Sekuform

Condition: good (used), machine/vehicle number: 17346, functionality: fully functional, power: 4.78 kW (6.50 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, number of blades: 4, rotational speed (max.): 5,500 rpm, HK 63 combined jointer/thicknesser - Planing width 630 mm, - Cutterhead width 640 mm, - 4-knife cutterhead, - Table length approx. 2100 mm, - Planing height 2-230 mm, - Toothed steel infeed roller, steel outfeed roller, - 2 sliding rollers in the thicknessing table, Bjdps Ahmy Usfx Andsdi - Motor 6.5 HP, - Speed 5000 rpm, - Feed rate 10 / 16 m/min, - Adjustable fence for the jointer

Condition: used, For Export Only! G&J ML55 Pro film processor with daylight cassette G&J ML860 film processor without daylight cassette 2 x G&J ML860 film processors with bridge for Heidelberg Herkules Bdedpfxe Ahmy He Andoi

Condition: like new (used), Year of construction: 2022, operating hours: 404 h, functionality: fully functional, machine/vehicle number: UHM2260G019A04497, power: 24.27 kW (33.00 HP), first registration: 03/2022, fuel type: gasoline, Equipment: air conditioning, all wheel drive, EGHOLM CITY RANGER 2260 USED EQUIPMENT Bdedpfj Ahmy Aex Andoi CHASSIS NUMBER: UHM2260G019A04497 OFFICIAL REGISTRATION: HD-D 1579 FIRST REGISTRATION: 03/16/2022 WITH ONLY 403.7 OPERATING HOURS With the following features: - 33 HP gasoline engine, emission standard Stage V - With permanent 4-wheel drive - All hydraulic functions - Brush speed control - Ball hitch - Start-Stop function for salt and gravel spreader - Comfort cabin (ROPS) approved with StVZO equipment, lighting, mirrors and rotating beacon - Air-suspended Nappa leather seat with armrest - Air conditioning - LED work lights - Rear view camera With the following attachments: - Salt and gravel spreader USED EQUIPMENT Material: Stainless steel and plastic Movable support stand Adjustable spreading width from 1-5 m Spreading rate adjustment by speed-dependent spreader plate rotation speed Stirring finger system and vibration plate prevent bridging of the spreading material Cover for salt and gravel spreader - Snow plow 130 cm with rubber edge USED EQUIPMENT Or alternatively: - Front sweeper Winter USED EQUIPMENT With forward/reverse operation and center drive Side adjustment via parallelogram - EX WORKS - WITHOUT ANY WARRANTY, AS IT IS AN ABSOLUTE SPECIAL NET PRICE - INTERMEDIATE SALE RESERVED

Condition: used, For export only! ECRM Mako46, film imagesetter, A2 format, HQ-RIP ECRM Mako3650, high-speed film imagesetter, A3 format, HQ-RIP Bdsdo Ahmyxepfx Andsi

Condition: used, empty load weight: 7,824 kg, maximum load weight: 31,176 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 07/2015, next inspection (TÜV): 02/2027, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, loading space volume: 90 m³, total length: 13,620 mm, suspension: air, tire size: 385/65 22,5, tire condition: 50 %, color: blue, Year of construction: 2015, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 42003 Schmitz, S01 Tautliner * Year of manufacture: 2015 * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) * Air suspension * Used tarpaulin * Edscha/sliding roof tarp * Load securing certificate DIN EN 12642 Code XL * Lashing eyelets in the outer frame (Multilock outer frame) * Portal door * Aluminum side guards * Air coupling (red + yellow) * Spare wheel holder * 2x7-pin connector * 15-pin connector * Lifting and lowering mechanism * Storage box/tool box * Document box * Galvanized * Suitable for rail transport - can be lifted by crane * Coil well * Inspections: MOT / emissions test valid until 02.2027 * Suspension: Air * Gross vehicle weight: 39,000 kg * Unladen weight: 7,824 kg * Payload: 31,176 kg * Permissible gross vehicle weight: 39,000 kg * Axle manufacturer: Schmitz Rotos% * Tire condition 1st axle: 50% - 40% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 80% - 50% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 30% - 60% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 Bsdpfx Ano Ahmxhsdjdi * Interior dimensions: L=13620 mm, W=2480 mm, H=2680 mm * Interior volume*: 91 m² * Pallet spaces: 34 Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our extensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Quick and easy financing * Application for all (export) documents * Ordering of export license plates/customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading/load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists. We will be happy to advise you.

Condition: used, empty load weight: 2,300 kg, maximum load weight: 7,700 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 03/1987, suspension: steel, tire size: 235/75 17,5, tire condition: 70 %, color: black, Year of construction: 1987, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: truck registration, Vehicle number for inquiries: 41976 Reisch, RPT-8 * Year of manufacture: 1987 * Tandem trailer Bodpfxs Ahmxlo Andodi * Retractable lashing eyes * Automatic air coupling (Duomatik) * 2x7-pin connector plug * Wedge pocket housings with wedges * Rear support * Suspension: Leaf spring * Gross vehicle weight: 10,000 kg * Tare weight: 2,300 kg * Payload: 7,700 kg * Permissible gross vehicle weight: 10,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 70% -- 70% - Tire size: 235/75 R17.5 * Tire condition 2nd axle: 70% -- 70% - Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 Disclaimer: Subject to changes, prior sale and errors. More pictures and videos can be found on our website. Our comprehensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering of export license plates * Vehicle preparation: new tarpaulins, lettering, painting etc. * Professional loading/load securing * TÜV inspections, registration service * Transport of commercial vehicles Please ask our trained staff; we will be happy to advise you.

Condition: used, Year of construction: 2012, color: yellow, loading space volume: 47 m³, loading space width: 2,470 mm, loading space length: 7,410 mm, loading space height: 2,600 mm, first registration: 06/2012, total length: 7,410 mm, driver cabin: day cab, emission class: none, Equipment: cooling unit, truck registration, Vehicle number for inquiries: 41856 Krone, WB 7.45 * Year of manufacture: 2012 * 7.45 * Fixed roof * Portal door * Insulated box * Reefer box * Complete double-deck, incl. support beams * Deep-freeze unit * Aluminum floor * Evaporator * Cooling unit Thermoking * Diesel + electric * Other * Internal dimensions: L = 7410 mm, W = 2470 mm, H = 2600 mm * Internal volume: 48 m³ * Dimensions of corner fittings: E = 5853 mm * Dimensions of overhang: 799 mm * Pallet spaces: 18 * Cooling unit: Thermo King MD 300 * Diesel operating hours: 5736 hrs * Electric operating hours: 1443 hrs Bdsdpfxs Ahmxaj Andoi Disclaimer: Subject to changes, prior sale and errors. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please ask our trained staff, we will be happy to advise you.

Condition: used, Year of construction: 2012, operating hours: 1,855 h, fuel type: diesel, gearing type: automatic, overall weight: 2,500 kg, empty load weight: 2,250 kg, color: red, mileage: 1,855 km, first registration: 03/2012, maximum load weight: 250 kg, axle configuration: 2 axles, driver cabin: day cab, emission class: none, Equipment: truck registration, Vehicle number for inquiries: 41610 Mofett, On-board forklift * Year of manufacture: 2012 * Load capacity from 1,001 to 5,000 kg * Lifting height from 2,001 - 5,000 mm * Transmission type: Automatic Bedpfx Ano Ahmxdjdedi * Total weight: 2,500 kg * Unladen weight: 2,250 kg * Payload: 250 kg * Permissible total weight: 2,500 kg * Manufacturer: Mofett M4 254 - Load capacity 2,500 kg * Year of manufacture: 2012 * Fork length adjustable from 1,600 mm to 2,800 mm * Operating hours: 1,855 hours * [youtube]outubecom/watch?v=KLsGvNckwiw[youtube] Disclaimer: Subject to changes, prior sales, and errors. You can find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering of export license plates/customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading/load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, mileage: 1,53,730 km, power: 132 kW (179.47 HP), first registration: 07/2018, fuel type: diesel, empty load weight: 4,050 kg, maximum load weight: 3,150 kg, overall weight: 7,200 kg, tire size: 225/75 16C, tire condition: 90 %, axle configuration: 4x2, wheelbase: 4,400 mm, next inspection (TÜV): 09/2027, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, total length: 4,575 mm, loading space volume: 24 m³, loading space length: 4,575 mm, loading space width: 2,490 mm, loading space height: 2,110 mm, operating hours: 1,53,730 h, front tire size: 225/75 16C, rear tire size: 225/75 16C, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, parking heater, sliding door, soot filter, spoiler, tail-lift, truck registration, Quick and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of utility vehicles Bjdpfx Aj Ahmw Djndedi Please contact our trained specialists; we will be happy to advise you.

Condition: used, mileage: 3,99,243 km, power: 368 kW (500.34 HP), first registration: 05/2018, fuel type: diesel, empty load weight: 7,951 kg, maximum load weight: 12,549 kg, overall weight: 20,500 kg, tire size: 315/80 22,5, tire condition: 30 %, axle configuration: 4x2, wheelbase: 3,600 mm, brakes: retarder, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of beds: 1, Year of construction: 2018, operating hours: 3,99,243 h, front tire size: 315/80 22,5, rear tire size: 315/80 22,5, Equipment: ABS, air conditioning, cruise control, differential lock, fog lights, hydraulics, onboard computer, parking heater, sliding door, truck registration, Vehicle number for inquiries: 41870 MAN, TGX * Year of manufacture: 2018 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Power windows * Automatic climate control * Air suspension * Retarder / ZF-Intarder * Power steering * Sleeper cab * Heated seats * Auxiliary heater * Cruise control * Tipping hydraulics * On-board computer * Differential lock * Local distribution > 7.5 tons * Digital tachograph * Radio CD * Bluetooth * Sound system * Distance control assist * Lane keeping assist * OBU preparation * Refrigerator * Electric windows and mirrors * Air horns * AdBlue tank * Fog lights * Comfort suspension seat * Multifunction steering wheel * Sun visor * Transmission type: Automatic * Suspension: Air/Air * Gross vehicle weight: 20,500 kg * Tare weight: 7,951 kg * Payload: 12,549 kg * Permissible gross vehicle weight: 20,500 kg * Tire condition 1st axle: 50% - 50% - Tire size: 315/80 R22.5 * Tire condition 2nd axle: 30% / 30% - 20% / 20% - Tire size: 315/80 R22.5 * Wheelbase: 3600 mm * Tire sizes: 315/80 R22.5 * Cab: XLX Bdsdpfx As Ahmw Isndsi * 2-circuit hydraulics * Raised exhaust * Rotating beacons Disclaimer: Subject to changes, prior sale and errors. Further images and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Ask our trained specialists; we will be happy to advise you.

Condition: used, mileage: 4,22,832 km, power: 375 kW (509.86 HP), first registration: 07/2021, fuel type: diesel, empty load weight: 7,914 kg, maximum load weight: 10,086 kg, overall weight: 18,000 kg, tire size: 315/60 22,5, tire condition: 40 %, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 04/2027, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of beds: 1, Year of construction: 2021, operating hours: 4,22,832 h, front tire size: 315/60 22,5, rear tire size: 315/60 22,5, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, fog lights, onboard computer, parking heater, sliding door, spoiler, truck registration, Vehicle number for inquiries: 41869 MAN, TGX * Year of manufacture: 2021 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Power windows * Cab * Automatic climate control * Air suspension * Retarder / ZF-Intarder * Power steering * Sleeper cab * Heated seats * Auxiliary heater * Cruise control * Onboard computer * Differential lock * Long-haul transport > 7.5 tons * Digital tachograph * Sound system * USB interface * Distance assist * Lane keeping assist * OBU preparation * Refrigerator * Electric windows and mirrors * 2 beds * 2 x diesel tank * AdBlue tank * Roof spoiler * Fog lights * Comfort suspension seat * Multifunction steering wheel * Sun visor * Inspections: MOT / emissions test valid until 04.2027 * Transmission type: Automatic * Suspension: Air / Air * Gross vehicle weight: 18,000 kg * Unladen weight: 7,914 kg * Payload: 10,086 kg * Permissible gross vehicle weight: 18,000 kg * Tire condition, 1st axle: 50% -- 50% - Tire size: 315/60 R22.5 * Tire condition, 2nd axle: 30% | 30% -- 30% | 30% - Tire size: 315/60 R22.5 * Wheelbase: 3600 mm * Tire sizes: 315/60 R22.5 * Rotating beacon * Auxiliary air conditioning * Front axle tire size: 315/60R22.5 * Rear axle tire size: 295/60R22.5 Bjdpfx Aj Ahmw Sondjdi Disclaimer: Subject to changes, prior sale and errors. More pictures and videos can be found on our website. Our extensive service includes: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists, we will be happy to advise you.

Year of construction: 2024, condition: used, functionality: fully functional, Exhaust hood M4000 Technical specifications for each exhaust hood: Working width 4,000 mm Working height 3,000 mm Bdodpfo Ahmwyox Andoi Overall width 4,050 mm Overall height 3,050 mm Overall depth 750 mm Airflow rate 15,000 m³/h Fan 2 units, Atex Motor 2 x 3.6 kW, with Ex protection Scope of supply for the exhaust hood: 1 Exhaust hood housing, consisting of modules, entirely made of galvanized sheet metal 1 Set of labyrinthine pre-filters made of paper 1 Set of filter mounting frames with filter material made of glass fiber 2 Radial fans with spark protection, Ex protection

Condition: good (used), Year of construction: 2012, Ref. -No.: 10680 Manufacturer: TOYODA Type: FH 1250 SX Year of construction: 2012 Type of control: CNC Control: FANUC Series 310i-A Storage location: Halberstadt Country of origin: Japan Serial no.: NS 22XX X-Travel: 2200 mm Y-Travel: 1600 mm Z-Travel: 1850 mm Table Dimensions (Lengthxwidth): 1250 x 1250 mm Table Load: 2500 (zu bestätigen) kg Tool Taper: SK 50 Numbers Of Tools In Magazin: 128 (zu bestätigen) Turning Speeds: 20 - 6000 RPM Dimensions Of The Machine Ca.: 10500 x 6300 x 5000 (Platzbedarf) mm m Numbers Of Pallets: 2 Operating hours: 1833 H Further information: TOYODA FH 1250 SX – 1,833 operating hours Horizontal 4-axis machining centre with 2 pallets 1,250 x 1,250 mm and large tool magazine. Control: FANUC Series 310i-A Working range / travels - X-axis: 2,200 mm - Y-axis: 1,600 mm - Z-axis: 1,850 mm - 4th axis: rotary table (B-axis) - Feed X/Y/Z: 1 – 2,100 mm/min (stated as rapid traverse by seller, to be confirmed) Pallets / table - 2 pallets with automatic pallet changer - Pallet size: 1,250 x 1,250 mm (tapped holes, standard version) - Max. pallet swing diameter: Ø 1,600 mm - Max. load fixture + workpiece: 2,500 kg (according to manual, to be confirmed) Bedpe Ahmwkjfx Andjdi Spindle - Tool taper: SK 50 - Speed: 20 – 6,000 rpm Tool system - Chain magazine with 128 pockets (120 stated elsewhere, to be confirmed) - Automatic tool changer - Tool length measurement Equipment - Chip conveyor / coolant system KNOLL - Hydraulic unit - Electronic handwheel - Set-up station with pallet station - Tooling manual (JTEKT) available Floor space: approx. 10.5 x 6.3 x 5.0 m (L x W x H) Data according to seller's description, subject to technical changes and errors.

Condition: good (used), Year of construction: 2001, Ref. -No.: 10665 Manufacturer: GLEASON - PFAUTER Type: G 320 Year of construction: 2001 Type of control: CNC Control: Siemens Numerik 840 Storage location: Halberstadt Country of origin: USA Machine length: 3700 mm Machine width: 2400 mm Machine Height: 2750 mm Workpiece Weight Max.: 380 kg Weight Of The Machine Ca.: 11,5 t Travel -X Axis: 230 mm Travel -Y Axis: 135 mm Travel -Z Axis: 200 mm Bjdpe Ahmwgefx Andedi Max table speed: 240 1 / min

Condition: good (used), Year of construction: 1998, Ref. -No.: 10664 Manufacturer: HEDELIUS Type: BC 100 Performance Year of construction: 1998 Bdjdpj Ahmv Usfx Andei Type of control: CNC Control: Heidenhain 426 Storage location: Halberstadt Country of origin: Germany X-Travel: 3500 / 2 x 1450 mm Y-Travel: 1000 mm Z-Travel: 700 mm Tool Taper: SK50 DIN 69871 Numbers Of Tools In Magazin: 30 Turning Speeds: 20 - 5000 RPM Rapid Travel X/Y/Z: 30 mm / min Spindle power: 50 kW Minimum distance between spindle nose and table top: 190 mm Further information: - NC software version: 28047629 - PLC: bc80_426_3:07 - Setup 286197 37 The machine can be viewed while powered on by appointment.

Condition: used, Year of construction: 1976, Technical details: bore capacity in steel (diameter): 40 mm arm length: 1000 mm workpiece height max.: 1420 mm column diameter: 350 mm bore capacity in cast iron: 50 mm vertical adjustment of the arm: 575 mm spindle taper MT: MK 5 bore spindle stroke: 325 mm number of revolutions per minute of drill spindle:: 40 - 1700 /12 steps U/min feed range - spindle: 0,12 - 1,2 mm/U arm: 1075 mm distance drilling head - clamping area: 1250 mm table surface area: 750 x 750 mm total power requirement: 3,6/4,5 kW dimensions L x W x H: 2,2 x 0,9 x 2,82 m weight of the machine ca.: 2,9 t The machine features a solid radial arm that can swivel around the column, with a horizontally adjustable drill head and motorized arm height adjustment. The mechanical spindle speed and feed settings allow adaptation to different machining requirements. The equipment includes automatic spindle feed, hydraulic clamping functions and a heavy-duty box-type clamping table with T-slots, measuring 750 × 750 × 500 mm. The heavy-duty machine construction provides a stable foundation for machining larger and heavier workpieces. The adjustable radial arm allows different drilling positions to be reached without constantly repositioning the workpiece. Equipment and Features: ·Conventional machine operation ·Heavy-duty swivelling radial arm ·Horizontally adjustable drill head ·Motorized radial arm height adjustment ·Mechanical spindle speed and feed adjustment ·Automatic spindle feed ·Hydraulic clamping functions ·Box-type clamping table with T-slots, 750 × 750 × 500 mm ·Robust industrial design Bdsde Ahmv Rspfx Andsi *

Condition: good (used), Year of construction: 2008, Ref. -No.: 10657 Manufacturer: EMAG Type: EMAG VTC 250 Year of construction: 2008 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Hakberstadt Country of origin: Germany Turning Length: 630 mm Tool Taper: VDI 40 Turret places: 1 Pcs Bdjdpfx Ao Ahmv Hsndji Number of tool stations: 12 pc Turning Speeds: 5000 RPM Chuck diameter: 250 mm Further information: - The machine features an overhead drive spindle with a tailstock at the bottom. - Coolant tank, approx. 1,000 L, including - a paper filter roll. - Clamping devices: Hainbuch clamping top, including various centering tips - Gripping devices on the turrets for feeding and removing raw and finished parts during magazine operation. - Magazine loading - Vertical pick-up lathe, which can generally be easily upgraded for automatic loading and unloading. The machine can be viewed while powered on by prior arrangement.

Condition: good (used), Year of construction: 2014, Ref. -No.: 10654 Manufacturer: DMG Type: DMU DMC 80 FD duoblock Year of construction: 2014 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Germany X-Travel: mm Y-Travel: 1050 mm Z-Travel: 850 mm B-Axis: 180 ° C-Axis: 360 ° Machine length: 5100 mm Machine width: 2500 mm Machine Height: 3100 mm Tool Taper: HSK - 100 Numbers Of Tools In Magazin: 243 Turning Speeds: 10000 RPM Max. Torque: 2050 Nm Feed Speeds X/Y/Z Axis: mm / min Rapid Travel X/Y/Z: 60 mm / min acceleration: 7 / 7 / 7 m/s² Total Power Requirement: 36 kW Weight Of The Machine Ca.: 15300 t Spindle speed gear stage 1: min Spindle speed gear stage 2: min Holding torque: 3400 Nm Max. rotation of the table top: rpm Resolution of the measuring system: 0,001 ° Pallet clamping surface: Ø x 630 mm Bdjdpfx As Ahmvxondoi Weight of the pallet: 300 kg Feed force in X and Y axes: 13 Feed force in the Z-axis: 9 furnishing operation: 20 - 2000 m / min Further information: The machine can be viewed while it is powered on, subject to prior arrangement.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10641 Manufacturer: HERMLE Type: C 1200 V Year of construction: 2008 Type of control: CNC-Steuerung Control: Heidenhain TNC 430 Storage location: Halberstadt Country of origin: Germany Machine-No.: 193XXXX X-Travel: 1200 mm Y-Travel: 900 mm Z-Travel: 500 mm Tool Taper: HSK 63 Bjdo Ahmvuopfx Andodi Tool changer: 30 Spindle Speed: 16000 RPM Weight Of The Machine Ca.: 14 t Further information: The machine can be viewed while it is powered on, subject to prior arrangement.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10634 Manufacturer: ANAYAK Type: P 3200 Year of construction: 2004 Type of control: CNC-Steuerung Control: Heidenhain Bdedpfxj Ahmvqe Andji Storage location: Halberstadt Country of origin: Germany X-Travel: 3200 mm Y-Travel: 1400 mm Z-Travel: 750 mm Table-Size (Lxw): 3200 x 1400 mm spindle running time: 23.291 H Control: 83.301 H machine: 73.907 H Program run: 27.807 H

Condition: good (used), Year of construction: 2021, Ref. -No.: 10630 Manufacturer: MATEC Type: HV 700 Year of construction: 2021 Type of control: CNC-Steuerung Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany X-Travel: 2600 mm Y-Travel: 700 mm Z-Travel: 950 (horizontal) / 900 (vertikal) mm Swivel range: ± 105 ° Table speed range: max. 700 min/-1 Tool Taper: HSK-A63 Numbers Of Tools In Magazin: 50 Turning Speeds: 20 - 15.000 RPM Max. Torque: 195 (40 % ED) / 150 (100 % ED) Nm axes: 5 + Spindel Drive Capacity - Spindle Motor: 41 (40 % ED) / 31 (100 % ED) kW Operating hours: Steuerung ein 19.381 / Maschine ein 7.220 / Programmlauf 2.285 H Internal cooling: 20 / 40 bar Holding torque: 5.000 Nm NC rotary table: 2.000 kg Tabletop C-axis: NC-Rundtisch Ø 750 mm, im Maschinentisch eingelassen Bdodpfx Ao Ahmvmondei Further information: - NC swivel head, infinitely variable ± 105°, torque drive, swivel radius 250 mm - Motor spindle HSK-A63, 20 - 15,000 rpm, 41 kW (40 % duty cycle) / 31 kW (100 % duty cycle) - NC rotary table Ø 750 mm recessed into the machine table (torque drive, max. 700 rpm, indexing accuracy ± 2.5", max. load 2,000 kg) - Direct measuring system X, Y, Z axes (absolute) - 50 tool pockets - Internal coolant supply 20 bar and 40 bar with paper band filter (450 l) - Hydraulic motor spindle clamping for turning operations - Partition wall for pendulum (dual-station) machining - Automatic safety doors - 3D touch probe with radio transmission - Renishaw RTS tool setting probe with radio transmission (2 pcs) - Software option KinematicsOpt incl. calibration ball with holder - Dynamics package for free-form surfaces - Collision monitoring SETAC-ADVANCED - Electronic handwheel (portable) - Full work area enclosure with roof - Bellows with steel slats - Chip conveyor, special version for high-volume machining - Mechanical air filter CMC 1500 (2 pcs) - Cooling unit for electrical control cabinet - Flushing gun - Central oil lubrication - LED work area lighting - Installation elements The machine can be viewed under power by arrangement.

Condition: good (used), functionality: fully functional, GWR 80 thread rolling machine. Bedpfx Ano Ahmvijdsdi

Condition: good (used), Year of construction: 2011, Ref. -No.: 10615 Manufacturer: DMG Type: DMU 210 P Bdedps Ahmvfjfx Andoi Year of construction: 2011 Type of control: CNC-Steuerung Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 128/XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Swivel range: -30 / +180 ° Table Load: 10000 kg Max. rotary table diameter: 1700 O Table speed range: 12 min/-1 Tool Taper: HSK 63 Numbers Of Tools In Magazin: 60 Spindle Turning Speed - Stepless: 24.000 RPM Weight Of The Machine Ca.: 41 t Motor spindle: 24000 RPM Feed drive A, C: 30 min/-1 horizontal milling head: 130-1.380 mm vertical milling head: 230-1.480 mm Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10602 Manufacturer: DANOBAT Type: CR 330 Year of construction: 2010 Type of control: Digital Control: Digital Storage location: Halberstadt Country of origin: Germany tape length: 2438 mm capacity: 330 mm Speeds: 14-105 m / min Bodpfxs Ahmvbj Andjdi Vice opens: 345 m / min traverse: 500 mm engine: 3 kW Width: 1727 mm Height: 1878 mm Weight: 1750 kg Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC-Steuerung Bodpfxo Ahmu Te Andsdi Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor - Complete housing The machine can be viewed under power by arrangement.