Wermo AS

Condition: like new (used), Year of construction: 2023, operating hours: 2 h, functionality: fully functional, working width: 400 mm, height adjustment type: electric, warranty duration: 6 months, Roller application machine Manufacturer: Cosma Knsdpfx Aajwu T Abebsc Type: 400 RC Year of manufacture: 2023 Demonstration machine - has never been used in production! 2-roller application machine for applying oil With Cosma's roller application system, oils are applied to, among other things, solid wood floors (parquet), paneling, stairs, garden materials, scaffolding timber, and wall decorations. Working width: 400 mm Suitable for workpieces: Thickness: 10 - 50 mm Working height: 900 mm Equipped with: - Dosing roller, 0.37 kW - Rubberized application roller, 0.37 kW, 25 Shore With electric height adjustment and mechanical height indicator Control panel for: Feed speed, amperes per roller, and roller height adjustment

Condition: excellent (used), Year of construction: 2004, I sell the 1-cylinder roller coater BURKLE SLC1300. Year 2004 Working width 1300mm Very good condition. Fully working. Kedpswun Hbjfx Aabenc Available immediately.

Condition: excellent (used), Year of construction: 2011, I sell the 2-cylinder roller coater Cefla Sorbini Smartcoater SP1. Year 2011 Working width 1300mm Suitable for wet on wet, stains, primers and sealers coating application. Very good condition. Fully working. Available immediately. Knedpfx Aaswink Neboc

Condition: used, Year of construction: 2008, machine/vehicle number: 0117580020, Printing machine for non-synchronized printing of wood grains or other designs from above on flat workpieces in one-colour printing, suitable for Knodjwhp Dzspfx Aabec aqueous and UV printing inks. - Type: SLDR 1300 - Year of manufacture: 2008 - Operating side: right - Workpiece width: 1.250mm - Min. workpiece length: 350mm (300mm) - Workpiece height: ~ 3-100mm - Suitable for printing ink, water-soluble and UV printing inks Transport system: - Conveyor belt width: 1,230mm - Max. Production speed: 10m/min. - Feed speed: 8-25m/min. - Rubber coating 60Shore (6By1) - Diameter 186mm Application unit: - Rubber coating 50Shore (5by1) - Diameter: 238mm - Engraving cylinder, diameter: 174mm - Separate, infinitely variable FU direct drive for engraving cylinder and application roller. Engraving roller: - Diameter - circumferential speed Machine dimensions: - Installation length: 800mm - Working height approx. 900mm +-20mm - Width: ~ 2.700mm - Electrical connected load: 5kW - Weight: approx. 1.400kg - Location: in stock

Condition: used, Year of construction: 1987, With this roll press, you can press different materials together in a single pass. Application example: Previously, sandwich panels were bonded and pressed with this machine. Technical data: - Manufacturer: Bürkle - Type: AM - Year of manufacture: 1987 - Working width: 1,600 mm Knodpfjwd Nx Dox Aaboc - Working height: 880 + - 20 mm - Part height 20 - 160 mm - Operating side left - Pressure cylinder from above, rubberised - Counterpressure cylinder from below, rubberised - Width of counterpressure cylinder 1,700 mm - Feed 3 m/min. - Total electrical connection - Volt/Hz 400/50 - Location in warehouse in Blomberg

Condition: used, Year of construction: 1994, machine/vehicle number: 6613, With this roll press, you can press different materials together in a single pass. Application example: Previously, sandwich panels were bonded and pressed with this machine. Technical data: - Manufacturer: Bürkle - Type: AM - Year of manufacture: 1994 - Working width: 1,600 mm - Working height: 880 + - 20 mm - Part height 20 - 160 mm - Operating side left - Pressure cylinder from above, rubberised - Counterpressure cylinder from below, rubberised Kodpfowc Skgox Aabsnc - Width of counterpressure cylinder 1,700 mm - Feed 3 m/min. - Total electrical connection - Volt/Hz 400/50 - Location in warehouse in Blomberg

Condition: like new (used), Year of construction: 2017, Barely used UV line for panels or flooring Kodpfx Ajv Ux R Sjabenc

Condition: used, UV line with 3 rollers and 2 uv lamps Kedpfov Ux Nuox Aabenc 1350mm working width

Condition: good (used), Year of construction: 1992, working width: 1,300 mm, Double-sided glue applicator / 2-roller glue applicator Manufacturer: AMOD / Bürkle Type CDL 1300 Suitable for double-sided glue application Working width 1300 mm With 2 new galvanized dosing bars Operating voltage 380 V 2-phase 50 Hz Control voltage 220 V Rated current 1 A Fuse protection 16 A (provided by customer) Including 2 additional glue rollers / good visual condition The machine will be technically inspected and cleaned upon order. Ksdpov Sa Utofx Aabenc

Condition: excellent (used), Year of construction: 2011, BÜRKLE PAINT LINE Model year: 2011 Stock no.: 2002451BXM Consisting of: Disc conveyor 900 Roller coating machine e.a. sy-Coater RCLD 1300 Distribution/scraping brush machine VBM 1300 Cleaning machine RMB 1300 Disc conveyor 900 Central cabinet, Control panel with touch screen Technical data: Software Easy line, touch screen TP177 Micro Working width = 900/1300 mm, working side right Feed speed 5–25 m/min Distance between machines approx. 25 mm Power: 400 volts, 50 hz, 3 phases, rated power 10kw, rated current 23 AMP, fuse 35 AMP Electrical cabinet 1600x500x2200mm Operating side right Pneumatics Air pressure 6 bar P1 | G 1/4 | 50 NL/min P2 | G 1/4 | 10 NL/min Extraction per connection point At air speed approx. 24 m/sec. 140 mm | 1100 m³/h Roller application machine Bürkle RCLD09M Rubber application roller above/below Chrome-plated dosing roller above/below Working width 1300mm Workpiece length min. 400mm Workpiece height 3-80mm Kjdpov I Ur Sofx Aabsnc Brushing machine VBM For:Scraping/brushing/polishing of liquid wood stains, (solvent or water-based stain) or for polishing UV waxes Working width Workpiece length min. 350mm Workpiece height 110mm Cleaning machine RMB For cleaning brushes 1 or 2 with cleaning agent (water or solvent) and drying them.

Condition: ready for operation (used), Year of construction: 2003, Brand: Burkle Model: SLC Machine no: 10362-02 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Kedpsv Hw Hcjfx Aabenc Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002442BXM

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 10362, Brand: Burkle Model: SLC Machine no: 10362-01 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Kedpev Hn N Ujfx Aabenc Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002443BXM

Condition: used, Year of construction: 1997, - Producer Giardina - Type G 95 / 05 - Year of construction 1997 - Working width 1.300 mm - Working height 900 mm +-20 mm - Part height 3 - 90 mm - Operating side, right - Roller for lacquer ca. 55 Shore - Metering roller 165 mm - Reverse drive - Total connection power 3,4 kW - Weight 1600 kg - With switch cabinet - Voltage / HZ 400 / 50 Kjdpovupc Sofx Aabsnc - Location, on stock D-32825 Blomberg - Commodity code 8479 8997 - Voltage fluctuation max. +/- 5 %

Condition: used, Year of construction: 1998, - Producer Sorbini - Type T/20MF - Year of construction 1997 - Working width 1.300 mm - Maschine is overhauling, very good condition - Working height ~ 880 - 920 mm - Part height ~ 5 - 80 mm Ksdovupc Eopfx Aabjnc - Operating side, left - roller diameter ~ 248 mm - Metering roller ~ 174 mm - Reverse drive - Double diaphragm pump 1 Stk. - Length 950 mm - Width 2.550 mm - Height 1.540 mm - Weight ~ 1.220 kg - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock - Voltage fluctuation max. +/- 5 % THE PICTURES are not original pictures, They are only an example of a reconditioned machine

Condition: like new (used), functionality: fully functional, UV roller painting line Barberan , DMC , Cefla , Burkle 1300 mm. Complete : 1. Barberan roller coater 2. Barberan roller coater reverse 3. UV 1 tube dryer 4. Barberan roller coater 5. UV 2 tube dryer Knjdovcmi Eopfx Aabjc 6. DMC grinding machine . 7. Brush machine . 8. Barberan roller coater 9. UV 2 tube dryer 10. Burkle roller coater 11. UV 2 tube dryer

Condition: good (used), Code: 0442 Brand: VALTORTA Model: FV/TR Roller coater machine REVERS for rollcoating of basecoats and U.V. top coats Knedpfx Aeu T Hbweabec Conveyor feed system with auto-centering system to keep the belt in track Working width mm 1300 Working table height from the floor mm 900 Working thickness mm 1/180 1 Rubber covered spreading roll diameter mm 240 1 Steel dosing roll unit n° 1 diameter mm 165 1 Rubber covered spreading roll REVERS unit diameter mm 240 1 Steel dosing roll REVERS unit diameter mm 165 Rubber covered conveyor rolls diameter mm 190 Rubber covered conveyor rolls diameter mm 60 Rubber covered roll motor power Hp 2 Steel roll motor power Hp 1 Rubber covered roll REVERS unit motor power Hp 2 Steel roll REVERS unit motor power Hp 1 Doctor blade REVERS unit motor power Hp 0,5 Feed speed mt/min 6/30 Independent electrical cabinet with easy commands Machine installed on wheels and rails Overall dimensions mm 2700 x 2000 x 1550 h Weight kg 2700

Condition: used, Year of construction: 2001, - Manufacturer Barberan - Type BRB-1400 - year of construction 2001 - Working width 1330 mm - Working height ~ 880 - 900 mm - Part height ~ 5 - 100 mm - Operating side right - Lacquer application roller ~45 Shore - Roller diameter 245 mm - Application cylinder speed 4 - 24 m/min - Quick-change system Application roller - Hard chrome-plated metering roller 174 mm - Dosing roller Speed 4 - 24 m/min - Reverse drive - Solvent-resistant conveyor belt - Double diaphragm pump - Travelling on flanged rollers without - Feed adjustable via frequency converter 5 - 25 m/min - Length: 980mm Kodpfx Aasuyky Tjbenc - Width: 2.800mm - Weight 1,680 kg - Volt, Hz 400 / 50 - Location, in stock - Machine has been overhauled in 2022

Condition: used, Year of construction: 1997, machine/vehicle number: MR1TLL97037, - Manufacturer Cefla / Sorbini - Type T / 20-SP-1 - year of construction 1997 - Working width 1300 mm - working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side right - Filler application cylinder ~250 mm - Hard chrome-plated metering roller 174 mm - Hard chrome-plated smoothing roller 245 mm - Reverse drive - Belt transport - Belt control - Length ~ 1640 mm - width 2590 mm - height ~ 1700 mm - Feed rate 6 - 24 m/min - Total connection 4.5 kW Knsdpfxoumvpfe Aabsc - Weight 2,000 kg - With switch cabinet - Volt, Hz 400 / 50 - Location, not in stock

Condition: used, Year of construction: 2001, - Producer Bürkle - Type CASC 1400 - Year of construction 2001 - Working width 1350 mm - Working height 900 + - 20 mm - Part height ~ 5 - 100 mm - Operating side, right - Roller for putty EPDM, 240 mm - Qick changes system for roller - Metering roller 198 mm - Smoothing roller hard chromed 240 mm - Belt transport system - Length ~ 1.450 mm - Width ~ 2980 mm - Mobile, with flange of wheel - Feed speed 5 - 25 m/min - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock - Commodity code 84242000 Knjdpsumvl Hsfx Aaboc - Voltage fluctuation max. +/- 5 %

Condition: used, Year of construction: 1993, machine/vehicle number: 4610.17, - Manufacturer Bürkle - Type DAL 1-1300 R - Year of manufacture approx. 1990 - 1993 Kjdpfx Asumvkveabenc - Working width 1300 mm - Machine is being overhauled, then in very good condition - Working height 870 mm - Part height 3 - 80 mm - Operating side right - Paint application roller 50 Shore - Dosing roller hard chrome-plated approx. 174 mm - Counter-pressure cylinder rubberized - Belt transport - Length 1050 mm - Feed adjustable via handwheel 6 - 30 m/min - Total connection approx. 2 kW - Weight 3250 kg - With control cabinet - Volt, Hz 400 / 50 - Machine number 4610.17 - Product number 8479 8997 - Voltage fluctuations max. +/- 5 %

Condition: excellent (used), Year of construction: 1996, I sell the 1-cylinder roller coater BURKLE SAL. Kjdpfst S Eb Uex Aabsnc Working width 1300mm Very good condition. Fully working. Available immediately.

Condition: excellent (used), Year of construction: 2002, I sell the 1-cylinder roller coater BURKLE SAS1300. Working width 1300mm Very good condition. Fully working. Available immediately. Kjdpst S D Umefx Aabonc

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 8484.20, height adjustment type: mechanical, total length: 2,690 mm, total width: 1,200 mm, total height: 1,700 mm, input frequency: 50 Hz, Bürkle glue spreader Manufacturer Bürkle - year of construction 1998 - DAH 1300 Technical data: - Type DAH - 4 roller machines - Workpiece width 50-1300mm - Workpiece length 250mm - Working height 3-100mm - Application roller diameter 239mm - Dosing roller diameter approx. 174mm - Main motor approx. 3kW - Feed rate max. 45 m/min Knsdpfx Ajt I S H Ajaboc The sale takes place under exclusion of any warranty.

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Electrical preparation for integrating the roller coating machine into a coating line Technical data Working width: 1300 mm Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Knodot Dx U Sepfx Aabec Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm

Condition: as good as new (ex-display), Year of construction: 2017, machine/vehicle number: 0141550020, working width: 1,300 mm, The BÜRKLE LFC painting line is used for the continuous application of primer, base coat or protective varnish to surfaces. The use of a UV lamp tunnel simultaneously hardens the varnish on the surface of wood, glass, etc. The machine is used very little, only for tests, additionally a new rubber roller for the machine. Knjdpfx Asp Uanfeaboc