Medany Trade

Condition: used, Heidelberg platen press Size 34x46 Original manual included Ijlswbqiljhccqtjtf Ready for use

Condition: good (used), Year of construction: 2002, operating hours: 9,001 h, Machine Centerline System for Quick Job Changeovers CUBE control system Ijlhcowa Eugocqtotf Introduction table Pull-lay operator side (OS) adjustable according to Centerline, with sheet control D-1 PULL GUIDE (OOS) with device for sheet presence control. Pull adjustable with Centerline references Stripping Station Upper and lower stripping equipment (pins, bars, tools, etc.) 1 lower pull-out frame (F-8) F-31 1 UPPER PULL-OUT FRAME QUICK LOCK WITH ALL ITS TOOLS F-72 1 CENTRAL PULL-OUT FRAME QUICK LOCK ON STRIPPING UNIT Various 7.000 speed/h (depending on cardboard and type of iob feature) All books, electrical scheme, manual instruction books, spare parts books and standard tools

Condition: reconditioned (used), Year of construction: 1992, Functionality: fully functional, year of last overhaul: 2025, Foil stamping machine. Cleaned, repainted, completely overhauled in the workshop. • Speed 5,000 s/h • Paper 80 g/m² • DWELL SYSTEM • Cardboard max. 2,000 g/m² • Corrugated board max. 3 mm • Size min. 350x500 mm / max. 920x1,260 mm • Cutting force 5 MN • Dimensions: Length 6.81 m, Width 6.01 m, Height 2.55 m • Net weight 24 tons • 3 foil feeders • 16 heating zones • Temperature 50º to 160º • Autoplate concept • Quick-Lock system Islhccjwaxdbjqtstf • 2 frames and chase • Non-stop feed • Non-stop delivery • Hot foil system

Condition: used, Year of construction: 1962, Format: 380 x 520 mm Equipment: Weight 3500kg Power supply 380V Ijlhccjwaud Rsqtetf Suitable for die-cutting. he set includes additional elements, a frame, a sheet for the cylinder, fillers and typographic locks.

Condition: good (used), Year of construction: 1997, Machine Polar PC Digital colour display Light beam Safety Guards Chrome central table Ijlhcowac E Njcqtotf Right side air table in high pressure laminate (formica) Left lateral triangle air table chromed Left lateral triangle air table in high-pressure laminate (formica) Peripherals Polar RA-4 with air removal Jogger (Year 2006) Polar Transomat TR130ER-4 Down loader (Year 2005) LW1000-4 Pile Lift

Condition: excellent (used), Continuous horizontal press, to compact and pack materials such as cardboard, paper, plastics and others. IMABE IBERICA brand, pressure 125TN, loading mouth 1800 * 1000mm, with blades on the top of the compaction carriage that allows cutting the excess material above the compaction tunnel. Folding compaction tunnel, both at the top and on the sides, for greater retention of the material, outlet for bullets of dimensions 1050 * 1100mm and adjustable length. Ielhev U R Agoccqtotf Automatic tying system, lateral, by 5 wires, for high production 30-35ton / hour. Fully rebuilt and revised in 2019

Condition: good (used), Year of construction: 1974, Introduction table Pull lay Iolhccjv U Hivoqtjtf Stripping Station Stripping Station Various Thickness max. 4 mm Machine elevated Speed : 5000 sh/h

Condition: good (used), Year of construction: 1968, Machine Pressure 500 Ton Machine complete with all its tools in order to work properly Islhccov Rtm Hsqtjtf Introduction table Pull lay operator side Stripping Station Stripping Station

Condition: used, Year of construction: 2002, Die-cutter Iberica JRK-105 Year: 2002 Description: Stripping unit Blanking unit Technical specifications: Maximum sheet size: 750 x 1050 mm Minimum sheet size: 350 x 400 mm Minimum paper thickness (according to quality):90 – 95 g/m2 Maximum cardboard thickness: 1.5 mm Itsljv Rci Dshccqtjf Maximum corrugated board thickness: 3 mm Maximum operational pressure: 300 T Maximum speed: 8500 sheets/hour Main drive motor with variable speed: 20 CV (15 KW) Total power installed: 43 CV (32 KW) Air required pressure: 6 KG / CM2 Machine appr. Weight: 23.600 KG Floor space occupied: length 10.10 M. width 6.26 M. height 3.30 M.

Condition: used, Year of construction: 1988, BOBST Printing Machine with 4 bottom colors anilox cilinders 120l/cm and 80l/cm TRANSFER BOBST Itslhov Ifpueccqtsf FLATBED DIE CUTTER BOBST AUTOPLATINE SPO 1600, max format 1100 mm x 1600 mm / 43.3" x 63" with 4 Bottom Printing unit and transfer Bobst * Vacuum feeder * Die cutting section * Waste elimination section * Centerline II * High pile delivery with two lifting tables * Max sheet format: 1100 mm x 1600 mm / 43.3" x 63" * Min sheet format: 520mm x 600mm / 20.5" x 23.6" * Cutting force: 400 t * Materials: E, B, C, CB, BE flutes * Max speed: 6,000 sheets/hour Possibility to sell them separately

Condition: good (used), Year of construction: 2004, operating hours: 30,981 h, Machine Platform with safety barrier Centerline system for quick job changeover Electronic device for sheet travel control Adjustable centering at the stripping Air conditioning for the electrical cabinet Gripper bars C.U.B.E. (Control Unit Bobst Electronic) for machine management Main motor with frequency variator Feeder Pile-tray with handle allowing manual lateral correction of the pile during production Pile height control at the front edge thanks to a photoelectric cell Adjustable lateral blowers with Centerline references Pile rear guide (OS and OOS sides) Safety system for lowering the pile try Suction unit with multiple adjusting C-4 NON-STOP FEEDER MANUAL DEVICE C-8 VERTICAL POSITIONING OF THE SUCTION UNIT. Eliminates manual interventions to compensate for the flatness of the pile shape Introduction table Covered with an anti-static stainless steel plate Inlet table feeder 4 front lays, adjustable in pairs with front register control 1 Pull-lay operator side (OS) adjustable according to Centerline, with sheet control 1 Double sheet detector Support plates at entry of platen station 1 Sheet-hold down device (guiding the sheets to front lays) 1 Upper frame with manual lifting device 1 Upper transport equipment for paper, paperboard and corrugated board 4 Transport belts. With lateral guidance C-5 CONTROLLABLE SHEET ARRIVAL FOR PERFECT SYNCHRONIZATION OF SHEET ARRIVAL AND REDUCTION OF MACHINE STOPPAGES Platin Grippers re-opening device Die-cutting device without band of gripper grip Equipment centering and locking Locking of the chase against the upper beam Measurement of the die-cutting force with strain gauge Itolev Ep Suohccqtjf Resocell: synthetic material supporting plate. Thickness 22.5 mm 1 Upper chase with quick locking: fixed bottom (E-3) Plate, thickness 2 mm and make-ready protection plate of syntetic material, 1 mm thickness 1 Cutting plate (E-4) E-5 COMPENSATION PLATE 4 mm thickness. it's useful for thin plate for repetetive work E 55 ADJUSTABLE SUPPORTING PLATE CENTERINGS : micromeric screws allow fine adjustment of counters mounted on the cutting plate with respect to the die (+/- 0,9 mm lengthwise and crosswise. Stripping Station 3 drawer frame system 1 Upper Stripping Frame (F-2) 1 Upper stripping equipment (F-21) required to create a waste stripping tool, including crossbars, clamps, stripper holders and stripping pins of 3, 5 and 10 mm of diameter 1 Fastening equipment for stripping die (F-22) 1 Central drawer frame (F-71) 1 Fastening equipment stripping table (F-75) 1 lower pull-out frame (F-8) 1 Lower stripping equipment (F-81) Equipment for waste stripping including crossbars, pins and supports F-31 1 UPPER PULL-OUT FRAME QUICK LOCK. It reduces stripping tool assembly times; the quick-closing device allows the tool to be changed in the machine) F-35 1 FASTENING EQUIPMENT FOR UPPER PULL-OUT FRAME QUICK LOCK DEVICE FOR STRIPPING (TO FIX STRIPPING TOOL TO THE UPPER PULL-OUT FRAME QUICK LOCK) F-72 1 CENTRAL PULL-OUT FRAME QUICK LOCK F-76 1 FASTENING EQUIPMENT FOR STRIPPING TABLE ON CENTRAL PULL-OUT FRAME QUICK LOCK It allows to equip a stripping table to install it on central pull-out frame quick-lock Delivery Pile tray in delivery Adjustable rear and side joggers with Centerline marks 1 Braking brush Pneumatically controlled adjustable front joggers 1 Pushes the sheets down, ensuring good stacking G-5 AUTOMATIC NON-STOP ON DELIVERY Conformity to standards and security Operator safety devices Gripper Bar Chain Slip Cl...

Condition: good (used), Year of construction: 1987, operating hours: 19,093 h, Feeder Universal Feeder Non-stop on feeder with swords Motorized suction head unit Pile feeder with automatic lateral moving Itjlhcov Ep R Djcqtof Introduction table Adjustable sheet synchronizer while running, allows to adapt the feeder cycle to that of the platen Feed table with 4 front lays, adjustable in pairs with front register control Feed table with "Pull" guide (OS) adjustable according to Centerline marks, with side register control PUSHING LAY FOR CORRUGATE OPPOSITE OPERATOR SIDE (OOS) Electronic double sheet device Sheet-hold down device (Introduction sheets guide in gripper) Upper frame with pneumatic lifting device D-7 REINFORCED SHEET TRANSPORT EQUIPMENT for rigid and corrugate cardboard included: Side-guided carrying straps Platin RESOCELL 22.5mm with 4mm compensation plate and 1mm metal sheet Support plate with micrometric centering of the cutting sheet for thin plates, thickness 1 mm UPPER CHASE WITH QUICK LOCKING: FIXED BOTTOM PLATE Stripping Station UPPER PULL-OUT FRAME UPPER PULL-OUT FRAME QUICK LOCK ON STRIPPING UNIT WITH ALL ITS TOOLS CENTRAL PULL-OUT FRAME QUICK LOCK ON STRIPPING UNIT WITH ALL ITS TOOLS LOWER PULL-OUT FRAME 3 points on lock system on ejection unit Blanking Station UPPER PULL-OUT FRAME QUICK LOCK ON BLANKING UNIT WITH ALL ITS TOOLS Universal lower tool for blanket SHEET BRAKES DEVICE BY "BERNOULLI" SYSTEM ON BLANKING STATION 3 points on lock system on blanking unit Various Speed 6.500 c/h All machine books, manuals and standard accessories ELEVATED 650 mm BECKER BLOWER PUMP PIAB SUCTION DEVICE Centerline system for quick job changeover Bobst-Electronic for the machine control Conveyor for automatic pallet change in delivery Wrapper device

Condition: good (used), Year of construction: 1981, operating hours: 27,629 h, Machine Step with safety barriers Centerline system for quick job changeover Electronic device for the sheet passage control Bobst-Electronic for the machine control ELEVATED 300 mm Console Centerline Feeder Ielhccqsv Ep Rwotstf Pile feeder with automatic lateral moving Non-stop on feeder with swords Motorized suction head unit Universal Feeder Introduction table synchronization to adjust the arrival of sheets to the registers Pull-lay operator side (OS) adjustable according to Centerline, with sheet control D-7 REINFORCED SHEET TRANSPORT EQUIPMENT for rigid and corrugate cardboard included: Introducers and upper belts - Upper transport elements (wide belts) Guide belt device on feeder table Stripping Station F-2 : N. 1 Upper pull-out frame Delivery Guillotine device for front trim G-5 AUTOMATIC NON-STOP ON DELIVERY Various Micrometric system with compensating plate and 1 mm small metals sheet

Condition: good (used), Year of construction: 2000, operating hours: 50,905 h, Console CUBE control system Feeder Pull lay operator side Non-stop on feeder Islhccqjv Ep Rqetetf Platin Die-cutting plate 4 mm Cutting plate with micrometric adjustment for 1 mm thin plates Stripping Station Stripping Pre make ready table 1 die-cutting upper stripping frame with Quick Lock Upper and lower stripping equipment (pins, bars, tools, etc.) Delivery Non-stop delivery with belt convey Various 7.000 speed/h (depending on cardboard and type of iob feature) Normal die cutting plate 4 mm Centerline system for quick job changeover Elevated 300 mm Centerline System for Quick Job Changeovers

Condition: good (used), Year of construction: 1986, operating hours: 76,215 h, Console Centerline Feeder Motorized suction head unit Pile feeder with automatic lateral moving Universal Feeder Non-stop on feeder with swords Introduction table Sheet-hold down device (Introduction sheets guide in gripper) Pull-lay operator side (OS) adjustable according to Centerline, with sheet control Receiving pull lay of the push lay operator side PULL LAY OPERATOR OPPOSITE SIDE (OOS) PUSHING LAY FOR CORRUGATE OPPOSITE OPERATOR SIDE (OOS) Electronic double sheet device D-7 REINFORCED SHEET TRANSPORT EQUIPMENT for rigid and corrugate cardboard included: Introducers and upper belts - Upper transport elements (wide belts) Adjustable sheet synchronizer while running, allows to adapt the feeder cycle to that of the platen Feed table with 4 front lays, adjustable in pairs with front register control Side-guided carrying straps Platin E-5 COMPENSATING PLATE. THICKNESS 4 MM. IN GROUND STEEL E-55 ADJUSTABLE SUPPORTING PLATE CENTERINGS Stripping Station 1 "GRID" UPPER PULL-OUT FRAME WITH ALL ITS STANDARD TOOLS CENTRAL PULL-OUT FRAME QUICK LOCK ON STRIPPING UNIT WITH ALL ITS TOOLS F-8 1 LOWER STRIPPING PULL-OUT FRAME WITH ALL ITS TOOLS F-22 Fastening equipment for stripping die (including crossbars and clamps) F-35 FASTENING EQUIPMENT FOR UPPER PULL-OUT FRAME QUICK LOCK DEVICE FOR STRIPPING (TO FIX STRIPPING TOOL TO THE UPPER PULL-OUT FRAME QUICK LOCK) F-2 : N. 1 Upper pull-out frame F-81 LOWER STRIPPING EQUIPMENT for waste stripping INCLUDING crossbars, pins and supports (installed on central pull-out frame F-8) Micrometric system with compensating plate and 1 mm small metals sheet Ijlhccqov Ep N Totjtf Delivery Non-stop delivery with belt convey Safety sensors in delivery Guillotine device for front trim Various Elevated 350 mm

Condition: reconditioned (used), Year of construction: 2007, operating hours: 12,565 h, Machine B-28 INSTALLATION OF THE MACHINE WITHOUT EXCAVATION B-7 PLATFORM Macchina compatible with HIGHWAY TDF VIEW System Centerline system for quick job changeover Electronic device for sheet travel control Adjustable centering on delivery Control cabinet cooling unit C.U.B.E. (Control Unit Bobst Electronic) for machine operation Main motor with frequency variator Feeder Pile tray with handle allowing manual lateral correction on the pile during production Synchronization device timing the sheet arrival against the front lays when the machine is at a standstill Pile lifting controlled by Pressfoot Rear pile guide (OS and OOS sides) Side blowers adjustable with Centerline marks Suction unit Safety system for lowering the pile try C-4 NON-STOP FEEDER MANUAL DEVICE Platin Itjlhccev Ep Nyoqtsf Grippers re-opening device (Platin) Equipment centering and locking on platin Synthetic material supporting plate on platen (Thickness 23.5 mm (0,925") E-5 COMPENSATING PLATE. THICKNESS 4 MM. IN GROUND STEEL E-55 ADJUSTABLE SUPPORTING PLATE CENTERINGS 1 Upper chase-fixed bottom (E-1) 1 Cutting plate (E-4) Stripping Station Quick locking device of the central stripping board Motorized lifting of the upper frame 1 Upper Stripping Frame (F-2) 1 Upper stripping equipment (F-21) required to create a waste stripping tool, including crossbars, clamps, stripper holders and stripping pins of 3, 5 and 10 mm of diameter Fastening equipment for stripping die (F-22) 1 Adaption material for stripping board on the central frame (quick locking) (F-76) 1 lower pull-out frame (F-8) 1 Lower stripping equipment (F-81) Equipment for waste stripping including crossbars, pins and supports F-31 UPPER PULL-OUT FRAME QUICK LOCK DEVICE FOR STRIPPING ((decreases extraction tool assembly times. the quick-closing device allows the tool to be changed in the machine) F-35 FASTENING EQUIPMENT FOR UPPER PULL-OUT FRAME QUICK LOCK DEVICE FOR STRIPPING (TO FIX STRIPPING TOOL TO THE UPPER PULL-OUT FRAME QUICK LOCK) CENTRAL PULL-OUT FRAME QUICK LOCK ON STRIPPING UNIT WITH ALL ITS TOOLS Various The Autoplaten Presses SP 106-E are in conformity with the European Directives for the Safety and Health requirements related to its design and construction, sa well American standards UL 508 and NFPA related to industrial equipment Tavolo di introduzione Covered with an anti-static stainless steel plate Transport belts (with lateral guidance and automatic tensionning system) 4 front lays, adjustable in pairs with front register control "Pull" guide (OS) adjustable according to Centerline marks, with side register control Double sheet detector. Mechanical, integrated on pull guide (OS) Sheet-hold down device (guiding the sheets to front lays) Upper transport equipment for paper, paperboard and corrugated board C-5 SYNCHRONIZATION DEVICE TIMING THE SHEET ARRIVAL AGAINST THE FRONT LAYS WHEN THE MACHINE IS AT A STANDSTILL D-1 PULL GUIDE (OOS)

Condition: reconditioned (used), Year of construction: 1996, Various POLAR Electronic Programs Ielhov Ep Ngoccqtjtf Flat color monitor AT = AutoTrim automatic cutting waste removal Central air table chromed Side air tables chromed Triangular chromed and blowing small side tables No. 2 Knives VIDIA

Condition: good (used), Year of construction: 1992, Console Retrofit computer and software SP 126 BMA FoilMaster 2024 Computer touch screen for forwarding band control; temperature control Feeder Non-stop feeder Pull lay operator side Platin No. 1 honeycomb Itelhev Ep Najccqtjf Printing Units 16 heating zones Hot-Gold Foil System No. 3 shafts for pushing forward the bands Delivery Non-stop delivery with belt convey Various Speed 5.000 s/h Pile height Feeder max 1400 mm Delivery max 1100 mm Size min 350x500 mm / max 920x1260 mm Net weight 24 Tons Temperature from 50º to 160º All books, Manuals and Tools Dimensions Length 6,81 m Width 6,01 m Height 2.55 m Printing pressure 500 TON Paper 80/90 g/m2 - 1500 gr/m2 Elevated 350 mm

Condition: reconditioned (used), Year of construction: 1986, Feeder Iolsv Ep I Aehccqtstf Put in & remove automatic feeder Printing Units 1 frame holder forms Various CE Certificate Tankle device Electronic equipment for the control of the production cycle of hot stamping of metallized strips and electronic regulation of the working speed Complete with die-cutting and hot stamping equipment

Condition: reconditioned (used), Year of construction: 1995, Feeder Iolhcev Ep Ivecqtetf Put in & remove automatic feeder Various Resistors in the sandwich directly inside the machine does not require a heated plate Electronic equipment for the control of the production cycle of hot stamping of metallized strips and electronic regulation of the working speed Complete with die-cutting and hot stamping equipment CE Certificate

Condition: refurbished (used), Year of construction: 2017, Number of working hours 2400 h Pressure power 110000 kg Speed 2500/2700 Sheets/h On offer here is a punch with hot foil from the brand APR Solutions. The machine is offered including warranty from the manufacturer! Model: Saroglia FUB/D 56x74 - Format: 56x74 cm - Year of manufacture: 2017 - Condition: Refurbished by the manufacturer (electronics as original) - Operating hours: 2400 - Feeding and delivery: Automatic - with hot foil - Punching: Up to 5 mm thickness - Speed: 2500/2700 sheets/hour Ijlhev Dx Dwoccqtjtf - Paper weight: 80 - 1800 gr/sqm - Pressure force: 110000 kg (110 tonnes) If you require further information, please contact us at any time!

Condition: excellent (used), Year of construction: 1998, operating hours: 46,000 h, Bobst 102 CER II Master Cut Year: 1998 Sheet Size: 1020 x 720 mm - 40 x 28 inches Hours: 46000 Equipped With: Central line Stripping Unit Blanking Unit 9,000 Sheets Per Hour Ielhcov Dhciscqtjtf Non stop Feeder Non stop Delivery Made in Switzerland

Condition: reconditioned (used), Year of construction: 1988, operating hours: 1,06,000 h, Machine Centerline system for quick job changeover Bobst-Electronic for the machine control ELEVATED 650 mm OIL CONDITIONER BOX Feeder Motorized suction head unit Pile feeder with automatic lateral moving Non-stop on feeder with swords Universal Feeder synchronization to adjust the arrival of sheets to the registers Introduction table Adjustable sheet synchronizer while running, allows to adapt the feeder cycle to that of the platen Feed table with 4 front lays, adjustable in pairs with front register control Feed table with "Pull" guide (OS) adjustable according to Centerline marks, with side register control PULL LAY OPERATOR OPPOSITE SIDE (OOS) PUSHING LAY FOR CORRUGATE OPPOSITE OPERATOR SIDE (OOS) Electronic double sheet device Sheet-hold down device (Introduction sheets guide in gripper) D-7 REINFORCED SHEET TRANSPORT EQUIPMENT for rigid and corrugate cardboard included: Upper frame with pneumatic lifting device Side-guided carrying straps Itjlhccsv Davzjqtef Platin Support plate with micrometric centering of the cutting sheet for thin plates, thickness 1 mm RESOCELL 22.5mm with 4mm compensation plate and 1mm metal sheet Stripping Station 3 points on lock system on ejection unit UPPER PULL-OUT FRAME QUICK LOCK ON STRIPPING UNIT WITH ALL ITS TOOLS Blanking Station 3 points on lock system on blanking unit Universal lower tool for blanket SHEET BRAKES DEVICE BY "BERNOULLI" SYSTEM ON BLANKING STATION UPPER PULL-OUT FRAME QUICK LOCK ON BLANKING UNIT WITH ALL ITS TOOLS Delivery Wrapper for interlayer sheet infeed Conveyor for automatic pallet change in delivery Various Speed 6.500 c/h All machine books, manuals and standard accessories

Condition: reconditioned (used), Year of construction: 1999, operating hours: 62,000 h, Machine Platform with safety barrier Centerline for job quick-change Electronic double sheet control Adjustable centering at the stripping and at the delivery Air conditioning for the electrical cabinet Gripper bars Main motor with frequency variator B-41 ADDITIONAL INTERFACE "CUBE". It includes an additional screen and keyboard located on the feeder, operator side, which facilitate the management of the machine. B-1 ELEVATED MACHINE Machine elevated 415 mm, included elevation of the steps Feeder Pile-tray with handle allowing manual lateral correction of the pile during production Photocells for automatic cycle on feeder Pile height control at the front edge thanks to a photoelectric cell Pile rear guide (OS and OOS sides) Adjustable lateral blowers with Centerline references Suction unit with multiple adjusting Safety system for lowering the pile try C-4 NON-STOP FEEDER MANUAL DEVICE C-5 CONTROLLABLE SHEET ARRIVAL FOR PERFECT SYNCHRONIZATION OF SHEET ARRIVAL AND REDUCTION OF MACHINE STOPPAGES C-8 VERTICAL POSITIONING OF THE SUCTION UNIT. Eliminates manual interventions to compensate for the flatness of the pile shape Introduction table Covered with an anti-static stainless steel plate Synchronization of the sheet adjustable at the stop, allows to adapt the speed of the feeder with which of the platin Imput on table feeder 4 front lays, adjustable in pairs with front register control Pull-lay operator side (OS) adjustable according to Centerline, with sheet control Double sheet detector Support plates at entry of platen station Sheet-hold down device (guiding the sheets to front lays) Upper frame with manual lifting device Upper sheet transport equipment for paper, cardbord and corrugate cardboard to 4 mm thickness Transport belt With lateral guidance and automatic tension system D-73 FEED BELT SLOW-DOWN DEVICE Ensures smooth arrival of sheets against the front registers D-3 PUSH GUIDE (OOS opposite operator side) WITH ELECTRONIC CONTROL useful for thick carton and corrugate Platin Grippers re-opening device Die-cutting device without band of gripper grip Equipment centering and locking Locking of the chase against the upper beam Measurement of the die-cutting force with strain gauge Resocell: synthetic material supporting plate. Thickness 22.5 mm 1 Upper chase with quick locking: fixed bottom (E-3) Plate, thickness 2 mm and make-ready protection plate of syntetic material, 1 mm thickness 1 Cutting plate (E-4) E-5 COMPENSATION PLATE 4 mm thickness. it's useful for thin plate for repetetive work E-55 ADJUSTABLE SUPPORTING PLATE CENTERINGS (MICROMETRIC) Stripping Station 3 drawer frames system with micrometric adjusting 1 Upper Stripping Frame (F-2) 1 Upper stripping equipment (F-21) required to create a waste stripping tool, including crossbars, clamps, stripper holders and stripping pins of 3, 5 and 10 mm of diameter 1 Fastening equipment for stripping die (F-22) 1 Central drawer frame (F-71) 1 Fastening equipment stripping table (F-75) 1 lower pull-out frame (F-8) 1 Lower stripping equipment (F-81) Equipment for waste stripping including crossbars, pins and supports F-9 PRE-SETTING TABLE : Adjustable. Allows the preparation of a second job during production, reducing machine makeready time and increasing the time available to run production. Requires: a series of supplementary stripping tools F-31 1 UPPER PULL-OUT FRAME QUICK LOCK. It reduces stripping tool assembly times; the quick-closing device allows the tool to be cha... Itjlev Dat Hshccqtef

Condition: good (used), Year of construction: 2011, operating hours: 14,152 h, Machine Centerline system for quick job changeover Electronic device for sheet travel control Adjustable centering at the delivery Control cabinet cooling unit Bobst-Electronic machine operating system C.U.B.E. (Control Unit Bobst Electronic) This microprocessor based Bobst system allows the operator to easily control, visualize and check the various functions and elements of the machinewith color touch screen Main motor with frequency converter control 1 B-2 PLATFORM 1 PRESETTING TABLE Adjustable. It allows the stripping tools to be prepared outside the machine in perfect register with the die Ijljv A N T Tehccqtetf Feeder Pile tray wit handle allowing manul lateral correction of the pile during production Pile lifting controlled by pressfoot Real pile guides (OS and OOS) Side blowers adjustable with Centerline marks Suction unit Safety system for lowering the pile tray 1 C-111-001 MANUAL NON-STOP DEVICE Introduction table Covered with an anti-static stainless steel plate Inlet equipped with lateral ramps 4 front lays, adjustable in pairs with front register control "Pull" guide (OS) adjustable according to Centerline marks, with side register control Double sheet detector. Mechanical, integrated on pull guide (OS) Support plates at entry of platen station Sheet-hold down device (guiding the sheets to front lays) Upper frame with manual lifting device Upper transport equipment for paper, paperboard and corrugated board Transport belts (with lateral guidance and automatic tensionning system) C-140.001 CONTROLLABLE SHEET ARRIVAL FOR PERFECT SYNCHRONIZATION OF SHEET ARRIVAL AND REDUCTION OF MACHINE STOPPAGESAdjustable while running, adapting the feeder sinc to platen. Facilitates sheet feed correction to balance variation in processed materials Platin Gripper reopening device Equipment centering and locking Automatic locking of the chase against the upper beam Measurement of the cutting force with strain gauge Synthetic material supporting plate (Thickness 23.5 mm ( T-1 Upper chase : fixed bottom plate with plate, thickness 2 mm, and make-ready protection plate made of syntethic material, thinckness 1 mm. Cutting size limited to 705 x 1060 mm (27 3/4" x Cutting plate (T-12 Thickness 5 mm 1 E-1 ADJUSTABLE SUPPORTING PLATE CENTERINGS 1 E-210.001 COMPENSATING PLATE Thickness 4 mm. 1 T-1 UPPER CHASE WITH QUICK LOCKING : FIXED BOTTOM PLATE bottom sheet, 2 mm thick and synthetic shoplifting protection plate, 1 mm thick. requires a full size die 1 B- DEVICE FOR DIECUTTING IN-BETWEEN GRIPPERS (Stripping of small wast pieces is possible in front of 1st. knive (13 mm or 1/2") Stripping Station Quick locking device of the central stripping board on Waste Stripping Station Motorized lifting of the upper frame on Waste Stripping Station 1 Upper stripping pull-out frame (T-20 1 Upper stripping equipment (T-2) Equipment required to create a waste stripping tool, including crossbars, clamps, stripper holders and stripping pins of 3, 5 and 10 mm of diameter 1 Fastening equipment for stripping die (T-2 Including crossbars and clamps 1 Lower stripping pull-out frame (T.23 1 Lower stripping equipment (T-235.001) Equipment for waste stripping including crossbars, pins and supports 1 T-210.001 UPPER STRIPPING PULL-OUT FRAME QUICK-LOCKING DEVICE Reduces stripping tool assembly times. The quick-release device of the stripping tool allows the latter to be changed in the ...