CHIRON Croatia d.o.o.

Condition: repair required (used), Year of construction: 1998, operating hours: 34,188 h, functionality: limited functionality, machine/vehicle number: 18455, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, torque: 165 Nm, controller manufacturer: Siemens, total height: 2,500 mm, total length: 10,000 mm, total width: 6,000 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 12,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 19,000 W, number of spindles: 1, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, We are offering a Starrag Heckert CWK 400D horizontal machining center from 1998, which requires repair. Manufacturer: Starrag Heckert Model: CWK 400D Machine type: Horizontal machining center Year of manufacture: 1998 Condition: Requires repair Cjdpfx Aie Ah Sn Sszeri If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2003, DMG DECKEL MAHO DMU 70 eVolution – 5-Axis CNC Universal Milling Machine Manufacturer: DMG / DECKEL MAHO Model: DMU 70 eVolution Year of Manufacture: 2003 Machine Type: CNC Universal Machining Center / 5-Axis Milling Machine Control System: HEIDENHAIN iTNC 530 Condition: Used Technical Data Working Area and Axes Number of Axes: 5 Travel in X-axis: 750 mm Travel in Y-axis: 600 mm Travel in Z-axis: 520 mm NC Swivel Rotary Table with B and C axes Table Size: 700 × 500 mm Main Spindle Manufacturer: Kessler Credpfo Ah I A Uex Aizoi Motor Spindle, Year of Manufacture 2022 Installed by DMG MORI Service: March 2023 Spindle Operating Hours since Installation: approx. 2,100 h Maximum Spindle Speed: 18,000 rpm Tool Holder: HSK-A63 Tool Changer Automatic Tool Changer Tool Magazine: 60 positions Control System HEIDENHAIN iTNC 530 Electronic Handwheel Operating Mode 4 Coolant System Through-Spindle Coolant (TSC): 40 bar Coolant Tank: 600 liters Programmable Coolant Nozzles Flush Gun Equipment and Accessories NC Swivel Rotary Table (B/C axis) Automatic 60-position Tool Changer Kessler High-Frequency Motor Spindle Chip Conveyor Oil and Emulsion Mist Separator Infrared Measuring Probe HEIDENHAIN TS 641 Electronic Handwheel Through-Spindle Coolant with 40 bar Programmable Coolant Nozzles Flush Gun Not Included in Scope of Supply: Zero-Point Clamping Plate Vise Condition: Used: See Video and Pictures Positive: In March 2023, a new Kessler motor spindle (year of manufacture 2022) was installed by DMG MORI Service. Since installation, the spindle has only accumulated approximately 2,100 operating hours. RMS Safety System The machine is equipped with a retrofitted MORI SEIKI RMS system (location/relocation safety). Terms of Sale Sale as used Inspection possible by arrangement Dismantling, loading, and transport for an additional charge Sale exclusively to commercial businesses Sale with exclusion of liability for defects, as far as legally permissible Invoice with VAT shown.

Condition: excellent (used), Year of construction: 2006, Control: Mazatrol Matrix Nexus Travel ranges X/Y/Z: 730 x 730 x 740 mm Codpfx Ais Ah Iz Nozsri Spindle speed: 18,000 min-1 Tool magazine for 120 tools, SK 40 2-position pallet changer Pallet size: 500 x 500 mm NC rotary table (4th axis) High-pressure coolant system through the spindle, 60 bar

Condition: good (used), Year of construction: 2001, functionality: fully functional, CNC Horizontal Machining Center Deckel Maho DMC60H Year: 2001 Approx. 55,000 operating hours The machine has been regularly maintained, is fully functional, and is currently ready for demonstration while powered on. TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control system: Siemens Sinumerik 840D Spindle speed: 15,000 rpm Tool interface: HSK-A63 Rapid traverse rate X/Y/Z: 60.00 m/min Tool magazine: 90 tools Crsdpfxs Ah H Txe Aizji EQUIPMENT Number of axes: 4 Pallet changer (RS4) with 6 positions Coolant system with internal coolant supply at 40 bar Chain magazine: 90 tool positions Chip conveyor Tool laser measurement system BLUM Electronic handwheel MACHINE DETAILS Total power requirement: 65.00 kW Drive power 40% duty cycle: 20.00 kW Drive power 100% duty cycle: 13.00 kW Machine weight: approx. 16.00 t Space requirement: approx. 9.00 x 4.50 x 3.50 m

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Modern 5-axis machining center for the complete and highly efficient production of “BLISK” (integral rotor blade assemblies) - Year of construction: 2019 - Maximum diameter of the rotor disc: Ø750 mm - Travel range X-axis: 700 mm - Travel range Y-axis: 400 mm - Travel range Z-axis: 400 mm - Swivel range A-axis: 360° (continuous rotation) - Swivel range B-axis: ±87° - Rapid traverse rate X-axis: 62 m/min - Rapid traverse rate Y-axis: 62 m/min - Rapid traverse rate Z-axis: 62 m/min - Rapid traverse rate A-axis: 200 rpm - Rapid traverse rate B-axis: 60 rpm - Maximum spindle speed: 18,000 rpm - Spindle motor power: 28 kW - Torque at 100% load: 181 Nm - Tool interface: HSK-A63 - Tool magazine capacity: 62 positions (ATC) - Maximum tool diameter: Ø150 mm - Maximum tool length: 250 mm - Maximum tool weight: 6.5 kg Crsdpfxo Ah E Tvj Aizoi - Tool change time: 8 s - Tool change system: Dual gripper - Overall length: 5000 mm - Overall width: 3260 mm - Overall height: 3200 mm - Machine weight: 12,000 kg Equipment - Coolant filtration system: KNOLL – paper filter system - Chip conveyor: KNOLL 450-K1 - Laser tool measuring system: BLUM - Measuring probe: RENISHAW - Cooling unit: STARRAG - Flushing gun - Chip container - Electronic handwheel - Operating manuals

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 1380.02, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,700 mm, feed rate X-axis: 24 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 24 m/min, controller manufacturer: Siemens, controller model: Sinumerik 840D, table load: 3,000 kg, spindle speed (max.): 14,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 364, tool length: 700 mm, tool weight: 40,000 g, Equipment: documentation/manual, For sale: horizontal CNC machining center mCm Action 2600. Technical specifications: Working range: Table dimensions: 125 x 1250 [mm], axis travels X/Y/Z: 2600/1600/1700 [mm] Table load capacity: 3000 kg Control system type: Siemens – Sinumerik 840 D Spindle: HSK 100; spindle power: 35 kW; spindle speed: 14,000 rpm Axis positioning accuracy: 0.01 [mm] – axis measurement system: optical scales Axis feed rate (rapid traverse): 24,000 mm/min Cooling system type: tool cooling – no; spindle cooling – yes Cutting fluid – yes – external/internal through the spindle (25 bar) Number of axes: 4-axis machine Drive type: servo drives Machining range: diameter: 2750 mm; height: 1750 mm Additional equipment: Tool magazine: number of positions: 364 Maximum tool length: L = 700 mm; Maximum tool weight: 40 kg Material feeding system: loading station at the pallet magazine Crodpfxs Ahpn So Aizei Pallet system – 4 pallets and 1 pallet loading station and 1 machine table – a total of 6 pallets Chip removal system – yes Cooling system – control cabinet air conditioning: yes; spindle cooling: yes Workpiece measuring probe – no; tool breakage detection system – yes Central vacuum cleaner for cleaning parts from chips and cutting fluid residue – yes Operating manual – paper version in German, digital version in German. The buyer is responsible for arranging the container, packaging, and transportation company.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10670 Manufacturer: STARRAG HECKERT Type: CWK 500 D Year of construction: 2002 Type of control: CNC Control: HEIDENHAIN TNC 426 Storage location: Halberstadt Country of origin: Germany X-Travel: 750 mm Y-Travel: 750 mm Z-Travel: 700 mm Max. Tool Weight: 10 kg Max. Tool Length: 400 mm Max. Tool Diameter: 160 mm Crodpe Ahky Eofx Aizji Max. Size Of Workpiece Lxwxh: 85 mm Tool Piece Magazine With: 80 Pcs./pcs. Spindle taper: HSK63 Spindle Speed: 15.000 RPM Max. Torque: 350 Nm axes: 4 Rapid Traverse: 40 m / min Internal cooling: 50 bar Numbers Of Pallets: 2 Max pallet load: 500 kg Size Of Pallet: 500 x 500 mm pallet change time: 9 s Machine width: 4000 mm Machine Height: 3300 mm Weight Of The Machine Ca.: 15 t Further information: The machine is currently in active production and can be inspected under power and in operation by prior arrangement.

Condition: good (used), Year of construction: 2005, Ref. -No.: 10669 Manufacturer: STARRAG HECKERT Type: CWK 400D Year of construction: 2005 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 625 mm Y-Travel: 650 mm Z-Travel: 650 mm Max. Tool Weight: 10 kg Max. Tool Length: 350 mm Max. Tool Diameter: 80 mm Tool Taper: HSK-A63 nach DIN 69893 Numbers Of Tools In Magazin: 60 Spindle Turning Speed - Stepless: 50-10.000 RPM Numbers Of Pallets: 2 Max pallet load: 400 kg Size Of Pallet: 500 x 400 mm pallet change time: 8/5 s coolant reservoir: 1100 L. Machine length: 5800 mm Machine width: 4800 mm Weight Of The Machine Ca.: 12,8 t Spindle power: 24 / 37 kW Further information: Equipment Csdps Ahkyzefx Aizsri Pallet changer Chain-type tool magazine with 60 tool positions KNOLL coolant system with fleece filter Internal and external emulsion cooling Renishaw probing system Tool breakage detection in the tool magazine Chip conveyor Sound shower (noise reduction system) Paper band filter Coolant gun at the setup station Fully enclosed working area in accordance with safety regulations Automatic pallet sequence operation Network connection Ethernet interface Technical documentation Installation layout / foundation plan The machine is currently in active production and can be inspected under power and in operation by prior arrangement

Condition: good (used), Year of construction: 2008, operating hours: 54,682 h, functionality: limited functionality, machine/vehicle number: 211934, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, feed length X-axis: 730 mm, feed length Y-axis: 730 mm, feed length Z-axis: 740 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 57 kVA, controller manufacturer: Mazatrol, controller model: Mazatrol Matrix Nexus, workpiece length (max.): 800 mm, workpiece width (max.): 800 mm, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 700 kg, total height: 2,814 mm, total length: 4,690 mm, total width: 2,330 mm, table width: 500 mm, table height: 1,100 mm, table length: 500 mm, table load: 700 kg, rotary table diameter: 500 mm, rotational speed (min.): 35 rpm, rotational speed (max.): 18,000 rpm, overall weight: 11,000 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 25,876 h, coolant supply: 8 bar, distance table to spindle center: 830 mm, distance table center to spindle nose: 810 mm, spindle motor power: 25,000 W, spindle mount: MK 1, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 40, mount diameter: 100 mm, input voltage: 480 V, Equipment: chip conveyor, documentation/manual, We are selling a used Mazak HCN Nexus 5000 machining center, manufactured in 2008, with a dual-pallet changer. This is a well-maintained machine from its first owner, and it can be inspected while powered on. Photos and a technical description can be found in the attachment. Crjdj Agnq Hjpfx Aizsi

Condition: like new (used), Year of construction: 2017, operating hours: 10,000 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, Base Machine - SH-5000P - Demonstration Machine Like New • Basic machine, 4-axis • Control: Siemens 840D sl • Table size: 500x500mm • Max. table load: 500kg • X/Y/Z travels: 730/730/830mm • X/Y/Z rapid traverse: 60/60/60 m/min • Milling spindle: • HSK63 • 30/50kW • 18,000 rpm • Tool magazine with 40 stations • Automatic pallet changer • Automatic loading door • Hydraulic unit • Oil separator • Oil mist extraction • Air conditioning unit for electrical cabinet • External measuring systems, linear axes • Media feed under pallets Crjde Af Ui Repfx Aizji • Central lubrication • Door interlock • Coolant unit • Internal cooling with 70 bar high pressure • Coolant and compressed air gun • Chip conveyor • Documentation in German, digital

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10160, travel distance X-axis: 800 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 805 mm, rapid traverse X-axis: 38 m/min, rapid traverse Y-axis: 38 m/min, rapid traverse Z-axis: 38 m/min, total height: 3,500 mm, total length: 7,000 mm, total width: 6,000 mm, overall weight: 17,000 kg, number of slots in tool magazine: 180, tool length: 600 mm, tool diameter: 250 mm, tool weight: 35,000 g, STARRAG HECKERT CWK 500 Horizontal Machining Center Crodpfo Afnc Eox Aizoi - Tool holder: HSK A 100 - Min. distance from the front edge of the working spindle to the center of the pallet: 150 mm - Min. distance from the center of the working spindle to the top edge of the pallet: 100 mm - Max. permissible height of workpiece and clamping devices for changing the work area: 900 mm - Workpiece side (pallet) with hole grid according to DIN 55201, clamping surface: 500 x 500 mm - Max. load per pallet (centered): 800 kg - Guide bore diameter: 20 H6 - Centering bore diameter: 50 H6 - Number of mounting threads: 23 x M12 - Distance of the guide bore to the center of the table: diameter 200 +- 0.013 mm - Interference circle diameter: 800 mm - Max. table rotation: 18 rpm - Automatic pallet changer - Pallet changer with rotating setup station - max. pallet change time: 10 sec - Pallet change time with clamping hydraulics: min. 12 sec - Feeds: X/Y/Z axis: continuously adjustable working feed range: 1 - 38,000 mm/min - Working spindle diameter in the front bearing: 100 mm - Max. tool diameter with free neighboring positions: 250 mm - Max. tool diameter for bridge tools: 500 mm - Max. tool diameter with occupied neighboring positions: 125 mm - Tool overhang length: 600 mm - Max. tool weight: 35 kg - Average tool weight with full occupancy: 10 kg - Max. imbalance in the tool magazine: 100 kg - Number of pallets: 2 With Balluff system, technical documentation, with RENISHAW 3D measuring probe, including 30 HSK 100 tool holders, mostly equipped with tools. Transport: The machine can most likely be transported on a truck with a width of up to 3000 mm. FCA D-01445 Radebeul - loaded onto a truck

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 030 515 428, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Fanuc G-Tech 16i, table length: 500 mm, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 600 mm Main spindle speed: 50–12,000 rpm Spindle mount: BT 40, JIS B 6339 Big+ Cjdj Afhlaepfx Aizjri Tool magazine capacity: 120 tool positions Preparation for tool magazine capacity: 240 tool positions Pallet changer: 2 pallets Pallet storage: 6 pallets Table size: 500 mm x 500 mm MACHINE DETAILS Operating hours: approx. 73,000 h CNC control: Fanuc G-Tech 16i Tool magazine: 120 positions Internal cooling: 70 bar Coolant pressure: switchable in 3 stages Coolant pump output: 5.5 kW Coolant flow rate: 17 l/min at 70 bar Coolant pressure: 70 bar External coolant pump: 100 l/min at 1.4 bar Filter capacity: approx. 250 l/min Dimensions of the coolant system (L × W × H): approx. 2,200 × 1,500 × 2,250 mm EQUIPMENT 6-position pallet changer 4th axis Knoll high-pressure system Tool magazine with 120 tool positions, prepared for 240 tool positions Tool changer with 31 tool positions Loading and setup station 2 spiral chip conveyors KNOLL coolant system with scraper conveyor and lift pump Coolant pump KTS25-50 for coolant supply through the spindle External coolant pump Coolant shower Precision NC rotary table instead of the indexing table Direct measuring system and control extension for the B-axis CE marking Tool breakage monitoring Automatic tool length correction Rotating viewing window Note: The machine has already been dismantled.

Condition: good (used), Year of construction: 2013, operating hours: 35,050 h, functionality: fully functional, machine/vehicle number: NS4330, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 600 mm, feed length Y-axis: 600 mm, feed length Z-axis: 600 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 52 kVA, controller manufacturer: FANUC, controller model: 31i, workpiece height (max.): 750 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, total height: 3,020 mm, total length: 5,363 mm, total width: 2,500 mm, table width: 450 mm, table height: 1,200 mm, table length: 450 mm, table load: 400 kg, rotary table diameter: 450 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 15,000 rpm, overall weight: 11,500 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 50 bar, spindle motor power: 22,000 W, spindle nose: BT40, number of slots in tool magazine: 120, tool length: 350 mm, tool diameter: 140 mm, tool weight: 8,000 g, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer a Toyoda FH450S, 4-axis horizontal CNC machining center, manufactured in 2013 (April 2013), purchased new and installed at our facility in 2015. It is in good used condition. Manufacturer: Toyoda (JTEKT) Model: FH450S Serial Number: NS4330 Year of Manufacture: 2013 Condition: Used, good condition Main Specifications: - CNC Control: FANUC 31i (1,000 programs, 499 tool offsets, 48 coordinate systems, Ethernet card, program restart) - X/Y/Z Travels: 600 / 600 / 600 mm - 2 pallet changers, 450 x 450 mm, with automatic pallet changer (7 s) - Maximum load per pallet: 400 kg; maximum workpiece size Ø 630 x 750 mm - B-axis: continuous NC table, resolution 0.001° - Spindle: BT40, 50 - 15,000 rpm, power 22 / 18.5 kW (30 min / continuous) - Rapid Traverse Rates X / Y / Z: 50 m/min; roller guides - Positioning Accuracy: ±0.003 mm, Repeatability: ±0.0015 mm - Tool Magazine: 120 positions (expanded from 60); tool change time 1.2 s - Power Supply: 380 V - 3-phase - 50 Hz, 52 kVA - Machine Weight: 11,500 kg; footprint 2,500 x 5,363 mm, height 3,020 mm Additional Equipment: - Coolant through spindle with 30 µm fabric filter and approximately 800-liter tank - Pump: 45 l/min at 50 bar - Toyoda chip evacuation system with 70 bar pump and cyclone filter - Knoll chip conveyor for cast iron and aluminum, oil skimmer - Renishaw RMP60 probe with software and measuring programs - Toyoda OP Supporter 20i tool load monitoring system Cedo Ad Rn Uepfx Aizjri - BTS sensors for thermal expansion of axes and spindle - Preparation for FMS Fastem connection - Manuals: 3 sets of Toyoda and 2 sets of Fanuc; CE marking Machine Hours (as of 10/07/2026): 35,050 h - Parts Produced: 87,681 Clamping devices, tools, and tool holders: to be agreed upon. Complete technical data sheet with photos available upon request. Available for viewing by appointment. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2013, operating hours: 29,512 h, functionality: fully functional, machine/vehicle number: NS4331, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 600 mm, feed length Y-axis: 600 mm, feed length Z-axis: 600 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 52 kVA, controller manufacturer: FANUC, controller model: 31i, workpiece height (max.): 750 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, total height: 3,020 mm, total length: 5,363 mm, total width: 2,500 mm, table width: 450 mm, table height: 1,200 mm, table length: 450 mm, table load: 400 kg, rotary table diameter: 450 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 15,000 rpm, overall weight: 11,500 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 45 bar, spindle motor power: 22,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 120, tool length: 350 mm, tool diameter: 140 mm, tool weight: 8,000 g, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer a Toyoda FH450S, 4-axis horizontal CNC machining center, manufactured in 2013 (March 2013), purchased new and installed at our facility in August 2016. It is in good used condition. Manufacturer: Toyoda (JTEKT) Model: FH450S Serial Number: NS4331 Year of Manufacture: 2013 Condition: Used, good condition Key Specifications: - CNC Control: FANUC 31i (1,000 programs, 499 tool offsets, 48 coordinate systems, Ethernet board, program restart) - X / Y / Z Travel: 600 / 600 / 600 mm - 2 perforated pallets, 450 x 450 mm, with automatic pallet changer (7 s) - Maximum pallet load: 400 kg; maximum workpiece size Ø 630 x 750 mm - B-axis: NC rotary table, resolution 0.001° - Spindle: BT40, 50 - 15,000 rpm, power 22 / 18.5 kW (30 min / continuous) - Rapid Traverse Rates X / Y / Z: 50 m/min; roller guides - Positioning Accuracy: ±0.003 mm, repeatability ±0.0015 mm - Tool Magazine: 120 positions (expanded from 60); tool change time 1.2 s - Power Supply: 380 V - 3-phase - 50 Hz, 52 kVA - Machine Weight: 11,500 kg; footprint 2,500 x 5,363 mm, height 3,020 mm Additional Equipment: - Through-spindle coolant with 30 µm fabric filter and approximately 800-liter tank Csde Ad Rhnepfx Aizeri - Pump: 45 l/min at 50 bar - Toyoda chip evacuation system with 70 bar pump and cyclone filter - Knoll chip conveyor for cast iron and aluminum, oil skimmer - Probe

Condition: good (used), Year of construction: 2014, functionality: fully functional, Operating hours and spindle hours: 23.323 / 15.894 CNC control: Siemens 840D sl TECHNICAL DATA: X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 880 mm Max. spindle speed: 12.000 rpm Max. torque: 102 Nm Tool taper: SK40 Max. workpiece weight per pallet: 500 kg Max. workpiece diameter: 630 mm Max. workpiece height: 900 mm B-axis (table) 360° x 0,001° Number of tool positions: 40 FEED RATES Max. feed rate: 60.000 mm/min Rapid traverse: 60 m/min Jog feed rate: 0 – 5.000 mm/min Crodpfxs Aa S T Ro Aizji Total power requirement: 57 kVA Machine weight: approx. 11.5 tonnes Space requirement: 5.5 x 3.0 x 2.8 m EQUIPMENT AND ACCESSORIES 2-station pallet changer; pallet size: 500 x 500 mm Chip conveyor, high-pressure coolant system (40 bar) Through-spindle coolant supply, tool changer, documentation B-axis (table) 360° x 0,001° Heidenhain touch probe

Condition: good (used), Year of construction: 1998, Good working condition. Parts shown by hand not come. Technical data are shown on picture. Retrofit on control unit 2016. Siemens 840 SL. Cedpfj Aaz Rxex Aizsri

Condition: used, Year of construction: 2008, travel distance X-axis: 630 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 710 mm, controller manufacturer: Fanuc, controller model: 160iS-MB, total height: 2,771 mm, total length: 5,855 mm, total width: 2,555 mm, table width: 500 mm, table length: 500 mm, table load: 400 kg, overall weight: 820 kg, spindle speed (min.): 1,000 rpm, spindle speed (max.): 12,000 rpm, spindle nose: Mas BBT 40, number of slots in tool magazine: 60, Equipment: chip conveyor, CNC Horizontal Machining Center OKK HP 500S Technical details: CNC Control Fanuc 160is-MB Csdpfs Aawapex Aizori Pallet table size 500 x 500 mm Number of pallets 2x Table load 400 kg X-axis travel: 630 mm Y-axis travel: 620 mm Z-axis travel: 710 mm Indexing of table 0,001° Spindle holder MAS BBT 40 Spindle speed 100 - 12.000 rpm Spindle motor 11/7,5 kW Positions in the tool magazine 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. We sell this machine at a special price called “as seen”. This means that we do not check the condition of the machine.

Condition: good (used), Year of construction: 2014, Parts shown by hand not come. Csdpfx Aoz U Tiksizori

Condition: good (used), Year of construction: 2005, operating hours: 33,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Okuma, controller model: OSP E100, table width: 500 mm, table length: 500 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 15,000 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Horizontal machining center Okuma MB 500H with a 2-position pallet changer Cjdjz Tc Uyjpfx Aizjri Year of manufacture: 2005 Control system: Okuma OSP E100M Technical data: Spindle speed: 10 - 15,000 rpm Drive power: 26 kW Tool holder: BT 40 Number of magazine positions: 60 Internal coolant pressure: 70 bar Travel distances: X-axis: 800 mm Y-axis: 800 mm Z-axis: 800 mm 4th axis: Index 1° Number of pallets: 2 Pallet size: 500x500 mm Accessories: - Coolant system, type ConSep 2000, by Mayfran - Chip conveyor, type ConSep, by Mayfran - Tool breakage monitoring in the magazine - Workpiece coolant shower

Condition: used, Year of construction: 2011, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller manufacturer: MORI SEIKI, controller model: M730BM, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 500 kg, overall weight: 11,100 kg, Equipment: chip conveyor, With dual pallet, Mori Seiki M730BM control system. Cjdpfx Asz Sqrkjizori Workholding and tooling not included. AVAILABLE: late January/early February 2027.

Condition: good (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, controller model: Fusion 640M, workpiece height (max.): 710 mm, workpiece diameter (max.): 730 mm, workpiece weight (max.): 500 kg, total height: 3,050 mm, total length: 10,145 mm, total width: 9,850 mm, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 11,600 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 15 bar, spindle motor power: 30 W, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, We are pleased to offer this Mazak FH 5800 with the Mazak Palletech system. This machine was manufactured in 2001 and is fitted with the Mazatrol Fusion 640M control system. It is a robust and precise machine, suitable for efficient machining and batch production. Thanks to the horizontal spindle and pallet configuration, the machine is suitable for versatile machining operations and high productivity. The Mazak Palletech automation system enables more efficient and unmanned production. Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 10 Table load capacity: 500 kg X-axis travel: 710 mm Y-axis travel: 610 mm Z-axis travel: 660 mm Table indexing: 360° in 1° increments Spindle mount: DIN 69871A/40 Spindle speed: 35 – 15,000 rpm Spindle motor: 30/22 kW Magazine capacity: 120 positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. Cjdjz Rmq Tepfx Aizeri About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Matrix, workpiece height (max.): 100 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 700 kg, total height: 2,813 mm, total length: 5,985 mm, total width: 3,056 mm, table width: 500 mm, table length: 500 mm, table load: 700 kg, overall weight: 11,000 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 15 bar, spindle motor power: 35 W, number of spindles: 1, number of slots in tool magazine: 80, Equipment: chip conveyor, documentation/manual, We are pleased to offer this Mazak HCN 5000-II horizontal machining centre. This machine was manufactured in 2007 and is fitted with the tried-and-tested Mazatrol Matrix control system. A robust and precise machine, suitable for efficient machining and batch production. Thanks to the horizontal spindle and pallet configuration, the machine is suitable for versatile machining operations and high productivity. Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 2 Table load capacity: 700 kg X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 740 mm Table indexing: 0.001° Spindle mount: CAT 40 Spindle speed: 35 – 18,000 rpm Spindle motor: 35/26 kW Magazine capacity: 80 positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: Csdpfoz Rmn Eex Aizori With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: Matsuura G-tech (Fanuc), controller model: 16i, workpiece height (max.): 750 mm, workpiece diameter (max.): 650 mm, workpiece weight (max.): 400 kg, total height: 2,635 mm, total length: 5,870 mm, total width: 3,440 mm, table width: 500 mm, table length: 500 mm, table load: 400 kg, overall weight: 13,700 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 25 bar, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, We are pleased to offer this well-maintained Matsuura H-Plus 405 with pallet pool. This is a highly compact machine with extensive machining capabilities and 240 tool positions in the magazine. The machine was manufactured in 2004 and is equipped with the Matsuura G-Tech 16i (Fanuc 16i) control system. Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 6 Table load capacity: 400 kg X-axis travel: 600 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table indexing: 0.001° Spindle mount: Mas BT40 Big Plus Spindle speed: 50 – 15,0001 rpm Spindle motor: 22/18.5 kW Magazine capacity: 240 Crodpfx Aez Rmk Teizoi We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Fusion 640M, workpiece height (max.): 1,000 mm, total height: 3,050 mm, total length: 9,850 mm, total width: 10,145 mm, overall weight: 11,600 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 22 W, Equipment: chip conveyor, documentation/manual, We are pleased to offer this very well-maintained Mazak PFH 5800 with the Mazak Palletech system. This horizontal machining centre is a flexible, automated production system and is suitable for unmanned production. The machine was manufactured in 2004 and is fitted with the Mazatrol 640M control system. Cjdpfoz Rmh Ejx Aizeri Technical specifications: Pallet table size: 500 x 500 mm Number of pallets: 10 Table load: 700 kg Movement X-axis: 730 mm Movement Y-axis : 730 mm Movement Z-axis : 740 mm Table indexing: 360 x1 ° Spindle Taper: CAT 40 Spindle speed: 12.000 1/min Spindle motor: 22/15 kW Magazin capacity: 80 Required floor space: 9850 x 10145 mm We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,012 h, functionality: fully functional, machine/vehicle number: 31-46644, The HELLER MCi 16.2 is a high-precision, CNC-controlled horizontal machining center from the German manufacturer HELLER. The machine is designed for productive and flexible series production (e.g., in mechanical engineering or the automotive sector). Equipment: -Horizontal spindle, pallet changer with rotary table, additional 4-position pallet changer (manufacturer RILE RSP-MC+16.2, year 2004, serial number: 0421635093) -2nd operator terminal, chain-type tool changer with approximately 80 positions, chip conveyor (manufacturer Knoll 600K, coolant/lubricant treatment with band filter, control cabinet, separate cooling unit (manufacturer BKW) Control: -Siemens 840D Accessories: -Telescopic drawer cabinet (8 drawers) with attached work surface, workbench (1-door) with partition, lighting fixture Contents: various machine accessories Attractive offer – flexible & worry-free We offer you not only a high-quality product, but also customized financing options that adapt to your needs. Whether it's a down payment, installment payments, or individual financing models – together we will find the right solution. Cjdsz N Ewijpfx Aizjri If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes and errors!