SIA Rojas Siltums

Condition: used, Year of construction: 2015, operating hours: 82,000 h, functionality: fully functional, type of input current: AC, power: 220 kW (299.12 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, empty load weight: 12,500 kg, For sale: Biogas CHP unit (BHKW) Fully functional CHP unit in container (dimensions: LxWxH = 7x3x3 meters, excluding the rooftop fan, weight: 12.5 tons) The unit will be decommissioned once the two new CHP units are operational, approximately summer 2026. The CHP was operated under a service contract with IWK. The last major overhaul (turbo, pistons, liners, heads, catalyst) was carried out in May 2025 at 77,500 operating hours. Service is performed every 2,000 hours. The unit can be inspected on site and in operation. The CHP is sold as-is, without warranty, ex location. Casdox A A Sfspfx Addea Transport costs to be borne by the buyer.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 71,000 h, Mtu 16v 4000 gs l61 Year of manufacture: 2006 Operating hours: 71,000 Cajdpfx Adoxzu Upedja Voltage: 10,500V 50Hz Warranty: no Includes heat recovery unit, master control, and gas ramp train Good running condition

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, power: 1,222 kW (1,661.46 HP), overall weight: 13,550 kg, Equipment: documentation/manual, Jenbacher available in disassembled condition, ready to load. Specifications: Type: J416 GS Year of construction: 2012 Power: 1222kW Fuel: Gas Caodpfx Adsxvfc Hjdoa Frequency: 50Hz Generator: 1870kVA Operating hours: 25000 after complete overhaul Manual and logbooks available Scope of supply: Control panel, gas line, pumps QSV91 2MW also available.

Condition: used, Year of construction: 2014, functionality: fully functional, power: 55 kW (74.78 HP), rotational speed (max.): 1,500 rpm, For sale: engine for cogeneration with generator. Csdpfxoxuvame Addsaa

Condition: like new (used), Year of construction: 2017, operating hours: 10,000 h, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 400 mm, control cabinet height: 2,000 mm, rotational speed (min.): 1,500 rpm, total height: 2,000 mm, total length: 6,000 mm, total width: 1,500 mm, overall weight: 3,000 kg, type of cooling: water, warranty duration: 12 months, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, For sale is a Spanner RE2 Facelift wood gasifier with CHP unit (BHKW). Large reformer and lock with IR sensors. Everything has been fully overhauled and is ready for operation. The plant can be inspected in Brixen / South Tyrol. Codpexuqpvefx Addoaa

Condition: new, Year of construction: 2021, functionality: fully functional, input voltage: 400 V, rotational speed (max.): 1,500 rpm, fuel: domestic gas L, overall weight: 11,100 kg, input frequency: 50 Hz, input current: 1,299 A, empty load weight: 11,100 kg, Equipment: documentation/manual, For sale: New natural gas cogeneration unit. JENBACHER JMS 412 GS-N.L Gas engine: Jenbacher J412 GS-B06 (928 kW) Generator: Nidec Leroy-Somer LSA 50.2L8 C 6S/4 (400V/50Hz) Csdpfoxlr Diox Addjaa The package includes a complete Jenbacher gas engine with ignition, lubrication, and cooling systems. Also included: gas assembly (valves, regulator, filter), electrical cabinet, electrical equipment, and complete technical documentation. Operating hours: 0. Warranty: none. The engine has been inspected by an authorized service center. No issues detected. Immaculate condition. More information and photos available upon request.

Condition: excellent (used), Year of construction: 2014, operating hours: 31,347 h, functionality: fully functional, power: 800 kW (1,087.70 HP), Equipment: documentation/manual, MWM CHP plant for decentralized electricity and heat generation in electrically controlled, grid-connected operation Controllability 50-100% Technical specifications: Electrical output in kW (electrical): 800 Efficiency: Electrical: 42.3% Thermal: 45.5% Caodpfx Adoxfgxbedja Total: 87.3% Emission values: NOx 500 mg/Nm³

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Cedpfx Aexc Ni Rsddoaa

Condition: used, Year of construction: 2008, For sale, we offer an MTU combined heat and power (CHP) plant with 1.2 MW electrical output. Technical details: Manufacturer: MTU Engine: MTU 12V4000L62 Generator: Stamford Cjdpfx Adexcwlaedsaa Year of manufacture: 2008 (completely overhauled in 2015) Operating hours: 63,000 Including control cabinets Including dry cooler

Condition: used, Year of construction: 2022, operating hours: 13,500 h, functionality: fully functional, nominal power: 50 kW (67.98 HP), For sale is an HKA 49. Included are the wood gasifier, the CHP unit (BHKW), the Energy Block housing the system, and the feed screw including the complete room discharge system. Cedpfx Asw Spiqsddoaa

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, The Spanner plant consists of the cogenerator and the reformer. The reformer, the heart of the wood chip system, produces natural wood gas from wood chips through a controlled process. This gas is used to operate the cogenerator. The generated thermal energy can be used to heat buildings, drying plants or district heating networks, while the electricity is fed into the grid. Model: HK45 Electrical performance: 45 kW Thermal performance: 120 kW Wood chip consumption: 45 kg/h Requirements for wood chips: Grain size G30-G40 Caodpfx Aowvhf Tsddea Maximum moisture 15% Fine dust (

Condition: excellent (used), Used CHP Plant Manufacturer: Indop Year of manufacture: 2014 Fuel type: natural gas Electrical output: 50 kW Thermal output: 80 kW Operating hours: 28,901 h Engine type: MAN GAS ENGINE e0834 e32 (54 kW) Number of cylinders: 4 Cjdpfjwthziex Addeaa Available: 3 units Indop 50 kW at €13,400 each 2 units Indop 20 kW at €8,600 each 1 unit Energ-g 50 kW at €13,400 Test run possible.

Condition: used, Year of construction: 2003, Name: Used compact CHP module Manufacturer: Sokratherm Type: FG 114i Csdpfx Ajwhwpfeddeaa Year built: 2003 Generator: Leroy Somer Generator Type: LSA 46.2 Turbo: Yes Fuel type: Digester gas Electrical power: 114 kW Thermal power: 186 kW Efficiency: Nominal power of 95.4% Hours of operation: 57.460 hrs Driving force: 130 kW. Engine type: MAN E2876 TE 302. Combustion system: Gas-Otto engine. Number of cylinders/arrangement: 6 in line. Speed: 1500 rpm Dimensions: L 2.700 x W 950 x H 2.300 mm Empty weight: 2.750 kg Message: Electrical power: 114 kW. Thermal power: 186 kW Condition: Second hand Price: On demand

Condition: excellent (used), Year of construction: 2010, operating hours: 120 h, functionality: fully functional, power: 1,064 kW (1,446.64 HP), fuel type: gas, output frequency: 50 Hz, Jenbacher J320 GS CHP unit price includes dismantling and loading onto your trucks. Year: 2010 Power: 1064 KW Frequency: 50hz Running hours: 120k (overhaul at 100k) reports available. Currently running Casdpewd Nw Tsfx Addja Full tech data sheet available. Set in very good condition. Serviced and maintained by engineers. Contact for more info and pictures.

Condition: excellent (used), Year of construction: 2020, operating hours: 5,065 h, functionality: fully functional, power: 901 kW (1,225.02 HP), total height: 2,990 mm, total length: 12,000 mm, total width: 2,990 mm, fuel: domestic gas H, Equipment: documentation/manual, For sale is a natural gas combined heat and power (CHP) plant in containerized design and a chimney with 3 flues: Short description: CONTAINER CHP 901 kWe / 928 kWth Natural gas engine: Jenbacher J 412 GS-B06 Generator: 400V / 50 Hz / STAMFORD PE 734C Further information: - Complete CHP package in a container (12x3x3 m), super silent, color RAL7004, including mixture cooling and emergency cooling as a table cooler, outdoor glycol protection system, oxidation catalyst (Oxikat), provision for SCR system, island operation capability, Profibus DP interface, etc. - Supplied as per technical drawings, documents, P&ID diagrams, and data sheets. - Genset has completed 5,056 operating hours (operating period: 01/2021 - 12/2021). - The entire CHP plant is in excellent condition, the genset was regularly serviced under a premium service contract, and is currently under the manufacturer’s care. Cjdpfovuz Utsx Addjaa

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, input voltage: 400 V, rotational speed (min.): 1,500 rpm, warranty duration: 12 months, nominal power: 1,000 kW (1,359.62 HP), input frequency: 50 Hz, continuous power: 1,000 kW (1,359.62 HP), Gas generator or cogeneration 1000kW. 40ft container including cooling system. Engine MWM TCG 3016V16S, Generator LSA, MCB - ABB or Schneider, gas line Dungs, control system ComAp or Deiff. Delivery 30-90 days. Codpfxjvta A He Addsaa

Condition: good (used), functionality: fully functional, The machine consists of: 1. Loading conveyor belt for the sheet to be joined - Dimensions: 3200 x 2000 - Power: 2 kW 2. Lifting table - Dimensions: 3200 x 2000 - Capacity: 5000 kg - Power: 4 kW 3. Conveyor belt for loading empty pallets - Dimensions: 3200 x 2000 - Power: 2 kW 4. Empty loader for the sheet to be optimized VTSA 3800 - Length: 3200 - Feeding speed: 55 m/min - Power: 5 kW 5. Roller feeder VTSM 3800 - Length: 3200 - Power: 1.5 kW 6. Angle transmission with rollers and belts KS4 - 5400 - Length: 3200 - Width: 2000 - Power: 2+2 kW 7. Conveyor belt for aligning sheets on the side edge PKP - Length: 3000 - Power: 4 kW 8. Conveyor belt with chains for pinching the sheet - Length: 2000 Cedpfx Adsvnri Isdoaa - Power: 5.5 kW 9. Camera for reading the material to be optimized OK P - Analyzes the sheet and sends the cutting commands (head cut, tail cut, hole cut, etc., according to the parameters set by the operator) - Sheet thickness control unit 10. Pasta cutting unit - Hydraulic control 11. Group for selecting waste material (it is inserted in a belt below) 12. Splicing group with thermo-fuse wire - Number of splicing wires: 6 13. Cutter for cutting the joined sheets to size - Hydraulic control 14. Stacker for unloading the joined sheets - Length: 3200 - Width: 2000 - Power: 3 kW 15. Lift table - Length: 3200 - Width: 2000 - Load: 5000 kg - Power: 4 kW 16. Conveyor belt for unloading pallets - Length: 3200 - Width: 2000 - Power: 2 kW 17. Conveyor belt for loading empty pallets - Length: 3200 - Width: 2000 - Power: 2 kW 18. Evacuation belt for cutting waste - Power: 4 kW 19. Mechanical cutter for shredding waste

Condition: good (used), Year of construction: 2014, operating hours: 42,000 h, functionality: fully functional, 1 combined heat and power unit for natural gas (convertible to other gas types) Output: 800 KW electrical 800 KW thermal Manufacturer: G2 Engine: MWM, type TCG2016 V16C Operating hours: 42 000 Year of construction: 2014 Complete system in container (12 x 4.5 m) Casdpfxsvgbdrj Addea with all heat exchangers, switch cabinets, power supply All maintenance intervals carried out by the manufacturer. Ready for immediate use! Further details on request

Condition: like new (used), Year of construction: 2015, functionality: fully functional, type of input current: three-phase, power: 45 kW (61.18 HP), input voltage: 400 V, For sale Spanner Biomass cogenerator station with 9 units. Model - BHKW45-8,0-V1.1 Year - 2015-2017 Caedpfx Ajvcbtroddsa Nominal power - 6x45KW, 3X50KW Voltage - 400V Frequency - 50HZ Current - 3 phase Engine - 8.0L Price shown per unit. 1 unit includes: Biomass gasifier, generator that converts the gas with engine to electricity, separate control cabinets for gasifier and generator. Price is discussable. Please see attached documents. Preferred text communication via e-mail or whatsapp.

Condition: used, Year of construction: 1994, Technical details: production capacity: 2x 4,8 MW number of Generators: 2 Stück fuel tank capacity: 480 m³ type of fuel: Gas + Öl Complete Power Plant 2 combustion engines 12 cyl V -Motor Make Maschinenwerke Halberstadt Type: 12 VDG for oil and gas 2 Generators Make Leo Somer with: - electrical capacity 4,6 MW each - mechanical capacity 4,8 MW each - thermal capacity 4,8 MW each - 2 recovery boiler - Stromeinspeisung: Mittelspannung 10 KV (direkt ins Netz) furthermore: heat exchanger, catalyst, control room, medium high voltage system, oil preparation plant, intermediate storage tank + fuel depot tanks 4,8 m³ Cjdpfx Adju Nxatedjaa *

Condition: new, Year of construction: 2024, functionality: fully functional, power: 350 kW (475.87 HP), Compact, highly efficient combined heat and power unit with a state-of-the-art SCANIA V 8-cylinder, lean-burn gas turbo, 4-stroke gas Otto engine. Unit, gas pressure control system, mixture and engine water cooling circuit mounted on base frame for power and heat generation with a high-quality synchronous generator (3P, 400V, 50Hz) for mains/parallel operation and optimized heat extraction via plate heat exchanger for heating water/process heat with a temperature level of VL 85°C / RL 70°C, OPTIONAL: with catalytic converter (optional SCR system) for low-emission operation in accordance with the MCP Directive (EU) and 44th BImSchV (DE). TECHNICAL DATA GENSET /CHP - Biogas 50% CH4 Electrical output at cos φ=1: 350 kWel Cedpfxst Uu Ezs Addsaa Electrical efficiency: 41.4 % Thermal output motor at 180^exhaust gas temperature: 334 kWth Electricity coefficient el/th. : 1,05 Engine type V8 Displacement: 16 Ltr Combustion thermal output - 100% load: 845kWel Gas consumption at50%CH4: 169.1Nm³/h Length x width x height m 4.1 x 1.5 x 2.1 Weight unfilled 4500kg The CHP has a control cabinet with a display for the visualization of all relevant operating parameters including a DSL modem for remote maintenance and external monitoring, as well as an interface for control energy for connection to the Energiepilot E2M. The scope of delivery includes a mains starter to provide the optimum starting speed, as well as a gas detector, smoke detector, emergency stop switch and alarm flashing light/horn. All pipes are made of V2A and insulated where necessary. To ensure that the motors are kept warm, the installed heat pumps are programmed to start up in a set cycle, that they start up in a set cycle and thus enable the desired temperature to be maintained. An automatic gas shut-off valve for installation outside the CHP installation room is not included in the scope of delivery. The CHP unit complies with the medium-voltage directive VDE-AR-N 4110:2018-11. An automatic gas shut-off valve for installation outside the CHP installation room and all operating fluids are not included in the scope of delivery. The CHP unit is also optionally available in a container. The entire unit is also available as a natural gas version.

Condition: new, Year of construction: 2024, functionality: unexamined, power: 265 kW (360.30 HP), Compact, highly efficient combined heat and power unit with a state-of-the-art SCANIA 6-cylinder, lean-burn gas turbo, 4-stroke gas Otto engine. Unit, gas pressure control system, mixture and engine water cooling circuit mounted on base frame for power and heat generation with a high-quality synchronous generator (3P, 400V, 50Hz) for mains parallel operation and optimized heat extraction via plate heat exchanger for heating water/process heat with a temperature level of VL 90°C / RL 75°C, with catalytic converter (optional SCR system) for low-emission operation in accordance with the MCP Directive (EU) and 44th BImSchV (DE). TECHNICAL DATA GENSET /BHKW - NATURAL GAS/BIOMETHANE Electrical output at cos φ=1: 265 kWel Electrical efficiency: 41.9 % Thermal efficiency: 44.1 % Total efficiency: 86.0 % Thermal output motor: 150 kWth Thermal output at 120°C exhaust gas temperature: 129 kWth Total thermal output: 279 kWth Electricity coefficient el/th. : 0,95 LEAN TURBO NATURAL GAS / BIOMETHANE ENGINE Engine type 6R Displacement: 12,7Ltr Combustion heat output - 100% load: 632kWel Gas consumption: 63,2Nm³/h Length x width x height m 4.1 x 1.5 x 2.1 The CHP has a control cabinet with a display for the visualization of all relevant operating parameters including a DSL modem for remote maintenance and external monitoring, as well as an interface for control energy for connection to the Energiepilot E2M. The scope of delivery includes a mains starter to provide the optimum starting speed, as well as a gas detector, smoke detector, emergency stop switch and alarm flashing light/horn. All pipes are made of V2A and insulated where necessary. Casdpot E N I Sefx Addea The CHP unit complies with the medium-voltage directive VDE-AR-N 4110:2018-11. An automatic gas shut-off valve for installation outside the CHP installation room and all operating fluids are not included in the scope of delivery. The CHP unit is also optionally available in a container.

Condition: ready for operation (used), A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabinets. All generators are installed in containers and are therefore easy to transport. Caodpfx Adjtwqzrodoa

Condition: used, Year of construction: 2001, operating hours: 9,000 h, functionality: unexamined, CHP in insulated container Plant control cabinet CHP control cabinet Gas flare Agitator Emergency cooler Various pipes and small parts Caedetrfhrepfx Addja System was only in operation for 1 year See photos for condition

Condition: repair required (used), Year of construction: 2002, functionality: not functional, machine/vehicle number: 02093098, type of input current: three-phase, power: 190 kW (258.33 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas L, overall weight: 1,900 kg, type of cooling: air, nominal power (apparent): 237 kVA, input frequency: 50 Hz, operating pressure: 16 bar, Equipment: documentation/manual, With soundproof hood including control cabinet (display is dismantled and located in the control cabinet) The generator is included in the price General overhaul of the CHP system in 2022 Cajdpeq R Ri Aefx Addoa Regular maintenance/inspection until September 2023 Non-functional CHP system -> we were informed that only the turbo is defective. The system has been shut down for a year (an on-site functional test is not possible). The system has not been dismantled. Disassembly and removal are the responsibility (costs, execution) of the buyer. (Inspection is possible). We cannot provide any guarantees, and the warranty is excluded to the extent permitted by law. Collection/disassembly is possible Monday to Thursday from 7:30 a.m. to 4:00 p.m. and Friday between 7:30 a.m. and 1:00 p.m.