Tremex

Condition: used, functionality: fully functional, power: 18.3 kW (24.88 HP), Feed height 10 cm Feed width 30 cm Codpfxoxu E Rno Aageri 2 perforated screens with 30 mm and 50 mm hole size

Condition: excellent (used), Year of construction: 1988, Diemer automatic wood shredder DIEMER shear automatic Model ASC 35-15 used Max. cutting height 150 mm Max. cutting width 350 mm Performance at 200 mm cut length approx. 6 - 7 rm/h Hydraulic unit 5.5 kW Feed drive motor 1.5 kW Hydraulic oil capacity 160 l Weight 1800 kg Cjdpfxexu Anqe Aagsri

Condition: excellent (used), Wood chipper GROSS, model GAZ 82S, used Crjdpjxur Dnjfx Aagoi

Condition: excellent (used), Year of construction: 2012, operating hours: 1,259 h, functionality: fully functional, power: 36.41 kW (49.50 HP), overall weight: 2,000 kg, Schliesing 355 TX / Wood Chipper / Shredder / Mulcher / 21 cm Ø • Manufacturer: Schliesing • Model: 355 TX • Year of manufacture: 2012 • Operating hours: 1,259 h • Power: 36.41 kW / 49.5 HP • Wood chipper • Shredder • Mulcher • Brushwood processor Crsdsxukccjpfx Aagsi • Kubota 4-cylinder engine • Feed hopper: W: 1.34 meters x H: 1.06 meters • Infeed capacity: 21 cm Ø • Cutter disc: Ø 80 cm • Cutter disc: Nominal speed 1,140 rpm • Fuel tank: Approx. 50 liters • Technical inspection (TÜV): 08/2026 • Total weight: 2,000 kg • German machine • Immediately ready for use • This offer is non-binding and subject to prior sale. - Subject to prior sale, - Errors and/or typographical mistakes excepted. - Sale based on our general terms and conditions.

Condition: excellent (used), Bargain Zeno with 18 kW drawer-type shredder, new gearbox, screw discharge, new shaft bearings Codpfext T E Dox Aagsri

Condition: like new (used), Year of construction: 2021, As-new Vecoplan VTH 250x650 HxB shredder Power: 75 kW Credpfxextif Ho Aagei Cassel metal detector Approx. 40 linear meters of vibratory troughs

Condition: used, Year of construction: 2006, Bruks drum chipper Credpfx Aaexr Trnegji Model 820CM Year of manufacture: 2006

Condition: good (used), Year of construction: 1993, Vecoplan drum chipper VTH 75 / 22 / 5. Infeed dimensions: width 750 mm, height 220 mm. Motor: 75 kW. Crsdsxr Tp Hspfx Aagoi

Condition: good (used), Year of construction: 2008, Slow-running machine with walking floor. Rotor width 63 cm with 17 knives. 18.5 kW motor. Only 2500 operating hours. Credoxryf Ispfx Aagji

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 18.5 kW (25.15 HP), Feed opening: 600 x 800 mm Hopper capacity: 0.6 m3 Rotor diameter: 252 mm Credsxru Hyjpfx Aagei Rotor working width: 600 mm Rotor speed: 60 – 100 rpm Cutting system: 28 blades, 30 x 30 mm Screen perforation: 15/20 mm or as required Control: electronic via PLC Control cabinet: fully wired, incl. 5 m cable Motor power: 18.5 kW Connection rating: 400 V +/- 5% / 50 Hz Extraction nozzle diameter: 160 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Including: - Automatic star-delta start - Automatic shut-off in idle mode - Vibration-damping machine feet - CE-compliant - GS mark “dust-tested”

Condition: excellent (used), functionality: fully functional, power: 37 kW (50.31 HP), color: green, shaft length: 600 mm, Pre-shredder, chopper, shredder Cjdpfxjxruv Us Aagsri Manufactured by Piranha for wood and plastic Motor 37 kW Shaft length 600 mm with 3 x 5 cutting blades with 35 mm screen with control unit

Condition: used, Year of construction: 2005, SHREDDER KOMPTECH TERMINATOR 5000 E 200kW electric including control cabinet fully overhauled Credpfexrl N Ejx Aagji new couling unit READY FOR DISPATCH

Condition: good (used), functionality: fully functional, SHREDDER Type Hammel 850 E 2 x 110 kW with outlet conveyor and magnet Crodpfxjxrl Nxo Aagji

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW very good condition with 3 sets of rotor and stator knives with 2 sets of screens, 5 and 8 mm Crjdpfexrl Nrjx Aagsi AVAILABLE AND READY TO WORK

Condition: good (used), Year of construction: 2006, functionality: fully functional, Heinola chipper TT-75 RS year 2006 Cjdpfx Aaexrcgzegsri infeeding with vibra conveyor 6 m long 600 mm width + 1 year old magnetic.

Condition: used, JENZ chipper-shredder for sawmill offcuts, Crodpexqzzusfx Aagsi German-made, vibrating trough length 4m, width 0.7m, shaft width 800mm, infeed height 180mm, number of knives: 16, engine 55KW, upper toothed feed rollers 2.2KW, lower feed rollers 3KW, fan included as shown in the pictures, The chipper has clocked 1890 operating hours.

Condition: used, Wood chipper Bruks 803 CS After complete renovation Manufacturer: Bruks Model: 803 CS Length 2.90m Width 1.15m Height 1.15m Motor 50kw Chips capacity m'/h - chipper only 30-60 - in chipper package 20-40 Drum diameter, mm 800 Cjdpexqzm Rofx Aagjri Number of knives, standard 4 Inlet opening BXH, mm 540X400 Net weight, kg 2500 Rotor speed, rpm 620 Swivel mass GD', kpm' 400 Fan power, kW 11

Condition: used, Year of construction: 2025, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Cedpfx Aasxqtwzjgori Storage location: Supplier

Condition: good (used), Year of construction: 2006, Slow-speed machine with large rotor, 40 knives on rotor. Rotor width: 800 mm. Rotor diameter: 368 mm. Motor: 22 kW. The following parts have been renewed: rotor bearings, all bearings in the gearbox, new screen with 25 / 20 perforation, knives, V-belts. Crodpfjxqq A Iex Aagji

Condition: excellent (used), CATALOGUE NO. 7794 TECHNICAL DATA - inlet width: 530mm - inlet height: 200mm - shaft diameter: 370mm - shaft width: 510mm - knife length: 510mm - number of knives: 2 pcs Crsdjxqmrropfx Aagoi - auto-reverse – adjustable - screen dimensions: 50x50mm - lower toothed feed roller: 1.5kW - upper toothed feed roller: 1.5kW - main motor power: 30kW - vibrating infeed table / vibrating length: 3900mm - vibrating width: 500mm 1.5kW - discharge conveyor length: 5000mm - belt width: 380mm - waste chute hopper: 2500x3020x2200mm - platform: 4650x750x1770mm - machine dimensions with conveyor and vibrating table (L/W/H): 8900x1200x2550mm - weight: approx. 6000kg ADVANTAGES – adjustable auto-reverse – includes 3900mm vibrating table – includes 5000mm conveyor – German-made – very good condition – used industrial wood chipper Net price: 98,900 PLN Net price: 23,550 EUR (according to 4.2 EUR exchange rate) (Prices subject to change with significant fluctuations)

Condition: excellent (used), Year of construction: 2018, operating hours: 4,351 h, functionality: fully functional, machine/vehicle number: W09812219J2D38029, first registration: 10/2025, overall weight: 19,000 kg, color: orange, axle configuration: 2 axles, operation weight: 18,760 kg, empty load weight: 18,760 kg, tire size: 600/50 R22.5 166F, next inspection (TÜV): 01/2026, maximum speed: 80 km/h, drive type: Zapfwelle, number of previous owners: 1, load hours: 4,351 h, crane manufacturer: Palfinger, Equipment: ABS, additional headlights, chaff cutter, compressed air brake, crane, front power take-off, lighting, power take-off driven, trailer coupling, Fully developed hydraulic counter-cutter, developed together with Doppstadt on the vehicle and fully operational! Credsxqgm Njpfx Aagji Spare parts supply is ensured by Doppstadt as well as TCS Umwelttechnik GmbH, Austria. - 2-axle trailer - Length: 6,360 mm / Width: 5,039 mm / Height: 5,834 mm - Transport width: 2,539 mm / Transport height: 3,929 mm / Transport length: 6,414 mm - Required power: 250 – 370 kW - Chipping drum: 6 knives - Hardwood trunks up to Ø 480 mm, softwood trunks up to Ø 600 mm - Feed height: 950 mm / Feed width: 1,200 mm - Rotor diameter: 1,000 mm / Rotor width: 1,200 mm / Loading height: approx. 1,400 mm / Infeed width: approx. 2,000 mm - Variable feed speed / closed and robust chipping drum / simple design and maintenance - Variable knife protrusion and easy screen basket change for high-quality wood chips from P16 to P100 (G30 – G100)

Condition: excellent (used), Year of construction: 2014, operating hours: 917 h, functionality: fully functional, power: 250 kW (339.91 HP), overall weight: 19,000 kg, Doppstadt DH 812 / Wood Chipper / Shredder / Mulcher • Manufacturer: Doppstadt • Model: DH812 • Year of manufacture: 2014 • Operating hours: 917 hrs • Wood chipper • Power output: 250–370 kW • Infeed height: 95 cm • Infeed width: 1.2 m • Log diameter softwood: 60 cm • Log diameter hardwood: 48 cm • Drive power: 220 to 360 kW • Chipping rotor width: 1.2 meters • Chipping rotor diameter: 1 meter • Loading height: approx. 1.4 meters • Feed opening width: approx. 2 meters • Variable infeed speed • Easy screen basket change for quality wood chips from P16 to P100 • Hydraulic pressing device for infeed roller • LED lighting package: 1x discharge chute, 2x infeed, 1x internal lighting • Camera on discharge chute • Winter tires 600/50 R22.5 • Rear cross member with 18 tonne D=40 mm ball-type towing jaw, 12 volt socket, dual-circuit braking system, 4 hydraulic connections • Chipping blades: 6 pcs • Counter blades: 6 pcs • Chipping rotor speed: 400 to 640 rpm • Gross weight: 19,000 kg • German machine • Ready for immediate use _____ Crane: Palfinger Epsilon M70F • Manufacturer: Palfinger • Model: Epsilon M70F Credpfxsxqfl Rj Aagsi • Year of manufacture: 2020 • Lifting capacity: 1,280 kg at 5 meters; 890 kg at 7 meters; 660 kg at 9 meters; 540 kg at 10 meters • Maximum lifting capacity: 2,160 kg at 3 meters • Grapple: Cranab CE 280 • This offer is non-binding and subject to change. - Prior sale reserved. - Errors and/or typos excepted. - Sale subject to our general terms and conditions (GTC).

Condition: repair required (used), Year of construction: 2006, Two Maier MRZ 1200 Flakers for sale. One flaker is complete with vibrating table, separator and flaker body. Second flaker does not have vibrating table or separator. Both machines are without electric motors. Crsdpfx Aajxp Ic Aogji

Condition: good (used), Year of construction: 2011, functionality: fully functional, power: 37 kW (50.31 HP), first registration: 12/2011, overall weight: 3,200 kg, fuel type: electric, color: green, Wood chipper, three cutting knives, one perforating knife, 13x13 mm sieve, 2 feed rollers, main motor 37 kW, machine in good condition. Still in operation, scheduled for dismantling in 01/2026. Crsdpfx Aexpvf Eoagsi

Condition: excellent (used), Year of construction: 2007, Wood chipper Junkkari Oy Cedpfx Aaexprcmogjri