Kirchner Agrar- und Kommunaltechnik GmbH

Condition: used, functionality: fully functional, pressing force: 1,000 t, Cavenaghi & Ridolfi 1000-ton hydraulic press, Italian-built machine, suitable for industrial pressing operations and also used as a die tryout press. According to the nameplate, the following data is indicated: Manufacturer: Cavenaghi & Ridolfi Itsdsyuqm Nspfx Abced Location: Limbiate (Milan), Italy Series: 680429 Serial number: 2909 Pressing force: 1000 tons The machine is complete with control panel as shown in the photo.

Condition: ready for operation (used), total width: 2,600 mm, total length: 3,100 mm, passage width: 1,250 mm, empty load weight: 25,000 kg, Model: HZPUX 150/100-1250/1000 Capacity: 230T Max ram adjustment: 1100 mm Max distance between table - ram: 2250 mm Dimensions of the table: 1000 x 1250 mm dimensions stamp: 1000 x 770 mm Electric motor (power): 70 CV Courant needed: 380 V Height: 6200 + 1250 mm Isdpfxjyt S U Ee Abcjtd

Condition: ready for operation (used), total height: 4,900 mm, total width: 5,900 mm, total length: 8,500 mm, passage width: 3,900 mm, power: 11 kW (14.96 HP), empty load weight: 85,000 kg, load capacity: 4,00,000 kg, Portaalrichtpers 400 ton Model: GANTRY-400T Voor het gericht van assen, gietstalen producten, gewalste producten, smeedstukken met vrije matrijs, vlak staal maar ook voor het in- en uitpersen van lagers, bussen, krimpringen,... 14 individuele tegendrukcilinders in de tabel - 3 ton dop per cilinder Ijdpsyt S Uxofx Abcjtd - 100 mm slak per cilinder - Druk 300 kg/cm² - Doorgang tussen de staanders: 3990 mm Werksnelheid – bij max. druk: 2 mm/sec Terugloopsnelheid: 50 mm/sec Sluitsnelheid: 30 mm/sec Max ram adjustment: 1550 mm Drawningspeed: 30 mm/sec Workingspeed: 2 mm/sec Returningspeed: 50 mm/sec Max distance between table - ram: 1550 mm Dimensions of the table: 7000 x 3200 mm

Condition: good (used), Year of construction: 1990, total height: 7,200 mm, total width: 4,200 mm, total length: 14,500 mm, throat depth: 700 mm, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Itjdeytfc Nepfx Abced Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: ready for operation (used), total height: 2,800 mm, total width: 1,800 mm, total length: 4,300 mm, empty load weight: 8,000 kg, Forming press for leather, textiles, hardboard etc... + roller system width 2500 mm Itjdpfoyru Hbox Abcod Capacity: 50 Ton Max distance between table - ram: 175 mm Dimensions of the table: 2850 x 1250 mm dimensions stamp: 800 x 800 mm

Condition: ready for operation (used), total height: 3,550 mm, passage width: 3,000 mm, empty load weight: 25,000 kg, load capacity: 5,75,000 kg, with 6 oil heated plates, thickness 50 mm (drilled with oil canals) 8 cilinders with a dia each of 150 mm closing time: 24 seconds Optional: Boiler to heat up oil which is used inside the tables -click here Furnierpressen - Conveyor press - Composit press - Heizplattenpressen Isdpfxoyru Hhs Abcstd Max ram adjustment: 520 mm Max distance between table - ram: 700mm Dimensions of the table: 3000 x 1650mm

Condition: new, neu ca. 4 Monate ab Auftragse Italien 63500 € 1200.15 € 70 to 500 mm 900x700 mm 600 mm 25 mm/s 6 mm/s 4 kW 1140 mm 940 mm 2350 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Itjdpfjynnfpsx Abced Pressur switch € on Request

Condition: new, neu ca. 4 Monate ab Auftragse Italien 164500 € 3109.05 € 260 to 500 mm 1400x1000 mm 600 mm 75 mm/s 5 mm/s 60 mm/s 22 kW 2800 mm 1650 mm 2750 mm Iedpfx Absynm I Njcjtd 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Ijdpfjynm I Aex Abcjtd Italien 123000 € 2324.7 € 170 to 500 mm 1200x700 mm 600 mm 110 mm/s 7 mm/s 70 mm/s 19 kW 2700 mm 1600 mm 2650 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 78000 € 1474.2 € 85 to 500 mm 900x600 mm 600 mm 105 mm/s 7 mm/s 58 mm/s 7.5 kW Ijdpfxsynm Ivj Abcjtd 2250 mm 1150 mm 2400 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien Iodeynm Ipjpfx Abcjtd 71300 € 1347.57 € 60 to 500 mm 800x500 mm 600 mm 120 mm/s 8 mm/s 58 mm/s 5.5 kW 1100 mm 1100 mm 2350 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 65000 € 1228.5 € 35 to 500 mm 800x500 mm 600 mm 125 mm/s 9 mm/s 68 mm/s 4 kW 1100 mm 1100 mm 2300 mm 4-pillar guide table and ram with T-slots Isdpfeynm Iiox Abcetd 2 hand operation stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 103500 € 1956.15 € 150 to 500 mm 1250x1000 mm 600 mm 23 mm/s 4 mm/s 5.5 kW 1520 mm 1270 mm 2500 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work Itsdeynm Icjpfx Abced • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

Condition: new, neu ca. 4 Monate ab Auftragse Italien 74800 € 1413.72 € 100 to 500 mm 1000x800 mm 600 mm 26 mm/s 5 mm/s 4 kW 1260 mm 1060 mm 2400 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter Ijdpfoynm H Sox Abcetd € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

Condition: used, Year of construction: 1983, pressure 120/15 t distance between columns 860 mm stroke 170 mm table-size 860 x 600 mm dayligth 350 mm max. distance table - ram 520 mm ram head dimension 860 x 600 mm hole in the table 200 x 140 mm table height over floor 850 mm total power requirement 25 kW weight of the machine ca. 7,5 t Ijdpfxeym Dz De Abcjtd dimensions of the machine ca. 2,3 x 1,7 x 3,4 m Maximum ram pressure: 120 kN Maximum pull-out pressure: 15 kN Sick light curtain Safety distance: 180 mm Maximum overrun: 15 mm

Condition: used, Year of construction: 1972, machine/vehicle number: 703, total height: 3,200 mm, table height: 1,160 mm, total width: 1,600 mm, total length: 2,000 mm, pressing force: 200 t, table width: 1,200 mm, table length: 730 mm, overall weight: 11,280 kg, distance table to ram: 870 mm, type of input current: three-phase, working height: 1,160 mm, clearance between the columns: 1,280 mm, stroke length: 620 mm, working range: 1,280 mm, drop-through hole in table: 30 mm, oil tank capacity: 300 l, input voltage: 380 V, control cabinet height: 670 mm, control cabinet length: 300 mm, Equipment: documentation/manual, Hydraulic Press GIGANT (Costruzioni Oleodinamiche) 200-ton, operational and available for sale. Machine equipped with drilled/slotted worktable for clamping and setups, complete electrical cabinet, and hydraulic system. Documentation available (manual/schematics). Main specifications: - Pressing force: 200 t - Overall dimensions (W×D×H): 1600 × 2000 × 3200 mm - Weight: 11,280 kg - Table height from floor: 1160 mm - Max opening (daylight): 870 mm - Min opening (daylight): 250 mm - Ram stroke: 620 mm (870–250) - Usable clearance between columns (X): 1280 mm - Usable clearance front/rear (Y): 600 mm - Usable working area: 1280 × 600 mm Table / clamping: - Through holes: Ø 30 mm - T-slots: 2 × (730 × 20 mm) + 2 × (1200 × 20 mm) Electrical / hydraulic system (nameplate data): - Power supply: 380 V – 50 Hz (three-phase) - Motors: 15 + 15 HP - Oil tank: 300 L (schematics/manual) GTP 200/2-E configuration with dedicated circuit and available electrical/hydraulic diagrams. Itjdeyl Nrropfx Abcod Electrical cabinet (external dimensions): - 670 × 500 × 300 mm (H×W×D) Condition: used Documentation: yes (manual/schematics). Transport: at buyer’s expense, loading by seller.

Condition: ready for operation (used), total height: 2,110 mm, total width: 2,240 mm, total length: 900 mm, passage width: 1,500 mm, power: 2.2 kW (2.99 HP), empty load weight: 1,250 kg, load capacity: 1,25,000 kg, width of table: 420 mm movable cylinder electro hydraulic two speed: fast slow Max ram adjustment: 400 mm Drawningspeed: fast 9mm/sec - slow 2,5 mm/sec Returningspeed: 12 mm/sec Itjdpfx Asyl A Exobcod Max distance between table - ram: 925 mm Courant needed: 380/400V

Condition: refurbished (used), Year of construction: 1976, functionality: fully functional, machine/vehicle number: 1146, total height: 2,752 mm, total width: 3,000 mm, total length: 1,152 mm, pressing force: 250 t, table width: 2,400 mm, table length: 800 mm, overall weight: 9,820 kg, distance between stands: 2,050 mm, stroke length: 700 mm, Hydraulic press GALFER DST/E 250, 250-ton double-column model, ideal for metal stamping and forming processes (deep drawing, bending, blanking, straightening, and general industrial pressing operations). A robust and reliable machine, equipped with a 2400 x 800 mm table and 700 mm stroke, with a 2050 mm gap between uprights to accommodate large dies and tooling. Features a 15 kW motor. The press is undergoing retrofit (upgrade/refurbishment), with the possibility of ready-to-use delivery based on the agreed configuration. The last photo is a render showing a possible complete revamping of the machine. Available on request: additional photos/videos, details on the retrofit status, technical documentation, and inspection opportunities. Itodsylz Dmspfx Abcsd

Condition: used, Year of construction: 1998, Pressure 63 t distance between columns 1000 mm stroke 300 mm Distance table/ram, max. stroke up, adjustment up 850 mm Ijdpfx Asylzx Debcotd table surface area 980 x 500 mm table height above floor 850 mm ram surface 130 mm speed down 400 mm/s speed up 461 mm/s working speed 14 - 97 mm/s power requirement 15,0 kW Weight 5,0 t Dimensions (WxDxH) 2,0 x 1,6 x 3,9 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: excellent (used), functionality: fully functional, installation height: 500 mm, pressing force: 120 t, table width: 600 mm, table length: 1,000 mm, operating speed: 59 mm/s, overall weight: 6,000 kg, reverse speed: 180 mm/s, distance table to ram: 800 mm, clearance between the columns: 850 mm, stroke length: 300 mm, operating pressure: 290 bar, pressing speed: 11 mm/s, Used hydraulic press (120t) in good and fully functional condition with modern electrical system. The press is mounted on rollers, allowing for flexible use as a mobile unit. Itjdpfsylk Eajx Abcsd

Condition: used, Year of construction: 1954, functionality: fully functional, Used Industrial Press Machine SÜDDEUTSCHE MASCHINENBAU Gesellschaft m.b.H. – Press Type HZ PR150-1000/850 – Year of manufacture: 1954 – Manufacturer: Süddeutsche Maschinenbau Gesellschaft m.b.H., Wiesental/Kreis Bruchsal (renowned German machine builder) – Press force: approx. 150 t (maximum pressing force, equivalent to 1,470 kN) – Working area: approx. 1000 mm × 850 mm (usable height/width, according to type code) – Massive H-frame construction – sturdy and industrial-grade – Mechanically/hydraulically driven pressing or forming press for metal and sheet metal applications – Large clamping or working surface, suitable for pressing, punching, forming, assembly, and joining operations – Robust, solid design; ideal for workshops, series production, or repair operations Condition: Used / operational / technically inspected (please specify condition further: fully functional, overhauled, requires maintenance, etc.) Optional equipment: (Tool holders, clamping devices, controls, safety guards – please specify if available) Fields of application: ✔ Metal forming Itjdpfx Asyk Sn Hobcsd ✔ Assembly of interference and press fits ✔ Drawing, bending, upsetting, and riveting processes ✔ Workshop and maintenance operations

Condition: good (used), pressing force: 1,250 t, Pressing force: max. 1250 t Width: 585 mm. height max. 480 mm. Stroke: max. 355 mm. Weight: 7200 kg. Itsdpfx Aoyiumcebcsd

Condition: used, Year of construction: 2018, functionality: fully functional, total height: 6,000 mm, total width: 3,500 mm, total length: 4,500 mm, pressing force: 1,000 t, table width: 2,300 mm, table length: 3,000 mm, operating speed: 10 mm/s, overall weight: 78,000 kg, reverse speed: 150 mm/s, working height: 1,300 mm, stroke length: 800 mm, working range: 1,300 mm, pressing speed: 10 mm/s, Hydraulic press 1000t Itsdpfxoyilh Ie Abced - in very good condition, used for stamping first series parts from progressive tools

Condition: good (used), functionality: fully functional, total height: 3,300 mm, table height: 850 mm, installation height: 1,000 mm, total width: 850 mm, total length: 950 mm, pressing force: 50 t, overall weight: 4,500 kg, The cylinder has been completely overhauled. Ijdpfxjyh Rfpo Abcjtd

Condition: good (used), Year of construction: 1995, 2-column spotting press MOSSINI PO/2M/P800, No. 0481, year of manufacture 1995, pressing force 800 t, working area 3,200 x 2,000 x 1,800 mm Ijdpoyhquaofx Abcetd