HydroPower Mühendislik Makina San.ve Tic. A.Ş.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 53,000 h, functionality: unexamined, workpiece diameter (max.): 150 mm, overall weight: 8,000 kg, Equipment: cooling unit, documentation/manual, For sale is a twin-spindle vertical turning machine for workpieces with a diameter of up to 150 mm. The machine was put into production in 2025 and is currently in our warehouse. The machine can be connected to the power supply for a demonstration. The machine features a 20-bar coolant system, chip conveyor, 8 tool positions per spindle, and an oil mist separator. It also includes an automatic part feeder with a part storage system. Djdpfx Ao Ah T Evsizocp Further information can be found in the technical data sheet, see below.

Condition: good (used), Year of construction: 2007, - Speed range: [rpm]: 6,000 - Torque: [Nm]: 480 - Max. turning diameter over bed: 290 mm - Chuck diameter: 200 mm - Turret: 12-position, VDI 40, Sauter - Driven tools: 7.8 kW - Travel: - X-axis: 550 mm - Z-axis: 200 mm - Rapid traverse (X/Z) [m/min]: 30 / 20 - Feed (X/Z): [m/min.] 11 kN - Features: - Left-hand chip conveyor; 300 mm wide; ejection height 800 mm - Probe; direct linear measuring system; glass scales on all axes - Heidenhain circulating pickup tape - Machine with feed belt for part loading - Specification: Dods Ahxrdopfx Aizscp - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit exchanged.

Condition: good (used), Year of construction: 2013, Ref. -No.: 10718 Manufacturer: REIDEN Type: RX 10 Year of construction: 2013 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Schweiz Machine-No.: 40-xxx Turning Speeds: 16.000 RPM X stroke: 1.000 mm Y stroke: 1.100 mm Z - stroke: 810 mm C-Axis: 360° Spindle power: 38 kW Tool Taper: HSK 63 Max. Rapid traverse: 60 m / min Further information: The machine is offered including all available accessories and technical documentation. Dcsdj Ahw Sijpfx Aizep The machine has been cleaned, is fully operational and can be inspected under power by prior appointment.

Condition: good (used), Year of construction: 2008, For sale: 1 Scherer VDZ 80 DS unit with the following technical specifications: Swing diameter: 120 mm Z-axis (vertical): 265 mm X-axis (horizontal): 280 mm Diameter at the front bearing: 85 mm Diameter at the rear bearing: 75 mm 2 x A4 spindle Drive spindle unit rated power: 16.8 kW Rated torque: 100 Nm Speed: 1000 - 7000 rpm Travel speed, Z-axis: max. 30 m/min Travel speed, X-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Note! This unit was part of a complete production line. A separate program is available. Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices exclude VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Dodpfxj Ahqymj Aizocp Machine Buying/Selling BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Do you need a high-quality, yet affordable machine for your production? Or do you want to sell yours? For further information or to contact us, please use the contact form.

Condition: good (used), Year of construction: 2004, For sale are 2 Scherer VDZ 80 DS units with the following technical specifications: Circumferential diameter: 120 mm Z-axis (vertical): 265 mm X-axis (horizontal): 280 mm Diameter at the front bearing: 85 mm Diameter at the rear bearing: 75 mm 2 x A4 spindle Spindle unit drive, rated power: 16.8 kW Rated torque: 100 Nm Speed: 1000 - 7000 rpm Travel speed, Z-axis: max. 30 m/min Travel speed, X-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Please note! The unit was part of a complete production line. However, it has its own individual program. Price is per unit! Upon request, transport and loading can be arranged throughout Europe for an additional charge. Prices exclude VAT. Inspection is possible by appointment. Please contact us, our team will be happy to assist you. Machine sales / purchases WE BUY / SELL PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Do you need a high-quality but affordable machine for your production? Or do you want to sell your machine? Dsdpfx Aio Ahqyiezocp For further information or to contact us, please use the contact form.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10657 Manufacturer: EMAG Dodps Ahmv Hefx Aizscp Type: EMAG VTC 250 Year of construction: 2008 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Hakberstadt Country of origin: Germany Turning Length: 630 mm Tool Taper: VDI 40 Turret places: 1 Pcs Number of tool stations: 12 pc Turning Speeds: 5000 RPM Chuck diameter: 250 mm Further information: - The machine features an overhead drive spindle with a tailstock at the bottom. - Coolant tank, approx. 1,000 L, including - a paper filter roll. - Clamping devices: Hainbuch clamping top, including various centering tips - Gripping devices on the turrets for feeding and removing raw and finished parts during magazine operation. - Magazine loading - Vertical pick-up lathe, which can generally be easily upgraded for automatic loading and unloading. The machine can be viewed while powered on by prior arrangement.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10436 Manufacturer: SCHERER FEINBAU Type: VDZ 120 rechts Year of construction: 2010 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840 Dcodpfx As Ahmuwsizjp Storage location: Halberstadt Country of origin: Germany Machine-No.: 660XX Turning Speeds: 5500 RPM Swing Diameter: 260 mm Rapid Travel Speed X-Axis: 60 m / min Rapid Travel Speed Z-Axis: 30 m / min Travel -X Axis: 626 mm Travel -Z Axis: 250 mm Spindle bearing diameter: 32 mm Rated speed: 1200 1 / min Turret places: 12 Pcs Machine length: 1685 mm Machine width: 2400 mm Machine Height: 2850 mm Weight Of The Machine Ca.: 8 t Further information: Spindle head with short taper DIN 55026: A6 Pallet conveyor WPS KNOLL system (2010) SAUTER turret (12 places) Documentation available Tools in the pictures are sold with the machine. Machine can be inspected and demonstrated under power.

Condition: used, Year of construction: 2001, swing diameter max. 450 mm chucking diameter 400 mm control C 200-4 (Siemens 840 C) Index Max. rpm 4.200 min/-1 Dcsdpfx Aj Ahkfveizop power capacity - main spindel ( 35,5 / 56 ) kW max. Torque ( 340 / 550 ) Nm C-Axis 0,001 ° number of toolpositions 2x 12 pos driven statition 2x 12 pos worktool system VDI 30 max. spindle speed driven tools 6.000 U/min. power capacity - driven tools 9,5 kW max. Torque 40%: 19 Nm Y - Axis +/- 90 mm B-Axis +270° / -90 ° x-axis 730 mm z-axis 340 mm y-axis +/- 90 mm b-axis +270° / -90 ° rapid traverse X: 40 / Z: 30 m/min numbers of pallets 24 pos. size of pallet 410 x 300 mm max. workpiecediameter 300 mm max. workpiece weight incl. Pallet: 25 kg Chain width 75 mm band speed 7,5 m/min total power requirement 56 kW weight of the machine ca. 9,0 t dimensions of the machine ca. 8,5 x 6,0 x 2,7 m CNC - Vertical Lathe INDEX - V 300 Y/B - incl. 24 pos. palett changing system Schnaithmann - incl. ball screw as spare part - incl. 39x driven tools - incl. 39x tool holders

Condition: used, Year of construction: 2008, controller manufacturer: Siemens, controller model: 840D - Powerline, _____ Description: Year of manuf. : 2008 Dedpfx Ao Ahghboizocp Control : Siemens 840D - Powerline Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):27 kW Torque (max.):145 Nm Clampingcylinder:Full-clampingcylinder Workpiececlmaping:3-Jaw chuck, Röhm KFD-HS 200 Subspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):27 kW Torque (max.):145 Nm Clampingcylinder:Full-clampingcylinder Workpiececlmaping:Mandrel, Hainbuch Type 211 Gr. 3 Toolcarrier I: Technology:Turret with 12 stations Taper:VDI 30 Tooldrive:6.000 rpm, 9,5 kW, 20 Nm Toolcarrier II: Technology:Toolclampingsurface for toolholder with coolant supply Taper:T-Slots Toolcarrier III: Technology:Turret with 12 stations Taper:VDI 30 Tooldrive:6.000 rpm, 9,5 kW, 20 Nm In general: Movement in X1/Z1:1.160/260 mm Rapid travers in X1/Z1:80/40 m/min Movement in X3/Z3:540/260 mm Rapid travers in X3/Z3:40 m/min Equipment/Accessory: Positionsensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbeltfilter and High-pressure, 20 bar Rawmaterialfeed:Circulation systems for Storage, Schnaithmann Finished partremoval:Workpieceunloading device with conveyor belt, Schmid Extraction:Interface mechanical prepared Further Equipment:Rinsing pistol Further Accessory:Misc. used static and driven Toolholder. mandrels

Condition: good (used), Year of construction: 2010, workpiece weight (max.): 20 kg, spindle speed (max.): 4,500 rpm, turning diameter: 250 mm, workpiece diameter (max.): 240 mm, spindle bore: 52 mm, CNC vertical turning center Manufacturer: EMAG Type: VSC 250 Duo DD Year of manufacture: 2010 / 2012 Control system: Siemens 840D sl Technical data: Max. turning diameter: 250 mm Max. swing diameter: 260 mm Main spindle: Max. speed: 4,500 rpm Max. torque: 250 / 340 / 460 Nm Spindle bore: 52 mm Chuck diameter: 250 mm Tool turret: Number of turrets: 2 Number of tool positions: 12 Max. tool diameter: 50 mm Max. workpiece weight: 20 kg Max. workpiece diameter: 240 mm Feeds: Rapid traverse (x / z): 45 / 30 m/min Total power consumption: 66 / 75 kW Dsdj Agr Epopfx Aizecp Machine weight: approx. 16 / 18.5 tons There are 3 identical machines available, 2 manufactured in 2010, 1 in 2012. Technical features & accessories: - Marposs measuring system - Open automation - W10 loading portal - Safety guard - Minimum quantity lubrication - In-process quality control - Central coolant supply (not included) - Chip conveyor Price per machine. Accessories, tools and clamping devices shown in the images are only included in the scope of delivery if this is stated in the additional information.

Condition: good (used), Year of construction: 2010, workpiece weight (max.): 20 kg, spindle speed (max.): 5,000 rpm, turning diameter: 140 mm, torque: 256 Nm, spindle bore: 52 mm, power: 45 kW (61.18 HP), CNC vertical turning center Manufacturer: EMAG Type: VTC 250 LEAN Year of manufacture: 2010 Control: Siemens 840D sl Technical data: Max. turning diameter: 140 mm Max. turning length: 700 mm Dcedpe Agr Edjfx Aizop Max. swing diameter: 376 mm Main spindle: Max. speed: 5,000 rpm Max. torque: 256 Nm Spindle bore: 52 mm Chuck diameter: 250 mm Tool turret: Number of turrets: 1 Number of tool positions: 5 + gripper / 11 + gripper Max. tool diameter: 125 mm Max. tool weight: 10 kg Max. tool length: 120 mm Max. workpiece weight: 20 kg Feed rates: Rapid traverse (x / z): 40 / 30 m/min Total power consumption: 45 kW Machine weight: approx. 12 tons There are 6 identical machines available. Technical features & accessories: - Open automation - Safety device - Preparation for extraction - Handling infeed and outfeed - Central extraction (not included) - Central coolant supply (not included) - Chip conveyor (1 for 3 machines) Price per machine. Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is mentioned in the additional information.

Condition: good (used), Year of construction: 2011, workpiece weight (max.): 20 kg, turning diameter: 250 mm, torque: 256 Nm, power: 45 kW (61.18 HP), CNC vertical turning lathe Manufacturer: EMAG Type: VTC 250 Year of manufacture: 2011 / 2012 Control: Siemens 840D sl Technical data: Max. turning diameter: 250 mm Max. turning length: 630 / 730 mm Max. swing diameter: 140 / 260 mm Main spindle: Max. speed: 3,500 / 4,000 rpm Max. torque: 256 Nm Spindle bore: 50 / 52 mm Chuck diameter: 250 mm Tool turret: Number of turrets: 2 Max. tool weight: 10 kg Max. tool length: 90 mm Max. workpiece weight: 20 kg Dcodpfxe Agr Dyj Aizep Feeds: Rapid traverse (x / z): 40 / 30 m/min Total power requirement: 45 kW Machine weight: approx. 14 / 16 tons There are 2 units manufactured in 2011 and 1 unit manufactured in 2012 available. Technical features & accessories: - Year of manufacture 2011: Number of bed and cross slides: 2 - Year of manufacture 2012: Number of bed and cross slides: 1 - Tool monitoring - Protective guard - Collision monitoring - In-process quality control - Central coolant supply (not included) - Chip conveyor Price per machine. Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is noted in the additional information.

Condition: ready for operation (used), functionality: fully functional, Brand: KDM Dedpfx Aio Af I U Tszecp Model: KTM-12/16 Category: CNC vertical turning centers Year of construction: installed in September 2014 CNC control: FANUC Series 0i-TD Machining capabilities: - Maximum turning diameter: 1,600 mm - Maximum turning height: 1,300 mm - Table/chuck diameter: 1,250 mm - Hydraulic chuck diameter: 1,250 mm - Maximum table load: 6,000 kg - Distance from table surface to spindle nose: 1,205 mm Rotary table with C-axis: - Table rotation speed: 1–350 rpm - Gear range: 2 gears - Low range: 1–87.5 rpm - High range: 1–350 rpm - C-axis rotation speed: 0–2 rpm - Minimum C-axis indexing: 0.001° - Maximum table torque: 19,100 Nm RAM head with motorized spindle: - X-axis travel: -250 / +1,480 mm - Z-axis travel: 1,000 mm - Motorized spindle speed: 10–2,500 rpm - Spindle gear range: 2 gears - Low range: 10–625 rpm - High range: 10–2,500 rpm - Spindle mounting: ISO 50 (7/24 no. 50) - Tool holder type: DIN 69871 - RAM section: 240 × 240 mm - External tool section: 40 × 40 mm Tool magazine: - Tool magazine capacity: 24 positions - Tool holder mounting: ISO 50 – DIN 69871 Equipment and accessories: - 6-jaw hydraulic chuck AUTOBLOK, diameter 1,200 mm - 6 original machine jaws included - RAM head with motorized spindle for milling and drilling operations - C-axis with minimum indexing of 0.001° - RENISHAW workpiece measuring probe - Tool presetting system - 24-position automatic tool magazine

Condition: used, CNC Vertical Lathes (2) DOOSAN V400 - CNC Control Model: Fanuc i-series - Spindle Nose: ASA 8 - Max. Turning Diameter: 500 mm - Max. Turning Length: 450 mm - Main Spindle Speed: 3,000 RPM - First Turret Tool Stations: 12 - X-Axis Travel: 265 mm - Z-Axis Travel: 490 mm The machines can be inspected under power at our warehouse in Gussago (BS), Italy. Dcedps Ad Hbdjfx Aizsp Mimu Macchine Utensili

Condition: used, BOEHRINGER / VDF NV 250 T is a CNC vertical turning machine designed for precision machining, high accuracy and reliability. Total axes 4; spindle hole 65 mm; travels Z 260 mm, X 760 mm, Y ±50 mm; rapid traverse X 120 m/min, Z 40 m/min; turret 12 positions VDI 40/DIN 69880. Spindle head A6; stepless up to 4500 t/min; spindle power 31 kW; voltage 50 Hz 3x 400 V; machine weight approx. 8500 kg. Equipment: 3-jaw chuck Ø250 mm with automatic centering, lamp, coolant system, oil mist extractor, automatic loading/unloading unit. Achieves tight tolerances; typical for automotive, aerospace, medical and machine tool sectors Dodpfxe Adzhle Aizocp

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Equipment: documentation/manual, Vertical turning center equipped with live tooling (M-specification), C-axis and an automatic loading/unloading system for efficient serial production. The machine is fitted with a 12-station turret, hydraulic chuck, chip conveyor and integrated automation. Technical Data - Max. turning diameter: Ø280 mm - Max. turning length: 200 mm - Spindle speed: 40-4,000 rpm - Through-spindle bore: Ø62 mm - Live tooling speed: 45-4,500 rpm - C-axis with 0.001° indexing - 12-position V12 turret - Spindle motor: 22/15 kW (peak/continuous) Dcodpfs Ady I Rex Aizjp Operating Hours - Power-on time: 27,694 h - NC run time: 9,703 h - Spindle time: 8,888 h - Cutting time: 7,515 h Equipment - Live tooling - C-axis - Hydraulic chuck - Automatic loading/unloading system - Parts handling conveyor - Chip conveyor - Full enclosure Machine is in good working condition and can be inspected under power by appointment.

Condition: ready for operation (used), functionality: fully functional, Two machines with extensive equipment and an attractive accessory package! Both machines share a common chip conveyor, which ensures efficient chip removal. In addition, a coolant tank has been retrofitted, which provides a valuable extension to the equipment. A particular advantage is the comprehensive accessory package: the scope of delivery includes various tool holders, clamping jaws, and a new driven tool (AGW). Dodpez Tc Iysfx Aizocp

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 300 mm, travel distance Z-axis: 900 mm, total height: 5,800 mm, total width: 5,500 mm, overall weight: 26,000 kg, controller manufacturer: FANUC, controller model: 0i-TC, product length (max.): 7,200 mm, number of axes: 2, Vertical turning machine manufactured in 2009. This SMTCL QTC 20090 features a maximum turning diameter of 2,000 mm and a turning height of 1,600 mm. It includes a manual 4-jaw chuck with a diameter of 1,600 mm and a 12-position tool changer magazine. If you are looking to get high-quality turning capabilities, consider the SMTCL QTC 20090 machine we have for sale. Contact us for further details regarding this machine. • CNC control: FANUC 0i-TC with 10.4" screen • Mobile vertical crossbar with 5 indexing positions • CE safety equipment Dcsdpfx Ajz Sy Tkeizep • Manual 4-jaw chuck diameter: 1,600 mm • Maximum turning diameter: 2,000 mm • Maximum turning height: 1,600 mm • Chuck speed: 1–254 rpm (2 ranges) • Motor power: 55 kW (30-minute rating) • RAM cross-section: 220 × 220 mm • 12-position tool changer magazine • Electrical supply: 380 V ±10% Additional equipment • Direct measurement system: HEIDENHAIN • RENISHAW tool presetting system • Turning tool holder • Chip extractor • Work light • Access cover and stairs Technical Specification Driven Tools No

Condition: excellent (used), Year of construction: 2007, operating hours: 60,000 h, functionality: fully functional, travel distance X-axis: 240 mm, travel distance Z-axis: 450 mm, chuck outer diameter: 381 mm, spindle speed (min.): 2,500 rpm, turning diameter: 580 mm, total length: 2,900 mm, total height: 2,770 mm, total width: 2,700 mm, turning length: 450 mm, turning height: 450 mm, overall weight: 13,000 kg, Equipment: documentation/manual, Used DOOSAN Mecatec V450TM twin-spindle CNC vertical turning centre, fitted with FANUC Series 18i-TB CNC control. The machine has been modified with two SAUTER VDI50 tool turrets, each offering 12 tool stations and driven-tool capability (24 tool positions in total). C-axis. Turret arrangement supports combined turning, drilling and milling operations. Djdpfoz Sx Nkjx Aizscp

Condition: ready for operation (used), Year of construction: 1990, number of axes: 2, Vertical turning machine manufactured in 1990. This KOLOMNA 1540 F1 features a maximum turning diameter of 4,100 mm and a maximum workpiece height of 2,000 mm. It is equipped with CNC-controlled rams and a powerful 115 kW motor. If you are looking to get high-quality turning capabilities, consider the KOLOMNA 1540 F1 machine we have for sale. Contact us for further details. • Plate diameter: 4,000 mm • Maximum turning diameter: 4,100 mm • Maximum workpiece height: 2,000 mm • CNC-controlled rams: 2 • Ram travel: 1,250 mm • Motor power: 115 kW • Retrofitting: Mechanical, hydraulic, electrical and electronic systems renewed in 2007 Dsdpfoz R Rchex Aizecp Additional equipment • Chip extractor • Complete enclosure • Cooling system • Work light • Refrigerated electrical cabinet • Self-centering chuck, diameter 2,500 mm (removable; installed on one of the two machines) Technical Specification Driven Tools No

Condition: used, Year of construction: 2016, controller manufacturer: Siemens, controller model: Sinumerik, _____ Description: Year of manuf. : 2016 Control : Siemens Sinumerik General: Year of construction:2016 Control:Siemens Sinumerik Chuck diameter:170 mm Swing diameter:240 mm Travel X/Z:720 / 300 mm Spindle: Speed:6,000 rpm Chuck:3-jaw chuck SMW Autoblok KNCS-N 170-43 Dcedpfxez Htpge Aizep Tool carrier: Technology:Turret, 12 stations Tool holder:VDI 42 Driven tool holders:Yes Automation: Technology:Integrated workpiece storage Features / Accessories: Chip disposal:Chip conveyor Coolant filtration:KNOLL band filter system (type 240 S-1) Fire protection:Kraft & Bauer argon extinguishing system

Condition: used, Year of construction: 2006, functionality: fully functional, turning diameter: 1,000 mm, controller model: Siemens 840 D, tool length: 500 mm, number of slots in tool magazine: 44, TECHNICAL DETAILS Working area Swing diameter: 1,000 mm Swinging diameter: 1,000 mm Z-axis travel: 900 mm MACHINE DETAILS Dcodpfxsz Hmc Te Aizjp Control system: Siemens 840 D Tool holders: SK 50, VDI 60 Tool magazine: 44 positions Tool weight: max. 35 kg Tool length: max. 500 mm

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 220 mm, travel distance Z-axis: 400 mm, spindle motor power: 22,000 W, spindle speed (max.): 3,000 rpm, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: Series 18i-TB, number of axes: 2, Vertical turning machine manufactured in 2007. This DOOSAN PUMA V400-2SP features a maximum turning diameter of 400 mm and a turning height of 400 mm. It includes dual 8/12-station turrets and operates with a FANUC Series 18i-TB CNC control. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA V400-2SP machine we have for sale. Contact us for further details regarding this machine. • Control feature: Independent dual-channel operation (Right & Left) • Machine condition: Good working condition, currently under power • Max. turning diameter: Ø 400 mm • Max. turning height: 400 mm • Max. swing over bed: Ø 490 mm • Chuck size: 315 mm • Spindle nose: A2-8 Dcjdpfx Aoz Hb Htoizjp • Turrets: 2 × 8/12-station turrets • Guideways: Box guideways (heavy duty) Additional equipment • Rear/side chip conveyor with cart • High-pressure coolant system Technical Specification Driven Tools No

Condition: good (used), functionality: fully functional, workpiece weight (max.): 10,000 kg, turning diameter: 1,600 mm, workpiece diameter (max.): 1,800 mm, overall weight: 15,000 kg, grinding spindle motor power: 30 W, spindle diameter: 14,000 mm, FOR SALE: Heavy-Duty Sedin 1516 Vertical Turret Lathe – Retrofitted with Siemens Control! Are you looking for a reliable and efficient solution for machining heavy-duty components? Available now is a classic of Soviet manufacturing, the Sedin 1516 vertical turret lathe, upgraded to meet modern standards with a high-quality Siemens retrofit! Technical Specifications (Sedin 1516): Manufacturer: Sedin (Krasnodar, USSR) Model: 1516 Table Diameter: 1,400 mm Max. Turning Diameter: 1,600 mm Max. Workpiece Height: 1,000 mm Dcsdpfsz E Nn Aox Aizep Max. Workpiece Weight: 5,000–10,000 kg (depending on exact configuration and condition) Main Motor Power: approx. 30 kW Machine Weight: approx. 18,000–19,200 kg Major Upgrade: Siemens Retrofit! The original control system of this machine has been replaced with a modern Siemens CNC control system, providing several key advantages: Enhanced Precision and Repeatability: Modern digital control ensures exact machining performance. User-Friendly Interface: Siemens controls are renowned for their logical and easy-to-use operator interface. Modern Features: Enables programming of more complex machining steps and tool paths. Extended Service Life and Maintainability: Siemens components are readily available and far easier to service compared to original vintage electronics. Condition and Additional Information: The machine has been in professional use and maintained regularly. The Siemens retrofit was completed in [add year], giving the machine a new lease on life. This is an excellent opportunity to acquire a heavy-duty, high-performance vertical turret lathe that combines Sedin's rugged mechanical durability with modern Siemens control technology.

Condition: used, Year of construction: 1986, RAFAMET UBD150N wheel lathe Range of wheel tread diameters: 700 to 1,300 mm Maximum wheelset weight: 3,500 kg Djdpfsz A Ehtsx Aizecp