Makinate

Condition: excellent (used), Year of construction: 2013, 2013 Huvema HU 460 x 1500 VAC Gap Bed Centre Lathe With Newall DP700 DRO Swing Over Bed Ø460mm. Swing Over Cross Slide Ø270mm. Swing In Gap Ø690mm. Distance Between Centres 1,500mm. Centre Height 230mm. Spindle Through Bore Ø80mm. Variable Speed Override (Digital Read Out) Speed Range 30-2,000rpm (Motor 7.5kW). Spindle Nose D1-8/CAMLOCK. Main Spindle Taper MT6. Cross Travel 285mm. Top Slide Travel 128mm. Longitudinal Feed 0.031-1.7mm/rev, Cross Feed Range 0.014-0.784mm/rev. Width Of Bed 300mm. Tailstock Quill Travel 130mm, Tailstock Taper MT4, Tailstock Quill 60mm. Threading Metric 0.1-14mm. Threading Inch 2-112tpi. QTC. Voltage 400V. S/No. 30617 1781 (2013). NOTE: Machine must be collected no later than 17 April 2026. The machine is decommissioned and can be loaded to a flatbed FOC. Lhedpoywzndofx Abced With Coolant System, Leadscrew Cover, (1) Ø250mm 4 Jaw Chuck, (1) Ø200mm 3 Jaw Chuck, Backing Plate, 3 Point Steady, Travelling Steady, Work Light, Spindle Guard. Machine Dimensions L2,750 x W1,080 x 1,370mm. Weight 2,020kg.

Condition: excellent (used), Year of construction: 2013, Mori Seiki NLX2500Y/ 700 Year: 2013 Control M730BM Mapps IV Capacity Swing over bed mm 920, with front cover 589 mm Swing over cross slide 742 mm Max. turning diameter 278 mm Standard turning diameter 192 mm Max. turning length 705 mm Bar work capacity 80 mm Through-spindle hole diameter 90 mm Travel X-axis 260 mm Y-axis ±50 mm Z-axis 795 mm Tailstocktravel (B-axis) 734 mm Max. spindle speed 4,000 rpm Spindle nose JIS A2-88 Through-spindle hole diameter 91 mm Spindle bearing inner diameter 140 mm Min. spindle indexing increment 0.001° Turret Number of tool stations 20 positions Shank height for square tool 20 mm Shank diameter for boring bar 32 mm Turret indexing time sec. 0.27 Max. rotary tool spindle speed 10,000 rpm Feedrate Rapid traverse rate X, Z: 30,000 mm/min Y: 10,000 mm/min Tailstock: 20,000 mm/min Tailstock: Tailstock travel 734 mm Taper hole of tailstock spindle Live center: MT5 Motor for Spindle 4,000 min-1 kW (HP) 18.5/24.7 (25%ED/50%ED/cont) Rotary tool spindle drive motor 10,000 min-1 kW (HP) 5.5/5.5/3.7 (3 min./5 min./cont) Feed motor X, Y, Z: 3 kW Tailstock: 2 kW Power sources (Standard) Electrical power supply (cont) 33.5 kVA Tank capacity Coolant tank capacity 367 Liter Machine size Machine height 2187 mm Floor space (width × depth) (Including a chip conveyor) 3994×2080 mm Mass of machine 6200 kg Accessories/options: - high pressure paper band filter type, micro filtered, coolant tank - swarf conveor - static holders - 1 driven holder - collet type chuck 3 pieces, different sizes - Kitagawa 3-jaw hydraulic chuck diameter 210 mm - Full set of documentations - Parts catcher Lodoywyncspfx Abcjhd Under power in our warehouse. Video available upon request!

Condition: used, Year of construction: 2008, 2-axis CNC lathe MAZAK QTN 100II Mazatrol Matrix Kitagawa BB206 chuck Spindle bore 51mm Turning length 310mm Turning diameter 280mm X-190mm Z-330mm Max spindle speed 6000 rpm 12-position turret Tool probe Tailstock Lhjdpfx Ajyvzwvobcod Included with the machine: -coolant tank with pump -documentation

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: M232302, turning length: 435 mm, turning diameter: 250 mm, spindle bore: 63 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 480 mm, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,200 mm, total length: 8,000 mm, total width: 2,400 mm, overall weight: 5,000 kg, bar passage: 52 mm, spindle nose: A2-5, controller manufacturer: FANUC, controller model: SERIES 18i-T, Equipment: chip conveyor, rotational speed infinitely variable, NAKAMURA TOME WT-250 CNC Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 225 A - Connection: 62 kVA - Swing diameter over bed: 250 mm Lhedpfx Abjyvrthecjd - Swing diameter over carriage: 250 mm - Standard turning diameter: 100 mm - Max. bar capacity: 51 mm - Chuck size: 6 inch - Front spindle bearing diameter: 90 mm - Tailstock travel: 620 mm - Tailstock rapid traverse: 24 m/min - Ball screw diameter: 32 mm - Ball screw pitch: diameter 12 mm - Distance between spindle noses: min. 250 mm, max. 870 mm - Positioning accuracy of feed axes: 0.05 mm The machine is equipped with a sub-spindle, HAINBUCH clamping system, a main spindle with HAINBUCH clamping system, a twin turret with the tool holders as shown on the turret, as well as a bar feeder from KUPA, model LM92P, along with chip conveyor and transformer. Attention: The item must be collected between 12.05. and 22.05.2026, with the exact date to be agreed upon. FCA D-74821 Mosbach – loaded onto truck

Condition: excellent (used), Year of construction: 2022, As-new condition; has not yet been used in production Control: CNC path control SIEMENS SINUMERIK 828 D TECHNICAL DATA Lsdpeyrd Uhofx Abcohd Main spindle Turning diameter 288 mm Turning length 243 mm Chuck diameter 210 mm Bar capacity 67 mm Max. drive power 10.5/20.0 kW Max. torque 214 Nm C-axis (resolution) 0.001° Speed range up to 4,500 rpm Turret (tool carrier) Number of stations 12 of which driven 12 Speed of driven tools 5,000 rpm Tool interface BMT 45 X-axis 175 mm Z-axis 350 mm Tailstock Quill diameter 65 mm Quill stroke 80 mm EQUIPMENT/ACCESSORIES • Hollow clamping cylinder, main spindle • C-axis, main spindle • Tailstock • Driven tool system, turret • Coolant system • Chip conveyor • Rinsing gun • Parts catcher • Three-jaw chuck, dia. 206 mm • Documentation

Condition: used, Year of construction: 2001, turning diameter 290 mm turning length 850 mm swing diameter 600 mm control Siemens type 840 D mm spindle passage 103 mm turning speeds 3000 U/min live tooling 3000 U/min rapid travel - grinding spindle 25 m/min total power requirement 65 kW weight of the machine ca. 11 t Serial No. 1130.2011-30 Equipment: Main spindle / counter spindle 2 power chucks 2 tool turrets C-axis Cabin Chip conveyor Coolant system 22 bar Offer price without tools Optional accessories available for purchase: 106 tool holders for internal and external machining, 20 driven tools (including 10 angle tools) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Ljdpeyqv Aujfx Abcohd Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2003, Siemens 840D control system Turning diameter 254 mm Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Lhedpfxjyp Idus Abced Spindle speed 4,500 rpm 8-position turret Chip conveyor

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 555 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 82 mm, travel distance Z-axis: 600 mm, workpiece diameter (max.): 250 mm, TECHNICAL DETAILS Counter-spindle speed: 59–4,500 rpm Bar capacity main spindle: 65 mm Bar capacity counter-spindle: 51 mm Travel X1/X2 axis: 195 mm Travel Y axis: ± 41 mm Travel Z axis: 600 mm Max. workpiece diameter: 250 mm Max. turning length: 555 mm Number of tool stations upper turret: 12 Number of tool stations lower turret: 12 All tools driven Main spindle nose: A 2-6 Counter-spindle nose: A 2-5 Feed power X1/X2/Y axis: 1 kW Lsdpfoynhihox Abcehd Feed power Z1/Z2 axis: 2.1 kW Maximum loading length: 6,200 mm MACHINE DETAILS Control model: Fanuc 18 IT Main spindle power: 18.5 kW / 15 kW Counter-spindle power: 11 kW / 7.5 kW Bar feeder Max. bar length: 6 m 8 channels with diameters: 22 mm, 27 mm, 32 mm, 37 mm, 42 mm, 47 mm, 57 mm, 67 mm 8 pushers with pusher cone Intermediate sizes can also be loaded Unload magazine Max. bar length: 2 m EQUIPMENT Coolant tank Chip conveyor from 10/2021 Last overhaul of bar feeder 09/2020 (channel replacement, replacement of various bearings, replacement of push rods and spindle liners, including maintenance)

Condition: ready for operation (used), operating hours: 7,738 h, functionality: fully functional, turning length: 225 mm, turning diameter: 260 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 170 mm, travel distance Z-axis: 335 mm, TECHNICAL DETAILS Max. turning diameter: 260 mm Max. turning length: 225 mm Chuck size: 6" Swing diameter over bed: 550 mm Travel X-axis: 170 mm Travel Z-axis: 335 mm Rapid traverse X/Z-axis: 36 m/min Main Spindle Spindle nose (ASA): A2-5 Max. spindle speed: 6,000 rpm Spindle bore diameter: 56 mm Max. bar capacity: 45 mm Turret Number of turret stations: 12 positions Turret indexing time: 0.15 s Tailstock Quill diameter: 60 mm Quill stroke: 80 mm Taper/Quill mount: MT 4 Live Tooling Spindle Max. spindle speed: 5,000 rpm Bar Feeder Model: Fedek Machine Co. DH-65 Bar length min./max.: 280/1,200 mm Bar diameter: 5-65 mm MACHINE DETAILS CNC control model: Fanuc 0i-TD Control on-time: 30,811 h Lhsdpfjyngptox Abcod Cutting time: 7,738 h Spindle motor power: 15/7.5 kW Feed motor power X/Z-axis: 3.0/1.8 kW Live tooling spindle motor power: 3.7/2.2 kW Dimensions Dimensions (L x W x H): approx. 1,620 × 1,200 x 1,400 mm EQUIPMENT Side-mounted chip conveyor and chip cart Short bar loader magazine Interface for bar feeder Workpiece catcher (parts catcher) Chuck open/close confirmation switch C-axis indexing Driven tools Trailing (drag-along) tailstock Linear guides Manuals

Condition: used, Year of construction: 2008, turning diameter 250 mm turning length 400 mm control Siemens 840 D swing diameter max. 300 mm workpiece length - max. 400 mm Lhedeynbchopfx Abcod travel -x axis 280 mm feed in x - axis - 30 m/min rapid traverse X-axis 30 m/min travel -z axis 1150 mm feed range Z-direction mm/min rapid traverse Z-axis 60 m/min spindle bearing diameter 90 mm spindle head DIN 55026 - Size A6 turning speeds 1 - 5000 U/min tool turret 12 times C4 Capto total power requirement 45 kW weight of the machine ca. 11 t dimensions of the machine ca. 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control; Screw conveyor with chip breaker and return pumping station; NC-steady SMW-SLU-1-OLD Ø10-70mm; 12-fold tool turret SAUTER 0.5.460.220; NC tailstock; Artis monitoring; Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power.

Condition: used, Year of construction: 2008, turning diameter 250 mm turning length 400 mm control Siemens 840 D swing diameter max. 300 mm workpiece length - max. 400 mm travel -x axis 280 mm feed in x - axis - 30 m/min rapid traverse X-axis 30 m/min travel -z axis 1150 mm feed range Z-direction mm/min rapid traverse Z-axis 60 m/min spindle bearing diameter 90 mm spindle head DIN 55026 - Size A6 turning speeds 1 - 5000 U/min tool taper Capto C4 total power requirement 45 kW weight of the machine ca. 11 t dimensions of the machine ca. 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control; Screw conveyor with chip breaker and return pumping station; NC-steady SMW-SLU-1-OLD Ø10-70mm; Lhedpfxoynbcbe Abcsd 12-fold tool turret SAUTER 0.5.460.220; NC tailstock; Artis monitoring; Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power.

Condition: used, Year of construction: 2005, turning diameter 250 mm turning length 400 mm control Siemens 840 D swing diameter max. 300 mm travel -x axis 280 mm feed x-axis 0,1 - 30.000 mm/min Ledpsynbb Refx Abcshd rapid traverse X-axis 30 m/min travel -z axis 1.150 mm Feed z- axis 0,1 - 60.000 mm / min. rapid traverse Z-axis 60 m/min spindle bearing diameter 90 mm spindle head DIN 55026 - Size A6 turning speeds 1 - 5.000 U/min tool turret - number of stations 12 tool taper Capto C4 total power requirement 45 kW weight of the machine ca. 11 t dimensions of the machine ca. 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control; Screw conveyor with chip breaker and return pumping station; NC-steady SMW-SLU-1-OLD Ø10-70mm; 12-fold tool turret SAUTER 0.5.460.220; NC tailstock; Artis monitoring; Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power.

Condition: used, Year of construction: 1989, Maximum swing over bed: 400 mm, over carriage: 250 mm. | Maximum turning length: 500 mm. | Spindle speed: 75 / 4,200 rpm | Power: 11 / 7.5 kW | Spindle bore diameter: 56 mm | Approximate total weight: 4,500 kg. Ljdeyl Uqajpfx Abcjhd

Condition: used, Year of construction: 2022, DOOSAN - LYNX 2100LMB - 2022 - system FANUC - 597 working hours - very very less used machine - max turning diameter 300 mm - max turning length 510 mm - X/Z moves 205/560 mm Lsdpfoyl Sh Aox Abcohd - spindle 15 kW - spindle 4500 RPM - driven tools 6000 RPM - revolver head 12 position

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, CNC Lathe DMG MORI NLX 2000 SY/500 Lsdpfoylnq Hsx Abcshd Equipped with DMG MORI M730 UM MAPPS CELOS control system Year of manufacture: 2016 Max. workpiece diameter: 366 mm Max. workpiece length: 510 mm X-axis travel: 260 mm Z-axis travel: 590 mm Y-axis travel: ± 50 mm Spindle bore: 65 mm Main spindle speed range: 4,000 rpm Counter spindle speed range: 6,000 rpm Driven tool speed range: 10,000 rpm Including the following accessories: Working area door with interior lighting 20-position turret with 20 driven stations C axis, Y axis Touch probe (Marposs) Counter spindle, parts catcher Manual tool presetter (HS) Hydraulic collet chuck with foot pedal (HS) Hydraulic collet chuck with foot pedal (GS) Bar feeder LNS Move S2 30 tool holders Various driven tools Direct linear measuring system on X, Y, Z axes 4-color signal lamp Chip conveyor Coolant system Operating manuals

Condition: like new (used), Year of construction: 2018, functionality: fully functional, MAZAK QUICK TURN 250MY 1000U Max. turning diameter: 380 mm Max. turning length: 991 mm Max. milling speed: 5,000 rpm Lhjdsyllrnspfx Abcsd Max. spindle speed: 4,000 rpm Max. bar diameter: 80 mm Machine is equipped with: - CNC control Mazatrol SmoothG - KITAGAWA three-jaw chuck BB-210, diameter 254 mm - Tool Eye - C-axis - Y-axis - NC tailstock - Reinforced coolant pump - Chip conveyor - 8 static tool holders - 2 driven tool holders

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, turning length: 1,330 mm, turning diameter: 393 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 242 mm, travel distance Z-axis: 680 mm, quill stroke: 80 mm, turning diameter over top slide: 400 mm, spindle nose: A2-8, Doosan Puma CT250 CNC Lathe Ledpsyli R Uofx Abcohd Model: CT250 Year: 2003 Control: FANUC 21It ‘X’ axis Travel: 240mm ‘Z’ axis Travel: 680mm Chuck Dia: 10” (250mm) Swing over Bed: 570mm Swing over Saddle: 400mm Max. Turning Saddle: 255mm dia. Distance Between Centres: 700mm Spindle Speeds: 35 - 3500 RPM Machine with: Tool Pre setter Swarf Conveyor

Condition: used, Year of construction: 2011, turning diameter 250 mm turning length 510 mm control Fanuc i Series greates pass round over bed 510 mm swing diameter over slide rest 290 mm x-axis 175 mm z-axis 550 mm spindle tunring speed 6.000 U/min number of tool places 12 Pos. auto power on hours ca. 18.136 h spindle hours ca. 8.822 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Driven tools - Short bar feeder - Chip conveyor - Collets - 3-jaw chuck, hydraulic Lhsdpjylcqzofx Abced Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2011, turning diameter 250 mm turning length 510 mm control Fanuc i Series greates pass round over bed 510 mm swing diameter over slide rest 290 mm x-axis 175 mm z-axis 550 mm spindle tunring speed 6.000 U/min number of tool places 12 Pos. auto power on hours ca. 11.197 h spindle hours ca. 5.359 h Ledpfx Asylcqujbcshd In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Driven tools - Short bar feeder - Chip conveyor - Collets - 3-jaw chuck, hydraulic Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2014, Hardinge GS200 CNC Lathe 2010 Hardinge GS200 CNC slant bed lathe equipped with Fanuc Series Oi-TD control. ----- Control Fanuc Series Oi-TD CNC Control ----- Capacity Chuck Size: 3 Jaw Bar Capacity: 52mm Maximum Swing: 457mm Maximum Cutting Diameter: 284mm Maximum Cutting Length: 406mm Distance Between Centres: Not specified ----- Main Spindle Maximum Spindle Speed: 5,000 RPM ----- Turret Number of Stations: 12 ----- Axis Travels X Axis Travel: 218mm Lhjdpfx Asylchtebcod Z Axis Travel: 406mm ----- Accessories Hydrafeed Multifeed 65 Barfeed Swarf Conveyor Control: Fanuc Spec: Spindle bore 52 mm | Max Swing 457 mm | Travel X 218 Z 406 mm Accessories: Tailstock, parts catcher & 8" Power Chuck, Swarf conveyor, Collet chuck

Condition: not inspected (used), operating hours: 47,019 h, functionality: unexamined, machine/vehicle number: 320678, turning diameter over cross slide: 185 mm, turning diameter: 280 mm, spindle bore: 50 mm, chuck outer diameter: 110 mm, controller model: ELTROPILOT EPL 2, number of slots in tool magazine: 16, No reserve price – guaranteed sale to the highest bidder! Bidding obliges the buyer to collect the item on time between 08.04.26 and 16.04.26. TECHNICAL DETAILS Spindle bore: 50 mm Chuck diameter: 110 mm Turning diameter over bed: 280 mm Turning diameter over cross slide: 185 mm Centre height: 240 mm Bed width: 250 mm Number of turret stations: 16 MACHINE DETAILS Lhjdpfxjyk Eq Uo Abcod Control: ELTROPILOT EPL 2 Operating voltage: 380 V Frequency: 50 Hz Rated current: 50 A Connection: 18 kVA Dimensions & weight L x W x H: 3000 x 1700 x 1800 mm Machine weight: 1,500 kg EQUIPMENT Chip conveyor External reference: 5

Condition: excellent (used), Year of construction: 1997, 2-Axis CNC Lathe Hitachi Seiki Model: HT23R III Year of manufacture: 1997 Control: Seicos L Multi XZ: 230 x 630 mm Turning diameter: 254 mm 4,000 rpm Turret with 12 positions Tailstock, chuck, large tool holder package, measuring arm, chip conveyor, documentation Condition: In production use – Good condition Lhodpoykivzjfx Abcsd

Condition: excellent (used), ECOCA MT 312-750 CNC Lathe Lhodpfxsyka Smj Abcjd Year 2006 CNC Control Fanuc 21i-TB Swing over bed 600mm Swing over saddle 450mm Turning dia 450 over bed Spindle bore 102mm Spindle speeds 0-3200rpm Spindle power 18.5/22kw Turning length 730mm Tailstock Tool arm 12 station turret 12” 3 Jaw Chuck Swarf conveyor Filtermist extraction Tool holders

Condition: excellent (used), Year of construction: 2017, operating hours: 8,440 h, functionality: fully functional, turning diameter over cross slide: 402 mm, turning diameter: 295 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 750 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 19 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,170 mm, total length: 3,179 mm, total width: 5,310 mm, type of input current: three-phase, overall weight: 5,000 kg, operating hours of spindle: 1,038 h, We are offering a lightly used HURCO TMM 10i for sale. Main spindle operating hours: 1,038h The machine can be inspected at any time, as it is currently still in operation. Additional display included Integrated oil mist extraction system Includes a comprehensive range of accessories worth approx. €25,000 (net), including tools, tool holders, fixtures, storage cabinet, workshop trolley, and chip cart. An itemized list is available. Lhjdpfxsyi Uf Eo Abcod There is the possibility for the buyer to manufacture and supply parts for the seller in the future. The corresponding programs for the machine are available.

Condition: good (used), CNC Lathe TAKAMAZ EX 20 / Fanuc 15 TF - Control: FANUC 15 TF - Max. turning diameter: 260 mm - Turning length: approx. 500 mm - Bar capacity: 42 mm - Spindle speeds: 40 - 4000 rpm - Spindle nose: A2-6 - Tool positions (stations): 12-fold / direct mount Ledpeyiddnsfx Abcshd - Tool measurement (Tooleye) - Parts catcher - Tailstock - Collet chuck: 173 E - Spindle motor: 7.5 kW Dimensions (LxWxH): 2.6 x 2 x 1.8 meters / Weight: 2,800 kg Errors and omissions excepted.