Hartum Sp. z o.o.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AE00003735, overall weight: 4,300 kg, input frequency: 50 Hz, input current: 126 A, input voltage: 400 V, warranty duration: 12 months, Basic information Manufacturer: SCM Group / DMC Model: DMC Eurosystem M4 1350 Year of manufacture: 2023. Condition: unused, new Operating hours: 0 h Working width: 1.350 mm Working thickness: 3-200 mm Feed speed: 2-16 m/min Power supply: 400 V, three-phase, 50 Hz Rated current: 126 A Weight: approximately 4,300 kg Serial number: AE00003735 Location: Tenja, Croatia Availability: immediately Description; For sale is an unused SCM DMC Eurosystem M4 1350 automatic wide-belt sanding and calibrating machine, manufactured in 2023. Bwodpfx Abozyghletst The machine has never been used in production and has 0 operating hours. It is installed at our production facility and is available for inspection by prior appointment.   Working unit configuration 1st working position - sanding roller • R 320-2620 sanding unit • Roller diameter: 320 mm • R45 rubber-coated roller, 45 Shore hardness • 15 kW motor with frequency inverter • Oscillating abrasive-belt blowing and cleaning system 2nd working position - brush unit • BF 300 brush unit • SI 300-E helicoidal brush roller • 3 kW motor with frequency inverter • Abrasive inserts, grit 180 and 240 • Automatic electronic brush position setting • Side oscillation and reversible brush-roller rotation 3rd working position - brush unit • BF 300 brush unit • SI 300-E helicoidal brush roller • 3 kW motor with frequency inverter • Abrasive inserts, grit 180 and 240 • Automatic electronic brush position setting • Side oscillation and reversible brush-roller rotation 4th working position - superfinishing sanding pad • S-2620 unit with superfinishing sanding pad • PE 32/L EPICS electronic sectional sanding pad • Segment pitch: 32 mm • 11 kW motor with frequency inverter • Electronic working-pressure control • Oscillating abrasive-belt blowing and cleaning system   Outfeed finishing unit • SB/U oscillating finishing unit • SB 200 UFC Ultra Fine brush roller • Silicon-carbide fibres • Rotating blowers for final workpiece cleaning Additional equipment • Fixed working height of 900 mm • BL 32 electronic infeed panel-reading bar • EPICS electronic sectional-pad system • Vacuum conveyor system with motor up to 7.5 kW • Perforated vacuum conveyor belt • Rubber-coated conveyor belt, 50 Shore hardness • 2.2 kW conveyor-belt drive motor • Front and rear roller support tables • Eye-M industrial PC • 21.5-inch Full HD touchscreen • Maestro Pro-Sand control software • Remote service capability • Operator interface in English and Croatian • CE-compliant version Inspection and terms of sale; The machine is available immediately and can be inspected by appointment at our production facility in Antunovac, Croatia. The machine is offered ex location. Dismantling, loading, transport and installation at the buyer's site will be agreed separately. All technical information is based on the original SCM quotation and the machine identification plate. The buyer may verify the specifications and condition during inspection. Additional photographs, videos, the original technical specification and the relevant SCM documentation are available to serious prospective buyers. Price; EUR 125,000 net, plus VAT - negotiable

Condition: excellent (used), Year of construction: 2023, operating hours: 60 h, functionality: fully functional, machine/vehicle number: AE00003516, grinding width: 1,370 mm, overall weight: 1,800 kg, grinding height: 170 mm, workpiece height (max.): 170 mm, workpiece width (max.): 1,350 mm, - Wide-belt sanding machine DMC SD 70 RCS 135 - DMC SD 70 model, RCS 135 version First "R" unit with roller and second "CS" combination unit with roller/sanding pad - Working width mm 1,350 Min./Max. working height mm 4-170 Sanding belt dimensions mm 1,370x2,620 Main motor power kW (HP) 11 (15) Feed rate m/min 4.5/9 - 160/85 rubber-coated calibrating roller, diameter 160 mm, 85 Sh - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Sh - 2nd position - Hard sanding pad with manual adjustment of the working height - Motor power, 1 unit: 11 kW (15 HP) - Electronic ammeter for the main motor to display current draw - Electronic display of the working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers Bjdpfx Aszydafjbtowt - Kickback protection at the infeed before the first unit - Rubber feed carpet, 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Carpet feed with two speeds 4.5 / 9 m/min with gear motor - Automatic carpet centering

Condition: good (used), Year of construction: 2009, operating hours: 2,500 h, functionality: fully functional, We are offering this used Costa Delta TRI-T-T 1350 wide belt sanding machine, manufactured in 2009. Bedpfx Aszx Tgrsbtjwt The machine has only 2500 operating hours and is in good condition. Further details can be found in the data sheet. If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2018, Wide-belt sanding machine SCM DMC SYSTEM TM 1650 Year of manufacture: 2018 Sanding width: 1,650 mm Workpiece thickness (min.): 3 mm Bwedpjzx R Dnofx Abtst Vertical clearance: 170 mm

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Very well-maintained and robust Heesemann MFA 8 wide-belt sanding machine for professional use. This machine is particularly suitable for surface, fine, and finish sanding and features electronic control as well as cross and longitudinal sanding units. The machine is in very good used condition. Technical data: Manufacturer: Heesemann Type: MFA 8 Year of manufacture: 1994 Machine number: 9411252 Working width: approx. 980 mm Feed width: 1300 mm Voltage: 400 V Frequency: 50 Hz Total connected power: approx. 50 kW Rated current: 100 A Sanding belt dimensions: 4,800 × 150 mm Pressure pad belt: 4,450 × 140 mm Constant working height Electronic control Bwjdpfx Abjzxyfhotst Cross-belt unit Longitudinal sanding unit Brush units Suitable for finish, fine, and surface sanding Weight: approx. 4,000 kg Equipment: Electronic control panel Pneumatic unit adjustment Feed carpet Dust extraction connections CE marking Transportation possible for an additional charge! The machine is currently still at the customer's site but would be immediately available! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-256-73-1249, working width: 1,350 mm, grinding belt length: 2,150 mm, workpiece height (max.): 160 mm, grinding belt width: 1,370 mm, volume flow: 3,660 m³/h, TECHNICAL DETAILS Working width: 1,350 mm Workpiece thickness: min. 3 mm / max. 160 mm Sanding belt width: 1,370 mm Sanding belt length: 2,150 mm Unit 1 – Contact cylinder Sanding belt cutting speed: 18 m/s Rubber cylinder: 65° Cylinder diameter: 240 mm Combination sanding unit Sanding belt speed: 12 m/min Rubber cylinder: 55° Shore Cylinder diameter: 140 mm Width of pneumatic foot: 80 mm MACHINE DETAILS Voltage: 400 V / 50 Hz Drive power Unit 1: 15 kW Drive power Unit 2: 15 kW Total power consumption: 33 kW Dust extraction connection Unit 1: Ø 180 mm Dust extraction connection Unit 2: Ø 180 mm Dust extraction volume: 3,660 m³/h Recommended dust extraction speed: 20 m/s Compressed air requirement: 20 l/min at 6 bar EQUIPMENT Sanding belt change on the left side Automatic clamping of the contact cylinder, e.g., during belt change Automatically adjustable rubber cylinder Grain size compensation on the contact cylinder Bodpfjzvnfwox Abtswt Combination sanding unit L with pneumatic foot for calibration Automatic anchoring/fastening Grain size compensation on the rubber cylinder Automatically adjustable pneumatic foot

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2005.09 261, overall weight: 12,500 kg, power: 180 kW (244.73 HP), input frequency: 50 Hz, input current: 350 A, input voltage: 400 V, Working machine. Planned dismantlig 2026-12 no manual or documents. Bwjdpfxszu I Eho Abtjt

Condition: used, Year of construction: 2022, overall weight: 6,350 kg, Sanding machine SCM DMC SY TC 1350 Year of manufacture: 2022 Bedpfozuzkkox Abtswt Working width: 1350 mm 3 sanding units: - Longitudinal - Transverse - Longitudinal - Brush Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 2019, Calibration grinding machine Manufacturer: Lingi Jianzhong Type: BSG2613C Year of manufacture: 2019 Technical data - Maximum working width: 1300 mm - Processing thickness: 5-80 mm - Processing length: 780 mm - Processing accuracy: 0.08 mm - Dimensions of the grinding belt: 1350x2800 mm - Grinding belt speed: 31 m/s - Roller diameter: 2x 320 mm - Total power: 165 kW Bjdpozuzc Tjfx Abtjwt - Main motor power: 2x 75 kW - Feed motor: 11 kW - Lifting motor: 2x 0.75 kW - Brush motor: 2x 0.75 kW - Feed speed: 10 - 30 m/min - Operating air pressure: 0.5 - 0.8 MPa - Volume of the dust extraction container: 24000 m³/h - Weight: 14.5 t - Overall dimensions: 3100x2100x3000 mm - Voltage: 380V 50Hz Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control Automatically Calibrating Sanding Machine Manufacturer: SCM Type: DMC system Year of manufacture: 2021 Technical data - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control - PLC terminal with 10.4" LCD color display Unit 1 TIE 5000 working unit for additional table, internal cross-padding - Sequencing system of the unit for belt change by only one machine operator - Automatic brake - Linear blower with timed activation for belt cleaning - Belt dimensions: 150 x 5,000 mm - Chevron belt dimensions: 140 x 4,710 mm PE16T EPICS electronic sector sanding, pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Motor with inverter power up to 15 kW Unit 2 DO19 orbital unit for 19 rotating disc brushes - Manual adjustment of the unit's working position - 1.1 kW main motor with inverter drive - Independent motor for controlling the orbital movement - Diameter of the rotating disc: 125 mm FT/19/125 Set with 19 rotating discs, diameter 125 mm Unit 3 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 4 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 5 SC 2620 working unit for super finish pad - Rotation of the belt in the opposite direction of the conveyor belt - Electronic belt swiveling control - Disc brake - Chevron belt dimensions: 1,370 x 2,186 mm - Belt dimensions: 1,370 x 2,620 mm PE16/C EPICS electronic sanding block with sector pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Inverter motor with a power of up to 15 kW Inverter-controlled vacuum motor integrated into the machine frame, up to 7.5 kW - Rubber-coated conveyor belt, 50 Shore - 4 kW conveyor belt motor with inverter drive Console with integrated PC eye-M and electronic Maestro Pro Sand control with tele service system Device connected to the machine that enables the use of the Maestro Pro Sand software. The integrated LED light strip enables the operator to monitor the machine's status in real time (emergency, operation, etc.) without having to be near the machine itself. Bsdpfszuzbcsx Abtowt It is equipped with a fanless industrial PC with protection class IP53 (IP65 on the front). This robust solution guarantees the highest level of resistance even under the most adverse environmental conditions that an industrial site can offer. The 21.5" LCD color display with a large 16/9 touchscreen enables particularly easy and efficient control of the machine's most important functions: - Full HD display resolution 1920x1080 - LED backlight - Capacitive

Condition: excellent (used), Year of construction: 2003, For calibration of solid wood/hard wood In line machine ( Fixed table hight : 900 mm ) Max working width : 52 - 1350 mm Min working lenght : 400 mm Working hight : 4 - 170 mm ( Digital motorized up/down ) Infeed speed : 3 - 18 mtr/min Bsdpfx Abezuvy Hetewt Configuration : 1 agg : Steel Roller/drum, 45 Kw 2 agg : Rubber roller/drum, 37 Kw (schore 85 ) 3 agg : Brush Extra new steel roller/drum + extra new rubber roller/drum included ( see pictures attached ) Extra 15 package of sanding paper included( brand new )

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Working width: 1350 mm Abrasive belt width: 1350–1380 mm Abrasive belt length: 2150 mm 1 contact roller unit 1 combined sanding unit EPS 52 – Segmented electro-pneumatic pressure shoe. Constant workpiece inlet height: 900 mm. Abrasive belt drive with wear-free system. Bwodpfxezumywj Abtet Abrasive belt blowing device Machine safety stop in case of improper use 7" graphic touch-screen display Conveyor belt feed with: adjustable feed speed via inverter, from 3 to 15 m/min. Infeed roller table, 250 mm wide, with rubber-coated rollers. Total installed power: approximately 33 kW Weight: approximately 4,000 kg Includes infeed and outfeed conveyors Few operating hours, used for approximately 3 years

Condition: used, machine/vehicle number: 008710, Max. machining width: 1300 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 3 Nr Bedpfoztat Uex Abtewt

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 4,600 kg, grinding height: 160 mm, height adjustment type: electric, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, grinding belt width: 1,400 mm, workpiece width (max.): 1,350 mm, Heesemann HSM.3 multi-purpose surface grinding machine with crosshead unit, calibration unit, and DB-S unit. An all-rounder in a compact space. Calibrating, veneer and lacquer sanding, texturing, polishing, sanding fillers, edge rounding, ... - Automatic workpiece thickness measurement Bodeztafwopfx Abtjwt - Adjustable vacuum, integrated into the machine body - Height adjustment not via a chain drive, but via direct drive - Non-driven rollers at the infeed and outfeed (2 each) - Industrial PC 15.6", terminal on the front left - Program memory for up to 1000 programs - Feed rate 3 - 15 m/min - MMI package - Program for remote maintenance - Program for dust extraction flap control - Cross-sanding unit, 15 kW, stepless sanding belt speed, for veneer sanding (longitudinal and transverse), lacquer sanding, saw-rough effect, with sanding belt cleaning, pressure bar with computer-controlled selective pressure control system CSD - Longitudinal sanding unit with pressure lamella belt and calibration function, 15 kW, stepless sanding belt speed, calibrating, fine sanding, and lacquer sanding, with sanding belt cleaning, pressure bar with computer-controlled selective pressure control system CSD - Rotating disc brush unit DB-S, for fine sanding, lacquer sanding, edge rounding, sanding fillers, polishing, texturing - Uninterruptible power supply - Energy Management System EMS - Ionization bar from above - Workpiece extraction system with individually controllable, rotating compressed air nozzles, inside the machine frame, conveyor belt cleaning program - LED lighting in the machine - and much more The machine is available in our showroom for demonstrations. Inspections and trial runs can be arranged by appointment.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, grinding width: 1,360 mm, grinding height: 160 mm, grinding belt speed: 18 mm/s, grinding belt length: 2,150 mm, 1. Unit with rubber contact roller/calibrating roller, motor power 15 kW 2. Unit - combined unit with rubber contact roller and grinding shoe, motor power 11 kW Bwsdpszr D Ersfx Abtot Feed rate 4+8 m/min Grinding height 3 - 160 mm Dimensions: approx. 2060x2660x2100 mm (W x D x H) Weight: approx. 3,800 kg The machine will be available from approximately the end of November/beginning of December.

Condition: used, Kündig ENORM 1300-2 wide-belt sander for the precise calibration and fine sanding of solid wood, veneer and wood-based materials. This robust industrial model, featuring two sanding units and a cleaning brush, delivers high material removal rates and precise surface quality in the furniture and interior fit-out sectors. Ideal for craft and industrial businesses with high quality standards, including a set of sanding belts. Technical data: - Working width: approx. 1,300 mm Bwodpfx Aozryxnsbtjt - Grinding units: 2 - Clearance height: max. approx. 150 mm - Motor power: 18.5 & 15 kW

Condition: used, machine/vehicle number: 008702, Max. machining width: 1350 mm Min. machining thickness: 3 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 3 Nr Bodpjzq Urgsfx Abtjwt

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide-belt sanding machine with electronic segmented sanding pad and finish sanding. Ideal sanding machine for interior finishing companies, also suitable for intermediate sanding before painting. Edge sanding machine with combination unit and electronic segmented pressure bar, edge segments can be switched on and off. Segment width of the pressure bar 35mm. Bodpfjzqvmrsx Abtjwt Contact roller pneumatically adjustable, low wear due to ribbed steel roller. Grain size compensation. Drive motor 7.5kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s. Belt feed steplessly adjustable via frequency inverter from 2.5 - 13 m/min. Pneumatic workpiece-controlled belt blowing device. Cleaning brush at the outlet. Constant working height of 900mm by adjusting the top part of the machine, thus also integrable into sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340mm. Workpiece height approx. 3 to 150mm. Common sanding belt dimension 1360 x 1900mm. 3 rubberized pressure rollers. Infeed roller table and foldable outlet table. Preparation for vacuum blower. The belt is perforated and connectors for optional blower are available. Alternatively, the belt can also be connected to the extraction system. Extraction connection 1 x 200mm, 1 x 140mm and 2 x 100mm. Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar engagement points at the front and rear, edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller. CE marking. Operating manual. Without the illustrated connection cable. Original paint, only retouched in places. Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150mm (LxWxH). Weight approx. 2400kg. The machine can be demonstrated on-site after prior arrangement. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: used, machine/vehicle number: 008654, Max. machining width: 1350 mm Min. machining thickness: 3 mm Working Table: adjustable Vacuum feed belt: yes Bwjdozpfbispfx Abtst No. Operating units: 2 Nr sectioned swab: yes

Condition: new, Year of construction: 2024, functionality: fully functional, UNITEK NICE 950 2N RKRT Working width 950 mm Sanding belt size 970 x 2150 mm Maximum working height 160 mm Calibrating roller, steel, Ø 150 Sanding roller, rubber-coated, Ø 150 Finishing pad 50 mm Sanding belt motor power 15 HP Sanding belt speed 18/16 m/s Feed motor with variable speed 0.75 HP Feed speed 4-20 m/min Table lifting motor power 0.33 HP Automatic sanding belt centering "ECO GEAR SYSTEM" Quick stop belt brake Oscillating tensioning rollers Rubber-coated pressure rollers Safety bar Electronic digital display of workpiece thickness Rollers on infeed and outfeed table, 2 pcs. Dust extraction 2 pcs. - Ø 160 Automatic work thickness positioning Additional equipment (included in the price): Belt motor power 20 HP Bsdpeznwp Asfx Abtjwt Automatic conveyor belt centering Oscillating cleaning blower, timer-controlled, 2 pcs. UNITEK NICE 950 1N KRT Working width 950 mm Sanding belt size 970 x 2150 mm Maximum working height 160 mm Calibrating roller, steel, Ø 150 Finishing pad 50 mm Sanding belt motor power 10 HP Sanding belt speed 18 m/s Feed motor with variable speed 0.75 HP Feed speed 4-20 m/min Table lifting motor power 0.33 HP Automatic sanding belt centering "ECO GEAR SYSTEM" Quick stop belt brake Oscillating tensioning roller Rubber-coated pressure rollers Safety bar Electronic digital display of workpiece thickness Rollers on infeed and outfeed table, 2 pcs. Dust extraction 1 pc. - Ø 160 Automatic work thickness positioning Additional equipment (included in the price): Oscillating cleaning blower, timer-controlled UNITEK NICE 650 1N KRT Working width 650 mm Sanding belt size width x length 670 x 2150 mm Maximum working height 160 mm Calibrating roller, steel, Ø 150 Finishing pad 50 mm Sanding belt motor power 10 HP Sanding belt speed 18 m/sec Feed motor with variable speed 0.75 HP Feed speed 4-20 m/min Table lifting motor power 0.33 HP Self-centering of sanding belts using the system “ECO GEAR SYSTEM” Quick stop belt brake Oscillating tensioning roller Rubber-coated pressure rollers Safety bar Electronic digital display of workpiece thickness 2 rollers on infeed and outfeed table 1 dust extraction port Ø 160 Automatic work thickness positioning Additional equipment (included in the price): Mobile cleaning blower for the sanding belt Warranty 12 months on spare parts.

Condition: excellent (used), Year of construction: 1996, grinding width: 1,350 mm, power: 42 kW (57.10 HP), COSTA 71 CTT 1350 wide belt sanding machine, manufactured in 1996. Configuration: 1 hard rubber sanding roller. 1 electronic segmented sanding pad. Air blow-off system. Bsdpfx Aoznvp Iobtswt Working width: 1,350 mm. Pneumatic (compressed air) cleaning system for all units. Vacuum worktable with integrated fan. Construction: Designed for use in a production line with a fixed working height; the sanding units move while the workpiece remains at a constant level. 2 motors, total power: 42 kW.

Condition: used, Year of construction: 2012, Condition: Used, ready for operation • The first unit is equipped with a Ø190 mm calibration roller with a grooved rubber coating, hardness 90 Shore. • The second, combined unit contains a Ø190 mm sanding roller with a grooved rubber coating, hardness 40 Shore. In addition, it includes a hard felt sanding pad mounted on an aluminium rail, with a graphite-grain surface for fine sanding. The pad is equipped with timer-controlled automatic operation. Options: Electronically controlled sanding pad divided into 42 sections. The unit is driven by an independent motor with inverter-controlled speed adjustment and the possibility of changing the direction of rotation. • The third unit is a finishing brush roller. Technical specifications: Working width: 1350 mm Sanding belt size: 1380 x 2200 mm Workpiece thickness: 3–160 mm Motor power of first unit: 11 kW Motor power of second (combined) unit: 11 kW Feed speed: 3–16 m/min Feed motor power: 1.5 kW Pneumatic connection: 6 bar Air consumption: 17 Nl/min Extraction port diameter: 158 mm Extraction air speed: 25 m/min Required extraction capacity: 3095 m³/h Net machine weight: 2450 kg Width: 2320 mm Length: 2030 mm Height: 2050 mm The table movement is carried out by four large-diameter trapezoidal threaded lead screws, which are mounted externally on the machine frame. Table rollers: one roller is positioned before and one after the feed belt. • The feed belt has a 60 Shore hardness rubber surface with a concave pattern. • Precise tracking of the feed belt is ensured by an automatic centering unit. PRESSURE HOLD-DOWN UNITS • Rubber-coated pressure rollers are positioned before and after the processing units to ensure accurate holding-down of the parts being sanded. SAFETY EQUIPMENT • with CE standards. Options: • Electronically controlled sensing unit for the 42-section sanding pad • Front table extension with two roller cylinders • Rear table extension with two roller cylinders • Complete vacuum table with vacuum pump: 2.2 kW – 3 HP • Electro-pneumatic engagement/disengagement of the contact roller • Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System) • Kombi R (drum) Ø190 – electronically controlled sanding pad divided into 42 sections (32 mm pitch) • Electro-pneumatic engagement/disengagement of the contact roller • Electro-pneumatic engagement/disengagement of the sanding pad • Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System) • Possibility of reversing the sanding belt rotation direction • Electronic inverter 11 kW (15 HP) • IPC COMPACT 8.5" control panel • Scotch Brite roller Ø200 mm – 1.1 kW – 1.5 HP Bedpfxjzlxp Se Abtswt Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Year of construction: 1984, Working width 1350 mm Number of sanding units x st. Used machine Year of manufacture: 1984 Condition: completely inspected + serviced Equipment and technical data: - Incl. combi unit with contact roller and sanding pad - with height-adjustable contact roller for calibrating - with workpiece-controlled air-cushion pressure pad - 4-way adjustable grit compensation - with pneumatic belt tensioning device - with a rotating texturing brush on the outfeed side of the machine - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Feed speed infinitely variable 2.5 - 12.5 m/min. - with roller table at the infeed Bodszlbpnopfx Abtowt - with separate additional texturing brush - with roller table at the outfeed - with digital display device for the electric-motor-driven workpiece thickness adjustment - with automatic workpiece thickness adjustment - Extraction ports 2 x 200 mm - Feed belt is OK; has a defect in one place (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Images show the machine in a not-yet-inspected condition! Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 1976, Working width 1350 mm Number of sanding units x st. Second-hand machine Bwodpjzk Nyrofx Abtst Year of manufacture: 1976 Features and technical specifications: - grinding from below - Material feed via rubber rollers - Non-contact control of oscillation - Quick-change pressure bar - Electric motor-driven adjustment of tool thickness with an easy-to-read display Digital display - Push-button control with contactor control - Sanding width 1350 mm - Maximum workpiece thickness: 150 mm - Sanding belt width 1360 mm - Sanding belt length 1900 mm - Roller feed speed switchable between 10 and 20 m/min - Compressed air connection: 6 bar - Air consumption approx. 180 NL/min Motor power 17.5 kW Dimensions W x D x H 1800 x 1100 x 1520 mm Weight: 2,600 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1998, Working width 1350 mm Number of sanding units x st. Used Machine Year of Manufacture: 1998 Condition: Completely overhauled by Heesemann specialists, including a new feed belt; current photos to follow Features and Technical Specifications: 1 automatic belt sander with combination unit with electronic link-type pressure bar for sanding soft and hard veneers calibrating and fine-sanding solid wood calibrating workpiece carrier panels Removal of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings Sanding of barrier films with graphical operator terminal NC-controlled thickness adjustment from 3–150 mm Activation of the calibration roller via the terminal with patented CSD articulated pressure beam for compensating workpiece tolerances up to 2 mm Sanding width: 1,350 mm Sanding belt length: 2,150 mm Sanding belt speed (frequency-controlled): approx. 2–18 m/sec Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air consumption: 15 NL/min Bodpfx Aszk Nxzebtowt With belt dust extraction: 490 l/min Exhaust connection: 180 mm Air requirement for sanding unit: 1,800 m³/h Required air velocity: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2,500 kg Dimensions WxDxH 2090x1670x2020 mm