Simon Industrie Montage GmbH

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, roller diameter: 80 mm, stroke length: 99,999 mm, max strip width = 150 mm strip thickness 0,1 to 3,6 mm This WVS/L 150 electronic roller feeder is characterized by high feed performance and precision. It is suitable for all materials, materials, and feed lengths. At the heart of the machine are two precision-ground rollers, which are driven and positioned via a preloaded gear and an AC servo motor. These rollers can be hard chrome-plated to increase wear resistance. The upper feed roller offers the following features: It can be manually or automatically lifted to thread or align the strip material. The lift distance is continuously adjustable. A pneumatic cylinder and a mechanical parallel compensation system force the upper roller onto the strip, parallel to the lower roller, with a preselectable force. This allows the strip to be fed in an off-center position. This allows the upper roller to automatically adjust to the respective strip thickness within the permissible strip thickness range. High user-friendliness is achieved. In addition, the strip is positioned extremely gently, largely eliminating any damage to the strip. Compared to other feed methods, the noise level during operation is extremely low. Knsdpoxnzitefx Aabsc The lateral strip guidance is provided by rollers located at the inlet and outlet of the machine, which are adjustable via handwheels. The roller inlet guide, provided by a roller cage, supports the strip loop at the roller feed. This ensures smooth strip running as it enters the roller feed unit. The AC servo motor is controlled by a PLC. This control system can be programmed via the INDRAMAT operator terminal (see enclosed description). The control system and the associated electrical components are housed in a separate control panel. The following parameters are programmable: o Feed lengths in length units o Max. speed in % o Setup accuracy o Max. acceleration in % o Working direction o Roller diameter correction

Condition: used, Pneumatic gripper feeder, strip feeder FESTO type BV 50-40 Material feeder for strip material from coil or as bar feeder Feed length: max. 70 mm Strip width: max. 100 mm Sheet thickness: max. 1.5 mm Kjdpfexddwxjx Aabsnc Feeding force at 6 bar: 400 Newton Return force at 6 bar: 320 Newton Clamping force at 6 bar: 1300 Newton - The feeder was used for approx. 70 mm strip width - Supplied without control system and external valves Compressed air requirement: 3-6 bar Weight: 6 kg In good condition

Condition: used, Number 1: Width x Depth x Thickness = 770 x 580 x 90 mm Hole = 131 mm and 200 x 300 mm and Number 2: Width x Depth x Thickness = 800 x 600 x 60 mm Hole = 150 mm and Number 3: Width x Depth x Thickness = 650 x 500 x 60 mm Hole = 120 mm and Number 4: Width x Depth x Thickness = 550 x 440 x 80 mm Hole = 195 x 150 mm and Number 5: Knjdpfoxckgkex Aaboc Width x Depth x Thickness = 315 x 320 x 40 mm Hole = 95 mm

Condition: like new (used), Year of construction: 2012, Millutensile AE6020 100, year 2012 , width 100 mm, max thickness 3 mm, speed 120 m/min, including spray lubrication unit. + uncoiler SM400, year 2012, max load 400 kg, max width 200 mm, motorised Knedpfx Aoxbq Sqjaboc

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei Knsdpswkvm Ijfx Aabsc 12150 € 233.28 € 0.4 - 2 mm 100 mm 200 mm² 63 mm 150 m/min 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,--

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 29990 € 572.81 € Kodpfx Aaowirqmebjnc 0.4 - 3.5 mm 200 mm 700 mm² 80 mm 75 m/min 10 m/s² 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7" colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,--

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 29460 € Kedpswiri Nofx Aabsnc 562.69 € 0.4 - 4 mm 100 mm 400 mm² 80 mm 75 m/min 10 m/s² 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7" colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,--

Year of construction: 2018, condition: new, neu 2018 070033 prompt, Zwischenverkauf v Türkei 20310 € Kedswiqtmopfx Aabjnc 389.95 € 1 0.6 - 4 mm 300 mm 900 mm² 80 mm 10 Nm 2.62 kW 1000 mm 800 mm 1400 mm 330 kg DEMO MACHINE helical gear box Wattdrive pneumatic equipment Festo control SCHNEIDER with touchscreen 2 driven rolls remote service module hand wheel Euchner operating manual in German with EC conformity declaration

Condition: good (used), Pressing tool, sheet metal former, forming tool, edging tool, folding tool, bending tool, die, die tool -Bending tool: Lower tool for bending machine / press 5 pieces -Length: 2x 300 mm / 1x 275/200/175 mm each Ksdpev Szbhsfx Aabenc -Groove width: 58/52 mm -Angle: 90° -Dimensions: see photos / technical drawing -Price/Delivery: complete -Transport dimensions: 450/300/H115 mm -Weight: 48.3 kg

Condition: new, Clutch-brake series УВ 31… for presses type КД2324, КД2124, КД2324К, КД2124К, КД2324Е, КД2124Е, КД2128, КД2328, КД2128К, КД2328К, КД2128Е, КД2328Е, КД2126, КД2326, КД2126К, КД2326К, КД2126Е, КД2326Е, H-3222A, HA-3223, HA-3225, H-475, H-481, H-483. The offered brake is new and has 100% confirmed correctness and efficiency of operation. It is also possible to purchase spare parts such as brake discs, friction linings, bushings, body pins, flywheel pins, springs and a set of seals. Kjdpfx Ajv Saxrjabjnc We offer clutch-brake type: YB3132, YB3135, YB3138, YB3141, YB3144, YB3146 for various guillotines and presses of former USSR origin. The weight of the complete clutch - depending on the specific type - ranges from 200-300 kg. Our offer also includes other parts and accessories for metalworking machines of Russian production (former USSR).

Condition: new, functionality: fully functional, Year of construction: 2025, coil width: 200 mm, product width (max.): 200 mm, overall weight: 80 kg, warranty duration: 12 months, working width: 200 mm, product height (max.): 3 mm, roll width: 64 mm, Silicon+ SFS 200 Servo Roll Feeder Compatible with all kind of presses, primarily used on Bruderer, Schaal and Mabu machines. Feeding length – min 0.10 mm to max. 9999.99 mm Feeding width – max. 100 mm, 200 mm or 300 mm. Depending of model required. Material thickness – 0.20 – 3.20 mm Feeding angle – 180° Die line height – ± 50 mm Max. feeding speed – 20 m/minute Strip release – Festo pneumatics Control – NC Touch screen Servo brushless motor – 0.75 KW, 1.8 KW or 2.3 KW. Weight approx. feeder: 80-150 kg. Feeder dimensions: 780 X 730 X 680 mm – The unit is driven by the brushless servo motor, with direct drive transmission, eliminate the gear clearance, abrasion, no noise, no lubrication, safely to a synchronized pair of roller segments. Knodsvptz Iopfx Aabsc – Rolls can be made upon request with PU surface for delicate raw material feeding. – Synchronization of the feeder and punching machine is done easy through cam signal from PLC of a punching machine. – Programmable feeding can be done for up to 10 groups of feeding pitches and saved as recipes. The feed length can be steplessly adjusted during operation EUR 1 certificate of European origin and CE compliance. This information is subject to change without notice, we can make personalized feeders for your needs with prior agreement.

Condition: good (used), pressing tool, sheet metal former, forming tool, ball forming tool -Pressing tool: ball forming tool Ksdpfx Aaevmx T Debsnc -Radius: 50.11 mm -Hole: Ø 40 mm -Dimensions: Ø 165 x 270 mm -Weight: 18.4 kg

Year of construction: 2024, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, DESTACO pneumatic power cylinder WK3000-30-6-1. Article number 0576762. Was purchased in 2024 for a test only. Inspection is possible. Sold without guarantee and return. Kjdpfx Aaovb Di Tebonc

Condition: used, clamping plate, clamping table, clamping cube, press table Kedpfxou N Sine Aabonc -Clamping table: clamping plate for hydraulic press eccentric press -Clamping surface: 365 x 305 mm -Dimensions: see photo technical drawing -Dimensions: 365/305/H150 mm -Weight: 57 kg

Condition: used, clamping plate, clamping table, clamping cube, press table -Clamping table: clamping plate for hydraulic press eccentric press -Clamping surface: 500 x 280 mm Knedpfsu N Siusx Aabsc -Dimensions: see photo technical drawing -Dimensions: 500/280/H180 mm -Weight: 53 kg

Condition: used, Technical details: intake diameter: 310 mm weight: 216 kg dimensions L x W x H: 0,5x0,2x0,9 m conrods for mechanic press PEE 250 trapezoid thread dia. 146x14mm * Knsdpfx Aou Nurxsaboc

Condition: used, Technical details: diameter of piston: Ø 160 mm weight: 200 kg dimensions: 0,6 x Ø 0,3 m draw cushion for a WMW Erfurt Press type PYE 160 blankholder force 50Mp ejector force 4 Mp stroke up to 160mm Knodpfx Aju Nurfoabjc flange diameter 280mm piston diameter 160mm piston central drill hole M 16, fixing holes M 24, diameter 118mm hydraulic connection 2x 1 inch *

Year of construction: 1977, condition: used, Gripper feed for eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Raster, collet feed from punching machine type HR 60 NL-4S -Stroke: mm -Dimensions: see photos Knjdjtigw Njpfx Aaboc -Transport dimensions: 900/640/H620 mm -Weight: 200 kg

Condition: used, Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: molding tool/press tool Ksdpfx Asrlpn Reabonc -Profile: Ø 98 mm -Receptacle: Ø 40 mm -Dimensions: Ø 98 x 185 mm -Weight: 7.4 kg

Condition: used, Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: molding tool/press tool -Profile: Ø 76 mm -Receptacle: Ø 40 mm -Dimensions: Ø 76 x 130 mm Knedpfjrlppkjx Aabec -Weight: 2.8 kg

Condition: used, Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool Kjdpfx Aaerlppnjbsnc -Die tool: molding tool / press tool 2-part -Profile: angle 90° -Receptacle: Ø 40 mm -Dimensions: 160/140/H345 mm -Weight: 40.1 kg

Condition: used, Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: forming tool / press tool adapter MST Ø 85 -Receptacle: Ø 40 mm -Receiving thread: M34 -Dimensions: Ø 85 x 160 mm -Weight: 4.5 kg Ksdpjrlpprofx Aabsnc

Condition: used, Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: forming tool/press tool adapter -Receptacle: Ø 40 mm Kederlppvopfx Aabjnc -Bore: Ø 20 mm -Dimensions: Ø 70 x 135 mm -Weight: 2.6 kg

Condition: used, Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool Kjdpfxerlppys Aabonc -Die tool: forming tool / press tool clamp press tool -Receptacle: Ø 40 mm -Profile: Radius 20 mm -Dimensions: 140/46/H120 mm -Weight: 2.2 kg

Condition: ready for operation (used), Spare parts for Dnepropress PA 1345 Kedpfx Asrcbmbeabjnc Bolts, nuts, cylinders