Ernwein Sarl

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, HM circular saw blade for aluminum and plastics, 420 x 3.2 x 40 mm, 108 teeth, negative tooth angle Hydraulic feed brake Iodpfx Aezu Azdocfoif Pneumatic material clamping system, on both sides from above Pneumatic saw blade spray system Pneumatic maintenance unit, consisting of a water separator, pressure reducing valve with pressure gauge, and oiler Crosscut fence for cutting angled pieces Machine stand

Year of construction: 2009, condition: used, Max. saw blade diameter: 500 mm Max. feed length: single 650 mm (3-stage feed possible) Iedpjzuzmfofx Acfsif Pneumatic material feed Pneumatic Sawing Feed Minimum quantity spray device Piece counter with shut-off automatic Digital display of conveyance length Cutting height quickly adjustable via 4-position selector switch Includes chip suction 800 kg

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2450099150, 1 No 2019 Elumatec MGS245/00+AMS Upstroke saw with 6.7m infeed roller bed, with 7.6m outfeed roller bed – however, calibrated cutting unit to 6.8m Saw fitted with calibrated automatic measuring system for accurate cutting This machine can cut straight cuts, mitres up to 55 degrees and compound mitres. Straight cut maximum in table below. Max Width of material cutting 455mm Isdpfx Aezupzqjcfjif BUYER TO ARRANGE COLLECTION OF SAW WE CAN ASSIST WITH LOADING ONTO SUITABLE VEHICLE

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 3093-002, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, BJM FTB-100K – Automatic PVC Profile Cutting Center For sale: BJM FTB-100K automatic profile cutting center, designed exclusively for cutting PVC profiles. The machine does not have a milling function. The machine was previously used for cutting Kömmerling 70, 76 MD and 88 MD PVC profiles. The machine is currently packed and stored. It was taken out of production because a new machining center with milling capabilities was purchased. Technical specifications Manufacturer: BJM Model: FTB-100K Year of manufacture: 2003 Machine No.: 3093-002 Power supply: 400 V, 3-phase Saw blade diameter: 500 mm Maximum profile width: 120 mm Iiedpfx Aoztv Nfecfsf Maximum profile height: approx. 140 mm Cutting angles: 45°, 90° and 135° Number of saws: 3 Maximum profile length: 6,500 mm Minimum finished part length: 280 mm Input: XML cutting list files Labelling: Automatic label printing is available The machine is suitable for automated cutting of PVC window and door profiles and can process cutting lists supplied as XML files. The machine is sold as a used machine and is currently stored in packed condition.

Year of construction: 2026, condition: new, functionality: fully functional, Standard configuration: ▪   No. 2 carbide tungsten saw blades Ø 600 mm ▪   Integral safety casing for cutting area protection ▪   No. 4 vertical vices ▪   2 Retractable pneumatic intermediate supports ▪   Loading roller conveyor 400 (Useful length 2,2 m) on mobile head Iiodpfx Aceztr Rrjfjf ▪   Minimum quantity lubrication (MQL) with pure oil ▪   Greasing gun ▪   Set up for the extraction of chips and fumes ▪   15' touch screen control panel (IP65) on linear guides ▪   PC operator interface ▪   Operating system Windows ® ▪   Real time numerical control ▪   FSTCUT4 software licence ▪   Software management of cutting in minimum and super-minimum mode for special lengths ▪   Software management of cutting in oversize mode for special lengths ▪   Software management of cutting in trimming mode for cut ends with variable angles ▪   Teleservice for the first 12 months Optional equipment installed on the machine: ▪ PR-29060 Profile lifting kit ▪ PR208207 Third intermediate pneumatic retractable support ▪ PR206695 Chip conveyor belt ▪ PR203359 Label printer ▪ PR203356 Licence for step-by-step cutting software, complete with 1 extra surface on fixed head, horizontal clamps on fixed and mobile head (no. 2), 90° cuts, two-hand control ▪ IV33160 Vacuum cleaner for extraction of chips and fumes

Condition: good (used), Year of construction: 1999, functionality: fully functional, cutting length (max.): 6,250 mm, feed length X-axis: 6,250 mm, saw blade diameter: 500 mm, total length: 7,000 mm, total width: 1,100 mm, saw blade speed: 2,820 rpm, input voltage: 400 V, overall weight: 1,910 kg, For sale is an Emmegi Twin Electra Sun double miter saw in good, functional condition. The machine is ideal for the precise processing of aluminum, plastic, and similar profiles. Thanks to the programmable control system and numerous stored programs, it is well-suited for both individual custom pieces and series production. Technical data: * Manufacturer: Emmegi * Model: Twin Electra Sun * Year of manufacture: 1999 * Cutting length range: 350 to 6,250 mm Iijdpsztkbvefx Acfsf * Double miter saw with automatic positioning * Various programs can be stored or are already available * Suitable for precise 90° and miter cuts The machine is in a ready-to-use condition and can be inspected and tested by appointment. Price: Negotiable

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, power: 4.4 kW (5.98 HP), cutting height (max.): 6,000 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 90 °, rotational speed (max.): 2,800 rpm, On sale Pertici saw that is no more required. wo headed automatic saw for cutting aluminium profiles. Saw blade diameter: 500 mm Max cutting lenght: 6000mm Min cutting lenght: cca 330 mm Iiodpfx Asztc Dcecfof Engine power: two three-phase motors, each one 2,2 kW (summary4,4 kW), 2800 rpm Head tilt: 90-45° Year of production : 2016 Price: 9300€ The machine can be seen in Rugvica, Croatia (nearby Zagreb).

Condition: new, CNC double-head mitre saw equipped with Ø 600 mm saw blades, designed for precise and automated cutting of profiles. The machine features a robust electro-welded steel base and consists of one fixed cutting unit and one mobile cutting unit with electronic positioning along the X-axis. Both cutting heads are equipped with controlled rotary axes (RF and RM), allowing automatic positioning of the cutting units at angles ranging from 45° inward to 20° outward. The saw blades are operated by hydro-pneumatic cylinders, with adjustable feed speed and rapid return. Main features: CNC double-head mitre saw Ø 600 mm saw blades One fixed and one mobile cutting unit Electronic positioning of the mobile unit – X-axis Controlled rotation of both cutting heads – RF and RM axes Cutting angle range: 45° inward to 20° outward Hydro-pneumatic blade feed Iisdpfoztb Hpex Acfef Adjustable blade feed speed Rapid blade return Horizontal clamping system with double cylinders Vertical profile clamping system Pneumatically operated safety guards for the cutting areas 15” touch-screen monitor Windows 10 platform Programming and management of cutting operations via touch-screen interface Provision for an industrial label printer for workpiece identification and association with the corresponding production order The machine is designed to provide precision, productivity and ease of operation, and can be easily integrated into the production process.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Electronic control of the X-axis X-axis positioning speed (m/min) 25 Detection of the moving head position using a direct measurement system with an absolute magnetic strip Mechanical adjustment of intermediate angles; maximum external inclination 22°30' Isdpfx Acszr E S Tofjif Oil-pneumatic blade feed Useful cutting length (mm) 4,000 Blade diameter (mm) 550 Blade motor power (kW) 2.2

Condition: used, Year of construction: 2017, For processing aluminum and PVC profiles: * Miter cuts possible in 3 planes, also usable as a crosscut saw. * Manual adjustment of the horizontal saw blade, allowing it to be positioned up to 20 mm in front of the vertical blade. * Notching options: right-angled, single-sided bevel, double-sided bevel, triple-sided bevel. * Processing of profiles up to 300 mm wide at 90°, sharp miter cuts up to 30°, profile height 280 mm. * Notching depth: horizontal up to 185 mm, vertical up to 210 mm at 90°. * Notching width at 90°: 300 mm. Iiedpfxjzrk Rbe Acfof * Max. profile height 280 mm. * Swivel range of the saw blade vertically from 30° - 90° - 30° (front/center/rear) manually, positioning via a mechanical digital display. * Swivel range of the saw blade horizontally with the vertical saw blade 30° - 90° - 30°, manually, positioning via a mechanical digital display. * Material stop (tabletop) can be swivelled manually to the left and right from 30° - 90° - 30°, positioning via a scale. * Material depth stop is manually adjustable with a sliding carriage and hand clamp, positioning via a mechanical digital display.

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 124169101-03-EN-EP124, Equipment: 3rd hydraulic function, It was used for pressing corners. Iisdezrhvujpfx Acfjf

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 242724, Automatic miter cutting Isdpfx Acozqu Egsfoif Overlength cutting Saw blades 500mm etc.

Year of construction: 2013, condition: used, Max. sawing length: 6,000 mm Max. saw blade diameter: 550 mm Windows-based control E 555 with touch display Iiodpfxszqbp Es Acfjf Swivel inside and outside 22.5° - 90° - 140° Tilt angles between 45 and 90 degrees Digital angle displays Moving roller conveyor Chip suction on both units Minimum quantity spray device label printers Machine is loaded free

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 9346, Machine in good condition Vertical saw blade diameter: 600mm Horizontal saw blade diameter: 500mm Notching width: at 90 degrees, processing of profiles up to 300mm Miter cuts up to 30 degrees Iijdezp Rnnopfx Acfjf Maximum profile height: 280mm Notching depth: at 90 degrees, horizontally up to 185mm Material stop can be swiveled to 30 degrees, 90 degrees, 45 degrees Motorized adjustment of the angle with digital display

Year of construction: 2003, condition: reconditioned (used), functionality: fully functional, IDRACAM Software X-axis, travel: 3550 mm Y-axis, travel: 1100 mm Iiodpfxezpv A Re Acfef Z-axis, travel: 425 mm Electro-spindle rotation: 0°/90°/180° Working capacity: X-axis = 3500 mm Y-axis = 540 mm with electro-spindle in the vertical position at 90° Y-axis = 460 mm with electro-spindle in the horizontal position at 0° or 180° Z-axis = 300 mm with electro-spindle in the vertical position at 90° Z-axis = 250 mm with electro-spindle in the horizontal position at 0° or 180° Spindle: ISO 30 - power: 4 kW Rotation speed: 12000 rpm Tool magazine Used machine, CE compliant

Condition: used, Year of construction: 2017, functionality: fully functional, Graule ZS 170 Iodpfx Acjzm R U Nofoif - digital length stop - digital angle display - roller conveyor - dust extraction

Condition: used, Year of construction: 2023, Graule ZS 135 Isdpozm Rr Isfx Acfoif - Digital length stop - Digital angle display - Roller conveyor

Year of construction: 2011, condition: reconditioned (used), functionality: fully functional, HSS discs, Ø 350 mm – thickness 2.5 mm – number of teeth 280 – tooth pitch 4 mm. Three-phase motors with 2 speeds, 2.2/1.4 kW – 1440/720 rpm – 230/400V – 50 Hz Direct motor-to-disc drive Disc arbor, Ø 32 mm Blade rotation at 4 different speeds (15 – 30 – 45 – 90 rpm) Iiedpfx Aozl Ub Decfof Pneumatically rotating worktable from 90° to 45° inwards Head with vertical sliding movement on a linear guide First head, fixed Second head, mobile: automatic positioning with manual override option Positioning speed (automatic) of the mobile head: 20 m/min Positioning accuracy of the mobile head: +/- 0.1 mm Roller conveyor for the mobile head (3 m) Minimum cutting length between the two heads: 480 mm Maximum cutting length between the two heads: 5000 mm Manual kit for undercutting Oleopneumatic disc feed (adjustable feed speed – rapid approach and retraction)

Year of construction: 2007, condition: used, Vertical CNC Machining Centre designed for the machining of aluminium, PVC, steel, and light alloy profiles, ideal for the production of windows, doors, curtain walls, and light metal structures. Iedpfx Acszlpnlofjif Technical Specifications: 4 controlled axes Working table: 4,000 mm X-axis travel: 4,270 mm Y-axis travel: 1,040 mm Z-axis travel: 430 mm A-axis rotation: from -15° to +195° FOM electrospindle: 4 kW Spindle speed: 12,000 rpm Tool holder: ISO 30 Tool magazine: 4-position ISO 30 4 pneumatic clamps with automatic positioning Retractable left pneumatic stop Right pneumatic profile positioning stop Minimum quantity lubrication (MQL) system with pure oil Machine weight: 2,500 kg Applications Ideal for the machining and production of: Aluminium windows and doors Doors and windows Curtain walls Industrial aluminium profiles Aluminium and light alloy fabrication

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: 9588, Reconditioned Production Ready！ Ref Code:1027 Prisma 600 Saw blade diameter vertical: 600 mm Ijdpjzlaucofx Acfjif Saw blade diameter horizontal: 500 mm Notching width: at 90° processing of profiles up to 300 mm, pointed mitres up to 30° Profile height max. 280 mm Notching depth: at 90° horizontally up to 185 mm / at 90° vertically up to 230 mm Material stop: swivel 30° - 90° - 45° Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cutting length (max.): 4,500 mm, saw blade diameter: 550 mm, Double mitre saw Elumatec DG 142/01 Cutting length min 300, max 4500 mm Max. saw blade diameter 500 mm Pneumatic angle adjustment 45-90 degrees Ijdszi Uxdspfx Acfoif Digital angle display Automatic length positioning Moving roller conveyor Pneumatically foldable support arms Label printer

Condition: used, Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual positioning of the saw assembly with digital length display Cutting area at 90°: 195 x 120 mm Isdpszi A Uasfx Acfoif Cutting area at 45°: 135 x 120 mm Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides 2-Hand-Bedienung

Year of construction: 2001, condition: used, Automatic feed via Elgo control 255 Isdpjzh Itfofx Acfjif For attachment to any Elumatec single-head saw (right) Max. push length: 3000 mm

Condition: new, Year of construction: 2026, functionality: fully functional, saw blade diameter: 520 mm, CNC-controlled double-head mitre circular saw with electronic saw head tilting A high-performance circular saw designed for precise and efficient cutting of profiles made from aluminium, non-ferrous metals, and various plastics. Ijdpfxozhkaze Acfoif The machine can be used for individual cuts—sawing the profile simultaneously with two saw heads—or in automatic mode, where the double-head saw operates as a single-head saw automation system. Electronic mitre adjustment of the saw heads. Mitre angles are infinitely programmable between 20° and 135°. Saw blade drive power: 2 x 2.2 kW Saw blade diameter: Ø 520 mm Maximum cut length with both saw heads operating simultaneously: 4,000 mm or 5,000 mm Maximum / minimum cut length in automatic mode: unlimited (the profile is pushed and pulled) Roller conveyor travel length: 2,300 mm Maximum space requirement: approx. 7.2/8.2 m (saw unit fully to the right) x 1.25 m x H 1.6 m Weight: approx. 1,500 kg / 1,700 kg - CNC control with a touchscreen and color graphics on a mobile operator’s panel - Import and export of CSV / LTE files (for loading cutting lists from external design software) - Graphical profile display Optionally equipped with a label printer.

Condition: reconditioned (used), functionality: fully functional, Effective cutting length: 4000 mm Iiedpfx Acozgh Umofsf Blade diameter: 450 mm Pneumatic tilting of the cutting heads Tilting angle: 90-45°