Dach- und Holzbau Schmidt GmbH & Co. KG

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: P260713253, 𝘼𝙪𝙩𝙤𝙢𝙖𝙩𝙞𝙘 𝘿𝙤𝙪𝙗𝙡𝙚-𝙀𝙣𝙙 𝙋𝙧𝙤𝙛𝙞𝙡𝙞𝙣𝙜 𝙇𝙞𝙣𝙚 𝙛𝙤𝙧 𝙋𝙖𝙧𝙦𝙪𝙚𝙩 𝙁𝙡𝙤𝙤𝙧𝙞𝙣𝙜 1. 𝗚𝗲𝗻𝗲𝗿𝗮𝗹 𝗜𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 • HOMAG OPTIMAT FRP225/7/10PL/L – Longitudinal Profiling Machine • HOMAG OPTIMAT FRP226/5/5PL/Q – Cross Profiling Machine Automatic, high-speed double-end profiling line designed for the production of solid wood, engineered wood, and laminate flooring. The line performs precision machining on all four edges, including tongue-and-groove and click-locking profiles. 2. 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀 𝗣𝗿𝗼𝗰𝗲𝘀𝘀𝗲𝗱 • Solid hardwood flooring • Engineered wood flooring • Laminate flooring • Multi-layer parquet • Decorative flooring panels 3. 𝗠𝗮𝗶𝗻 𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻 Parameter Specification Machine Type Double-End Tenoner / Profiling Line Longitudinal Machine HOMAG FRP225 Cross Machine HOMAG FRP226 Maximum Feed Speed Up to 80 m/min Working Principle Continuous automatic feed Number of Working Units 7 (FRP225) + 5 (FRP226) Total Working Units 12 Production Mode Continuous 4. 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗖𝗮𝗽𝗮𝗰𝗶𝘁𝘆 Parameter Typical Range Thickness 5–25 mm Width Customer-specific configuration Length Customer-specific configuration 5. 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗢𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻𝘀 The line is capable of performing: • Longitudinal profiling • Cross-end profiling • Tongue machining • Groove machining • Click profile machining (depending on tooling) • Micro-bevel production • Relief grooves • Edge trimming • Sizing and calibration • Four-side profiling 6. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝗳𝗶𝗴𝘂𝗿𝗮𝘁𝗶𝗼𝗻 HOMAG FRP225 Function • Longitudinal edge profiling Configuration • Six machining units • High-frequency spindle motors • Precision side guides • Automatic pressure system • Heavy-duty chain conveyor HOMAG FRP226 Function • Cross-end profiling Configuration • Four machining units • Automatic synchronization with FRP225 • Precision positioning system • High-speed transfer conveyor 7. 𝗗𝗿𝗶𝘃𝗲 𝗦𝘆𝘀𝘁𝗲𝗺 • High-frequency spindle motors • Variable-speed feed drive • Precision chain transport system • Pneumatic pressure rollers • Servo-controlled positioning (depending on machine version) 8. 𝗧𝗼𝗼𝗹𝗶𝗻𝗴 • Leitz • Leuco • Kanefusa • AKE • Tigra Typical tooling: • Profile cutters • Grooving cutters • Chamfer cutters • Relief cutters • Diamond tooling (PCD) 9. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 • Siemens PLC control system • Frequency-controlled spindle drives • Digital machine diagnostics • Electronic feed speed adjustment 10. 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 Parameter Typical Value Feed Speed Up to 80 m/min Production Capacity Approximately 1,500–4,000 m² per shift* 11. 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗟𝗶𝗻𝗲 𝗟𝗮𝘆𝗼𝘂𝘁 1. Automatic infeed system 2. HOMAG FRP225 longitudinal profiler 3. Automatic transfer section 4. HOMAG FRP226 cross profiler 5. Inspection station 6. Automatic stacker Kdjdjzmrw Sspfx Aahep 12. 𝗠𝗮𝗶𝗻 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 • High dimensional accuracy • Excellent profile repeatability • High production speed • Fast tooling changeover • Continuous automatic operation • Suitable for traditional tongue-and-groove and modern click systems • Reliable industrial design for high-volume production 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 • Solid parquet flooring • Engineered flooring • Laminate flooring • Luxury wood flooring • High-precision click flooring systems

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 12636, Manufacturer: HUNDEGGER Type: K2I 450 Cross-Cutting Line Year of Manufacture: 2015 Machine Number: 12636 Processing Dimensions: 300 x 450 Kdedpfx Aaezl Nlkshep Frame Length: 13.56 m Wood Processing Width: 300 x 450 Paint Color: RAL 5012 light blue Max. Lumber Input Length: 13.0 m Max. Lumber Output Length: 13.0 m ABM-B2 Undercarriage Swivel Miter Saw 11kW - Saw Blade 800 ABM-3050 5-Axis Universal Milling Head ABM-3200 Log House Milling Machine 4 x 5.5 kW ABM-3220 Upgrade Motors for Log House Milling Machine 4 x 7.5kW ABM-B4 Combination Support for Vertically Operating Tools ABM-B5 Drilling Unit 2.2 kW vertical ABM-B6 Combination Support for Horizontally Operating Tools ABM-5130 Drilling Unit 3.0 kW horizontal ABM-B8 Marking Device, rear ABM-B9 Fully Automatic Beam Turning Station left/right ABM-B10 PWs including Standard Frame ABM-B14 Safety Devices and Guardrails ABM-1500 Refined Wood Stacking Area ABM-B11 Electronic Control ABM-9990 Tool BHF ABM-B1 AQF 5 Strands with Feeder and Wood Stacking ABM-B12 Outfeed Roller Conveyor (2.65m) + Ejector ABM-B13 5-Arm Stacking Table ABM-2000 Extension AQF and Feeder - to 6 Strands ABM-8210 Roller Conveyor without Drive Slitting Machine (8 x 630 mm) Drilling Unit, swivel 45° (3.0 kW) - Drilling Direction Horizontal

Condition: excellent (used), Year of construction: 1988, complete system with roller table. Kdodpfezk Rmasx Aahep

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Techno Fast CNC-controlled cutting system with 6 interpolating axes and a 12 kW double milling head, liquid-cooled. Working area: 620 x 280 mm, length 13.5 m. Automatic tool changer with 13 tool positions. Chain milling unit. Label printer. Marker. Ksdpfxszh U Txo Aahodp Available for immediate delivery. Commissioning and training can be arranged.

Condition: used, Long table Kdodpfxszhgzhs Aahjp 5.5 kW motor Trainer 3 rollers 380V

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting width (max.): 450 mm, working length: 16,000 mm, working width: 450 mm, Equipment: safety light barrier, A well-maintained Hundegger K2 cutting machine with a planer is offered for sale. The machine is fully functional and has been serviced several times a year by Hundegger. The machine is still in operation until the beginning of November and can then be dismantled by the buyer. Kdedpfx Aaszb I Iwohjp =Equipment: = Machine type K2-5-450 - Wood length, feed and discharge max. 16m - Color RAL 5012 blue - Feed cross conveyor, 6 strands, horizontal, 2.2 m with flat belt chains - Extendable wood discharge - Undercarriage swivel miter saw - Universal milling cutter, 5-axis UFS (roller cutter, finger cutter, dovetail cutter) - Combination support for vertically operating tools (finger cutter, drilling unit 2.2kW) - Combination support for horizontally operating tools (drilling unit 2.2kW, drilling unit 2.2kW) - Marking device at the front - Discharge table, 6-arm - Beam turning station, hydraulic - Enhanced wood support surfaces (the vulnerable plastic coating has been replaced with maintenance-free stainless steel, chrome-plated tables, stainless steel rollers) - Extension roller conveyor, 10m with feed roller - Transfer cross conveyor, 7 strands, 3.5m with flat belt chain - Connection to planer HMD = Planer HMD - Fully automatic 4-sided planing and chamfering - Planer motors 7kW - Automatic thickness planer adjustment - Direct planer control - Planer machine directly integrated after the cutting machine = Other - Inspection possible by appointment. - If the machine is being dismantled, it can of course also be inspected in the operating environment. - A new K2 with a planer and comparable equipment costs approximately 800,000 euros. - New spare parts in stock can be included at a favorable price. - The machine runs perfectly, however, no guarantee or liability is assumed for future damages. - Ideal machine for medium to large carpentry or sawmill operations. = Contact - Friedrich Hirsch GmbH - Schwaig 2, 3351 Weistrach, Lower Austria - Managing Director and Owner: Friedrich Hirsch - If you have any questions, please call us from Monday to Friday from 7:00 a.m. to 12:00 p.m. and from 1:00 p.m. to 5:00 p.m. or send an email at any time. - Unfortunately, I cannot provide a mobile phone number, as the advertisement would otherwise be blocked.

Condition: new, Year of construction: 2024, sorting line trimmer Kedpfxozbxxyo Aahsdp

Condition: used, Year of construction: 2000, machine/vehicle number: 11197, Hundegger K2-450 Cutting Machine – Year of Manufacture 2000 For sale is a used Hundegger K2-450 cutting machine, manufactured in 2000, from an ongoing operation. The machine was used for processing wooden components in timber frame and timber house construction and is currently located at Norges Hus Nova OÜ in Perila, Estonia. The machine can be inspected in operation by appointment. Technical Data: Manufacturer: Hundegger Model: K2-450 Kedpfx Aaszbnkfjhodp Year of Manufacture: 2000 Machine No.: 11197 Condition: Used Location: Kuivati tee 10, Perila, Harju County, Estonia Equipment / Notes: Complete infeed and outfeed system available Machine used in a production environment until recently Sale due to modernization or restructuring of production Dismantling and loading upon agreement On-site inspection is highly recommended The machine is ideal for carpentry workshops, timber construction companies, and businesses in the cutting field that are looking for a proven and robust Hundegger machine. We are available to provide further information, technical details, additional images, or to arrange an inspection appointment.

Condition: used, functionality: fully functional, The WMS120 multi-function portal is a CNC machine for the automated processing of wooden elements (walls, roofs, and ceilings). Machine length (X-axis): approx. 3,000 mm Machine width (Y-axis): approx. 6,200 mm Machine height (Z-axis): approx. 3,000 mm Processable element width: approx. 3,400 mm Tool set for the WMS tool changer, consisting of: Kjdpfoza D Taox Aahsdp - 1x universal roughing cutter - 1x sawing unit - Marking unit with ballpoint pen technology Clamping and assembly units 2+2 clamping devices, Haubold - 2024 new PC with Windows 10

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale: Hundegger SC 480 Speed-Cut – Year 2023 We are selling our fully automatic cutting system, the Hundegger SC 480 Speed-Cut, from 2023. Machine equipment (excerpt): - SC 480 Fully automatic cutting system, base machine with 5-axis sawing unit – mirrored version - Hundegger production software CAMBIUM - Line laser for component referencing - Infeed and outfeed cross conveyor 10.1 m, 7 strands (for timber lengths up to 13 m) Kdjdpfxsza Dzdo Aahjp - Hydraulic lifting table for timber length 13 m (6 t) - Vertical finger milling cutter 6.5 kW and 10 kW HSK spindle - 4-axis revolver milling cutter 7.5 kW universal unit - Drilling unit 3.0 kW hydropneumatic - Grooving unit - Inkjet labeling system (max. 101.6 mm) - Label printer system on the component discharge area - Discharge table, pneumatic, for timber lengths up to 13 m - Central lubrication system - Various other options and units General: Year of manufacture: 2023 Operating hours: low (machine from ongoing operation) Regularly maintained by Hundegger Condition: very good Contact: Philipp Schöb, Schöb AG, Haagerstrasse 80, 9473 Gams

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 2024-A00280, feed length X-axis: 10,000 mm, feed length Y-axis: 4,000 mm, feed length Z-axis: 100 mm, warranty duration: 12 months, total length: 11,000 mm, total height: 2,000 mm, total width: 4,500 mm, overall weight: 2,500 kg, type of input current: three-phase, Equipment: CE marking, Semi-automatic framing machine for timber frame walls, max. 4000x10000mm Kdedpfx Aszap I Aeahop - Max. stud height: 220mm - 3 nailing positions along the height - 2 BEA nail guns, strip-fed nails - Wall length production: 1000mm to 10000mm - Wall width production: 600mm to 4000mm - Wall height production: 120mm to 220mm - 2 independent nailing stations (no beams) - HIWIN rail and guide system - LENZE motor - LENZE PLC - Human-Machine Interface (HMI) - Control panel - Manufacturer's warranty: 12 months - Installation and commissioning possible

Condition: good (used), Year of construction: 2001, functionality: fully functional, double-head cutter with pre-scoring, chipping, 4 milling cutters, and edge finishing belt for both the right and left sides. Kdjdpfxoy U Inxs Aahjp Maximum working width: 2500 mm.

Condition: new, Year of construction: 2023, Walter TD500 KBA prism machine for sale. It was only unpacked for the photo and has never been operated. Purchased for a new production line that was never realized. Lower motor 22kW, upper motor 18.5kW. Can be tested on site. Kdedpfx Asy Sw T Seahjp

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 9076, cutting height (max.): 160 mm, cutting width (max.): 450 mm, power: 15 kW (20.39 HP), TECHNICAL DETAILS Max. cutting width: 450 mm Max. cutting height: 160 mm Infeed table length: 8,200 mm Outfeed table length: 8,900 mm Max. infeed length: 8,000 mm Kedpfx Aoy Nx Eqjahsdp MACHINE DETAILS Main motor power: 15 kW Power: 15.0 kW Control: Windows 10 Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 23,000 x 5,200 x 2,700 mm Weight: 8,000 kg EQUIPMENT Safety light curtain Safety fence Waste conveyor belt Label printer Marking pen

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, warranty duration: 12 months, total length: 9,200 mm, total width: 3,600 mm, overall weight: 3,500 kg, working length: 9,000 mm, BOOSTON – European Machinery Manufacturer – Buy Directly Without a Middleman! The ER-03H double-wing rotation table is a basic workstation for timber frame house prefabrication intended for medium and large companies. The rotation of the prefabricated wall is performed by lifting both table wings vertically in order to rotate the prefabricated timber frame for further processing. Both wings can be tilted from 0° to 91°, allowing rotation in both directions. The ER-03H table set can be equipped with pneumatically liftable rollers in each wing, as well as roller pins for transport, for example to a WALLTRANS receiver at an angle of 82°. Controlled via a control pendant. The first wing is used for assembling the timber frame and boarding the first side of the prefabricated element. After rotation, the second side is processed, followed by lifting the finished element vertically again. TECHNICAL DATA: Working table length: 9000 mm Kdjdpfoy Ippdjx Aahjp Working table height: 700 mm * Working width of table – wing no. 1: 3600 mm * Working width of table – wing no. 2: 2300 mm * Prefabricated wall height range when using SD-01 clamping cylinders: 500–3400 mm * Adjustable vertical pins * Mounting holes for SD-01 clamping cylinders * Horizontal transport in ER-03H-R version (optional extra) 3 rows of pneumatically liftable rollers (8 BAR) – wing 1 2 rows of pneumatically liftable rollers (8 BAR) – wing 2 * Table drive: Hydraulic * Maximum load capacity for walls with height of 3000 mm: 2500 kg

Condition: used, Year of construction: 2004, Colour: Blue Weight: 8.000 kg Price: On request - Details: - └ Description: Available by 05-2026 (depending on delivery of new machine) - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 9076 - Main motor power: 15 - Control system: Windows 10 - Max. saw width: 450 - Max. saw height: 160 - Infeed table length: 8200 - Outfeed table length: 8900 - Max. infeed length: 8000 Kdsdpfx Asyy Nnqjahjp - Opstellengte [mm]: 23000 - Opstelbreedte [mm]: 5200 - Opstelhoogte [mm]: 2700 - Veiligheidsvoorziening: Safety light curtain, Enclosed fence - Options: Waste conveyor belt, Label printer, Marking pen - Fuse [A]: 63 - Power [kW]: 15.0 - Transport weight [kg]: 8000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, cutting height (max.): 740 mm, power of the milling unit: 5,000 W, cutting width (max.): 650 mm, control cabinet width: 1,500 mm, saw blade diameter: 740 mm, rotational speed (min.): 1,600 rpm, rotational speed (max.): 1,600 rpm, power: 30 kW (40.79 HP), working length: 12,000 mm, working width: 650 mm, type of input current: three-phase, Equipment: safety light barrier, Fezer joinery line Kdsdpfx Aasyyx Dnehep

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, working width: 1,100 mm, We are offering this refurbished twin-belt calibrating machine SbF by ING STEFANI WK - 558, year of manufacture 1997, working width 110 cm. Ksdpfsyxn Dbsx Aahsdp If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Technical Description of the Lumber Repackaging Line Purpose of the equipment: The line is designed for automated repackaging of lumber, offering the following operations: - Dismantling of kiln-dried (stickered) packs - Formation of transport (shipping) packs without stickers - Reverse repackaging of transport packs into kiln-dried packs with stickers Functional features of the line: - Automatic feeding of lumber packs - Layer-by-layer dismantling of packs with separation of stickers - Accumulation and formation of new packs according to specified parameters - Automatic placement of stickers during the formation of kiln-dried packs - Adjustable pack dimensions (width, height, length) Kdodsywaxzepfx Aahop - Integration with sorting and lumber conveying systems - Capability for continuous operation Processed material: - Softwood and hardwood lumber - Thickness: 16–80 mm - Width: 75–250 mm - Length: 3,000–6,000 mm.

Condition: excellent (used), 4 spindles: bottom/right/left/top Chromed tables Working width: 130 mm Working height: 100 mm Kdedpfx Aasylv S Sohjp Feed speed regulated by inverter up to 36 m/min Spindle diameter: φ40 mm Total power: 16.8 kW Year of manufacture: 2021 Weight: 2550 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, working width: 450 mm, Equipment: safety light barrier, TECHNICAL DETAILS Working width: 450 mm (limited processing up to 520 mm possible) EQUIPMENT - Safety light barrier Ksdpfeyfhi Nox Aahjdp - Saw - Universal milling unit with roller cutter - Dovetail cutter - Finger joint cutter - Drilling units: 1x horizontal + 2x vertical - Slotting device - Marker on stop side - Automatic beam turning station - Wood length is now processed in the feed up to 16m - Control computer with EKP program included

Condition: used, Year of construction: 1999, functionality: fully functional, Schmidler S4 Joinery Line - 4-strand transverse infeed conveyor (inclined upwards) - Infeed roller conveyor - Edge turning device integrated in the infeed roller conveyor - Zero point detection - Electronically controlled under-table swing cross-cut saw Saw blade diameter: 710 mm Swivel angle: 360 degrees Tilt angle: 0–65 degrees - Waste wood pusher - Marking pen, horizontal (from below) and vertical (from behind) - Universal milling unit incl. finger-joint cutter and dovetail milling head - Horizontal drilling unit – rafter nail drilling device - Vertical drilling unit Ksdpfx Aaoya Dc Ishodp - Vertical profiling mill (lower position) for internal radii - Powered outfeed roller conveyor - Pneumatic push-off ruler - Transport and measuring system - Control system incl. color display Maximum workpiece dimensions: Height: 300 mm Width: 400 mm Length: approx. 12,000 mm 4-Side Planer – Schmidler Minimum workpiece dimensions: Height: 30 mm Width: 50 mm Feed speed: 9/18 m Planer shaft diameter = 140 mm 4-sided chamfering unit Infeed roller conveyor Outfeed roller conveyor with push-off ruler and storage rods Machine in good used condition, fully operational and in use. The machine can be inspected by appointment. Available for sale immediately or by arrangement.

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 24,000 kg, I am selling a Hundegger K2i carpentry centre from 2008. The machine is in very good condition and well equipped, including: - 13 m infeed table - Beam clamps with chain drive - 5-axis sawing unit with new 800 mm saw blade - 5-axis milling unit with finger cutter, new 60 mm cutter, and new dovetail cutter - Horizontal and vertical drilling - Additional end milling unit for rafter tails from underneath Kdsdpfx Aaexx T Rdjhsp - Slotting attachment with a complete set of 8 and 10 mm chains Note: The slotting attachment is rare equipment, used for the production of trusses with concealed plates. The machine is in excellent technical condition, regularly serviced, and has been in continuous operation. We are selling due to purchase of a much newer unit. Availability: immediate. We offer disassembly and installation for €10,000.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Blockhouse milling machine BL100A, completely overhauled with factory warranty For log thickness up to 140mm, construction height up to 200mm, machining length up to 9.0m • Infeed table (timing belt cross conveyor) and entry table for timber length 9m • Blockhouse milling machine BL100A – 4-side milling machine with hydro-pneumatic feed, 2x4kW / 2x3kW for cross-section approx. 140x220mm • Carbide insert tools for wall thickness approx. 40 – 100mm included • End groove milling unit 3.0kW with cutter B=21-40mm Kdodpfoxxhwlox Aahsp • Drilling device with drill guide and drill bit D=20mm • Integrated under-table crosscut saw 4.0kW, saw blade D=500mm • Workpiece clamping pneumatic, with horizontal clamping jaws • Outfeed table 9m with pusher device and material storage table 6x1.5m • Servo slider positioning system with IPC control and IITO control software • Label printer for component marking, laser printer for production list printouts • Excellent condition, factory-refurbished and fully serviced, with parts warranty, ready for operation • Price & delivery time on request. Subject to prior sale and all rights reserved

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, COMPLETE FACTORY FOR MOBILE PRODUCTION FOR SALE 1 pc AUTOMATIC ANGULAR PANEL SAW Manufacturer: HOLZMA – Germany Model: HCL 11/56/22 Serial No.: 0-241-17-0009 Year: 2001 1 pc AUTOMATIC SIZING, EDGEBANDING, AND BORING LINE INCLUDES: - BRIDGE VACUUM LOADER - AUTOMATIC SIZING AND EDGEBANDING MACHINE Manufacturer: HOMAG – Germany Model: OPTIMAT KFL 525/6/A3/15 Serial No.: 0-202-10-1687 Year: 2007 - 90-DEGREE ROLLER CONVEYOR Manufacturer: HOMAG – Germany Model: PROFI TB 10/25/12 Serial No.: 0-205-10-5100 Year: 2007 - AUTOMATIC SIZING AND EDGEBANDING MACHINE Manufacturer: HOMAG – Germany Model: OPTIMAT KFL 526/8/A3/15 Serial No.: 0-202-10-1689 Year: 2007 - ROLLER CONVEYOR Manufacturer: HOMAG – Germany Model: OPTIMAT TDL 310/25/12 Serial No.: 0-205-10-1688 Year: 2007 Kedpfxjxwt Ige Aahodp - BORING MACHINE Manufacturer: WEEKE – Germany Model: OPTIMAT BST 500 D Serial No.: 0-251-04-2754 Year: 2007 - BORING MACHINE Manufacturer: WEEKE – Germany Model: OPTIMAT BST 500 D Serial No.: 0-251-04-2755 Year: 2007 - BRIDGE VACUUM UNLOADER