Arth-Pax Kft

Condition: used, operating hours: 500 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Turn fine-grained biomass into uniform pellets with a complete pelletizing system: pellet press, material bunker, drum sieve with conveyor belt and big-bag handling, all from one manufacturer. Njdpfxez Rwims Akmodc This EcoKraft RP22 system is built around the second-generation RP22 press, developed for fine-grained biomass. It has built-in steam extraction from the pressing chamber and two central lubrication points, which keeps it compact and easy to operate. Only one system available. This is a single used system, not ongoing stock. Once sold, it is gone. Pickup and transport slots are limited (press alone: 650 kg). Best for: pelletizing fine-grained biomass (for example fertiliser, wood or plant-fibre mixes) indoors, protected from the weather, with 400 V three-phase power. Not suitable for: outdoor use, unattended operation, or explosion-risk areas (no explosion protection is included as standard). What the equipment means in practice: RP22 GEN2 press, max. 22 kW: powerful press for fine material, with steam extraction from the pressing chamber Bunker 1 m³ with screw discharge and level sensor: the sensor sends a start/stop signal that controls filling of the press Vibration pads on compressed air: help prevent material bridging in the bunker Drum sieve with conveyor belt: screens out fines and collects them in a big bag Complete package (as supplied by EcoKraft AG): • Pellet press RP22 with automatic central lubrication • Pneumatic grease system for 18 kg buckets with 18 kg food-grade grease bucket • Digital water dosing pump 54 l/h • Die 6x20 mm, 45° pre-compression • Material bunker 1 m³ with screw discharge, level sensor and vibration pads • Drum sieve with conveyor belt 6mm sive + 4 mm sive • Big-bag racks: 1x Vario 1.0 and 3x Vario 1.5 (stackable) • Big bags: 1x 90x90x110 cm and 5x 95x95x150 cm Technical data: Press: 1.70 x 0.80 x 1.70 m, 650 kg, max. 22 kW, 63 A CEE plug (50 A upstream fuse required), customs tariff no. 84793010 Drum sieve: Ø300 x 1200 mm, height adjustable, side feed left or right, max. discharge height 1800 mm Conveyor: length 3600 mm, discharge height 2600 mm, belt width 150 mm, 49 cleats, 0.75 kW Manufacturer: EcoKraft AG, Germany, with manufacturer CE declaration Condition: used. Bought second hand in like-new condition, then used by us for approx. 500 operating hours. The bunker is a demo unit with light signs of use. Location: 6064 Kerns (self pick-up, transport by arrangement). Price: EUR 70,000. Why you can buy with confidence: approx. 500 operating hours in our own use, complete scope as listed, manufacturer documentation available, in-person inspection in Kerns by appointment. Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the system is what this listing says it is, complete and functional when you see it. We do not promise throughput or pellet quality for your material, which is why we ask about your application first. Speed bonus: buy by October 27, 2026 and receive EUR 2,000 off, so EUR 68,000 instead of EUR 70,000. Valid until October 27, 2026, or until the system is sold. Action: send us your material, required capacity and destination. We will confirm suitability and provide a transport estimate.

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 10,000 kg, power: 264 kW (358.94 HP), input voltage: 400 V, 2 used Salmatec presses, type Maxima 840/125 LF Suitable for compressing sawdust, with forced feed. The presses are equipped with an automatic grease lubrication system for the rollers and main shaft bearings. In addition, there is a lifting beam on the press for changing rollers and dies. The motors are 132 kW and of the Hoyer brand, manufactured in 2016, IE3 efficiency class. The presses have always been maintained by Salmatec and have recently been fitted with refurbished rotors. Several rollers and dies are included with the presses. Interested or would you like more information? Please feel free to contact us for specifications, photos, and price. Ndsdjz I Tzxepfx Akmoc

Condition: excellent (used), Year of construction: 2013, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 24480, input voltage: 400 V, The Amandus Kahl flat die pellet press, type 37-850, is a robust industrial machine manufactured by the German machine builder Amandus Kahl for the compaction of various materials. Key technical data (type 37-850) Ndedoz I Tktepfx Akmoc • Die diameter: 850 mm • Roller diameter / width: 350 mm / up to 130 mm • Number of roller rolls: 4 pieces • Roller speed: approx. 2.5 m/s • Drive motor power: 132 (at 1500 min⁻¹)

Condition: excellent (used), Year of construction: 2014, Pellet production line ZEPPI ! Njdpfx Ajz I S Svokmedc Capacity - 2t/h Pellet press - ZEPPI 132 Kw Year - 2014 Exellet condition !

Condition: ready for operation (used), functionality: fully functional, suction capacity: 20,000 m³/h, production capacity: 1,300 unit/h, No minimum price – guaranteed sale to the highest bidder! The hammer mill (year of manufacture 2021) has only approximately 2 operating hours! The system is suitable for straw, hay, alfalfa, compost, wood, and other agricultural raw materials! Ndsdpfjz Ar D Rox Akmoc TECHNICAL DETAILS Capacity (material-dependent) max.: 1,300 kg/h MACHINE DETAILS Hammer mill power: 75 kW Pellet press: 75 kW, without control unit Bale shredder: 35 kW, including control unit Dust filter capacity: 20,000 m³/h, including control unit Operating hours Entire line: approx. 1,500 h Hammer mill: approx. 2 h EQUIPMENT Pellet press Conveyor belt Elevator Pellet cooler with screen Buffer tank with discharge 2 cyclones with rotary valve airlock Fan for cooler extraction New die Various used spare parts 10 m feed table for the bale shredder Bale shredder, including control unit Hammer mill, including control unit Centrifugal separator Big bag station for dust filter Dust separation technology: EU-ATEX Directive 2014/34 Positive dust explosion assessment from 2023 Note: The line has already been dismantled and is ready for loading.

Condition: used, Year of construction: 1994, operating hours: 392 h, functionality: limited functionality, machine/vehicle number: 1115, type of input current: three-phase, total height: 150 mm, total length: 2,200 mm, total width: 900 mm, overall weight: 1,800 kg, power: 11 kW (14.96 HP), input voltage: 380 V, Equipment: documentation/manual, Brand: Pawert Type: I-40/85 Year of construction: 1994 Capacity: 150 kg/hour Briquette dimensions: Ø 40 mm Motor: 11 kW Weight: 1800 Ndsdpfezyau Eox Akmjc Including feed screw and discharge chute.

Condition: used, SPE Renergi Low Temperature Dryer. Nsdpfxjzvq Rcj Akmjdc The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 35 000 EUR (VAT is not included)

Condition: used, Münch RMP 660 pellet press for the production of wood pellets and biomass pellets from sawdust, wood shavings and other organic waste materials. The machine is suitable for industrial pellet production, offering high pressing capacity and consistent pellet quality. Ideal for wood processors, sawmills and biomass plants. Ndodszryyropfx Akmsc Technical data: - Screen: 6 mm - Motor: 2 x 90 kW - Inner diameter of die: approx. 660 mm - Number of press rollers: 2 - Pressing capacity: up to approx. 3–5 t/h

Condition: refurbished (used), Year of construction: 2026, Pellet Press for Sale Njdpfxszq E Ave Akmjdc Manufacturer - General Dies Engine Power - 200 Kw Capacity - 2,2 t/h Year - 2014 / 2026 Reconditioned

Condition: new, Year of construction: 2023, We offer this new pellet press, manufactured in 2023. Manufacturer: Artmash (Ukraine) Year of manufacture: 2023 Production capacity: 700-900 kg/hour Die: 6mm Condition: new (10 tons produced for testing) Spare parts included: 2 dies and rollers Category ID: 917 Njdpfx Aszh Hd Nekmsdc Type ID: 2701 Type: pellet press If you have any questions or require further information, please send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, suction capacity: 20,000 m³/h, production capacity: 1,300 unit/h, No minimum price – guaranteed sale to the highest bidder! The hammer mill (year of manufacture 2021) has only approximately 2 operating hours! The system is suitable for straw, hay, alfalfa, compost, wood, and other agricultural raw materials! TECHNICAL DETAILS Capacity (material-dependent) max.: 1,300 kg/h MACHINE DETAILS Hammer mill power: 75 kW Pellet press: 75 kW, without control unit Bale shredder: 35 kW, including control unit Dust filter capacity: 20,000 m³/h, including control unit Operating hours Entire line: approx. 1,500 h Hammer mill: approx. 2 h EQUIPMENT Pellet press Conveyor belt Elevator Pellet cooler with screen Buffer tank with discharge 2 cyclones with rotary valve airlock Fan for cooler extraction New die Various used spare parts Nedpozgf A Usfx Akmjdc 10 m feed table for the bale shredder Bale shredder, including control unit Hammer mill, including control unit Centrifugal separator Big bag station for dust filter Dust separation technology: EU-ATEX Directive 2014/34 Positive dust explosion assessment from 2023 Note: The line has already been dismantled and is ready for loading.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 9825, The 2024 general overhaul includes, among other things, the die head, hydraulic nut, bearings, main shaft, oil pump with filter, and synthetic oil. Only the steel housing is older but is in excellent condition. The images of the production line in the hall date from before the overhaul. The individual images of the Amandus Kahl pellet press show the condition after the overhaul. TECHNICAL DETAILS Ndodezaricopfx Akmec Motor power: 110 kW Sawdust capacity: 2.5 – 3 t/h Biomass capacity: 3 t/h Bran capacity: 3.5 – 4 t/h Straw capacity: 2 – 2.5 t/h L/D ratio: 3.67:1 MACHINE DETAILS Dimensions of press (W x H): 1,450 x 1,900 mm Diameter of press: 2750 mm Insertion depth: 6 mm Press length: 22 mm Year of manufacture of motor: 2024 Year of manufacture of cooler with sieve: 2015 Year of manufacture of conveyor belt: 2015 Year of manufacture of feed screw: 2015 EQUIPMENT Amandus Kahl C35-780 pellet press with base plate New 110 kW electric motor Electric control cabinet with emergency stop Complete electrical documentation Conveyor belt Sieve system with automatic cooling Hydraulic nut Die head Electrical wiring Metering screw for product feed Automatic metering system for filling 4 additional dies, 6 mm 60 liters of additional synthetic oil 7 new bearings 2 new wear rings 1 new air filter 2 new oil seals 1 new oil filter 1 new oil pump 20 liters of 800/460 synthetic oil 1 new thrust piece (main shaft) Documentation of overhauled and renewed parts

Condition: used, Pellet press Ndedpfx Akey E Rrbemec Manufacturer: CPM Model: 7930-4 Year: 2019 Complete with feed mixers

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, Complete pellet production line, consisting of: Wood chip feed hopper 8m³ Hammer mill 22 kW Nodpfx Aey Ayiwekmedc Chip bunker with 3 discharge openings Screw conveyor with dosing unit (binder) Walw pellet press Conveyor belt Pellet cooling bunker with packaging unit and fine particle screening

Condition: new, Year of construction: 2026, Bio Machines has been designing production lines, manufacturing machinery, and providing assembly services for over 20 years. We offer both complete production lines and individual machines, tailored to your needs. Our solutions include: Pellet production lines Briquette production lines Drying systems: rotary and belt-type Hammer mills Moving floors Feed bins Wood chippers Chain, bucket, screw, and belt conveyors Cyclones Silos Pellet coolers Sawdust and pellet sifters Bagging machines for small bags and big bags Palletizing lines for bags And many other specialized machines Njdpfx Ajylm Tyokmsdc

Condition: used, functionality: fully functional, Performance for 6 mm diameter pellets 2.5-3 t/h We used it for about 5 years. It was purchased used but in very good condition. All bearings were replaced 1 year ago. It was working very well before it was disassembled. Ndedpfx Akex S Ibgomjc A new die with rollers has been manufactured for it and is available for an additional price. For additional information, please write on Whatsapp.

Condition: new, functionality: fully functional, Equipment: documentation/manual, | price list | prices | prices | prices | prices | prices | prices | prices | > > > > > ecomas.pl/price-list < < < < < You can view the prices at the very bottom of the listing: Documents / 20215835-01.pdf We offer a high-quality, low-speed pellet granulator. The pellet mill is 100% manufactured in our plant at ECOMAS Polska Czernikowo. We guarantee equipment designed to operate continuously in a 24/7 system. Our machines produce pellets that meet EU standards – properly compacted, free of harmful additives, with a calorific value of at least 4.6 kWh/kg. The main advantage lies in modern, hardened dies and rollers (60HRC+), manufactured with CNC technology. Our dies ensure high efficiency, low power consumption, and long service life of both dies and rollers. Another benefit is the lubrication of the main shaft with oil and oversized bearings, which significantly slows down wear! Are you struggling with your current granulator – bearing failures, low efficiency, clogged die, high power consumption, rapid wear of parts, etc.? With our machines, these problems disappear. We approach each customer individually! See how our machines produce, type in YouTube: ecomas_polskie_peleciarki Available power options: 7.5kW, 11kW, 15kW, 18.5kW, 22kW, 30kW, 37kW, 45kW up to 55kW. Composition: - complete head with 2/3/4/5 rollers on cylindrical bearings - welded body – fully filled with Orlen Oil Transol VG 320 - cylindrical-bevel gearbox (efficiency 98%) - base frame - bolted dies fi 230, fi 260, fi 285, fi 310, fi 400, fi 520; hole diameters 3, 4, 5, 6, 8, 10mm (100% stability, easy disassembly, and temperature control) - standard oil tank or optional tank with pump and oil installation (oil lubrication, easy oil replacement) Ndsdpfx Aksxk Ta Nomoc - user manual - 12-month warranty The buyer receives a detailed operating manual and a one-year warranty. We provide full warranty and post-warranty service.

Condition: used, Granulation and packaging line. Model: HM700E PRO 11KW Year of manufacture: 2022 It includes: Nedpfx Akoxcy D Eomodc Hammer mill - shredder Chip mixer Chip feeder Granulator Vibrating table Product feed belt (conveyor belt) Pellet hopper with packaging equipment Bag sealer and chip moisture meter Hammer mill with cyclone Motor: 11 kW / 400 V Productivity: 300 - 700 kg / h Weight: 360 kg Soft start installed Cutting system 16 hammers Chip mixer: Volume: 1.0 m³ Chip feeder: Motor: 3.3 kW / 380V Feeds up to 800kg / h Granulator: Motor: 22 kW / 380V/50hz; Productivity: 300 - 700 kg/h Weight: 590kg Soft start installed Vibrating table: Weight 90kg Product feed belt (conveyor belt): Dimensions: 5m × 0.4m. Automated packaging equipment: Dimensions: 1, 90x2, 50x2, 30 Volume: 1.5m³ Packing in bags: 1 - 50kg Equipped with two types of scales Bag sealer 220V Moisture meter

Condition: used, Year of construction: 1985, functionality: fully functional, For sale: granulator from the renowned manufacturer Buhler. Njdpfxow Uh Nzs Akmodc Granulator model: DPAA-660 Motor power: 160 kW – option to install a more powerful motor – 200 kW. Die diameter: 660 mm, Die working width: 160 mm, Granulator output on straw / sawdust: 2 – 2.5 t/h The granulator is currently dismantled. For a committed buyer, we will assemble it using new wear parts. Contact for more photos and details. Machine available for inspection in Sępólnie Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Condition: used, Pellet presses Manufacturer: Bühler Model: RPWPR 900.138 EX 4 presses - Bühler 3-4 tons per hour 4 mixers 4 feed screw conveyors Nsdpsw Iy T Sefx Akmsdc 20 m long stainless steel chain conveyor 16 m long output conveyor Soft starters

Condition: used, Ražotājs: Munch Modelis: 420 Ražîba: 1 tonna stundā Elektrojauda: 2x75 kW Diametrs 420 mm Komplektā ar dzesētāju pēc kapitālā remonta clear Nedpfxswfqn Ae Akmjdc 134 / 5,000 Translation results Translation result Manufacturer: Munch Model: 420 Production: 1 ton per hour Electric power: 2x75 kW Diameter 420 mm Complete with cooler after overhaul

Condition: used, Year of construction: 1988, height adjustment type: hydraulic, 1x Used KAHL C39 - 1000 Pellet Press Pelletmill Incl. Hydraulic nut Incl. 4 Roller head Incl. 5 Roller head Incl. various spare parts Njdpfx Asv N Rdaokmodc Incl. chassis 110kW 1500rpm Electric motor

Condition: good (used), Year of construction: 2014, Pellet Press Manufacturer - TEKNO UNO Model - TK 304 Year - 2014 Motor Power - 50 kw Capacity - 450 kg/h Njdpfxovdrtxj Akmsdc

Condition: new, Year of construction: 2026, We offer: Nedpfxjlt Ugts Akmjdc Pellet machines from the WALW-Solutions brand, characterized by unique quality, honest workmanship, and a fair price. Honest Workmanship: We produce our systems directly in Poland. Only components such as gearboxes and motors are purchased from reputable manufacturers. Everything else is designed and built in-house, which allows us to meet every requirement. Fair Price: We produce in Poland, and we stand by that. Other competitors, who advertise their products as "Made in Germany," only assemble them in Germany and typically source components from Lithuania. We enable you to benefit from our low production costs, resulting in our offer price being typically 40% lower than that of our competitors. These machines for pellet production are entirely new to the market in this price/performance segment and are unique in Europe! Machines from WALW-Solutions are available exclusively through us! From systems for processing in-house sawdust from firewood production or from your carpentry shop, to the professional production of pellets on an industrial scale from wood chips, straw, miscanthus, and more – and also for the production of hay or straw bales, we can provide you with the right solution! Our systems have a capacity of 150 kg/hour up to 5 tons/hour and include all the necessary components to implement a fully automated system. For all raw materials, we find the appropriate solution or methods to integrate automation into existing systems. All machines and controls are equipped with components from Siemens, ABB, Schneider Electric, etc. Please note that net purchase is possible if you have a valid VAT ID! We look forward to your inquiry! If you are interested, please contact me directly by mobile at:

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 1,00,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment) Nsdpfsi Akrksx Akmodc