MSM Recycling

Condition: excellent (used), Year of construction: 2016, operating hours: 1,030 h, Functionality: fully functional, Dixi 80 SLD baler, with lift/tilt device, semi-automatic, built in 2016 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1030 Power: 11 kW, 400 V / 32 A Filling opening: 1040 x 1110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1120 x 1120 x 1200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 3-way, manual Machine dimensions: approx. 4320 x 1830 x 2620 mm (LxWxH) Machine weight: approx. 8,000 kg Note: The press is in very good condition. The hydraulic hoses should be replaced. The operating instructions are included. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change without notice, prior sale, and cancellation at any time. Kljlhcowmcphedwzot Inspections are possible by appointment. Sales against advance payment are ex works, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2014, pressing force: 60 t, bale weight: 450 kg, DIXI 60 SLD horizontal press baler 2014 year of production Semi-automatic 60 ton press system for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra Packs foils Foams PET bottles Insulating mats and other compressible materials. Machine dimensions L x H x W approx. mm: 4150 (5080) x 1725 x 2035 Filling opening W x H (standard) mm: 990 x 1110 Machine weight approx. kg: 5420 Pressing force max. kN: 60 t / 600 kN Ironing cycle (average value) approx. s: 47 Bale size W x H x L approx. mm: 800 x 1100 x 1200 Bale weight (depending on material) approx. kg: 370-410 Binding: manual Number of ties: 3, with wire Drive power: 7.5 kW; 400V/32A Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Kjlhjwl N Hkjcdwzjlt We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, pressing force: 80 t, bale weight: 600 kg, DIXI 80 SLD horizontal press Semi-automatic press system with 80 tons of pressure for economical volume reduction of residual materials (recyclable) in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulating mats and other compressible materials. Pressure force : 80 t Electrical connection : 400 V 50 Hz; 11 kW; D-32 A (option: K-32 A) Kelhcowl N A Sedwzolt Cycle – average approx. : 35 sec Length approx. : 4,320 mm (without lifting device and pallet) Width approx. : 1,830 mm Height approx. : 2,620 mm (with hopper) Loading opening (WxD) – housing : 1,040 x 1,110 mm Bale dimensions : 1,120 x 1,120 x 1,200 mm Bale weight approx. : 500 – 600 kg Tying 4 manual, wires with quick-release eyelets Machine weight approx. 8,000 kg (without bale)

Condition: excellent (used), Year of construction: 2015, Looking for a good second-hand used machine? Then take a look at the offer of FLITS Rental & Sales. Brand: HSM Type: V-press 860 MAX Year of construction: 2015 Pressing pressure: 532 kN Voltage: 400 Max. bale weight: 430 kg (depending on the material) Bale dimensions: 120 x 110 x 85 cm Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Filling opening dimensions: 120 cm x 65 cm x 85 cm Condition: very good! Checked for operation. FLITS Rental & Sales service: with every machine we supply a bundle of binding wire (120 wires). Do you need more bundles of binding wire? Then request a free quote. FLITS Rental & Sales is your reliable partner in the sale and rental of high-quality machines for both companies and individuals. We focus on providing efficient solutions in the field of internal transport, cleaning, waste processing and working at heights. At FLITS Rental & Sales you will find an extensive range of machines that can be used in various sectors. Also look at our advertisements for: waste presses for efficient waste processing, electric pallet trucks/stackers for fast and safe internal transport, scrubbing machines for thorough and professional cleaning of floors, forklifts in various models, suitable for various working environments. Kjlhcewl Du Aodwzolt At FLITS Rental & Sales you choose speed, clarity and reliability. We think along with you, respond immediately and ensure that you quickly have the right machine. You are more than welcome to come and view the machines on location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. A visit is possible by appointment, so that we have all the time to inform you well and show you the right machines. Do you have any questions or would you like to receive a no-obligation quote? Please feel free to contact us: We are happy to help you! Waste press Paper press Cardboard press Plastic press Waste compactor Recycling Textile press Waste Waste processing

Condition: excellent (used), Year of construction: 2012, Looking for a good second-hand used machine? Then take a look at the offer of FLITS Rental & Sales. Brand: DIXI Type: 60 S Year of construction: 2012 Pressure: 60t Voltage: 400 Max. bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Fill opening dimensions: 115 cm x 80 cm deep x 55 cm high Kolswl Dtxshcdwzjlt Condition: very good! Checked for operation. FLITS Rental & Sales service: with every machine we supply a bundle of binding wire (120 wires). Do you need more bundles of binding wire? Then request a free quote. FLITS Rental & Sales is your reliable partner in the sale and rental of high-quality machines for both companies and individuals. We focus on providing efficient solutions in the field of internal transport, cleaning, waste processing and working at heights. At FLITS Rental & Sales you will find an extensive range of machines that can be used in various sectors. Also look at our advertisements for: waste presses for efficient waste processing, electric pallet trucks/stackers for fast and safe internal transport, scrubbing machines for thorough and professional cleaning of floors, forklifts in various models, suitable for various working environments. At FLITS Rental & Sales you choose speed, clarity and reliability. We think along with you, respond immediately and ensure that you quickly have the right machine. You are more than welcome to come and view the machines on location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. A visit is possible by appointment, so that we have all the time to inform you well and show you the right machines. Do you have any questions or would you like to receive a no-obligation quote? Please feel free to contact us: We are happy to help you! Waste press Paper press Cardboard press Plastic press Waste compactor Recycling Textile press Waste Waste processing DIXI

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, Austropressen AP 25 semi-automatic baler with lift-and-tilt device for MGB, built in 2020 Technical specifications: Kolhcewl A Tqjdwzjlt Manufacturer: Austropresse Type: AP 25 Year of manufacture: 2020 Pressing force: 25 t Cycle time: 35 s Drive power: 7.5 kW Filling opening: 1500 x 940 mm Baling: 3-fold, manual Bale dimensions: 1000 x 750 x 1200 mm Bale weight: 200-300 kg Machine weight: approx. 3400 kg Materials: Paper, cardboard, foil, metals, foams, etc. Note: The baler is in very good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Complete documentation is available. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change without notice, prior sale, and cancellation at any time. Viewings are possible by appointment. Sales are subject to advance payment and are ex works, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, pressing force: 48 t, HSM HL 4809 Re horizontal press. 2015 year of manufacture. The press has been serviced and painted - in very good condition. Klelhowl Ar Tjcdwzot Pressing power: 480 kN Driving power: 15 kW Voltage / Frequency: 400 V / 50 Hz Loading aperture width x Loading aperture length: 1020 x 900 mm Bale width x Bale height x Bale length: 1200 x 1100 x 750 Bale weight: 400 kg Length x Width x Height: 4340 x 2120 x 2490 Weight: 6300 kg Type of consumables: Wire Press material: Plastic film, Mixed paper, CardboardPress material Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT.

Condition: reconditioned (used), Year of construction: 1988, Functionality: fully functional, The Moros GBC15 scrap metal lid baler is in full working condition can be seen working and is available immediately ex works UK. This used machine is perfect for producing dense bales of 500mm x 200mm x variable in both ferrous and non ferrous materials. From the industry leading Moros stable the lid baler is powered by a cost effective 11Kw electric drive motor and is operated by simple manual control levers. The GBC15 scrap metal lid baler has replaceable liner plates and cutting blades on the lid and is an ideal machine for baling copper, aluminium, stainless steel, steel and lead. Klolhcdewlu Nkjwzst Market leading in its baling prowess the Moros GBC15 scrap metal lid baler can also be used for cleaning and cropping work thanks to the blades fitted along both sides of the baling lid. Baling, light shearing and all in one package – the Moros GBC15 scrap metal lid baler available immediately ex works UK !

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, Paal Likon 80/60 baler, built in 2004, very good condition Technical specifications: Manufacturer: Paal Type: Likon 80/60 Year of manufacture: 2004 Pressing force: 60 t Drive power: 75 kW Total power: 94 kW Filling opening: 1600 x 920 mm Bale dimensions: 800 x 1000 mm, length adjustable 4-way automatic tying system Throughput: 320 m³/h Throughput at 65 kg/cbm: approx. 21 t/h Klslhcswlnp Dsdwzst Bale weight: 660-1100 kg Transport dimensions: approx. 9405 x 2200 x 2500 mm (LxWxH) Machine weight: approx. 13 t Accessories: Hopper Version with a 520 l pump, 75 kW drive, for increased performance Approx. 320 cbm/h under operating conditions, including oil cooling. Materials: Paper, cardboard, foil, wood fiber, etc. The operating instructions and EC Declaration of Conformity are available in German. Note: The machine is in very good condition. It was inspected and tested by us in 28816 Stuhr, Germany. The video can be found above in the pictures, or on our website or YouTube channel. Inspections, including live inspections, are possible at any time by appointment. Upon request, we can also conduct tests with your equipment for a fee. We are happy to answer any questions about the machine by phone Monday to Thursday from 8:00 a.m. to 2:00 p.m. On Fridays, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change, prior sale, and revocable at any time. Viewings are possible by appointment. The sale is ex works, subject to advance payment, without warranty or guarantee.

Condition: used, Year of construction: 2005, operating hours: 48,623 h, Functionality: unexamined, machine/vehicle number: 29115, power: 86 kW (116.93 HP), Used, without warranty. Keljwlfyyshcdwzjlt Functional before disassembly. Stored protected from rain.

Condition: used, Year of construction: 1990, Functionality: fully functional, machine/vehicle number: 25038, bale weight: 700 kg, filling opening width: 650 mm, filling opening length: 800 mm, bale length: 1,200 mm, total width: 4,270 mm, total height: 2,000 mm, total length: 5,550 mm, type of input current: AC, bale height: 1,000 mm, bale width: 700 mm, input voltage: 380 V, electrical fuse: 75 A, Type: Paal Pacomat 1S, built in 1990 (including dust extraction) Negotiable price: upon request - after inspection Availability: immediately, the press has been professionally dismantled and stored off-site Kljlhewkhb Djcdwzot Location: Langenfeld / Rhineland (area: Düsseldorf / Cologne) The space required for the press is approximately 8 m x 6 m, height approximately 5 m (as we had it set up, see pictures below). If the dust extraction system is not installed, approximately 2 m can be saved in width. 8 m remains. The bales measure 80 x 80 cm, and the length is adjustable. The wire binding is automatic. We had bales approximately 100 - 120 cm long and weighed approximately 700 kg. The system was located in a printing plant (now closed) and was mostly used in one (few) shifts, and therefore has a low operating hourly rate. (Unfortunately, we don't have exact details, as the press is located out of the factory.) The press is equipped with an automatic twisting system, a dust extraction system from Höcker-Polytechnik, and a piping system.

Condition: good (used), Metall baler type RETEC for sale. It is suitable for soft metals like aluminium. The baler makes cubes from aluminium that are 30x30x35 cm and weigh about 26-28 kg It can produce about 45-46 cubes per hour, so it makes about 1 ton per hour. Klolhcdswkfd Aowzet

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, pressing force: 48 t, bale weight: 550 kg, HSM VK 4812 P Year of production: 2016 Fully automatic baler. The device has undergone extensive service and maintenance work by an authorized HSM service with a branch in Germany. The baler comes complete with a ramp for ejection of finished bales and stands for binding wires. Pressing force: 480 kN Drive power: 18 kW Voltage / frequency: 400 V / 50 Hz Capacity at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Total length x width x height: 6661 x 3994 x 2583 Machine weight: 10.2 t Compressed material: foil, mixed paper, cardboard, die-cutter waste Bale tying: 4-fold with wire Kolhcdswhvuyswzolt We also have other presses in stock. Transport costs depend on weight, volume and, above all, distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require telephone contact, so please inquire about transport costs and other delivery methods to contact us contact us by phone. Our contact details can be found in the seller's legal information. We sell and export worldwide, and thanks to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 413.00.003, pressing force: 60 t, bale weight: 400 kg, TECHNICAL DETAILS Pressing force: 60 t Main drive power: 9.0 kW Bales Bale dimensions (W x D x H): 1,100 x 1,100 x 800 mm Bale weight: max. 400 kg Binding: 4-fold vertical MACHINE DETAILS Machine dimensions (L x W x H): 6,500 x 1,850 x 2,800 mm Weight: approx. 8,000 kg Electrical system Operating voltage: 400 V Frequency: 50 Hz Total connected load: 28 kW Kljlhcdwjwhqf Tezst Regular maintenance keeps the baler in good working order.

Condition: used, Year of construction: 2008, Functionality: fully functional, Klanke Baler, Type KBST-110880, Year of Manufacture: 2008 Technical Specifications: Manufacturer: Klanke Type: KBST-110880 Year of Manufacture: 2008 Pressing Force: 80 t Drive Power: 2 x 30 kW Total Connected Load: 75.5 kW Capacity: max. 225 cbm/h Bale Size: 1,050 x 760 mm, Variable Length Bale Weight: 400-500 kg Baling: 4-way horizontal, automatic Transport Dimensions: 8,585 x 2,210 x 2,800 mm (L x W x H) Weight: 17,000 kg Accessories: 8 wire reel holders, bale chute Materials: Paper, cardboard, film, big bags, PET Operating Instructions, Electrical and Electronic Equipment Hydraulic diagrams are available in German. Kljlhcjwhi Utedwzjt Note: The press is in working order. A floor plate in the press box is cracked and needs to be replaced. We also recommend replacing the chain on the twister, the hydraulic hoses, and the oil filter. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. Offers are subject to change without notice, subject to prior sale, and revocable at any time. Inspections are possible by appointment. The sale is ex-works, without warranty or guarantee.

Condition: used, Year of construction: 2008, operating hours: 38,800 h, Functionality: fully functional, Macpresse MAC 111 / 1 baler, pressing force 170 t, built in 2008 Technical specifications: Manufacturer: Macpresse International S.R.L., Milan, Italy Type: MAC 111 / 1 Year of manufacture: 2008 Kolhcewgkfdedwzjlt Operating hours: 38,751 as of March Pressing force: 170 t Drive power: 2 x 55 kW Mains voltage: 400 V / 50 Hz Filling opening: 1,800 x 1,020 mm Press chamber volume: 2.7 m³ Bale size: 1,100 x 1,100 mm (H x W) Throughput / mixed paper: 30–35 t/h Binding: 5-fold horizontal Transport dimensions: approx. 11,500 x 2,300 x 2,845 mm (L x W x H) Press weight: approx. 39,000 kg Accessories: Hopper, turbulator Note: The press has just arrived at our warehouse and will be inspected and overhauled in the next few weeks. The conveyor belt shown in the photos is not included in the scope of delivery. Please note: All technical specifications refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change without notice, subject to prior sale, and revocable at any time. Inspections are possible by appointment. Sales against advance payment are ex works, without warranty or guarantee.

Condition: good (used), Year of construction: 2016, operating hours: 287 h, Functionality: fully functional, HSM baler, type HL 7009 Re, with lift-and-tilt device, built in 2016 Technical specifications: Manufacturer: HSM Type: HL 7009 Re Year of manufacture: 2016 Operating hours: 287 Pressing force: 70 t Specific pressing force: 58 N/cm² Cycle time of the lift-and-tilt device: 17 s Drive power: 11 kW Filling opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x L) Bale weight: up to 600 kg Baling: 4-way horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: Paper, cardboard Slide Note: Klelhcdowff Auowzjt The machine is in very good condition. A new, original HSM main cylinder has been installed. The press was inspected and tested by us in 28816 Stuhr, Germany. The video can be found on our website or our YouTube channel. Inspections, including live inspections, are possible at any time by appointment. Upon request, we can also conduct tests with your equipment for a fee. We are happy to answer any questions about the machine by phone Monday through Thursday from 8:00 a.m. to 2:00 p.m. On Fridays, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change without notice, subject to prior sale, and revocable at any time. Inspections are possible by appointment. Sales against advance payment are ex works, without warranty or guarantee.

Condition: used, Year of construction: 2001, power: 4 kW (5.44 HP), The Strautmann PP 1207 Baler Potential recyclable materials: Cardboard, film, PET bottles, foam, cans, electronic waste Technical details: Manufacturer: Strautmann Type: PP 1207 Bale size (LxWxH): 1200 x 700 x 800 mm Bale weight: approx. 400 - 500 kg External dimensions (LxWxH): 1844 x 1067 x 2868 mm Kolhcdwswc Rv Uezelt Transport height: 1970 mm Filling opening: 1145 x 430 mm Pressure: 580 kN Throughput: 1 - 2 bales / hour Number of belt channels: 4 Baler weight: 2200 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: indoors / outdoors Covered Noise level: under 80 dB(A) Year of construction: 2001

Condition: used, Year of construction: 2008, power: 3 kW (4.08 HP), The HSM V-Press 610 is a powerful baler for medium to large waste volumes and is ideal for commercial and industrial use. This model combines high capacity, efficiency, and reliability, enabling the efficient compaction of a wide variety of waste types. Pressing force: 120 kN Drive power: 3 kW Filling height: 655 mm Filling opening width x height: 800 x 495 mm Bale length x bale width x bale height: 800 x 600 x 600 mm Bale weight: 100 kg Width x depth x height: 1198 x 823 x 1986 mm Weight: 540 kg Related product line: V-Press Consumables: Strapping Compression material: Plastic film, mixed paper, cardboard, punching waste! PRICE ON REQUEST! Kolhowc Aa Sscdwzslt

Condition: good (used), Year of construction: 2005, power: 7 kW (9.52 HP), VERTICAL BALLER FOR SALE! Technical Information: Kelewcz Dpohcdwzslt Manufacturer: HSM Model: HSM 500 VL Pressing force: 54–540 kN Roller size: 1200 x 800 x 1200 mm Roller weight: approx. 500 kg Max. roll size approx. 1200 x 800 x 1200 mm (W x D x H) Press chamber dimensions: 1200 x 800 x 1520 mm (W x D x H) Motor: 7.5 kW Year of manufacture: 2005 Baller is ready for use! PRICE ON REQUEST!

Condition: used, Year of construction: 2005, power: 7 kW (9.52 HP), VERTICAL BALLER FOR RENT! (Rental in Lithuania, Latvia, Estonia, and Poland)! Technical Information: Manufacturer: HSM Kelhcdewcz A Ejwzjlt Model: HSM 500 VL Pressing force: 54–540 kN Roller size: 1200 x 800 x 1200 mm Roller weight: approx. 500 kg Max. roll size: approx. 1200 x 800 x 1200 mm (W x D x H) Press chamber dimensions: 1200 x 800 x 1520 mm (W x D x H) Motor: 7.5 kW Year of manufacture: 2005 PRICE ON REQUEST!

Condition: used, Year of construction: 1991, power: 2 kW (2.72 HP), HSM 45 Vertical Baler Power – 1.5 kW Year of manufacture ~ 1991 In good working condition! Kljlowczz Ishcdwzet The HSM baler is ideal for small quantities of paper, cardboard, and lightweight plastics and produces attractive bales measuring 700 mm x 500 mm x 450 mm.

Condition: used, Year of construction: 1991, power: 4 kW (5.44 HP), For sale or rent! We are selling an HSM 155VL vertical press. Kjlhcswczzusdwzelt Manufacturer: HSM Type: 155VL Year of manufacture: 1991 Motor power: 3.5 kW

Condition: used, HSM V-Press 605 waste paper baler - used The HSM baler is a compact device for reducing packaging waste by up to 95%. It is designed to compact and crush cardboard (paper sacks, waste paper, offcuts) and film (stretch film, plastic sacks). It enables them to be disposed of economically. The waste paper baler has a graphic text display informing of the machine's stage of operation and a large waste loading opening. All this contributes to the comfort of use of the baler and its easy intuitive operation. Advantages of the HSM V-Press 605 baler: - Compact size - contributes to space saving. - Crushing force of 57 kN (approx. 6 tonnes) - allows bales of up to 70 kg with dimensions of 80 x 60 x 60 cm to be formed. - Low noise level - 60.1 dB (A) - Material support claws - increases loading volume and therefore increases baling capacity. - Mechanical ejector - makes bale removal easier. - Large loading aperture - increases user comfort. - Quick and easy assembly. The offer concerns the HSM V-Press 605 waste paper baler: - Manufacturer: HSM - Product condition: used - Year of manufacture : 2018 - Model: V-Press 605 - Width: 119 cm - Depth: 81.5 cm - Height: 198 cm - Weight: 485 kg - Power: 1500 w - Voltage: 400 v Net price : €3499.00 each * I have large quantities, prices can be negotiated for larger orders. * Transport throughout Europe possible. Kjlhcswcpvaodwzjlt * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: good (used), Year of construction: 2016, Dixi 80 SLD baler, with lift/tilt device, semi-automatic, built in 2016 Kolhcdwewcnryozelt Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2016 Power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 3-way, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, carton The operating instructions and EC Declaration of Conformity are available in German. Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr, Germany. The video can be found above with the images, or on our website or YouTube channel. Inspections, including live inspections, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a fee. We are happy to answer any questions about the machine by phone Monday through Thursday from 8:00 a.m. to 2:00 p.m. On Fridays, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change without notice, subject to prior sale, and revocable at any time. Inspections are possible by appointment. Sales against advance payment are ex works, without warranty or guarantee.