Valdeolivares

Condition: excellent (used), Year of construction: 2005, Technical specifications: Working length: 3100 mm Max. bending capacity: 20.0 mm Bending allowance: 15.0 mm CNC control: SIEMENS Simatic Diameter of all rollers: 350 mm Hydraulic folding bearing Lrjdpfx Ake Afby Rsmou Control panel with digital display Motor power: 15 kW CE marking Dimensions (length x width x height): approx. 6900 x 2000 x 2450 mm Weight: approx. 21 tons Accessories: Bending aid at the top and on the side The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2017, Technical specifications: 2 rollers hydraulically adjustable 3 rollers driven Shaft diameter: 80 mm Lateral, hydraulically controlled arm correctors on the left and right CE marking Bending capacity, square bar: 60 x 60 x 3 mm Bending capacity, flat bar: 100 x 20 mm Bending capacity, tube: 88.9 x 4 mm Bending capacity, angle: 70 x 70 x 8 mm Round bar: 40 mm Lrjdpfxo Afby De Akmeu Motor power: 4.75 kW Control panel with digital display Dimensions (length x width x height): approx. 1650 x 1450 x 1550 mm Weight: approx. 1.6 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 2018, Technical data: Travel ranges (X/Y): 300 / 200 mm Travel range (Z): 350 mm Lrodpfx Aj Afbykjkmsu Diagonal travel range (W): 200 mm Table size: 350 x 250 mm Max. workpiece height: 180 mm Max. workpiece weight: 150 kg Electrode diameter: 0.2 – 3.0 mm Dimensions (length x width x height): approx. 1100 x 1100 x 2000 mm Machine weight: approx. 0.6 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2001, 1,000 shots used injection molding machine with robot, safety fence, and conveyor belt Manufacturer: DEMAG Type: ERGOTECH100/420-430System Year of manufacture: 2001 Clamping force: 100 tons Tie bar distance: 400 x 400 mm Screw diameter: 35 mm Max. injection volume: 168 cm³ Shot weight: 150 g/shot Control system: NC4 Equipment: - Robot, Engel, Type: W711-0174, Year of manufacture: 2009 - Safety fence Lredpfx Akj Afbx Temsu - Conveyor belt - 2 x core pull - Blow valve

Condition: refurbished (used), Year of construction: 2020, operating hours: 10,326 h, load capacity: 1,400 kg, lifting height: 9,410 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,670 mm, battery voltage: 48 V, empty load weight: 2,750 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN ACTION. Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including drive, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. Made in Germany – with responsibility and precision. Strict technical inspection. 400+ vehicles available. Worldwide transport & customs clearance. Service & spare parts at fair prices. Personal support – even after the purchase. Test and get advice on-site now – we will find the right solution for you. Reach truck data: • Manufacturer: Jungheinrich • Type: Reach truck ETV 214 • Drive type: Electric • Load capacity: 1,400 kg • Year of manufacture: 2020 • Operating hours: 10,326 • Lifting height: 9,410 mm Lrjdj Afbx Hopfx Akmeu • Mast type: Triplex • Free lift: Yes • Overall height: 3,670 mm • Unladen weight: 2,750 kg • Load center: 600 mm • Tires: Polyurethane • Model type: ETV 214 • Battery type: PzS • Voltage: 48 V • Battery weight: 1,235 kg

Condition: good (used), Year of construction: 1980, functionality: fully functional, lateral stop: 1,420 mm, cutting width (max.): 1,420 mm, Bobst SP 142 ER from 1980 for sale – reason for sale: a replacement investment has been made. The machine can be inspected during operation. Dismantling and transport are the responsibility of the buyer. Lrsde Afbxmepfx Akmsu

Condition: used, power: 90 kW (122.37 HP), nominal power: 90 kW (122.37 HP), rotational speed (min.): 1,480 rpm, rotational speed (max.): 1,480 rpm, input voltage: 400 V, input frequency: 50 Hz, input current: 156 A, type of input current: three-phase, overall weight: 692 kg, total length: 1,035 mm, total width: 557 mm, total height: 695 mm, torque: 580 Nm, type of cooling: air, protection type (IP code): IP55, No. 10040 Three-phase motor Simotop / Techtop T3CR 280M-4 / 90 kW / 1480 rpm Unused, in new condition According to our customer / the previous owner, the machine is fully functional and can be viewed on site Three-phase asynchronous motor Output 90 kW at 50 Hz 4-pole, speed 1480 rpm Voltage Δ/Y 380/660 V or 420/720 V at 50 Hz Rated current 156.1/89.9 A or 141.3/82.4 A Power factor cos φ 0.92 Rated torque approx. 580 Nm Can be operated in delta on a 400 V supply, therefore suitable for star-delta starting Also suitable for 60 Hz 90 kW at 400/690 V and 1770 rpm 108 kW at 480/830 V and 1780 rpm Efficiency class IE3, efficiency 95.2% Protection class IP55 Insulation class F Duty type S1 continuous operation Cooling method IC411, totally enclosed fan-cooled (TEFC) PTC thermistors for winding protection IEC standard motor, frame size 280M, shaft height 280 mm Mounting type IM B3, foot-mounted with bolted-on feet Foot hole spacing 457 x 419 mm, 4 holes Ø 24 mm Shaft end Ø 75 x 140 mm with 20 mm key Grey cast iron housing, colour RAL 7024 graphite grey Ball bearings SKF 6316 ZZ C3 on both ends Terminal box on top, cable entries 2x M50x1.5 and 1x M16x1.5 Lede Afbxgepfx Akmeru Motor dimensions approx. 1035 x 557 x 695 mm LWH Transport dimensions approx. 1200 x 800 x 900 mm LWH Weight approx. 692 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: new, Year of construction: 2026, operating hours: 40 h, functionality: fully functional, machine/vehicle number: Technofold, infeed width: 1,200 mm, Offer for the Technofold 1200 SL with Gyro Ljbmsw Ec D Ao S Ngtheru Specifications: Machine speed: 400 m/min Creel speed: 20 m/min Packaging width: 160-1200 mm Machine dimensions: 22x1.88x1.5 m Machine weight: 9.2 t Max power consumption: 26 kW Lsdpo Afbw Nofx Akmsru Air demand: 6 bar / max 10 m3/h Machine equipment: 4-6 point machine Gyro – rotating packages by 90 degrees Side alignment section – left/right Pre-creasing section Automatic bottom section Servomotors, 4/6-point rear bending system Lower circular glue applicator – left/right KQ cold glue system with 4 applicators Final crimping and closing section Distribution section Ironing section with independent drive Pneumatic insertion rollers with SQUARING 2 alignment Tapping block – SPANKER Vacuum on the feeder + vibrator Camera with monitor on display

Condition: reconditioned (used), functionality: fully functional, We are selling a Carpigiani ice cream freezer from our service center. It is in good condition and has a capacity of 45 kg per hour. It is ready for use with a new thermal bridge and a dispensing window. 380V. Ledpfx Aj Afbw Askmsru

Condition: excellent (used), Year of construction: 2003, 1,0 St. gebr. Spritzgießmaschine mit Roboter und Reinraumausstattung Hersteller: ENGEL Typ: VICTORY 80/25 TECH Baujahr: 2003 Schließkraft: 25 Tonnen Ljdpfx Aks Afbwpsmjru Holmabstand: HOLMLOS Schnecken DN: 18 mm Max. Hubvolumen: 20 ccm³ Spritzteilgewicht 18 g/PS Steuerung: CC200 Ausstattung: Roboter, Engel, Typ: ERC Reinraumkabine -1 x Kernzug -Ausblasventil

Condition: excellent (used), Year of construction: 2010, operating hours: 25,540 h, 1 used 5-axis machining center DECKEL MAHO DMU 50 with SIEMENS control Siegfried Volz Werkzeugmaschinen Ljdpfx Akj Afbv Somjru Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), 1 unit, used. Cutting mill including dust extraction system. Lsdpfo Afbvxex Akmoru Manufacturer: DREHER Year of manufacture: 1998 Type: S34/52 GFS Special Infeed size: 375 mm x 370 mm Rotor diameter: 340 mm Motor power: 22 kW

Condition: good (used), functionality: fully functional, PYE 100 S/1M hydraulic press Lrjds Afbvlspfx Akmou

Condition: good (used), functionality: fully functional, Eccentric press LEN 40C. Lsdpfs Afbvfjx Akmeru

Condition: excellent (used), Nagel Auto-Rillnak automatic scoring machine Maximum format: 330 x 630 mm Minimum format: 210 x 140 mm Paper weight: 70 - 300 gsm Lsdpfo Afbu Usx Akmjru Maximum number of scores: 12 Weight: 120 kg Power supply: 220/240V Very good condition, machine ready for operation Suitable for use in bookbinding and digital printing. Used for preparing sheets for folding leaflets, covers, invitations, cards, folders, and other promotional materials. A solution for jobs requiring aesthetically pleasing and uniform paper creasing.

Condition: used, Year of construction: 2013, operating hours: 5,800 h, fuel type: diesel, output current: 361 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power (apparent): 250 kVA, motor manufacturer: Volvo Penta, No. 10038 Diesel generator set Stiegele / Volvo Penta 250 kVA Used, year of construction 2013, approx. 5800 operating hours According to our customer / the previous owner, the machine is fully functional and can be viewed and tested on site Rated output 250 kVA / 200 kW at power factor cos φ 0.8 Voltage 400 V, 3-phase, 50 Hz Rated current 361 A Speed 1500 rpm Generator duty type S1 (continuous operation) Diesel engine Volvo Penta TAD 734 GE Engine output 250 kW / 335 hp Speed 1500 rpm Alternator Mecc Alte ECO 38-1LN/4 Insulation class H Protection rating IP21 Control system ComAp InteliGen NT Circuit breaker ABB SACE Tmax Emergency stop switch Battery isolator switch Electric starter with starting batteries Soundproof enclosure with large service doors on both sides Base frame with integrated fuel tank Weight approx. 4500 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Lsdpfx Aj Afbuuokmeru Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: excellent (used), The set includes a Duplo gathering machine with a DSF-2000 feeder, a DBM-500 booklet-making module, and a 500T trimmer. Lrjdpj Afbunsfx Akmeu The machine has been serviced, is in fully working condition, and ready for production. Configuration: DSF-2000 – sheet feeder, mileage: approx. 40,000 DBM-500 – saddle-stitch and folding module, mileage: approx. 350,000 Trimmer 500T – trimming machine, mileage: approx. 315,000 The set enables automatic sheet gathering, wire-stitching of booklets, folding, and trimming. It is suitable for the production of promotional brochures, catalogs, instruction manuals, notebooks, training materials, and other multi-page publications. Selected technical parameters: DSF-2000: sheet format from 148 × 200 to 320 × 450 mm. DBM-500: sheet format from 120 × 170 to 350 × 500 mm.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 1,600 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 12 mm, height adjustment type: electric, Equipment: CE marking, documentation/manual, SCM Group -STEFANI: 4-sided edgebander complete machine line (2x double-sided edgebanders with vacuum loading, turning unit, drilling and vacuum unloading,) 1. SCG - Vacuum feeder with roller conveyor 2. STEFANI Evolution SSB - double-sided edgebander Lrjds Afbuhjpfx Akmsu 3. MAHROS - part turning unit (turning parts by 90°) 4. STEFANI Evolution SSB - double-sided edgebander 5. BIESSE - drilling machine 6. SCG - Vacuum unloading with roller conveyor + including 4x NORDSON units for PUR glue application -All parts/units were made in Italy. -During the operation the machine line was used only with EVA type of glue. The PUR gluing units have not been used and they are in a brand new condition - applicators on the machine and the 4 NORDSON units. -Please, find the technical parameters in the PDF bellow.

Condition: used, functionality: fully functional, For sale is a high-quality linear measuring system consisting of a Heidenhain MT101M measuring probe and an ND221 display unit. Ideal for precise measurements in mechanical engineering, manufacturing, or testing. Highlights: * High-precision measuring probe MT101M * Digital display unit ND221 – easy to read * Robust industrial quality from Heidenhain * Perfect for length and comparative measurements * Ready for immediate use Condition: Used, but in very good condition. Fully functional. Normal signs of wear and tear (see pictures). Scope of delivery: * Heidenhain MT101M measuring probe * ND221 display unit * Connecting cable * Measuring table (choice between a large and a small measuring table) Lredpfe Afbubsx Akmsu

Condition: good (used), functionality: limited functionality, Performance: 30 to [units – please specify units, e.g., kg, N] Single stroke operation only, without protective shield Stroke rate: 20 – 30 strokes/min, adjustable in single stroke mode, continuously variable Outreach: 220 mm Plunger stroke: 8 - 100 mm Ledpfxs Afbt Rj Akmsru Plunger adjustment: 60 mm Table size approx.: 580 x 460 mm Installation height approx.: 340 mm Protective shield is non-functional; operation only in single stroke mode via foot switch.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,020 mm, saw blade diameter: 500 mm, total length: 6,100 mm, type of input current: three-phase, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, overall weight: 1,600 kg, The machine is currently undergoing refurbishment; further photos will follow. Classic Magic 500 TU5 -Double miter saw with program/positioning control -Electrically adjustable saw head, speed V = 20 m/min -Saw blade diameter 500 mm -Saw blade bore 32 mm -Max. cutting length 5,200 mm; automatic extension up to 10,000 mm possible for oversized parts -Min. cutting length at 90° = 225 mm -Horizontal pivoting of the saw heads -Miter angle range from 90° to 22.5° (outward) -Saw heads with automatically controlled full protective guards -Profile support roller track (right) -Pneumatic material/workpiece clamping The machine comes with the following accessories: -Cleverbridge for data transfer via USB or RJ45 -Long roller track -Additional tensioner on the roller track -Horizontal + Vertical tensioners -Macro function (ideal for mosquito screen manufacturers) -Oversized part cutting -Shortcut function -Cross-cutting -Automatic cutting Lrsdpfxo Afbtws Akmsu -Automatically extending profile support

Condition: good (used), functionality: fully functional, Year of construction: 2017, overall weight: 16,000 kg, maximum load weight: 13,140 kg, empty load weight: 2,860 kg, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,520 mm, GERMAN DEALER offers: Krone BDF swap body Year of manufacture: 11 / 2017 Lsdpo Afbtqefx Akmsru 16,000 kg GVW 2,860 kg unladen Craneable Double mountings Rear doors Telescopic support legs Interior: 7300x2480x2520 mm Labelling is only foil Many swap bodies and carrier trailers in stock! ##### PLEASE CALL – NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES – SUPPLYING SINCE 1983! VIEWING BY APPOINTMENT ONLY! #####

Condition: used, empty load weight: 3,155 kg, maximum load weight: 14,845 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2014, next inspection (TÜV): 09/2026, loading space length: 7,820 mm, suspension: air, tire size: 235/75R17,5, Equipment: ABS, GERMAN DEALER offers: Jumbo tandem trailer Galvanized 235/75R17.5 Twin tires BPW axles Drum brakes Spare wheel 3 storage boxes We have many trailers and interchangeable platforms in stock! ##### PLEASE CALL - NO EMAILS! ##### Lredpfx Ako Afbtkjmou DELIVERY THROUGHOUT GERMANY IS POSSIBLE! MEPO COMMERCIAL VEHICLES HAS BEEN PROVIDING VEHICLES SINCE 1983! VIEWING BY APPOINTMENT ONLY! #####

Condition: used, empty load weight: 2,000 kg, maximum load weight: 14,000 kg, overall weight: 16,000 kg, first registration: 07/2014, total length: 7,700 mm, total width: 2,460 mm, Year of construction: 2014, GERMAN DEALER offers: BDF 7.82m construction material platform flat, 150mm frame vertical hole strip end wall 2900mm telescopic support legs suitable for crane loading 16,000 kg gross vehicle weight 2,000 kg tare weight year of manufacture 07/2014 7700 mm x 2460 mm multiple units available many interchangeable bodies and trailers in stock! Ljdpfx Ao Afbtdskmeru ##### PLEASE CALL – NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES HAS BEEN SUPPLYING SINCE 1983! VIEWING ONLY BY APPOINTMENT! #####

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours: 3,560 h, overall weight: 1,850 kg, Phantomatic T 3 Star >The machine is currently undergoing refurbishment; further photos will follow.< The machine has the following options: Ledpfx Ae Afbrtekmjru > Software CamPlus / Job > Remote control MG Pilot > 8-tool automatic tool changer > Automatic clamp positioning > Enclosed housing > 2 barriers (for multi-piece machining and overlength machining) > 4-sided machining