Simtec GmbH

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 400 mm turning length - mm control DMG Mori SLIMline z-axis ca. 750–755 mm x-axis 276 mm y-axis +/-60 mm greates pass round over bed 700 mm Additional information The machine is in very good condition and has recently been inspected and measured by a service technician. The lathe was primarily used to manufacture turned plastic parts. CNC lathe with driven tools, C-axis, Y-axis, and counter-spindle CNC control: DMG Mori SLIMline multi-touch control (19"/Operate 4.7 on Siemens) Screen language: German/English Main spindle: A2-8 with AC motor Drive power 25.5/17 kW (100/40% duty cycle) Spindle speed 4000 rpm Hollow clamping system, max. bar capacity 80 mm Counter-spindle: A2-6 designed as a built-in motor spindle ISM 52 with hydraulic clamping device Drive power 14/13 kW (100/40% duty cycle) Spindle speed 5000 rpm 12-station servo tool turret: VDI 40 mount with 12 driven tool stations Equipment: Y-axis +/- 60 mm Direct position measuring system (X and Y axes) Bar package & interface IEMCA KID80/16 short bar loader, bar capacity 80 mm Iedpozu Nxpefx An Ioba Differential pressure clamping for main spindle Chuck flushing for main spindle Reduction tube for main spindle Hainbuch SPANNTOP nova Combi G80 Axzug collet chuck Differential pressure clamping for counter-spindle Chuck flushing for counter-spindle Automatic workpiece ejector Counter-spindle with internal coolant supply for workholding flushing SMW BB-D210 hydraulic 3-jaw chuck for counter-spindle SMW BB-D250 hydraulic 3-jaw chuck High-pressure pump 12 bar Coolant spray gun bar Dual cartridge filter for coolant, filtration fineness 60 µm Manual tool measuring device in the workspace, Marposs make Tool monitoring system, Easy Tool Monitor 1.0 technology cycle Alternating Speed ??technology cycle 3D data model in STEP format DMG MORI Messenger V2 DMG MORI Netservice – client Finished part discharge conveyor Chip conveyor with right-hand discharge External electronic handwheel Tool holder package

Condition: used, Year of construction: 2015, functionality: fully functional, Model: OKUMA MULTUS U3000 2SW 1500 (CNC turning and milling center) Control: OKUMA OSP-P300S Turning length: approx. 1,500 mm Max. turning diameter: up to 650 mm Tool system / interface: HSK-A63 Main spindle: Drive power: 22 kW Torque: 427 Nm Max. speed: 5,000 rpm (2 gear stages) Spindle nose: Short taper, size 6 Spindle front bearing: Ø 120 mm Spindle bore: Ø 80 mm 3rd counter spindle (Okuma motor spindle) Travel: Traversable on the W-axis Drive power: 22 kW Torque: 427 Nm Max. speed: 5,000 rpm Spindle nose: Short taper, size 6 Spindle front bearing: Ø 100 mm Spindle bore: Ø 62 mm Iodpfx Anszu I U As Ioba Tool spindle / milling spindle (Okuma motor spindle) Drive power: 22 kW Torque: 120 Nm Max. speed: 12,000 rpm Tool holder: HSK-A63 Axes & travel ranges C-axis: 360° (division / positioning in 0.001° increments) Y-axis: Stroke +125 mm / -125 mm (total stroke 250 mm) B-axis: 240° (division / positioning in 0.001° increments) Tool magazines & turret tool magazine (ATC): 40 positions Lower turret: 12 stations with direct clamping system "radial" Turret guides: ZB-axis with cylindrical roller bearing guide XB-axis with sliding guide Coolant supply / internal coolant supply (ICS): max. 20 bar (incl. bag filter) External cooling of tool spindle: max. 8 bar Accessories: Short loader LNS Quick Load Seri O III

Condition: excellent (used), I have a GILDEMEISTER CTX600E V3 CNC lathe with powered tool drive for sale. TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX600E V3 Control System: Heidenhain 3190 Country of origin: Germany Year of manufacture: 1998 The machine is fully equipped with fixed, powered tool holders, as well as many soft and hard jaws. Machine parameters: - Turret: 12 tools in VDI-50 holders (6 powered tool slots) - Max. speed: 3600 rpm - C-axis - Powered tools - Hydraulic tailstock - Tool measurement probe - Max. turning diameter, X-axis = 500mm - Max. turning length, Z-axis = 1000mm - Cooling system - Hydraulic 3-jaw chuck, 400mm - Chip conveyor Iodpfxezu Df Rs An Ijba - Complete programming manual - Mechanical and electrical documentation - Machine weight: 9 tons - Loading is included in the price The machine has undergone a complete inspection. It is in 100% working order, connected, and ready for operation. Stal-Com has been involved in the sale, service, and training of CNC machines from the DMG group for 20 years. We specialize in all models of Gildemeister lathes and Deckel Maho machining centers. All machines undergo a thorough technical inspection. Our machines are purchased not only by customers in Poland but also by customers from all over Europe and parts of Asia. Each machine can be inspected during production, as we also offer machining services. After purchasing a machine from our company, we provide training for the staff and can also set up production of parts at the customer's location. We cooperate with many companies on an ongoing basis, supplying them with new machine tools.

Condition: excellent (used), For sale: GILDEMEISTER CTX 410 V3 CNC LATHE with driven tools Isdozu Dfqspfx An Ieba TECHNICAL & VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V3 Control: Heidenhain 4290 Country of origin: Germany Year of manufacture: 2006 The machine is fully equipped with both static and driven tool holders. Machine specifications: - Turret: 12 positions for VDI-30 tool holders (all stations are driven) - Max spindle speed: 5,000 rpm - C-axis - Driven tools - Tailstock - Max turning diameter (X-axis): 320 mm - Max turning length (Z-axis): 600 mm - Coolant system - Hydraulic collet chuck on the main spindle (can be replaced with 3-jaw chuck) - Main spindle with through-hole (bore diameter: 66 mm) - Finished parts catcher - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 5 tons - Loading included in the price The machine has undergone a complete inspection. Fully operational and ready to work—currently connected and available for demonstration. About the company: Stal-Com has been trading, servicing, and providing training on DMG Group CNC machines for over 20 years. We specialize in all Gildemeister lathe models and Deckel Maho machining centers. Every machine undergoes a thorough technical inspection. We supply not only customers in Poland, but also across Europe and parts of Asia. Each machine can be inspected live in production, as we also provide subcontract machining services. After purchase, we provide operator training and can help set up production at the customer’s facility. We work with many clients under long-term partnerships, supplying additional machines as needed.

Condition: excellent (used), Year of construction: 2007, For sale: CNC LATHE GILDEMEISTER CTX 410 V6 with driven tools, Y-axis, sub-spindle TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V6 Control: Heidenhain 4290 Country of origin: Germany Year of manufacture: 2007 The machine is fully equipped with both static and driven tool holders. Machine specifications: - Turret: 12 stations for VDI-30 tool holders (all stations driven) - Max spindle speed: 5000 rpm - C-axis on both spindles - Driven tools - Y-axis - Sub-spindle - Max turning diameter X-axis = 320mm - Max turning length Z-axis = 600mm - High-pressure coolant system - Hydraulic 3-jaw chuck 250mm on the main spindle - Hydraulic 3-jaw chuck 200mm on the sub-spindle Ijdpszu Dd Tofx An Ioba - Main spindle through-hole (bore diameter 77mm) - Parts catcher - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 6 tons - Loading included in the price The machine has undergone a complete inspection. 100% operational. Connected and ready for operation. Stal-Com company has been dealing with the sale, service, and training on DMG group CNC machines for 20 years. We specialize in all models of Gildemeister lathes and Deckel Maho machining centers. All machines undergo a thorough technical inspection. Our machines are purchased not only by customers from Poland, but also from all over Europe and parts of Asia. Every machine can be inspected in operation, as we also provide CNC machining services. After purchasing a machine from us, we offer operator training as well as on-site production setup. We have long-term cooperation with many companies to whom we supply additional machine tools.

Condition: used, Year of construction: 2008, turning diameter / mm centre distance / mm swing diameter / mm Manufacturer: DMG GILDEMEISTER Model: CTX 510 eco Year of manufacture: 2008 Machine type: CNC lathe / turning center Control system: Siemens SINUMERIK 810D Powerline Max. spindle speed: 3,250 rpm Spindle speed range: approx. 500–3,250 rpm Spindle power: 33 kW at 40% duty cycle / 22 kW at 100% duty cycle Spindle torque: 630 Nm at 40% duty cycle / 420 Nm at 100% duty cycle X-axis travel: 300 mm Z-axis travel: 1,050 mm Max. turning diameter: 465 mm Max. swing / turning diameter: 680 mm Spindle bore / bar capacity: approx. 76–92 mm (depending on configuration) Front spindle diameter: 140 mm Turret: 12-station Driven tools: Depending on equipment Driven tool speed: up to 4,000 rpm Driven tool power: approx. 8.4 kW Chuck: 250 mm or 315 mm Max. workpiece weight between centers: 350 kg Total power requirement: approx. 50 kVA Power supply: 400 V, 50/60 Hz Machine weight: 7,500 kg Incl. chip conveyor Note: All technical specifications are for guidance only and are subject to change. Actual machine data may vary due to different equipment variants and subsequent modifications. No warranty or guarantee is provided regarding the accuracy or completeness of the technical specifications. The specifications and actual condition of the offered machine are the sole determining factors. Iedpfx Anszu A Ukj Ieba

Condition: good (used), Year of construction: 1998, functionality: fully functional, Siemens 840D control system, two turrets, all stations are powered, counter spindle, spindle bore 60mm, chip conveyor, FMB magazine loader, fire extinguishing system (as the machine operates with cutting fluid), extensive accessories. Ijdpjzu Awxjfx An Ioba

Condition: used, Year of construction: 2007, MAZAK TURNING CENTRE TYPE INTEGREX 200 IV S - 1000 mm The machine is supplied in standard configuration and equipped with the following options: - Through‑spindle coolant 15 bar - Synchronized tapping with milling spindle - Cylindrical interpolation and polar coordinates - 40‑tool magazine Capto C6 - Preparation for visual tool (visual tool probe) - Form/geometry compensation for rotary axes - 3D coordinate conversion - Management of rapid traverses - Preparation for flash tool (tool‑change flash tooling) - Simultaneous 5‑axis functions - Tool pivot point management - 5‑axis tool radius compensation - Part catcher (automatic part collector) - Double clamp pressure on the secondary spindle - Overload detector Maximum swing 660mm Swing over cross slide 660mm Iedpfozuy Tdox An Ijba Swing during Y-axis process 660 to 500mm Maximum machining diameter 660mm Through-hole diameter 76mm

Condition: used, Year of construction: 2005, functionality: fully functional, turning diameter over cross slide: 500 mm, turning diameter: 800 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 2,500 rpm, travel distance X-axis: 382 mm, travel distance Y-axis: 65 mm, travel distance Z-axis: 2,100 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 20 rpm, torque: 2,200 Nm, overall weight: 12,800 kg, CNC FANUC 180i with 3D software WORK AREA: Maximum turning diameter: 800 mm Turning diameter above the cross slide: 500 mm X-axis travel: 382 mm Y-axis travel: ± 65 mm Z-axis travel: 2,100 mm MAIN ELECTRIC SPINDLE: Spindle housing: 300 mm high, 5 mm Bar capacity: 121 mm Power (40/100% ED): 43/33 kW Torque (40/100% ED): 2,200/1,700 Nm Rotation speed: 20 - 2,500 rpm AXIS FEED RATES: Rapid traverse speed X/Z: 60/35 m/min TOOL TURRET: Number of tool stations: 12+6 Number of powered tools: 12 Iedpfezuy H Dox An Ieba Tool holder according to DIN 69880: 50 mm Power (40% ED): 15.7 kW Torque (40% ED): 50 Nm Rotation speed: 3,500 rpm Maximum clamping collet diameter: 26 mm TAILSTOCK: Sleeve travel: 150 mm Center mounting: CM 5 Maximum sleeve thrust: 1,800 daN Machine weight: 12,800 kg Machine complete with: -Steady rest -Set of fixed and powered tool holders -Operating manuals and CE declaration Year of manufacture: 2005

Condition: ready for operation (used), Year of construction: 2005, operating hours: 7,500 h, spindle motor power: 18,500 W, spindle speed (max.): 3,500 rpm, travel distance Y-axis: 120 mm, overall weight: 5,800 kg, number of axes: 4, This 4-axis DMG Mori Seiki SL 2500 Y was manufactured in 2005. It features a maximum swing diameter of 755 mm and a machining diameter of 390 mm, with a maximum machining length of 655 mm. The machine includes a 12-station turret and a programmable hydraulic tailstock. If you are looking to get high-quality turning and milling capabilities, consider the DMG Mori Seiki SL 2500 Y turn-mill centre we have for sale. Contact us for further details. • Capacity & working area: • Max. swing diameter: 755 mm • Max. machining diameter: 390 mm • Max. machining length: 655 mm • Bar capacity: 75 mm • Rapid traverse: 18 m/min (X) / 24 m/min (Z) • Guideways: Box ways on all axes • Main spindle & headstock: • Spindle torque: 640 Nm • Spindle nose: A2-8 • Chuck: 250 mm Kitagawa B-210 (metric) • Cooling: Daikin spindle oil chiller • Turret & live tooling: • 12-station turret (all stations motorized) • Turret indexing time: 0.2 s • Live tooling speed: 4,000 RPM • Live tooling motor: 5.5 kW • Tooling system: Sandvik Capto quick change tooling system (valued at €22,000–€24,000) • Tailstock & axes: • Axis configuration: 4-axis (X, Z, Y, C) • Tailstock: Programmable hydraulic tailstock • Tailstock taper: MT5 Morse taper • Control, software & measuring: • 3D graphic simulation via proprietary CAM software Ibodpezuymqjfx An Isa • Cycle time verification • Automatic load control & tool wear monitoring • Tool measurement: Automatic Renishaw tool presetter arm • Connectivity: USB, PCMCIA, RS-232 Additional equipment • Bar feeder interface (machine prepared) • Interface for Autoblok hydraulic steady rest (ready for installation) • Automatic parts catcher • Hinge-type side chip conveyor • Large assortment of static and live tool holders • Dual foot pedal (main chuck & tailstock operation) • Electrical transformer • Complete documentation: Parts list, electrical schematics, programming & operating manuals Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 820 mm turning length 6000 mm control Siemens Si 840 D sl max. workpiece weight between centres 4000 kg total power requirement 155 kW weight of the machine ca. 65 t dimensions of the machine ca. 16350 x 3700 x 3850 m Additional information Original purchase price in 2019: EUR 1.550.000,- Time recording from Feb. 2025 Operating hours = 38601 h Main spindle = 1958 h Milling spindle = 1760 h CNC control Si 840D sl Working area 6000 mm Working height 1390 mm Swing diameter over bed slide/bed 820 mm X-axis travel +850 -25 mm Z-axis travel 6820 mm C-axis, smallest increment +/-0.001° Workpiece spindle Spindle head according to DIN 55026 A15 Bathing through 160 mm Front diameter Bearing 240mm 2-stage gearbox, infinitely variable programmable Drive power at 100/60% duty cycle: 78/87kW Speed ranges: 2 Speed range I: 10-501 rpm Speed range II: 10-1750 rpm Torque I, 60% duty cycle: 8000 Nm Torque II, 60% duty cycle: 2308 Nm C-axis Holding torque with backlash-free spindle brake: 3000 Nm Speed: 0-50 rpm Maximum torque (100/60% duty cycle): 3700/4430 Nm Steady rest clamping range: 70-425 mm Turning, drilling, milling head Tool taper Capto C8 Tool magazine Storage locations: 2 magazines, Baluff chip system Max. tool diameter (each position/every 2nd position) 125/200mm Max. tool length 600mm Tool weight 25kg Tailstock Quick diameter 180mm Stroke 170mm Internal taper MK6 Iedpfozuygdjx An Ioba Axially force, manually adjustable 5-30 kN Quick tip height adjustment +/-0.15mm Other: Collision monitoring sensor ACS 3-ARTIS Chip conveyor system Coolant system 980l tank and more

Condition: excellent (used), functionality: fully functional, • Muratec MT 25 MYY / Robot Gantry Loader / Bar Loader. • Two C-axes. • Two Y-axes. • Highly automated machine. • 8 kg gantry loader-type robot for part loading and unloading. • 1.5-meter CNC bar loader. • Machine with 9 controlled axes. • Two twin spindles. • Two turrets. • Turrets with 15 positions each, all motorized. • Integrated spindle motor: 15 kW. • Motor starting torque: 420 N·m. • Motorized tool motor: 4 kW. • Spindle size: A2-6. • Maximum machining diameter: 370 mm. • Maximum machining length: 920 mm. • Bar feed: 67 mm. • Prismatic guides on all axes. • Two 250 mm Kitagawa hydraulic chucks on each spindle. • Separate compartment for inspecting machined parts. • Automatic finished-part pickup arm for small parts. • Automatic secondary spindle cleaning with air or coolant. Isdpfx Aezuxwuon Ieba • Conveyor belt for finished parts. • Automatic load control and tool wear monitor. • Part transfer system between spindles with automatic torque control. • Fanuc CNC. • Fanuc motors, servos, electronics, and programming. • Rapid traverse speeds: 20 and 25 m/min. • Main spindle speed: 3,500 rpm. • Motorized tool speed: 3,000 rpm. • Turret indexing time: 0.2 seconds. • Rear hinged chip conveyor. • Complete set of static tool holders for external and internal operations included. • Complete set of motorized axial and radial tool holders included. • Machine currently in operation. • Weight: 10,800 kg. • Immediate delivery, unless sold prior to listing.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * Y-axis. * C-axis. * 5-axis machine. Iedozuxm Aspfx An Ieba * 1.5-meter Lns Quick Load bar loader. * Sub-spindle. * 12-station turret, all stations motorized. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. * Direct-drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gear stages. * Main spindle size: A2-8. * Sub-spindle size: A2-6. * Bar capacity: 80 mm. * 250 mm Kitagawa B-210 main spindle chuck with metric system. * 210 mm Kitagawa B-208 sub-spindle chuck with metric system. * Prismatic guides on all axes. * Main spindle speed: 4,000 rpm. * Motorized tool speed: 6,000 rpm. * Daikin oil cooler for both spindles. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitor. * Rapid traverse speed: 30 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Installation interface for bar loader. * Automatic workpiece collector. * Dual pedal for independent opening and closing of the main spindle and sub-spindle. * Side-mounted hinged chip extractor. * Extensive range of static and motorized tool holders. * Electrical transformer. * Documentation, parts list, electrical schematics, programming, and operating manual. * Weight: 5,800 kg. * Machine is currently in operation. * It is essential to check the precision videos. * Immediate delivery, unless sold immediately.

Condition: used, Year of construction: 2008, control Siemens 840D powerline swing diameter 640 mm Ijdpfx Anezupqrs Isba turning diameter 640 mm spindle distance 1.930 mm x1 axis 550 mm y1-axis 220 mm z1 axis 1585 mm b-axis 240 ° x2-axis 225 mm z2-axis 1.400 mm z3-axis 1.500 mm chuck diameter 250 - 400 mm bar material dia. 90 mm spindle head 220 h5 spindle bore diameter 107 mm diameter in the front bearing 150 mm chuck diameter 400 mm bar material dia. 90 mm spindle head 220 h5 spindle bore diameter 107 mm diameter in the front bearing 150 mm turning speeds 3.200/4.000 U/min tool taper HSK63-A spindle tunring speed 12.000 U/min drive capacity - main spindle 100/40% ED 13,2/22 kW Torque (100% ED / 40% ED) 60/100 Nm bearing diameter 80/55 mm Number of working hours ca. 96.571 h spindle hours ca. 43.720 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: excellent (used), Year of construction: 2015, FANUC 31i-B control C-axis on both spindles Milling drive on the upper turret Milling drive on the lower turret Travel range – Y1 axis: 80 (+/- 40) mm Travel range – Y2 axis: 65 (+/- 32.5) mm Swivel range of B-axis: +/- 91° Incline angle: 90° Ibodpozum Tdefx An Isa MAIN SPINDLE Bar diameter: 42 mm Spindle diameter: 51 mm Spindle speed: 6,000 rpm Drive power – spindle motor max./continuous: 11 / 7.5 kW TAILSTOCK SPINDLE Bar diameter: 42 mm Spindle diameter: 51 mm Spindle speed: 6,000 rpm Drive power – spindle motor max./continuous: 11 / 7.5 kW TOOL TURRET Tool magazine positions, upper turret: 12 / 24 + 6 Tool magazine positions, lower turret: 12 / 24 INCLUDED Inclined bed filter system Hinged belt chip conveyor, discharge to the right Coolant system Material collection tray

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Iodszum Alopfx An Ieba Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: excellent (used), Year of construction: 2012, GILDEMEISTER - CTX 310 eco V3, year of manufacture 2012, spindle hours approx. 8000 hours Turning diameter 210 mm Turning length 580 mm Control system 840 D Siemens Center height 190 mm Turning diameter over the bed 330 mm Turning diameter over the compound slide 260 mm Spindle speed range - main spindle max. 4,000 rpm Drive power - main spindle 10 / 7.5 kW Max. torque 115 / 86 Nm Spindle bore 68.5 mm Usable bar diameter 51 mm C-axis 0.001 ° Travel - x 185 mm Travel - z 455 mm Number of tool positions 12 Tool holder VDI 30 Driven tool stations: 6 Tailstock travel 400 mm Iodpjzumn Uefx An Isba - Chuck including various jaws - 12 VDI 30 tool holders - Driven tools: none - Chip conveyor

Condition: excellent (used), DOOSAN PUMA 3100 XLY CNC LATHE ONLY 2163 RUN TIME HOURS !!!!! UPGRADED FANUC I CONTROL 305 MM HYD CHUCK 420 MM TURNING DIA 2125 MM TURNING LENGTH MAX SWING 850 MM MAX SWING OVER CROSS SLIDE 670 MM X TRAVEL 293 / Y TRAVEL 130 MM / Z TRAVEL 2190 MM FULL C AXIS AND Y AXIS HYD STEADY - SMW SLU-X-4-MS ( CAPACITY 30 - 245 ) MAX SPINDLE SPEED 2800 TOOL PROBING DRIVEN TOOLS - 2+2 + STATIC HOLDERS SPINDLE POWER 35 HP YEAR 2012 THIS MACHINE HAS BEEN ONE OWNER ONE OPERATOR SINCE NEW - NEVER REQUIRED A REALIGNMENT - IMPECCIBLE CONDITION THROUGHOUT LOCATION NORTHERN IRELAND LOADING - FREE TRANSPORT CAN BE PRICED - PLEASE GIVE FULL ADDRESS Ijdpfezumadjx An Ijba

Condition: excellent (used), Year of construction: 2013, operating hours: 60 h, functionality: fully functional, machine/vehicle number: NL254131163, spindle motor power: 18,500 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, type of input current: three-phase, total height: 2,200 mm, total length: 5,000 mm, total width: 3,050 mm, overall weight: 6,100 kg, MORI SEIKI NLX2500Y-700 Turning Cente Dimensions • Machine Depth: 3056 mm • Machine Height: 2187 mm • Machine Weight: 6140 kg Movement • Number of Axes: 5 • X-axis Travel: 260 mm • Y-axis Travel: 50 mm • Z-axis Travel: 795 mm Technical Specification • Spindle Speed: 4000 RPM • Tool Stations: 12 Additional Information • Swing over bed 920 mm • Swing over the cross-slide 742 mm • Maximum cutting diameter :366 mm • "maximum cutting length: 705 mm • Bar capacity: 80mm • Spindle motor power: 18. 5/15kw • Milling motor power: 5. 5kw, speed 10000 rpm • Rapid feedrates: xyz: 30 x 10 x 30m/minute • Tool setter, parts catcher, swarf conveyor • 3 jaw chuck, interlocked guards, low volt light Spindle nose: ASA 8" Tailstock: MT5 Tailstock quill diameter: 80 mm Tailstock travel: 734 mm Turret stations: 12 positions Motorized tool positions: 12 Turret tool coupling: BMT Turning tool size: 25 × 25 mm Isdpfx Aozukn Ejn Ieba Boring bar capacity: 50 mm Maximum driven tool speed: 6,000 rpm Driven tool motor power: 5.5 / 7.5 kW C-axis0.001° indexing Additional equipment Chip conveyor

Condition: used, Year of construction: 2005, Available immediately ex-yard: CNC turning and milling center Mori Seiki Type ZT 1500 YB Year of manufacture 2005 CNC control MSX 501 Main and counter spindle, 2 tool turrets, powered tool stations Turning diameter max. 310 mm Max. distance between spindle centers 1000 mm Max. turning diameter 190 mm Max. turning length 235 mm Spindle speeds 50 – 5000 rpm Drive power main spindle 22/18.5 kW Spindle bore 73 mm Chuck diameter 210 mm Bar diameter 52 mm Tool turret 2 Tool positions 2 x 16 stations Number of powered stations 2 x 16 stations Speeds of powered stations max. 6000 rpm Drive power each 5.5 / 2.2 kW Iodpozukghefx An Ioba Chip conveyor Coolant system Y-axis 1 x C-axis 2 x Counter spindle Powered stations 2 x Tool turrets 2 x Fixed tool holders 12 plus 10 Powered tool holders 6 plus 1 Bar loader IEMCA Master 880 MP – E Weight 10 tons

Condition: ready for operation (used), Year of construction: 1999, Available immediately from our location: 5-axis CNC turning and milling center WFL, Voest, Alpine, Steinel Type WFL M 30 – G Year of manufacture 1999 Siemens Sinumerik 840 C Turning length 1050 mm Diameter over slide 440 mm Turning spindle on the right Turning spindle on the left Main drive 37 kW Spindle speeds 10 – 5000 rpm Cross slide Counter spindle housing on the right Cross slide on the right Turning, boring, and milling unit IKZ (internal coolant) 90 bar Tool magazine with 96 positions Disc turret on the right, 2 x 12 positions C-axis on the left and right Hydraulic chuck on the left and right Chip conveyor Ibsdpfx Anszukgbj Isa Weight with accessories 12 tons Price: EUR 38,000.— plus VAT, ex works.

Condition: excellent (used), Year of construction: 2007, CNC Lathe SPINNER TC 65 2007 ----- Dimensions / Weight Dimensions L × W × H (without chip conveyor): 2.73 × 1.44 × 1.62 m Footprint: 3.93 m² Total weight: 4,200 kg Swing diameter over bed: 425 mm Distance between centers: approx. 600 mm Max. turning diameter: 310 mm Axes Max. travel X-axis: 230 mm Max. travel Z-axis: 740 mm Max. rapid traverse X-axis: 15 m/min Max. rapid traverse Z-axis: 24 m/min Main Spindle Speed (bore 32 mm): 4,500 rpm Spindle head Ø: 100 mm Max. Ø collet chuck: 250 mm Max. permissible collet jaw weight: 1.25 kg Spindle bearing diameter: 120 mm Capacity of clamping cylinder: 65 mm Tailstock Arbor diameter: 80 mm / MK4 Arbor stroke: 120 mm Adjustable travel of tailstock: 475 mm Max. clamping force (at 30 bar): 500 daN Turret Manufacturer: Sauter Type: 0.5.473.516 Ibedpfezudxdox An Iea Type with tool drive: 0.5.480.516 Coupling system: DIN 5482 with gear B15×12 Number of stations: 12 Tool holder: DIN 69880 / 30 mm Driven stations (only TC65-MC): 6 Speed of rotating tools (only TC65-MC): 6,000 rpm Torques Main spindle Fanuc (S6 40 %): 178 Nm Main spindle Siemens (S6 40 %): 301 Nm Driven tool TC65-MC, Fanuc (S6 40 %): 7 Nm Driven tool TC65-MC, Siemens (S6 40 %): 9.5 Nm

Condition: used, Year of construction: 2011, Doosan CNC lathe, Puma 2100MS Year of manufacture: 2011 Includes chip conveyor Location: Bad Tölz Inspection is welcome. Ibjdpfxszudn Eo An Ija We have other used machines available. Please contact us.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Technical data, prices, and images can be found in the PDF files attached. Ibsdpfx Aezuddyon Isa

Condition: excellent (used), Year of construction: 2014, operating hours: 60 h, functionality: fully functional, machine/vehicle number: NL202140731, spindle motor power: 15,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 590 mm, type of input current: three-phase, total height: 2,145 mm, total length: 3,820 mm, total width: 2,081 mm, spindle nose: A2-6, overall weight: 5,100 kg, CNC Lathes with Milling NLX2000Y-500, Mori Seiki Year: 2014 Bar Capacity 65mm C axis 0.001 degree Control MORI M730B Ibsdpfezua Egox An Ija Machine Dimensions 3820 x 2081 x 2145mm Machine Weight 5100kg Maximum Cutting Diameter 366mm Maximum Cutting Length 510mm Milling Motor Power 5.5/3.7kW Milling RPM 10000rpm Rapid Feedrates 30m/minute Spindle Motor Power 15/11kW Spindle Nose A2-6 Spindle Speed 5000rpm Spindle Taper MT #4 Standard Cutting Diameter 271mm Swing 923.8mm Swing 755mm Tailstock Body Travel 564mm Tailstock Quill Diameter 80mm Tool Size 25 x 25mm Turret Positions 12 Station X axis Travel 260mm Y axis Travel +/-50mm Z axis Travel 590mm