Kösters Maschinenbau GmbH

Condition: used, Year of construction: 1999, x-travel 2600 mm y-travel 900 mm Klslhcdjwmgilew Het z-travel 1000 mm control Heidenhain TNC426

Condition: excellent (used), Year of construction: 2001, Machine Type: 5-Axis Vertical Machining Center Manufacturer: TCG Norte GmbH Model: VHS 630 Year of Manufacture: 2001 Control System: Siemens SINUMERIK 840D Machine Base: Gantry design with integrated rotary table Configuration: 5-axis simultaneous machining with swiveling spindle and rotary table Travel (X/Y/Z): 4500 mm / 630 mm / 1200 mm Swivel Range (A-axis): ±110° Rotation Range (C-axis): 360° Table Size: 4062 mm x 850 mm Max. Workpiece Weight: 2000 kg Spindle Speed Range: Up to 8000 rpm Spindle Power: 55 kW Tool Taper: HSK-A100 Kljlhowl Uxxocdw Hot Tool Magazine Capacity: 28 positions Max. Tool Weight: 15 kg Max. Tool Length: 400 mm Max. Tool Diameter: 125 mm Rapid Traverse (X/Y/Z): 20 m/min Feed Rates (X/Y/Z): Up to 20,000 mm/min Total Power Requirement: 55 kVA Machine Weight: Approximately 29,000 kg Machine Dimensions (W x D x H): 8234 mm x 4800 mm x 4060 mm Additional Equipment: • Integrated rotary table for 5-axis machining • High-pressure through-spindle coolant system • Chip conveyor • Full enclosure with splash guard • Tool measurement system • Air blow through spindle center • Probe system for workpiece measurement

Condition: good (used), Year of construction: 2004, Control: Siemens 840 D Travel: X = 2000, Y = 700, Z = 750 mm Pendulum machining: X = 2 x 700 mm Adapter: SK 50 DIN 69871 A Tool changer: 30-station Speed range: 30 – 4000 rpm Hollow shaft motor: water-cooled Power rating: 75 kVA Weight: approx. 19 tons Accessories: Klelswlt Rmehcdw Het -Electronic handwheel -External belt filter system 800 l, 40 bar -Hinged belt chip conveyor -Table clamping area: 2750 x 750 mm -2 hand guns -2 work area lights Including loading onto a truck

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Control: SIEMENS 840D x-travel: 2000 mm Kelhewlrh Rscdw Helt y-travel: 500 mm z-travel: 500 mm feed: 1 - 8000 mm/min table size: 2120 x 550 mm table load: 2000 kp rapid traverse X-axis: 40 m/min rapid traverse Z-axis: 20 m/min tool taper: HSK 63 A spindle speeds - continuously variable: 0 - 15000 rpm spindle drive: 20 kW spindle bearing diameter: 70 mm position accuracy: 0.020 mm Control: SIEMENS 840D Tool diameter: 63 / 126 mm Tool magazine: Chain magazine: 40 pieces Total power requirement: 65 kVA Accessories: Chip conveyor

Condition: used, Year of construction: 2005, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller manufacturer: FANUC, controller model: 18I MB, total height: 2,500 mm, spindle speed (max.): 9,000 rpm, space requirement length: 5,357 mm, space requirement width: 3,202 mm, CONTROLS .. CNC controls FANUC 18I MB WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 3 .. X-axis travel: 2000 mm .. Y-axis travel: 500 mm .. Z-axis travel: 550 mm SPINDLE / HEAD .. spindle revolutions (max): 9000 /min TOOL MAGAZINE .. number of positions: 24 .. tool diameter max.: 75 mm .. - with free neighbour positions: 160 mm .. tool length max.: 320 mm .. tool weight max.: 4 kg .. tool changing time: 15 s AUTOMATIC WORKLOAD EQUIPMENT .. number of store positions: 24 DIMENSIONS / WEIGHTS .. space requirements -left/right-: 5357 mm .. space requirements -front/back-: 3202 mm .. total height: 2500 mm including chip conveyor Duty cycle 53'700h Spindle hours 26'400h Tool holder 5 pieces The following auxilliaries can be bought seperately at additional cost: Röhm double clamps Torsion springs for tool holders 50 pieces Kljlhcdowldyfsw Het Tribos-S Polygon chuck with diameter 6,8,10,12,16 Lathe chuck diameter 12,20,32 SK40 Tightening bolt with hole

Condition: ready for operation (used), Year of construction: 1999, General Data Machine weight 10000 Control Unit Brand HEIDENHAIN Model TNC 410 Main Drive Tool taper 50 DIN 2080 Number of axis 3 Movement X-Axis Movement 2000 mm Y-Axis Movement 800 mm Z-Axis Movement 800 mm Kolhcdswk Rutow Holt Table Table load 4000 kg Clamping Unit Clamping force 1500 This 3-axis MTE Kompakt Plus vertical machining center was manufactured in 1999. It offers robust construction and precision for a variety of machining applications. Consider the opportunity to buy this MTE Kompakt Plus vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 1999, Control Unit Brand SIEMENS Kolhewk Ruaecdw Hslt Model SINUMERIK Main Drive Spindle speed range 18000 Number of axis 4 Movement X-Axis Movement 6000 mm Y-Axis Movement 750 mm Z-Axis Movement 400 mm Tools Slots in storage 35 This 4-axis Unisign UNIVERS 5 was manufactured in 1999. A vertical machining centre featuring a SIEMENS SINUMERIK control, spindle speed up to 18000 rpm, and a generous working envelope with X 6000mm, Y 750mm, and Z 400mm. It also includes a 4th axis and 35 tool pockets. If you are looking to get high-quality milling capabilities consider the Unisign UNIVERS 5 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2008, SPINDLE SPEED RANGE: 8000 1/MIN Kloljwk Rllshcdw Het NUMBER OF AXIS: 3 MOVEMENT X-AXIS MOVEMENT: 820 MM Y-AXIS MOVEMENT: 410 MM Z-AXIS MOVEMENT: 510 MM TABLE OUTER LENGTH: 1000 MM OUTER WIDTH: 450 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - Capacity: distance spindle nose – table min/max 150 - 660 mm - Distance spindle - column 450 mm - Iso 40 spindle connection - Feeds : rapid x/y/z axes 30/30/24 m/min - Tool changer: tool magazine 20 pos. - Max tool weight : 8kg. - Max user size diameter/length 90/250 mm

Condition: good (used), Year of construction: 2009, Functionality: fully functional, Controller HAAS with 15” LCD screen Table size 3000 x 800 mm Table load max. 1800 kgs X travel 3048 mm Y travel 813 mm Z travel 760 mm Spindle speed max.7500 rpm. Spindle power 22 kW Torque max. 460 Nm ATC magazin 30-fold Tool holder type SK50 Tool to tool time 4,2 Sec. Weight cca 14 tons Klolhowk I Rxjcdw Hjt Dimensions LxWxH = 7400 x 2590 x 3300 mm Features, accessories - CTS 20 Bar - Spindle cooler - Chip auger - MPG (electrical handwheel) - RENISHAW zero point measuring - RENISHAW tool presetter

Condition: ready for operation (used), Year of construction: 2013, operating hours: 23,000 h, General Data Machine weight 12000 kg Control Unit Brand HAAS Model n/a Main Drive Spindle speed range 7500 rpm Spindle motor power 22.4 kW Number of axis 3 Movement X-Axis Movement 2134 mm Y-Axis Movement 813 mm Z-Axis Movement 762 mm Table Table load 1800 kg Additional Equipment Spiral Chip Conveyor Detection Module for Power Failure Programmable Coolant Nozzle Coolant Tank Capacity: 360 liters Intuitive Renishaw Wireless Touch Probe Internal Cooling Supply: 69 bar Additional Coolant Filter System High-Intensity Lighting Automatic Compressed Air Supply 8 Additional M-Functions General Data Machine weight 12000 kg Control Unit Brand HAAS Model n/a Main Drive Spindle speed range 7500 rpm Spindle motor power 22.4 kW Number of axis 3 Movement X-Axis Movement 2134 mm Y-Axis Movement 813 mm Z-Axis Movement 762 mm Table Table load 1800 kg Additional Equipment Spiral Chip Conveyor Detection Module for Power Failure Programmable Coolant Nozzle Coolant Tank Capacity: 360 liters Intuitive Renishaw Wireless Touch Probe Internal Cooling Supply: 69 bar Additional Coolant Filter System High-Intensity Lighting Klolhcowkkxlsdw Hot Automatic Compressed Air Supply 8 Additional M-Functions This 3-axis HAAS VF 7/50 vertical machining center was manufactured in 2013. It features a robust SK 50 spindle, a spindle speed of 7,500 rpm, and a powerful 22.4 kW motor. The machine includes a 30-slot tool magazine, a 360-liter coolant tank, and a table size of 2,134 x 711 mm. Consider the opportunity to buy this HAAS VF 7/50 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2003, Functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 585 mm, controller model: Mazatrol, table width: 1,000 mm, table length: 2,240 mm, table load: 4,000 kg, overall weight: 25,000 kg, spindle speed (max.): 6,000 rpm, operating hours of spindle: 44,645 h, spindle nose: BT50, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This MAZAK FJV-50/80 is currently still operational at our customer in Germany and can be viewed working on location if seriously interested. The machine is available from the end of 2025, in consultation. The machine is in super neat condition as can be seen in the photos. Klolhcdwowkhn Re Het

Condition: ready for operation (used), Year of construction: 2003, General Data Measurements width 7000 mm Measurements depth 6000 mm Measurements height 4000 mm Machine weight 15000 kg Control Unit Model TYPE 3 OSA Brand BOSCH Main Drive Spindle speed range 12,000 min/-1 Spindle motor power 30 kW Number of axis 3+2 Movement X-Axis Movement 3000 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement 800 mm Y-Axis Rapid Traverse 30 m/min Z-Axis Movement 1100 mm Z-Axis Rapid Traverse 30 m/min Kslhcdwjwkauco Hjlt Tools Type of tool holder HSK 63 A Media Chip conveyor Yes Internal cooling Yes Additional Equipment Coolant system: Internal coolant supply 70 bar // Cooling unit for switch cabinet Paper belt filter Flushing gun Chip conveyor: Ejection height 1200mm 3D radio measuring probe Direct measuring systems x-y-z This MATEC 30 HV (2003) Universal Machining Centre was manufactured in 2003 in Germany. It is controlled by a BOSCH TYPE 3 OSA Control unit. This CNC traveling column milling machine (3+2 axes) is equipped with a main spindle type DMS 112 with speed range up to max. 12,000 min/-1 and drive power 30 kW. It has a NC swivel head (Sauter) with swiveling +/- 90 ° and graduation +/- 3 arc seconds. In addition it runs with a tool changer with 48 positions and a HSK A63 tool holder. The table is a NC rotary table with a clamping surface of 3,500 x 835 mm and 7 T-slots. IKZ 70 bar, paper belt filter and chip conveyor (ejection height 1200mm) and 3D radio measuring probe come with the machine. The machine is prepared with a 4th axis interface. The condition of the machine is very good - it is still in production and maintenance service has been applied regularly according to manufacturer's standards. An on-site inspection is possible at any time. Application Types Milling

Condition: good (used), Year of construction: 2003, Functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, controller manufacturer: Siemens, total height: 3,300 mm, total length: 7,800 mm, total width: 3,800 mm, overall weight: 8,400 kg, spindle speed (min.): 36 rpm, spindle speed (max.): 10,500 rpm, number of slots in tool magazine: 42, Equipment: chip conveyor, documentation/manual, - Max. feed force (N): X-axis = 4000 - Max. feed force (N): Y-axis = 4000 Kjlhcdewi Il Tew Holt - Max. feed force (N): Z-axis = 8000 - Table spindle nose min. = 200 mm - Table spindle nose min. = 560 mm - Tool holder SK 40 - Large coolant tank with paper filter

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 23500 Main Drive Spindle speed range 8000 Spindle motor power 22 kw Number of axis 3 Movement X-Axis Movement 2450 mm Y-Axis Movement 950 mm Z-Axis Movement 850 mm Table Kolewiz Rpohcdw Hjlt Outer length 2700 mm Outer width 950 mm Table load 4500 Tools Slots in storage 30 This 3-axis Hyundai Wia F 960M vertical machining center was manufactured in 2014. It features a large table size of 2700 x 950mm, capable of handling loads up to 4500kg. Equipped with a 22 kW spindle power and a maximum speed of 8000 RPM, it includes a 30-position tool magazine. If you are looking to get high-quality milling capabilities, consider the Hyundai Wia F 960M machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2001, operating hours: 29,189 h, Functionality: fully functional, machine/vehicle number: 153493, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol 640M, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS X-axis travel: 1,660 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Control: Mazatrol 640M Rapid traverse: 30,000 mm/min Feed rate: 8,000 mm/min Spindle Spindle mount: 7/24 taper, No. 40 Speed range: 40 - 10,000 rpm Power (continuous operation/30 min/10 min): 7.5 / 11 / 15 kW Table Table area (right/left): 2,000 mm Table area (forward/backward): 510 mm Number of T-slots: 5 T-slot size (ISO R299): 18 mm T-slot spacing: 100 mm Max. table load: 1,000 kg Distance spindle to table: 180 - 690 mm Spindle center to column: 530 mm Table height: 750 mm MACHINE DETAILS Weight: 9.1 t EQUIPMENT - Spindle cooling Klslhjwixtbjcdw Het

Condition: excellent (used), Year of construction: 1997, Functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 700 mm, table width: 650 mm, table length: 4,150 mm, Hedelius BC 60-2500 Very good condition Hedelius major service in 08/23 Converted to Siemens 840D Kljlhjwixm Uocdw Hjt B-axis SK40 / 40WKZ available immediately See pictures for details

Condition: good (used), Year of construction: 2007, Ref. -No.: 10473 Manufacturer: HEDELIUS Type: C60 - 2000 Year of construction: 2007 Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 620 mm Z-Travel: 520 mm Table Height: 860 mm Max. Workpiece Weight: 2000 kg Max. Tool Length: 330 mm Max. Tool Diameter: 80/125 mm Clamping Area: 2500 x 600 mm Kljlhcdwswiwhdo Het T - groove width: 18 mm T - slot spacing: 100 mm Numbers Of Tools In Magazin: 30 Turning Speed Range - Stepless: 30 - 8000 RPM Max. Torque: 198 Nm Rapid Travel X/Y/Z: 45000 mm / min Number of radial T-slots: 5 Machine length: 5400 mm Machine width: 3300 mm Machine Height: 3000 mm Weight Of The Machine Ca.: 10,5 t

Condition: good (used), Year of construction: 2004, Ref. -No.: 10387 Manufacturer: MATEC Type: 30 L / 6000 Year of construction: 2004 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 6000 mm Y-Travel: 800 mm Z-Travel: 600 mm Spindle Taper: SK 50 Klslhcjwiwayjdw Het Table Load: 3000 kg Max. Workpiece Weight: 800 kg Spindle Speed: 20 - 9000 RPM Max. Torque: 165 Nm Main Drive: 60 kW Weight Of The Machine Ca.: 24 t

Condition: like new (used), Year of construction: 2025, Functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 850 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 30 m/min, table width: 800 mm, table length: 3,060 mm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 44, Vertical center (pendular) with moving column AXA mod. VHC-3-M/2E with: - X-axis travel mm. 2600 - Y-axis travel mm. 700 - Z-axis travel mm. 850 - CNC Heidenhain i-TNC-530 Kjlhcdwewidz Re Helt - automatic continuous head on B-axis rotation ± 90° - spindle rotation speed 6000 rpm - high pressure through-spindle coolant system - tool magazine 22+22 places - hinged belt chip conveyor - supplied accessories - overhauled machine Free extension in 12/24 months

Condition: good (used), Year of construction: 2006, CHIRON CNC Vertical Machining Centre Type:MILL2000 Year:2006 Control:HEIDENHAIN TNC530 Kolhcdwswic Ipj Holt XYZ travel:2000x500x500mm Spindle speed:10000rpm Spindle taper:BT40 Toolchanger:24atc Machine weight:7800kg Coolant through spindle With swarf conveyor With cooling unit Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details!

Condition: good (used), Year of construction: 2012, Table size 2160 x 760 mm, table load 1800 kgs, Traverses XYZ 2160 x 762 x 650 mm, rapid feedrates 24m/min, Spindle power 18.5 Kw, Klslhcdewh Sg Sow Het spindle speed 12,000rpm, 30 station ATC, spindle taper BT40, coolant , swarf conveyor Fanuc control.

Condition: defective spare-parts repository (used), Year of construction: 1995, Functionality: not functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 800 mm, controller manufacturer: Fidia, controller model: M20, Offered is a used, defective 5-axis milling machine from FIDIA, model Digit 218/5 FIDIA M20 control system Year of manufacture 1995 Travel paths: X-axis longitudinal 2000 mm Y-axis transverse 1300 mm Z-axis vertical 800 mm Table dimensions clamping area 2300 mm x 1300 mm The table is not attached to the machine block, but is mounted separately Spindle speed range: 2000 – 20000 rpm Spindle power: 6 kW 2-axis fork milling head with integrated electric spindle B-axis 110 degrees C-axis 360 degrees Digitization device with K5 probe 15-station tool changer One set of collets / One set of shrink-fit adapters HSK 40 Total connected load 20 KW Documentation and circuit diagrams are available. The machine weight is stated on the nameplate as 9 tons. External panels/protective devices have already been partially removed (see pictures). The X and Y axes can be moved manually (with an Allen key) after releasing the motor brakes. Regarding the defects: A data connection from the operator terminal to the machine's main computer no longer exists. Therefore, the machine cannot function. The exact nature and extent of the damage to the machine cannot be specified. This machine is suitable for skilled personnel who are able to carry out potentially extensive repairs. Alternatively, equipping it with new components could be a solution. Keyword: retrofit. This machine is only sold to tradespeople with existing expertise in all aspects of mechanical engineering necessary to repair and recommission such a machine. Basic operating knowledge is by no means sufficient. To my knowledge, there has not been a crash. Until the electronics failed, all axes could be moved, the milling spindle was running, and the tool changer worked. Kolhcdwjwhuf Rs Hslt During my ownership, the machine was only used for simple drilling work, so I cannot provide any information about the achievable dimensional accuracy in milling operations. The machine has been unusable for several years. Since I lack the resources and prospects, it is now being offered for sale. The machine is being sold as defective. The exact extent of the defects is unknown. For refurbishment or as a spare parts carrier. The seller's liability for simple negligence is excluded. Purchased as seen and excluding any warranty, liability for material defects, or guarantee claims. The seller is not liable for indirect damages, lost profits, or other financial losses of the buyer. Extended retention of title: The machine remains my sole property until full payment is made. By purchasing the machine, the buyer expressly agrees to this. The machine is available for inspection and testing in 28857 Syke.

Condition: excellent (used), Working travels 1740 x 760 x 660 mm Table size 2000 x 760 mm Spindle taper SK40 Spindle speeds -12'000 rpm Tool changer 48 Pos. MAZATROL PC Fusion 640M control Coolant through spindle Tool breakage control device Tool length measuring device Misc.accessories Kslhcowhlr Uodw Hjlt MARCELS MASCHINEN CH

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 50 h, Functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 7 m/min, rapid traverse Z-axis: 7 m/min, table length: 3,000 mm, spindle speed (min.): 4,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 10, Equipment: rotational speed infinitely variable, CNC drilling/milling machine with Mitsubishi CNC control, but with the BAUER user interface, no CNC knowledge is required. SK 40 tool holder, Automatic tool changer for 10 tools, Kljlhcdwswhftre Hjt Automatic tool length measurement, DXF and DSTV data import, Handwheel, Pendulum machining (but without light barrier protection), Light barrier on the operator side, Spindle motor 7.5 kW, Spindle speed 200-4000 rpm, 21.5" touchscreen, Additional office software license, Retractable protective hood

Condition: used, Year of construction: 2001, DART VMC 1000 A MACHINING CENTER – TWIN SPEED YEAR OF FIRST INSTALLATION: 2001 WORKING SURFACE: 1,220 mm x 500 mm MAX. PERMISSIBLE LOAD: 1,500 KG. TRAVELS: X: 1,100 mm Y: 530 mm Z: 640 mm DISTANCE SPINDLE / TABLE: 150 – 790 mm SPINDLE CONNECTION: BT 40 SPINDLE SPEED: 60 – 8,000 RPM Kolhjwhb Dtecdw Holt RANDOM TOOL MAGAZINE: 24 POSITIONS MAIN MOTOR POWER: KW. 7.5 / 11 WEIGHT: KG. 6,500 COMPLETE WITH ALL DOCUMENTATION