Smartus Zrt.

Year of construction: 2008, condition: used, Distance between centers: 1500mm, swing over bed/cross slide: 620mm/400mm, control: Heidenhain ManualPlus 420. The machine has been in daily single-shift operation since 2008. An on-site inspection is possible. Nodpfx Amjzww Tgs Uowk

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, WMW Niles, Czeck Republic Made, CNC(Siemens Controls, Retrofitted in 2020) Floor Type Heavy Duty Lathe ,With heavy Duty Tail Stock, Steady Rest, Rollers, and with 6000 MM X 4000 MM Floor plates Njdszww R Sjpfx Am Uewk

Year of construction: 2019, condition: used, Center height: 200mm, distance between centers: 1000mm, swing over bed/cross slide: 400mm/225mm, spindle bore: 62mm, spindle nose: DIN 55027/6, tailstock taper: MK4, max. spindle speed: 4000rpm, main drive power: 10.5kW, operating hours PLC/motor: 1218h/145h, Control: Heidenhain. Machine dimensions X/Y/Z: approx. 2100mm/1080mm/1800mm, weight: approx. 1800kg. An on-site inspection is possible. Nwsdpfozwftbex Am Ujk

Year of construction: 2008, condition: used, Center height: 225mm, distance between centers: 1000mm, swing over bed/cross slide: 450mm/260mm, spindle bore: 65mm, max. spindle speed: 3000rpm, max. feed rate: 10m/min, tool turret: 4, main motor power: 7.5kW, control: Fanuc 0i Mate TC. Machine dimensions X/Y/Z: approx. 3500mm/1500mm/1700mm, weight: approx. 1550kg, operating hours: approx. 27000h, feed hours: approx. 1329h. Documentation available. An on-site inspection is possible. Nsdpfx Amezvy Evo Uowk

Condition: used, DSG Type 17 x 36 Gap Bed Centre Lathe Nodszvp Iajpfx Am Uewk Ø405mm 4 Jaw Chuck. Swing Over Bed Ø432mm. Swing Over Cross Slide Ø229mm. Swing Over Gap Ø660mm. Centre Height 216mm. Distance Between Centres 1,000mm. (20) Speed Range 16-2,000rpm. Spindle Bore Ø76mm. QTC. S/No. 41238-3-79. With Coolant System, Bott 2 Door Storage Cabinet With Contents Of Toolholders, Tooling & Hand Tools. Steel Storage Rack With 3 Faceplates, 2 Fixed Steadies, Ø305mm 3 Jaw Chuck, Ø305mm 4 Jaw Chuck. Weight 2,540kg.

Year of construction: 2004, condition: good (used), machine/vehicle number: 041115166, Offer 26699 Technical data: - Largest turning diameter – Ø over bed 550 mm - over cross slide 310 mm - Turning length approx. 1500 mm - Travel distances – Z-axis 1600 mm - X-axis 300 mm - Spindle mount according to DIN - Spindle bore 82 mm - Taper of tailstock quill MK 5 Nodpfx Amozvna Uj Uowk - Travel of tailstock quill 150 mm - Spindle speeds 80 - 3500 rpm - Rapid traverse rates X / Y - Drive 17 kW - with: - CNC control FAGOR - Hydraulic chuck - Electric handwheels - 8-position tool station - Manual tailstock - Coolant system - Space required approx. B 4400 x H 2100 x D 2300 mm - Weight approx. 4400 kg

Year of construction: 2004, condition: used, An INDEX CNC lathe with counter spindle and IEMCA bar feeder is offered. Main spindle bore: 65mm, max. spindle speed: 7000rpm, axes: 4, live tooling: possible, tool system: VDI25, spindle operating hours: approx. 80000h, control: Siemens 840D. 2) Bar feeder: IEMCA Master 880/MP 33 L, Year of manufacture: 2004, max. bar length: 3300mm, round bars: 8mm-80mm, hexagonal bars: 7mm-65mm, square bars: 10mm-50mm, max. bar weight: 120kg, min. remnant length: 110mm, bar feeder weight: approx. 1350kg. Including chip conveyor. Machine was continuously maintained. The machine is available from October. Documentation available. Inspection possible by arrangement. Nwodpfezu Sz Tox Am Uok

Year of construction: 2006, condition: used, Control voltage: 24V DC, rated current: 85A, connected load: 39kVA, rated power: 49kW, control-on operating hours: 32,779h, automatic operation 1: 5,040h, automatic operation 2 operating hours: 1,844h, production time: 33,731h, length: 3231mm, width: 2076mm, height: 1917mm, weight: 4.8t, with documentation, chip conveyor and FMB turbo 8-80 bar feeder. An on-site inspection is possible. Nwjdpozuzzvefx Am Uok

Year of construction: 2003, condition: used, Rated current: 60A, control voltage: 24V, connected load: 33kW, length: 2290mm, width: 1350mm, height: 1630mm, weight: 4.65t, operating hours: 78,439h, with documentation, chip conveyor and bar feeder. An on-site inspection is possible. Nodjzuzz Aspfx Am Uowk

Year of construction: 2002, condition: ready for operation (used), Max. turning diameter: 1000mm, max. swing diameter: 1250mm, max. workpiece diameter: 1000mm, max. workpiece length: 850mm, max. workpiece weight: 1000kg, X/Z travel: 1250mm/1000mm, max. speed: 900rpm, feed rate: 14m/min, rapid traverse: 20m/min, spindle nose: DIN 55026 short taper size A15, tool interface: DIN 69880 VDI60 tool holder, spindle diameter at the front bearing: 240mm, control: Siemens Sinumerik 840D. Machine weight: approx. 25t, space requirement: 85m². Equipment: SMW IN-D 1000 chuck, chip conveyor. The machine has no driven tools. Documentation available. Inspection possible by appointment. Nodpfxjzukr Re Am Uswk

Condition: ready for operation (used), Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible. Nwjdpfx Amozukt Io Uok

Condition: ready for operation (used), Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible. Nodezukufspfx Am Uewk

Year of construction: 2007, condition: ready for operation (used), A Buffalo CNC lathe in need of repair is offered for sale. Center height: 200mm, distance between centers: 880mm, chuck diameter: 160mm, swing over bed: 410mm, swing over cross slide: 230mm, bed width: 260mm, spindle bore: 46mm, spindle nose: A2-5, max. spindle speed: 5000rpm, X-axis travel: 190mm, Z-axis travel: 855mm, rapid traverse: 12m/min, tailstock quill diameter: 58mm, tailstock quill travel: 140mm, tailstock quill taper: MT4, control: Fagor 8055 TC. Accessories included. Dimensions X/Y/Z: approx. 2286mm/1800mm/2230mm, weight: approx. 2350kg. The feed motor of the spindle drive is defective. An on-site inspection is possible. Nwedpezt Slisfx Am Uok

Year of construction: 1997, condition: ready for operation (used), Distance between centers: 2000mm, control: Siemens Sinumerik 810, the control's flash memory is currently probably defective, but the parameters can still be accessed. an on-site inspection is possible. Nodpfxszt Sk Ss Am Uewk

Condition: ready for operation (used), A Hitachi Seiki CNC turning center in need of repair is offered for sale. Max. turning diameter: approx. 255mm, max. turning length: approx. 380mm, X/Z travel: 200mm/400mm, spindle speed: up to approx. 3600rpm, spindle motor power: 11kW, bar capacity: approx. 64mm, spindle bore: approx. 78mm, chuck size: approx. 255mm, tool turret: 10/12-station, tailstock taper: MT5, control: SEICOS-L MULTI, version V3R5.G. Weight: approx. 4300kg. A tool holder on the chuck is broken. An on-site inspection is possible. Nwodoztdtfepfx Am Usk

Year of construction: 2003, condition: ready for operation (used), Cross slide NC1-left, X1-axis: 450mm, cross slide NC1-left, Z1-axis: 1980mm, cross slide NC2-right, X2-axis: 450mm, cross slide NC2-right, Z2-axis: 1980mm, M-head slide-left, Q1-axis: 1980mm, M-head slide-right, Q2-axis: 1980mm, tailstock + steady rest slide-left, W1-axis: 1980mm, tailstock + steady rest slide-right, W2-axis: 1980mm, Y-axis: +/-65mm, workpiece length: 760-3000mm, workpiece clamping diameter: 20-200mm, main drive power: 2x 37kW, main drive speed (stepless): 0-2200/min, tool drive speed (stepless): 0-2320/min, tool holder: VDI50, tailstock center: MK 5, number of tool holders: 12, steady rest: SLU-5 SO, steady rest clamping diameter: 20-200mm, working height: 1300mm, max. workpiece diameter: 20-200mm, max. workpiece weight: 250kg, workpiece drive/clamping: 2x hydraulically operated SAV front-end chucks, max. chuck through-bore diameter: 210mm, spindle power: 2x 37kW, max. rapid traverse speed: 20m/min, control: Siemens 840D SL, connected load: 135kW, length: 7800mm, width: 3000mm, height: 3250mm, weight: 42t, with machine documentation, installation plan, foundation plan, transport plan, Knoll coolant system, Knoll chip conveyor, ILT extraction system and Promot loading and unloading gantry. Regularly serviced by the manufacturer, the machine was completely overhauled by the manufacturer in 2016. An on-site inspection is possible. Njdpfx Amoztdtle Uewk

Year of construction: 2000, condition: ready for operation (used), Workpiece length: 700-2400mm, workpiece diameter: 50-200mm, main spindle drive power: 2x 37kW, max. chuck through-bore: 210mm, chuck piston stroke: 25mm, chuck stroke per jaw: 11.1mm, max. chuck actuating force: 52.5kN, max. chuck actuating pressure: 30bar, max. chuck speed: 2000/min, loading and unloading unit range: 2600mm, center clamping head travel: 1200mm, center clamping head stroke: 1200mm, main fuse: 315A, connected load: 150kW, overall length: approx. 10,640mm, main section length: 6800mm, width: 2370mm, height: 2860mm, overall height including superstructure: 3450mm, operating hours: 3143h. With chip conveyor, loading and unloading unit, fixed center clamping head, movable center clamping head, control panel, ILT air cleaner, electrical cabinet, hydraulic cabinet, coolant tank for motor cooling and coolant tank for tool cooling and documentation. Partially overhauled by the manufacturer in 2021. An on-site inspection is possible. Nsdpfxoztdt Ee Am Uewk

Condition: ready for operation (used), A CNC lathe Optimum is offered. Swing over bed/cross slide: 300mm/200mm, distance between centers: 430mm, X/Z travel: 145mm/465mm, X/Z rapid traverse: 10m/min/12m/min, bar capacity: 30mm, spindle bore: 30mm, max. spindle speed: 4000rpm, tool stations: 6, control: Siemens SINUMERIK 808D ADVANCED. Machine dimensions X/Y/Z: approx. 1655mm/1590mm/1955mm, weight: approx. 832kg. An on-site inspection is possible. Nwedpfx Amsztdtxo Uek

Year of construction: 2018, condition: ready for operation (used), Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screws), motor spindles with release units (replace bearings/reseal), cross slides (guideways/ball screws/motor), workpiece spindle (replace bearings/reseal), protective enclosure (interior cladding/working area door/repaint machine), coolant pumps, replacement of electrical cables/lubrication and hydraulic lines, as required. An on-site inspection is possible. Nwodoztducopfx Am Uek

Condition: used, Year of construction: 2020, functionality: fully functional, travel distance X-axis: 1,700 mm, travel distance Z-axis: 500 mm, Technical specifications: Manufacturer: Weisser Type: Univertor AM-1L Year of manufacture: 2020 Control: CNC control Siemens SINUMERIK 840D sl Travel ranges: X 1,700 mm, Z 500 mm Spindle unit, left side of the machine Maximum speed: 3,500 rpm Rated speed: 780 rpm Torque: 430/610 Nm (100/40% duty cycle) Spindle bearing diameter: 120 mm Spindle flange: A8 according to DIN 55026 Grinding unit Maximum speed: 16,000 rpm Grinding wheel arbor: 40 x 10 mm Turret Disc turret: 12-position Drive: electric swivel drive Nwedpfxszrz Ido Am Usk Internal grinding spindle with grinding software Tool holder: D28/43 (M28x2 thread) Spindle bearing diameter: 45 mm, hybrid design Maximum speed: 45,000 rpm Rated speed: 30,000 rpm Drive power: 15/18 kW (100/60% duty cycle) Torque: 4.7/5.7 Nm (100/60% duty cycle)

Year of construction: 1999, condition: ready for operation (used), Turning diameter: 500 mm, swing diameter over the cross slide: 290 mm, turning length: 1500 mm, spindle speed: 8 to 2800 rpm with three gear ranges, spindle bore diameter: 70 mm, three-jaw chuck diameter: 250 mm, tailstock quill taper: MT4, quill travel: 180 mm, connected load: 24 kVA, control system: Heidenhain Manual Plus, length: 3200 mm, width: 1700 mm, height: 1800 mm, weight: 3.2 t, operating hours: 42,733 h. The machine is equipped with a manual tailstock, chuck guard, coolant system, Multifix tool holder, various tool holders, various drill chucks, various turning and drilling tools, interchangeable jaws for the three-jaw chuck, a depth stop for the main spindle, a tool cabinet and documentation. The machine was completely overhauled by the manufacturer in 2010. An on-site inspection is possible. Njdpfxezrn Idj Am Ujwk

Year of construction: 2001, condition: ready for operation (used), X-axis travel: 220 mm, Z-axis travel: 635 mm, swing diameter over the bed cover: 570 mm, swing diameter over the cross-slide cover: 420 mm, speed range: 25-5,000 rpm, spindle bore diameter: 65 mm, chuck diameter: 250 mm, tailstock travel: 550 mm, main spindle drive power at 100% duty cycle: 21 kW, maximum torque: 240 Nm, C-axis holding torque: 200 Nm, control system: Heidenhain EP 4290 TP, connected load: 44 kVA, length: 3,250 mm, width: 1,750 mm, height: 2,300 mm, weight without chip conveyor: 5.3 t, operating hours: 16,930 h. Equipment: Hydraulically adjustable three-jaw chuck with various interchangeable jaws, MK4 tailstock quill, 12-station VDI 30 disc turret with 6 driven tool stations, tool measuring arm, workpiece pick-up device, coolant system, chip conveyor, coolant mist extraction system, various tool holders, Drehwerk turning and milling tools including driven tools, two tool cabinets and documentation. The main spindle produces running noise. An on-site inspection is possible. Nedpfx Aozrn H Tsm Uewk

Year of construction: 2017, condition: used, machine/vehicle number: 01142, Max. machining diameter: 42 mm, max. turning length: 300 mm, control system: FANUC Series 32I-Model B, filter unit, 1 left-hand bar feeder BARLOAD Vito, year of manufacture: 2017, serial number: 22171258, weight: 980 kg, right-hand conveyor belt, chip conveyor, without tools. Nsdpfx Ajzqy Sxjm Ujwk

Year of construction: 2018, condition: used, machine/vehicle number: 01167, 8-axis, max. machining diameter: 42 mm, max. turning length: 300 mm, with FANUC Series 32i-Model B control, conveyor belt, chip conveyor, left-hand side BARLOAD Vito bar feeder, year of manufacture: 2018, serial number: 22181650, filter and cooling unit, without tools. Nedpfxjzqy Ugs Am Uewk

Year of construction: 2018, condition: used, machine/vehicle number: 01163, 8-axis, max. machining diameter: 42 mm, max. turning length: 300 mm, with FANUC Series 32i-Model B control, conveyor belt, chip conveyor, filter and cooling unit, left-hand BARLOAD Vito bar feeder, year of manufacture: 2018, serial number: 22181648, HABOR oil cooler, without tools. Nwedpfjzqy T Ajx Am Ujk