydraulic tool clamping - Universal rotary / tilting / swiveling table Incl. rotary table plate - Universal angle table - Drive power: 6 kW - Centralized lubrication - Chip trays - Machine feet - Work lamp - Electric spindle guard - Documentation Dimensions (LxWxH): 1.9x1.8x1.9 meters / Weight: 1800KG Subject to errors and input mistakes.

Condition: used, Year of construction: 1985, machine/vehicle number: 11429, For sale: MAHO MH 1000c milling machine Serial no.: 11429; BKW GmbH model S..05ES Year: 1985; 18 bar; Volume: 1.6 m3/h; 3000 rpm; Power: 0.36 kW; 50-60 Hz; Voltage: 190-240 V; Current: 2.85 A; Lhsdpsyuwr Sjfx Abcsd Net price: 9000 Euro

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 450 mm table surface area 900x520 mm turning speeds 4000 U/min tool taper SK 40 Control Heidenhain type TNC 355 elec. weight of the machine ca. 2,7 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Lsdsyutuvspfx Abcshd Your Markus Hirsch Team

Condition: like new (used), Year of construction: 2018, operating hours: 170 h, XYZ 500 LR Vertical Machining Centre (170hrs) Siemens 828D Control with Shop Mill, Optimised Digital Servo Drives, Rigid Tapping,Flood Coolant, Worklight, 12 Station Carousel ATC, Easy Clean Swarf Tray, Steel Concertina Guards on all axes, Powder Coated Guarding, Pull Studs, USB Port Technical Specification: X Axis Table Travel: 500 mm Y Axis Table Travel: 400 mm Z Vertical Travel: 440 mm Table Size: 580 × 400 mm Spindle Centre to Column: 415 mm Spindle to Table: 100 – 550 mm Column Front to Table Centre: 215 – 615 mm Rapid Feedrate: 20 m/min Cutting Feedrates: 1 – 20,000 mm/min Max Table Load: 250 kg Spindle Speeds: 5 – 8,000 rpm Spindle Motor: 15 kW (20 hp) Spindle Taper: BT40 Toolchanger: 12 station carousel Toolchange Time: 8 seconds Max Tool Diameter: 100 mm Max Tool Weight: 7 kg Coolant Tank Capacity: 105 L Ballscrew: Grade C3, 28 mm dia P8 AC Digital Servo Motors: X = 8 Nm, Y = 8 Nm Max Torque Z Axis: 12 Nm, 3,000 rpm Machine Weight: 2,400 kg Footprint: 1,890 × 1,982 × 2,700 mm *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79112 Machine Serial Number: SMB0147 Cost: £29,95000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Lsdpfx Absyuga Sjcohd Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), CNC - Universal Milling Machine HERMLE UWF 902-S - Heidenhain 426 control - Year of manufacture: 1997 - Travel X/Y/Z: 600-450-500 mm - Tool holder: SK 40 - Vertical - horizontal milling unit - Boring quill - Coolant system - Swivel/angle table - Machine enclosure - Documentation Lhjdpfxsytnpxe Abcsd Dimensions (LxWxH): 3.9x2x2 meters / Weight: 4000 kg Subject to errors and omissions.

Condition: used, Year of construction: 1995, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 800 x 400 mm range of revolution per miute: 63 - 3150 / 18 step U/min Lsdpfx Asytnd Aebcehd feed continuous: X/Y/Z: 8 - 800 / 8step mm/min. spindle taper: SK 4 spindle head swivable left - right: 90 ° quill stroke: 105 mm total power requirement: 5,3 kW weight of the machine ca.: 2245 kg machine dimensions LxWxH: 2,1 x 2,8 x 1,9 m Control screen replaced with new LCD. The milling machine is equipped with measuring system with digital display PROTOTRAK MX2. The X and Y axes can run cycles. (interpolation), the Z-axis is moved manually. Spindle with right/left travel Automatic tool clamping via control command Coolant device (without container) Chip collection tray Tool accessories (comparable in the photo) *

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information Ledpfoyrnzfsx Abcjhd * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: used, Year of construction: 1984, machine/vehicle number: 2804-1181, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 450 mm, table length: 700 mm, rotational speed (max.): 3,150 rpm, rotational speed (min.): 32 rpm, Used DECKEL tool milling machine model FP 3A CNC Table size: 700x450mm, spindle taper SK40 DIN 2080, Travel paths: X/Y/Z = 500/400/400mm, spindle speeds from 31.5 to 3150 rpm (21 working spindle speeds), feed rate 5-1250mm/min, rapid traverse in X, Y and Z 2500mm/min, coolant system and machine feet. Year of manufacture: 1984; the machine was overhauled by Harich in 2010. Lhedpfx Abjyrnvvscsd The machine is located at our site in 71334 Waiblingen-Beinstein and can of course be inspected. Please contact us.

Condition: used, Year of construction: 2002, Deckel Maho DMU 50 T Milling Machine Condition: Used Ledeyrgk Eepfx Abcehd Year of manufacture: 2002 Technical Data Tool holder: SK 40 Tool stations: 16 positions Travel X/Y/Z: 500 mm / 400 mm / 400 mm Spindle speed range: 20 - 9000 rpm, stepless Table size: 700 mm x 500 mm rotary table Motor power: at 100% duty cycle 9 kW / at 40% duty cycle 13 kW Connection total: 17 kVA Weight: approx. 3000 kg Dimensions LxWxH: approx. 2100 mm x 1520 mm (without peripherals) / approx. 2140 mm

Condition: good (used), Milling Machine Mikron WF 32 CH Technical Data: Lsdpfsyq Hcrsx Abcshd X-axis: 560 mm Y-axis: 500 mm Z-axis: 400 mm Clamping table Clamping surface vertical: 300x450 mm Number of threaded holes: 2 x 6 Speed range: 25-6300 rpm Swivel range vertical milling head: +45°

Condition: good (used), Year of construction: 1996, Milling Machine Mikron WF 21C 1996 Technical Data: X-axis: 400 mm Y-axis: 400 mm Z-axis: 400 mm Ljdpfx Abjyq E I Tocjhd Clamping Table Clamping surface, vertical: 300x450 mm Number of threaded holes: 2 x 6

Condition: used, Year of construction: 2017, Milling machine Optimium Optimil F 105 Lhsdpfx Abeyphnyjcsd

Condition: used, table width: 800 mm, table length: 450 mm, A Mikron milling machine is for sale in good, used condition, as shown in the pictures. Technical data: • Manufacturer: Mikron • Model: WF-21C / 150 • With Heidenhain TNC 150 control • Table: approx. 800 x 450 mm • Condition: Used Shipping by freight forwarder possible (depending on postal code) Ljdpeympa Ejfx Abcohd International buyers are welcome! You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Errors in technical data and prior sale reserved.

Condition: as good as new (ex-display), Year of construction: 2020, The machine is on display and has only been used for demonstration purposes. Optimill F 120X CNC milling machine, directly from the manufacturer. F 120X – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. - Heavy-duty design - High productivity - Linear guides for high rapid traverse speeds on all axes - 21-position tool changer magazine - High reliability - Meehanite quality cast-iron construction - Cross table, precision-ground with 3 T-slots - Strongly ribbed, torsion-resistant machine base - Precision-ground, preloaded high-performance ball screws on all axes - High-torque servo drives mounted directly on the ball screws on all three axes - Electronic handwheel - Chip conveyor - Cleaning pistol - RJ45 connection, USB port, and power connection (230V) - Coolant system with 210-litre coolant tank - Heat exchanger Included options: - PPU 290 touch panel - 16,000 rpm inline spindle with oil cooler - Belt conveyor with chip trolley Machine leasing available via Siemens Finance; liquidity required. Dimensions and Weights - Length approx. 2,315 mm - Width/depth approx. 2,194 mm - Height approx. 2,325 mm - Weight approx. 3,800 kg Drilling/Milling Capacity - Maximum cutter head size: 80 mm Feed/Rapid Traverse Speed - X-axis: 40,000 mm/min - Y-axis: 40,000 mm/min - Z-axis: 40,000 mm/min Electrical Data - Connection voltage: 400 V - Number of phases: 3 - Current type: AC - Mains frequency: 50 Hz - Electrical connection - Total connected load: 45 kVA Vertical Spindle to Table Distance - Minimum: 150 mm - Maximum: 450 mm T-slot Size: 14 mm Number of T-slots: 3 T-slot pitch: 125 mm Maximum table load: 250 kg Accuracy - Repeatability: ± 0.006 mm - Positioning accuracy: ± 0.005 mm Coolant System - Coolant pumps - Each pump drive power: 370 W - Tank capacity: 120 l Control - Type: Sinumerik 828D PPU 290 - System software: SW 28x - CNC memory: 8 MB - Block change time: 2 ms - Look ahead: 150 - Number of tools: 512 Travel Range - X-axis, automatic: 500 mm Ljdpfx Abjymkbqecehd - Y-axis, automatic: 400 mm - Z-axis, automatic: 300 mm Vertical Spindle - Spindle taper: BT 30 - Speed range: 10 – 16,000 rpm - Main drive power (continuous S1): 12 kW - Main drive power (S6-30% operation): 22.8 kW - Main drive torque (continuous S1): 38 Nm - Main drive torque (30% operation S6): 116 Nm Feed Motor Torque - X-axis, continuous S1: 6 Nm - Y-axis, continuous S1: 6 Nm - Z-axis, continuous S1: 11 Nm Servo Tool Changer - Design: Carousel in front of the spindle - Number of tool stations: 21

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. Optimill F110 ECO Premium CNC milling machine, direct from the manufacturer. F110 ECO – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. Model: F110 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling spindle with belt drive Machine Specifications Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 operation: 7.5 kW Torque of drive motor S1 operation: 45 Nm Lhedpfxeymkbko Abcod Drive motor S6 30% operation: 16.2 kW Torque of drive motor S6 30% operation: 103 Nm Spindle taper: BT40 Coolant System Coolant pump output: 900 W Max. flow rate: 35 l/min Tank capacity: 116 liters Cleaning pump Milling Precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (neighboring tool pockets empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool-to-tool: 2.5 seconds Travel (Axis Movement) X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed Drive Rapid traverse X, Y, Z-axis: 48 / 48 / 32 m/min Motor Torque X / Y / Z-axis: 11 Nm / 11 Nm / 20 Nm Feed Forces X / Y / Z-axis: 3.67 kN / 3.67 kN / 6.68 kN Spindle Speed Range Speeds*: 8,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6–8 kg/m³ Milling Table Distance spindle to table: 100–600 mm Table length x width: 800 x 400 mm T-slot size / number / pitch: 18 mm / 3 / 100 mm Max. payload: 400 kg Dimensions Length x width x height: 2,100 x 2,300 x 2,750 mm Total weight: 4,300 kg Equipment Linear guides with ball screw drive for high rapid traverse speeds on all axes Telescopic guideway covers on all three axes Automatic lubrication system Portable electronic handwheel with enabling switch and emergency stop button RJ45 interface and 230 V power outlet Work area machine lamp Cleaning pistol Ball screws and linear guides from THK Chip flushing system Cooling at the spindle head (machining area) Control cabinet Arm-type tool changer SW24 CE *More options available

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optimill F 110 E CNC milling machine, direct from the manufacturer. F 110 E – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 808D control, stands out for its performance, speed, precision, and long service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Linear guideways with ball circulation for high rapid traverse speeds on all axes • Powerful servo drives on all three axes • Telescopic covers on all guideways • Automatic lubrication • Spindle oil cooler • Solid, precision-ground milling table with three oversized T-slots Lodpfx Aboymkbdecehd • The portable electronic handwheel with enabling button and emergency stop switch greatly facilitates program setup • Coolant system with chip flushing and cleaning gun • Chip conveyor with auger design • Chip cart • RJ45 interface and 230 V power connection • Enclosed electrical cabinet with integrated heat exchanger ensures optimal temperature and prevents ingress of dirt particles • Machine lamp providing over 500 Lux in the working area RJ45 Ethernet port 8.4” LCD color display with 800 x 600 resolution Prepared for remote maintenance AST function: enables easy optimization for higher requirements in dynamics and accuracy Absolute encoder / no reference run necessary Higher accuracy Travel distances: X = 650 mm Y = 400 mm Z = 500 mm Dimensions and weights Length approx. 2,100 mm Width/depth approx. 2,300 mm Height approx. 2,750 mm Weight approx. 4,100 kg Boring/milling performance Max. cutter head size: 90 mm Electrical data Connection voltage: 400 V Network frequency: 50 Hz Electrical connection Total connected load: 20 kW Horizontal milling table: Length: 850 mm Width: 400 mm Distance spindle nose to table min.: 100 mm Distance spindle nose to table max.: 600 mm T-slot size: 18 mm Number of T-slots: 3 T-slot spacing: 100 mm Maximum load capacity: 400 kg Accuracy Repeat accuracy: ±0.005 mm Positioning accuracy: ±0.005 mm

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition. Optimill F 110 HSC Premium CNC milling machine direct from the manufacturer. F 110 HSC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and a long service life. - Heavy-duty design - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profiled rail with recirculating ball bearing for high rapid traverse speeds in all axes - High-torque servo drives in all three axes - Telescopic guideway cover on all three axes - Automatic lubrication - Massive, exact milling table with three T-slots, large dimensions and precision-ground - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to the run-in of programs considerably - Coolant device with chip flushing system and cleaning gun - Chip conveyor in belt design ensures efficient chip removal - Chip trolley - RJ45 plug connection and 230 V power connection - Closed switch cabinet with integrated heat exchanger ensures optimum temperature and prevents the ingress of dirt particles - Machine light in the work area - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus - 1-year Basic maintenance contract included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected load 15 kVA Milling spindle Drive motor S1 operation 9 kW Torque drive motor S1 operation 57 Nm Drive motor S6-30% operation 21.2 kw Torque drive motor S6-30% operation 135 Nm Spindle holder SK 40 / DIN 69871 Internal spindle cooling option Lhsdpfjymka Hox Abcod Drive motor S1 operation 10.5 kW Torque drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque drive motor S6-30% operation 125 Nm Cooling lubricant system Power of the coolant pumps, 2 pieces 900 W Delivery rate max. 35 l/min. Tank capacity 116 liters Cleaning pump Power of the cleaning pump 530 W Milling accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Double arm gripper type Number of tool positions 20 Tool diameter max. 78 mm Tool diameter (secondary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time tool change: tool to tool 2.5 seconds Travel distance X-axis 650 mm Y-axis 400 mm Z-axis 500 mm Feed drive Rapid traverse X-, Y-, Z-axis 48 / 48 / 32 m/min. Motor torque X- / Y- / Z-axis 11 Nm / 11 Nm / 20 Nm Feed forces X- / Y- / Z-axis 3.67 kN / 3.67 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle - table 100 - 600 mm Table length x width 850 x 400 mm T-slot size / number / distance 18 mm / 3 / 100 mm Max. load 400 kg Dimensions Length x width x height 2,100 x 2,300 x 2,750 mm Total weight 4,300 kg