LICO Stahl- und Kunststofftechnik GmbH

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm piston stroke: 250 mm diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm Knsdpfxexphmhe Aabsc locking cylinder: 260 mm Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t

Condition: excellent (used), Year of construction: 2006, Dimensin: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Knsdoxphmbepfx Aabsc Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Kjdpfx Ajxphl Reabsnc Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm Ksdpoxphkysfx Aabjnc daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping Force: 2450 kN Working pressure: 206 bar Heating plate dimensions: 570 x 610 mm diameter of piston: 400 mm max. stroke: 140 mm daylight: 150 / 180 mm max. mass of heating plant: 250 kg capacity of oil tank: 150 L rated capacity: 55,2 kW heating capacity: 36,6 kW engine output, vacuum motor: 3,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm machine dimensions LxWxH: 4000 x 2850 x 2600 mm The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany. Kedpfx Aexphktsabonc

Year of construction: 2013, condition: ready for operation (used), A plastic processing system consisting of a press and an injection moulding machine is available. Conversion: 2016, press type: top ram press, pressing force: 200t, injection force: 400t, table dimensions X/Y: 2100mm/1400mm, power stroke: 2000kN, power stroke distance: 2122mm, nozzle advance: 430mm-470mm, connected load: 60kW, total system weight: approx. 35000kg. Injection moulding tools: min. dimensions X/Y/Z: 1450mm/1000mm/750mm, max. dimensions X/Y/Z: 2100mm/1400mm/750mm, max. tool force tolerance: 4000kN. Press tools: min. dimensions X/Y/Z: 1000mm/1000mm/750mm, max. dimensions X/Y: 2100mm/1400mm, max. Z dimensions (press opening stroke) at tool heights 750mm/1000mm/1250mm: 1050mm/800mm/550mm, max. tool force tolerance: 2000kN. Documentation available. An on-site inspection is possible. Kedow R Dhxepfx Aabjnc

Condition: good (used), Year of construction: 1972, functionality: fully functional, 1.0 pc Vertical press for application: SMC (Sheet Molding Compound) Manufacturer: LAUFFER Model: PRKP120 Year of manufacture: 1972 Kjdpfowzaxpsx Aabsnc Pressing force: 120 tons Table: 1,200 x 1,000 mm Additionally heated table area: 800 x 800 mm Installation height: 810 mm Stroke: 790 mm Opening: 1,600 mm

Condition: excellent (used), Year of construction: 2018, Atom HS588 / 3 CE Bridge Cutting Machine Pressure 25 Tons Table dimensions: 1600mm x 500mm Hammer dimensions: 500mm x 500mm Maximum hammer stroke: 150mm Engine power 1.5kW Simple, intuitive operation using a PLC touch panel Machine like NEW, in perfect technical condition Full manufacturer's documentation for the machine Knjdpfx Ajv Skrcoabec Possibility of assistance in organizing transport Atom HS588 / 3 CE Bridge Cutting Machine Pressure 25 Tons Table dimensions: 1600mm x 500mm Hammer dimensions: 500mm x 500mm Maximum hammer stroke: 150mm Engine power 1.5kW Simple, intuitive operation using a PLC touch panel Machine like NEW, in perfect technical condition Full manufacturer's documentation for the machine Possibility of assistance in organizing transport Atom HS588/3 CE Brückenschneidemaschine Druck 25 Tonnen Tischabmessungen: 1600 mm x 500 mm Hammerabmessungen: 500 mm x 500 mm Maximaler Hammerhub: 150 mm Motorleistung 1.5 kW Einfache, intuitive Bedienung über ein SPS-Touchpanel Die Maschine ist wie NEU, in einwandfreiem technischen Zustand Vollständige Herstellerdokumentation zur Maschine Möglichkeit der Unterstützung bei der Organization des Transports

Condition: used, Year of construction: 2004, functionality: fully functional, pressing force: 40 t, installation height: 200 mm, stroke length: 200 mm, table width: 1,300 mm, table length: 1,500 mm, Technical data: Total pressure output 400 kN Total pressing area 1300 x 1500 mm Total pressing table 1300 x 1580 mm Spec. pressure at full design 2.1 daN/cm² (kp/cm²) 4 cylinders 60 mm diameter 200 mm stroke Operating pressure 350 bar Height of the pressing chamber 200 mm Loading width 1600 mm Steel plates Roller bars arranged to the right and left of the lower heating plate for moving the press package in and out. Roller bars can be raised and lowered pneumatically by the operator, can only be activated at the bottom dead center of the pressing table. Max. load 500 kg. Knsdpfovzwxuex Aaboc

Condition: new, Year of construction: 2024, functionality: fully functional, The SR 8 screw compactor from Koltex is an advanced solution designed for drying film flakes and preparing them for the extrusion process. This innovative machine effectively reduces the moisture content of the material to around 5%, significantly impacting the quality of the final recycled product. Modular construction The machine can be customized to meet the individual needs and requirements of the customer, allowing it to be used to its optimum potential in a wide variety of applications. Reliability Ksdpjuqwzwofx Aabenc The use of renowned drive components with a high degree of efficiency reduces operating costs while extending service intervals. Intelligent machine operation Touch panel with intuitive interface for easy control and monitoring of the working process. Space-saving The press is designed to be compact, saving valuable space in the workplace. Capacity (LDPE film): 1500 KG/H Auger diameter: 500 mm Engine power: 45 kW Scraping power: 7.5 kW Feed size: 760x650 Overall dimensions: 6097x1833x2729 Weight: 6800 kg

Condition: used, functionality: fully functional, Enerpac MP-1000 F 3515BL Multifluid Hand Pump. Specifications: Superior corrosion resistance Impregnated aluminum anodized pump housing with stainless steel internal pumping components Standard Nitrile seals- excellent for demineralized water, oil/water emulsions, water glycols, mineral oils, hydraulic fluids Custom EPDM seals avaliable for use with Skydrol or brake fluids Two speed pumps up to 14,500 psi pressure Externally adjustable pressure relief valve 1/4" NPTF gauge port Maximum Operating Pressure (psi) 14,500 Pressure Rating (psi) 1st Stage 500 Pressure Rating (psi) 2nd Stage 14,500 Cylinder Compatability Single-acting Maximum Flow at Rated Pressure .12 in3/stroke Oil Displacement per Stroke (in3) 1st Stage 3.2 Oil Displacement per Stroke (in3) 2nd Stage Ksdpsttmnysfx Aabonc 0.12 Maximum Handle Effort (lbs) 99 Piston Stroke (in) 1.04 Valve Operation Manual Power Source Manual Weight (lbs) 14.5 Good working condition. Please check out our other listings as well.

Condition: excellent (used), Schon 6005 B hydraulic cutting machine with returning hammer Robust German manufacture Pressing force: 70 Ton Working area: 2050mm x 850mm Max stroke: 160mm Weight: about 6500kg Machine in Perfect technical condition after full service Possibility of assistance in the organization of transport We invite you to our other auctions ! Cutting beam machine Schon 6005 B Solid German production Pressing force: 70 Tons Working area: 2050mm x 850mm Max stroke: 160mm Weight: approx. 6500 kg The machine is in perfect technical condition after full service Possibility of assistance in organizing transport Kodpforhik Eex Aabsnc We invite you to our other auctions !!! Schon 6005 B Brückenstanze Solide deutsche Produktion Presskraft: 70 Tonnen Arbeitsbereich: 2050 mm x 850 mm Maximaler Hub: 160 mm Gewicht: ca. 6500 kg Die Maschine befindet sich nach vollständiger Wartung in einem einwandfreien technischen Zustand Möglichkeit der Unterstützung bei der Organisation des Transports Wir laden Sie zu unseren anderen Auktionen ein!!!

Year of construction: 1993, condition: good (used), Vulcanizing press of the company Wickert Maschinenbau GmbH Landau Year of construction: 1993 Machine-No. 2559 pressing force: 2800 kN heating plates: 500 x 500 mm heating: electric distance between plates: 200 mm control Siemens S5 OP17 (conversion to S7 feasible) incl. sliding table, vacuum pump, vacuum chamber, storage tank Good, used condition. With CE-marking. Knsdpfxsn Sm A Ss Aabsc

Year of construction: 1990, condition: good (used), Vulcanizing press of the company Wickert Maschinenbau GmbH Landau Year of construction: 1990 Machine-No. 2559 pressing force: 2800 kN heating plates: 500 x 500 mm heating: electric distance between plates: 200 mm control Siemens S5 OP17 (conversion to S7 feasible) Kodpfx Ajn Sm Aysabsnc incl. sliding table, vacuum pump, vacuum chamber, storage tank Good, used condition. With CE-marking.

Year of construction: 2001, condition: excellent (used), This press from Collin at Plastima Used Machinery in machine storage. The machine is from 2001 and has a normal number of working hours for its age. – Brand: Collin Pilot & Lab Solutions – Model: P200P Knodpfx Aasn Smghebjc – Year built: 2001

Year of construction: 2003, condition: ready for operation (used), There are two identical presses available, max. stroke speed: 200mm/s, oil viscosity: 46cSt a 40°C, max. hydraulic/operating pressure: 25/ 210bar, weight of the half tool: 10t, pump power at 75/ 210bar: 200/ 70l/min, pump motor power: 30kW, weight: 25t. Knedpfx Ajivt R Ajabec

Year of construction: 2017, condition: used, pressure:500 t passage width:1300x800 mm stroke:600 mm weight of the machine ca.:18 t dimensions of the machine ca.:2400 x 2400 x 5500 m draw back pressure:50 t Controll:Zweihandbedienung cylinder:1 Stück motor:50 kw Oil Cooling:elektrisch Kedpfxjd E Irmo Aabonc column diameter:200 mm work height max.:700 mm Table dimensions:1900 x 800 mm table height over floor:1000 mm pestle plate:1300 x 800 mm pre-running speed:150 mm/sec work speed:5-10 mm/sec. return speed:150 mm/sec :1500 l quantity of oil:1400 l

Year of construction: 2001, condition: used, Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014. Knjdpfx Aasdwf Dboboc