Екотоп - Димитър Киров Ет

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 2,000 kg, input voltage: 400 V, SENTE Makina TFWSI-1600 HVAC machine, designed for the production of large-diameter ventilation ducts. Model: TFWSI-1600 Lhjdsz D Ippspfx Abyel Pipe diameter range: Ø100 – 1600 mm Material: galvanized steel, aluminum, other sheet metal Material thickness: approx. 0.4 – 1.0 mm (depending on the configuration) Production speed: up to approx. 50 m/min Cutting: pneumatic rotary knife Control: PLC with touchscreen panel Power supply: 3-phase Year 2023, as new condition.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, workpiece length (max.): 3,048 mm, workpiece width (max.): 1,524 mm, sheet thickness (max.): 3 mm, table load: 5,000 kg, No minimum price – guaranteed sale to the highest bidder! The machine’s control system and software have been renewed! Lhsdpfx Ajzzkt Uebyjl TECHNICAL DETAILS Sheet thickness for circuit boards with a tensile strength of 400 N/mm² max.: 3.5 mm Sheet thickness min.: 0.5 mm Punch head force max.: 4 presses with max. force of 7 t & 4 presses with max. force of 26 t Force of the lower cylinder max.: 6 t Double-punch punching force: 12 t (2 hydraulic punches) Length of the input sheet min.: 370 mm Length of the input sheet max.: 3,048 mm Width of the input sheet min.: 300 mm Width of the input sheet max.: 1,524 mm Diagonal of the input sheet max.: 3,408 mm Length of the output sheet min.: 250 mm Length of the output sheet max.: 3,048 mm Width of the output sheet min.: 60 mm Width of the output sheet max.: 1,524 mm Vertical travel of the scissor lift table: 550 mm Usable load capacity of the scissor lift table: 5,000 kg Dimensions of the transportable stack of sheets min.: 300 x 100 mm MACHINE DETAILS Electrical data Voltage: 380 V Frequency: 50 Hz Current: 119 A Rated power: 61 kW Cooling capacity of the unit: 32.2 kW EQUIPMENT Scissor lift table TC27155C Motorized roller bed PRL3814F Universal destacking device DUF15 Punch head H2 Oil-dynamic hydraulic unit C1515 (3-part pump unit) Lower cylinder EI09 Double rotating punch P2R36 Water-air cooling unit R121 Refrigerant R407C Software RIO Control and management system MMACHNT-MICROMach Processor PENTIUM INTEL II 400 Mhz WINDOWS NT Documentation The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day or part thereof will be charged. The fee must be paid before collection. The sale is made with the exclusion of any guarantee or warranty. The information on the technical data comes from the original offer. No liability is accepted for typing or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, 3 pcs. BIHLER slide units for BIHLER GRM 80 / MC 82 Ledpfozxt I Asx Abyehl

Condition: used, Engine and transmission for GRM 80 – according to the previous owner, the transmission was overhauled and has not been used since. ATTENTION!! This offer includes only the engine and transmission! Lhsdpfx Abozw I Hqsyjl

Condition: used, Year of construction: 1990, pressure 35 t Lodpfeztf Anjx Abyohl no. of strokes ca 72 Hub/min dayligth 195 mm total power requirement 1,5 kW weight of the machine ca. 330-400 kg

Condition: used, Year of construction: 1994, Product information "Boschert Hydraulic CNC Punching Machine" Type / Model: Boschert EL 750 digital Condition: Used Year of manufacture: 1994 Technical data Lhedpfezp Raqsx Abyjl Working area & dimensions Overhang (Y-axis): 750 mm Travel range (X-axis): 1500 mm Max. sheet size (without repositioning): 720 x 1700 mm Performance data & capacity Max. hydraulic punching force: Standard 280 kN Max. sheet thickness*: up to 12.7 mm Max. punching diameter: Ø 105 mm Stroke rate: max. 100 strokes/min Tooling: Original Trumpf® tool system Positioning accuracy with 2-axis digital display: ± 0.1 mm Connection power: 4 kVA Control voltage: 220 V Required fuse rating: 3 x 16 A Installation dimensions (W x D x H): approx. 3400 mm x 1580 mm x 1600 mm Weight: approx. 3400 kg Equipment - includes various tools / accessories * Material-dependent, usually designed for thin sheet metal up to 6 mm at full diameter or any shape that fits into a circle of Ø 105 mm Inquiry item: Transportation costs in individual offer.

Condition: like new (used), functionality: fully functional, Sheet Metal Perforating Line – For Sale Complete sheet metal perforating line manufactured by Sacform, suitable for perforating sheet metal and coils up to 1,200 mm wide. The line includes: Decoiler Feeder Perforating press - 1,200 mm width 2 punching dies: Die 1: 3×300 (2 mm hole diameter) Die 2: 1×1,200 (3 mm hole diameter) Ljdpozix Atjfx Abyehl Pull-through cutting table Recoiler

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Portal robot MC30 Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Ljdpfx Abszh I Iisyehl Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bending center P4Xe-3125 Upper bending die LS Lower bending die LI Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Additional videos and detailed images of the system are available on request!

Condition: used, functionality: fully functional, USED PROFILE BENDING ROLL BENDER - SOMO SHAFTS UP TO 105mm. WEIGHT 5000 KG. Ledpfozh D T Iex Abyshl

Condition: used, Year of construction: 2016, functionality: fully functional, Complete medium-frequency resistance welding system, manufactured 2016, consisting of the B 5000 inverter control cabinet (S/N 29636) paired with the Bihler ET 70 welding transformer (70 kVA, S/N 82641). Both units are year-matched and original to each other. MF 5000 digital welding controller with 14" color display, closed-loop current/power/energy regulation, tool management, production data logging (PDE/MDA), and NC axis interface. Frequency adjustable 1,000–5,000 Hz. Original operating manual included. Manufacturer: Otto Bihler Maschinenfabrik GmbH & Co. KG, Type: B 5000 Lhodpfx Abezgw I Aeyjl Serial No.: 82641 Year: 2016 Power supply: 400 V, 3-phase, 50 Hz Control voltage: 24 VDC Total connected load: 50 kVA (standard); max. fuse 125 A Inverter frequency: adjustable 1,000–5,000 Hz in steps Short-circuit switching capacity: 6 kA CE marked Welding Transformer — Nameplate Data Type: ET 70.0.G-10000/4 Rated power at 50% duty cycle: 70 kVA Secondary voltage (U₂₀): 4 V, up to 3 V (U₂ₙ), stepped (4 tap positions) Input voltage: 500 V / 1000 Hz Secondary current at 50% ED (Iₙ): 10 kA (rated), cos φ: 0.9 Short-circuit voltage (Uₖ): 5% Short-circuit current (Iₖ): 10 kA Cooling flow: 6 l/min Insulation class: F

Condition: ready for operation (used), Year of construction: 2024, workpiece length (max.): 750 mm, workpiece width (max.): 530 mm, workpiece height (max.): 6 mm, The machine has already been dismantled by a specialist company and placed in storage. TECHNICAL DETAILS Lhodpfxjzb Iihe Abyol Punching width max.: 530 mm Punching length max.: 750 mm Material thickness max.: 6 mm EQUIPMENT PC workstation DZDV-PC-TOUCHSCREEN PC 32" 9970460-20 incl. console Hot foil stamping/embossing system SLEEKING System HAK 100/Brother Note: Accessories are sold as is, without warranty. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 59,000 h, functionality: fully functional, punching force: 18 t, working width: 1,270 mm, working height: 2,540 mm, punching diameter: 76 mm, sheet thickness (max.): 6 mm, TECHNICAL DETAILS Working area: 2,540 x 1,270 mm Punching force: 18 t Sheet thickness: max. 6.4 mm Workpiece weight: max. 150 kg Punching diameter: max. 76.2 mm Speed: max. 90/60/108 m/min Accuracy: 0.1 mm MACHINE DETAILS Control system: Bosch Type 3 Ledjy U Ub Sopfx Abyjhl Length: 5,500 mm Width: 5,900 mm Height: 2,200 mm Weight: 11,400 kg EQUIPMENT - Sturdy, easily accessible C-frame - Coordinate guidance for highly precise machining - Linear magazine with 19 tool stations - 2 clamping devices - Drives with maintenance-free AC servo motors - Follow-up device with programmable dwell function - Ball tables - Partial slide 180 x 200 mm - 2 finished parts containers - Chip container - Automatic shut-down

Condition: good (used), Year of construction: 2002, functionality: fully functional, punching force: 20 t, TECHNICAL DETAILS Machine capacity: 200 kN (20 t) Air pressure: 5 bar Air flow rate: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travelling ranges: Machine travel range without repositioning: 1,250 mm x 2,100 mm Processing Max. sheet thickness with ball bearing table: 6 mm Max. sheet thickness with brush table: 3 mm Max. weight per table: 100 kg Accuracy Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling cycle, feed 1 mm: X920 / Y920 Tools Minimum programmable step: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Lhedpfxoy Symuj Abyel Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Condition: ready for operation (used), Year of construction: 2010, overall weight: 23,000 kg, punching force: 31 t, controller manufacturer: SIEMENS, sheet thickness (max.): 6 mm, number of axes: 11, This 11-axis Finn-Power SG6 12.61 was manufactured in 2010. It features a maximum punching force of 300 kN and can handle sheet thicknesses up to 6 mm. The machine includes a thick turret with 20 stations and an integrated CNC right-angle shear for efficient part separation. If you are looking to get high-quality punching capabilities, consider the Finn-Power SG6 12.61 punching and bending machine we have for sale. Contact us for further details. • Max. punching diameter: approx. 88.9 mm (in 3 mm steel) • Punching speed: up to 600 hpm (short pitch) • Positioning accuracy: ±0.1 mm • Max. sheet size: 1500 x 2500 mm • Automatic repositioning: yes, via CNC clamps • Number of clamps: 2 (with intelligent repositioning) • Loading/unloading capability: manual or automatic (configuration dependent) • Turret: Thick Turret / Trumpf style • Number of stations: 20 Lsdpfsy H Iluox Abyohl • Integrated shear: CNC right-angle shear • Shearing capacity: up to 6 mm (mild steel) • Process advantage: part separation without micro-joints or secondary operations • Edge quality: superior to traditional nibbling • Control unit: Finn-Power / Siemens • Software: NC Express / Tulus • Functions: automatic nesting; optimized punching and shearing sequences • Diagnostics: self-diagnostics and assisted maintenance

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, pressing force: 32 t, working height: 200 mm, controller model: Siemens 840D, working length: 2,150 mm, TECHNICAL DETAILS Bending length: 2,150 mm Maximum bending height: 200 mm Minimum length/width between bends: 160–350 mm Pressing force: 32 t Lsdey D Ihwepfx Abyjhl MACHINE DETAILS Control: Siemens 840D Dimensions & Weight Dimensions (L x W x H): 8,500 x 7,000 x 2,850 mm Weight: 30,000 kg EQUIPMENT Automatic tool changer Manipulator Reverse bending cycle Sheet centering system Additional top tools Loading and unloading system

Condition: ready for operation (used), Year of construction: 2006, operating hours: 12,500 h, functionality: fully functional, machine/vehicle number: FP3155-406/2006, working width: 1,500 mm, working height: 200 mm, sheet thickness aluminum (max.): 4 mm, working length: 2,850 mm, TECHNICAL DETAILS Maximum sheet length: 2,850 mm Minimum sheet length: 370 mm Maximum bending height: 200 mm Minimum sheet width: 180 mm Maximum sheet width: 1,500 mm Minimum material thickness: 0.5 mm Maximum material thickness (aluminium): 4 mm Maximum material thickness (steel): 3.2 mm Lhodpfxjyx Tlde Abysl Maximum material thickness (stainless steel): 2.2 mm Minimum distance between bends (length): 350 mm Minimum distance between bends (width): 160 mm Number of bends per side: 20 Maximum plate diagonal: 3,000 mm Angle tolerances: ± 40° C Bending angle: 0.2° C Bending tolerance: ± 0.2 mm Straightness and parallelism: 0.6 mm Minimum external bending radius: 1.5.../2 mm MACHINE DETAILS Compressed air: 6 bar Total connected load: 66 kW Main switch: 160 A Operating hours: approx. 12,500 h The seller can offer transport, on-site installation at the buyer’s location, and machine training for an additional fee.

Condition: used, Year of construction: 2004, sheet width 1000 mm plate length 2000 mm plate thickness 6 mm Punching capacity 280 kN Control Boschert connected load 18 kVA fuse 3 x 20 A total power requirement 15 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 2,8 x 2,0 m Multi-tool Lhsdsyi Hpcjpfx Abyol various stamps / dies Software / Dongle Metalix cncKad V10

Condition: used, Year of construction: 1997, Technical details: sheet width: 3050 mm plate thickness: 16 mm pre-bending: 12 distance between columns: 5200 mm roll dia. top roll: 330 mm roll dia. bottom roll: 360 mm Lodsyh D Nnspfx Abyohl Total power requirement: 15 kW weight of the machine ca.: 18,0 t dimension machine approx.LxWxH: 5,3 x 2,4 x 2,0 m For cone bending, approximately 70% of the maximum plate thickness applicable to standard round rolling can be processed. For truncated cone rolling, a maximum plate thickness of approx. 8 mm can be processed. *

Condition: new, Year of construction: 2019, functionality: fully functional, BIHLER cards for BIHLER controls: 1 pce. BIHLER # 800-97-0355.1 1 pce. BIHLER # 800-97-0356.1 1 pce. BIHLER # 800-97-0357.1 1 pce BIHLER # 800-97-0358.1 1 pce BIHLER # 800-97-0465.1 1 pce BIHLER # 800-97-0467.1 1 pce BIHLER # 800-97-0613.1 1 pce BIHLER # 800-97-0614.1 Lsdpfx Ajx U D S Hobyohl 1 pce BIHLER # 800-97-0615.1 1 pce. BIHLER # 800-97-0656.1

Condition: used, Year of construction: 1999, hydraulic ja Lodjx U A Tvspfx Abyjhl 100 t weight of the machine ca. 2,9 t

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN Ledjx Tuzcepfx Abyjhl 4 Standard slide units 1 Narrow slide units 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: ready for operation (used), Year of construction: 1987, operating hours: 70,000 h, functionality: fully functional, machine/vehicle number: 21104, working range: 250 mm, feed length X-axis: 170 mm, overall weight: 1,600 kg, total height: 1,860 mm, pressing force: 7 t, total length: 2,000 mm, total width: 2,500 mm, table width: 184 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 8 A, compressed air connection: 6 bar, Bihler Automatic Machine M35 – Year of manufacture 1987 – 7 t press force – ready for operation For sale is a Bihler automatic machine, model M35, year 1987, in very good and well-maintained condition. The machine features a press force of 7 tons, a compressed air connection with 6 bar, and has approximately 70,000 operating hours. The automatic machine is fully functional and immediately ready for use. Bihler machines are renowned for their robust, long-lasting construction and reliability in industrial applications. The M35 is ideally suited for stamping, bending, and forming operations. Ljdpfxsx Tukqj Abyjhl The machine can be inspected under power in our workshop by prior appointment. Spare parts are still readily available.

Condition: ready for operation (used), Year of construction: 1979, operating hours: 70,000 h, functionality: fully functional, machine/vehicle number: 24104, working range: 250 mm, feed length X-axis: 170 mm, overall weight: 1,600 kg, total height: 1,860 mm, type of input current: three-phase, pressing force: 7 t, total length: 2,000 mm, total width: 2,500 mm, table width: 184 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 8 A, punching force: 7 t, control cabinet width: 410 mm, control cabinet length: 630 mm, control cabinet height: 1,320 mm, compressed air connection: 6 bar, With 70,000 operating hours, it has certainly seen considerable use, but this is not an unusual figure for machines of this type in industrial operation – many remain productive for years with far higher hours if they are properly maintained. Full functionality is assured – the drive has been replaced once. On the positive side, the machine is fully operational, proven in industrial environments, robust, and there are still many spare parts available for older Bihler machines. Lodpox Ttb Uefx Abyohl

Condition: excellent (used), Year of construction: 1995, Control cabinet für Thread forming unit BIHLER GSE 4.1 Thread dimameter range: M 3- M 8 Spindle stroke: max: 15 mm Lhjdpfox Rrqiox Abysl Roduction rate: max. 120/min

Condition: excellent (used), Year of construction: 1986, plate thickness 5 mm sheet width 40 mm Lhjdpfx Abexzk I Soysl