Osistek Mühendislik Dış Tic. Aş.

Condition: used, Year of construction: 2013, functionality: fully functional, saw blade diameter: 500 mm, CNC cutting center fully automatic CAT500 The machine is operational and ready for use Blade diameter: 500 mm Cutting angles in range: -45°/90°/+45° Operator panel with Windows Working direction from right to left Chip extraction Waste conveyor Label printer Itsdpfxex Ez Igo Aanjr

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1782385, Schirmer BAZ 1000, year 2007, in very good condition, fully operational, still installed and in working order. Available for inspection at any time, as it is currently operating in the factory. Itodpfx Aajx Ecb Sonsr

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, STOCK MACHINE: Working direction from left to right – Subject to prior sale – HECHT Exenso Profi Saw Cutting Center ESA-9 Comprising: Infeed: - Robust aluminum construction in proven profile design - Ergonomically adjustable working height from 985 – 1055 mm - Raw bar length from min. 400 mm up to max. 6,000 mm (optional extension kit available for up to 6,500 mm) - Material supply via chain conveyor for fully automated 9-compartment loading - Working direction from left to right Professional Cutting Saw: - Automatic bandsaw with pneumatic clamping system, consisting of 3 clamping elements - Infinitely variable saw feed via hydraulic unit - Workflow controlled via Exenso control system - The sawing area is secured at the front by a light curtain. - Bandsaw drive: 1.5 kW, frequency-controlled - Bandsaw dimensions: HBS 250 G 3320 x 27 x 0.9 mm, long service life - Cutting speed: in regulated operation 15-110 m/min - Cutting range: width 10-120 mm, height 10-80 mm Outfeed: - Robust aluminum construction in proven profile design - Ergonomic removal height from 760 – 820 mm (Note: not adjustable independently from working height) - Part outfeed via powered roller conveyor with steel rollers Itedpsxft I Aofx Aaner - Roller-guided ejection unit across three levels onto inclined discharge table - Maximum part length via automatic outfeed: 3,500 mm (optional extension kit available for working length up to 4,500 mm) - Scrap disposal via ejection unit – max. length 600 mm - Scrap pieces discharge via chute into customer-provided waste container (Note: waste container not included) - Remnant identification indicated at placement position for manual collection by operator Software / Data Interface: - HECHT Exenso ESA software (version specified after joint pre-acceptance) Operation: - Reinforcement bars are loaded onto the feed magazine in the infeed section by the operator according to specifications/display. - Transmission of the required cut lengths for the PVC cutting center from customer’s window manufacturing software via integrated data interface - Steel is automatically conveyed and fed - Optimized cutting to the specified lengths - Transport of steel to the pick-up position in the outfeed section - Optionally, double cuts can be made upon inspection Scope of delivery: - Bandsaw - Infeed conveyor - Outfeed conveyor - Light curtain - Control system with Win 10 and 15" touch screen - Data interface REST API can be adapted to an existing cutting center after inspection - The system is disassembled into several packages for transport Includes: 540.1082 1x Guard fence wall connection set with door switch ESA/SSA, usable right or left; 723.5011 1x bandsaw blade M42 3320x27x0.9 12-16 TPI, fine; 942.5541 1x minimum quantity lubrication for ESA & SSA saw systems – significantly extends bandsaw blade service life; Includes: minimum-quantity lube nozzle, 1L lubricant, holder for lubricant, filter for protection against contamination; 829.0201 1x additional buffer monitor for steel terminal ESA/SSA, additional display.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Cutting and machining center for PVC frame profiles and mullion profiles. The machine consists of a loading magazine, saw module, G-module for PVC processing, cross table for manual insertion of steel reinforcements, screwing module with an automatic underscrewdriver, drilling module for dowel holes, longitudinal saw for mullion profiles, and outfeed table with hand screwdriver for the strike plates. Ijdpfoxbdnrjx Aanetr Available end of September 2025.

Condition: used, Year of construction: 2006, Rotox PVC window and door production line, cutting center, machining center, 4-head welding and cleaning lines, 2 hardware assembly tables, 2 glazing tables, profile bending machines, and all other necessary machinery with a capacity of 200 units per 7 hours. IZO glass production line Stefiglass, 2 m height, with automatic Macotec table and automatic vacuum glass sheet loader with racking storage for glass, HEGLA VSG A 37 plus laminated glass cutting table, butyl extruder, thiokol extruder, 2 argon filling stations, Torneti fusion glass furnace, and all other smaller machines, racks, trolleys, etc. Capacity 300–400 units per 7 hours. Itodpfx Aaew Skcrsnsr

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 25019, Cutting and processing center STUERTZ STBAZ-IPT 40000-S-V Used, year of construction 2000 Fully automatic CNC sawing and processing center for PVC plastic profiles, mechanically in very good condition for this age. Sawing, processing, screwing reinforcement, drilling through steel reinforcement, label printing. Database with Gealan, Rehau and Aluplast profiles Documentation, additional photo and video available. We can carry out installation and commissioning. Itjdpfx Aew Edyfoansr

Condition: used, Year of construction: 2006, functionality: fully functional, Stabbearbeitungszentrum by STB-Graff, fully functional with integrated screwdriver for fastening steel reinforcements, for processing water drainage slots, handle holes in steel, lock cases, cylinders, door lock processing, etc. Isdew A Ax Iopfx Aanjtr

Condition: used, Year of construction: 2009, No. 3228 Cutting and processing center Schirmer BAZ 1000-G6NU Tandem Used, year of construction 2009 G6 module Center seal punch Drilling and trimming unit VU saw 90° saw Belt conveyor Horizontal circulation buffer Automatic steel infeed station Itjdpfx Aaewluhmoner Bar processing center Screwing stations Drilling stations Milling stations Closing part setting stations Bar sorting system Sale on behalf of customer, ex location Slovakia, without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Year of construction: 2011, functionality: fully functional, Federhenn's fully automated rod machining center performs all the machining required for windows and front doors in a process-optimized manner. Capacity: approximately 100 rods per 8 hours. Iedjwgd Acspfx Aanstr

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Machine with 3 work stations and 3 transport clamps Electromagnetic linear motor Complete SCHIRMER BAZ 100-G4/SVU centre with stations connected by a "REAL BUFFER" system for time compensation and reinforcement zone. More flexible "Flat-Line" version to accept all types of profiles. For cut profiles up to 3.750 mm (PVC can be cut and machined from 3.750 to 4.450 mm with manual extraction) Control under WINDOWS TWINCAT with BECKHOFF C6140 PC with touch screen. The first station has an automatic loading table for 9 profile bars, a transport clamp with an electromagnetic linear motor, and two work modules, one for machining PVC bars, with 4 CNC axes, rotating with 6 high-frequency motors to work at any angle, and another for cutting with a 500 mm saw blade with variable angles between -45º and + 45º. Label printer and a second extraction clamp with an electromagnetic linear motor to reduce transport times. REAL INTERMEDIATE BUFFER with 27 slots with independent movement to make station times independent, with 8 positions for manual insertion of reinforcement, with indicator lights. Second SBZ-I station with electromagnetic linear motor transport clamp, two work modules, one for screwing, with two screwdrivers (one for frames and one for leaves) with automatic feeder for one type of screw, and the second module has 2 CNC axes and the following drilling motors for PVC + reinforcement: - 1 horizontal drilling unit with a diameter of 6.5 mm (posts and fixing to the work) - 1 horizontal drilling unit with a diameter of 3 mm (locks and square marks) - 1 horizontal drilling unit with a diameter of 3 mm (locks and square marks) - 1 vertical drilling unit from below with a diameter of 3 mm (for hinges) - 1 vertical drilling unit from above with a diameter of 3 mm (for hinges) - 1 vertical drilling unit from below, triple head for 10/12/10mm handles Output table with motorized belts. Ijdpfxouhm N Ds Aanotr Complete fence with electric closing doors. Possible to see the machine in use until October 11 Exworks price, operational, without warranty Installation, programming and warranty with optional extra cost (only in Spain)

Condition: good (used), Year of construction: 2004, functionality: fully functional, total length: 11,500 mm, total width: 3,800 mm, total height: 2,500 mm, Soenen Hendrik DEM 3 machining centre, year of manufacture 2003-2004, equipped with tooling for processing water drainage slots and ventilation in PVC profiles, including screwing and drilling handle inserts in steel. The machine consists of a loading table with a magazine for 12 profiles, a machining unit, and an outfeed table with a magazine for 12 profiles. The machine is in good condition, has been dismantled, and is currently stored in our warehouse. A video of the system was recorded prior to dismantling and can be viewed upon request. The machine is programmed for Kömmerling 76mm AD and MD profiles; other profiles can be programmed on request. The price includes dismantling and loading onto a truck. Iodpfx Aajrztl Ssnstr

Condition: excellent (used), Year of construction: 2011, rofile width max 140 mm Profile height max 190 mm Itodpfem H Ud Usx Aansr Stave length max 6.500 mm Drilling aggregates 2 Number of milling spindles 3 For aluminium Number of clamping devices 4 Feedrate max 65 m/min Continuously variable feed Automatic feeding Yes CE marking Declaration of CE-conformity

Condition: excellent (used), Year of construction: 2012, The Vertical Machining Center enables drilling, milling and cutting operations and cornering within the scope of technical capabilities indicated in the manual in details: plastic, PVC, ABS, methacrylic, polycarbonate, thermoplastic, composite, aluminum. The vertical work table allows for easy feeding and unloading of processed details and reducing the maximum size of the device to the minimum necessary. Tool change with the use of a 10-element magazine located on the side of the device, it enables various works to be carried out without the need to remove the workpiece from the table. Maximum dimensions of the processed detail: X= 4200mm Y= 1600mm Z= 20mm Rapid traverse speed (m/min): X=30 Itjdpfsmzbr Ssx Aanjr Y=30 Z=15 Set of milling heads T1 and T2: Spindle power (kW) - 3.3 Rotation speed (rpm) - max 18000 Electric spindle with clamp - ER32 T3 Drill Head Assembly: Spindle motor power (W) - 370 Rotation speed (rpm) - max 2800

Condition: new, Year of construction: 2024, machine/vehicle number: 2024, STEEL CUTTING MACHINE with ONLINE-PC-STEUERUNG350 fully automatic steel cutting machine for reinforcing steel cutting in a single - or double cut according to requirement. Optimized cutting with residual lengths. The system consists of an automatic Vorlegemagazin with 12 seats, a hacksaw and a belt conveyor to the removal of cut-to-length steel profiles. Rest lengths to promote after length in a rest length basket, transport or waste basket. The steel profiles are processed in the process, while the profile bar is precisely positioned by a transport gripper with linear motor and rotary encoders. Isdpfxscmqkmj Aanstr The saw cut is made from the top, Microdosier-cooling-lubrication system ensures optimum cooling of the blade. The profile is, profile cross section regardless, pneumatically. Free-standing system with PC control or in combination with an automatic cutting machine, plastic-BAZ or SBZ. In a combination of stroke with the automatic cutting machine, BAZ or SBZ is synchronized. Profile lists for the store in the template magazine displays the employee on the TFT screen. The finished steel profiles are taken from the belt conveyor, acknowledged and filed in car, or manually pushed to the Stahlein-schubstation in the PVC profiles. New facility 10 weeks delivery time