Ridder Holding B.V.

Condition: good (used), Gear Hobbing Machine Strausak 30 Workpiece diameter for manual loading: Ø 35 mm Workpiece diameter for magazine loading: Ø 15 mm Workpiece diameter for fully automatic loading: Ø 10–12 mm Maximum hobbing length: 12 mm Plunge feed at 42% of longitudinal feed: 22 mm Dsdox Dxu Sspfx Addocr Plunge feed at 25% of longitudinal feed: 14 mm Module in steel max.: 1.0 mm Module in non-ferrous metals max.: Solid material ø26 / ø35 mm Selectable number of teeth: 5–390 Cutter speeds: 1160–8550 rpm Plunge feeds per workpiece revolution: 0.0325–0.273 mm Longitudinal feeds per workpiece revolution: 0.033–0.65 mm Cutter diameter: 8–24 mm Machine weight: 600 kg Main motor: 0.8 HP at 3000 rpm Hydraulic motor: 0.25 HP at 1500 rpm Coolant motor: 0.25 HP at 1500 rpm No guarantee is given for the accuracy, completeness or timeliness of the information provided.

Year of construction: 1986, condition: ready for operation (used), Offered is a Kesel rack milling machine L79/2100 milling head F55 year 1986. Milling travels X/Y/Z: max. 2100mm/250mm/370mm, workpiece width: 280mm, milling head: swivel: +/-30°, stepless speed: 0-210rpm, drive power: 18.5kW, max. module 12, max. cutter diameter: 250mm. Milling feed: 10-350mm/min, rapid return: 5000mm/min, table feed max.: 3000mm/min, Heidenhain TNC151, machine weight: approx. 4700kg. An inspection is possible by arrangement. Djdpfx Adox Auqaodjcr

Year of construction: 2015, condition: excellent (used), Polygon and surface machining, gear and spline shaft machining, gear tooth pointing, shift stop machining, chamfering and deburring, SCUDDING See document Dodpfx Adexupg Tedjcr

Year of construction: 2014, condition: used, inclination 0,5 - 6,3 ° speed 700 m/min stroke 100 mm max. diameter 270 mm pitch angle +/- 45 ° Cutter Spindle Diameter 68,23 mm table height over floor 930 mm Dcodpsxukrwefx Adder weight of the machine ca. 3 t dimensions of the machine ca. 1,35 x 1,75 x 2,2 m

Year of construction: 2025, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 3649, Country of manufacture: Switzerland Voltage: 380 V / 50 Hz / 3 Phases Net weight: approx. 445 kg Dimensions: 730 x 780 x 1380 mm Customs tariff number: 8459.6130 TECHNICAL SPECIFICATIONS Maximum distance between stops: 80 mm Maximum cutting length: 50 mm Maximum cutting diameter (with 24 mm dia. cutter): 36 mm Maximum module: 1 Number of teeth cut – with 1:4 ratio: 6-100 with 1:10 ratio: 6-200 Total rapid approach and plunge travel: 8 mm Maximum axial movement travel of the cutter: 10 mm Maximum plunge cutting travel: 2.5 mm Maximum movement of counter-spindle quill: 25 mm Dsdpfx Adow Uc Tbedocr Maximum distance between workpiece axis and cutter axis: 30 mm Maximum cutter diameter: 32 mm Quill body diameter: 35 mm Continuously adjustable slide feed rate: 0-60 mm/min Constant rapid return feed rate of the slide: 3 m/min 8 spindle speeds: 660–5300 rpm Horizontal tilt of the cutter head: approx. 4° Cutter motor power (2 speeds): 0.37/0.59 kW Hydraulic pump motor power: 0.24 kW Coolant pump motor power: 0.07 kW Hydraulic oil tank capacity: 13 l Cutting oil tank capacity: 10 l Quill oil tank capacity: 10 l All technical data provided without guarantee and subject to errors or omissions.

Condition: ready for operation (used), Five older thread milling machines Mikron are available, 3x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible. Dcodpfx Aew Sxyxjddjr

Year of construction: 2007, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor Dcsdpfew Rf S Eox Addsr - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation

Year of construction: 2009, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: Dedpjw Rf R Uefx Addecr - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation

Condition: good (used), Year of construction: 1979, machine/vehicle number: 1137.05, Used tool grinding machine Manufacturer: KAPP Dcjdpfxswzk R Ns Addjr Model: AST305B Year of manufacture: 1979 Serial number: 1137.05 With accessories

Condition: used, Technical details: z-travel: 1250 mm swing diameter over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm center height over bed: 260 mm hobbing length: 2000 mm module max. : 8 / 12 total power requirement: 9,5 kW Dsdpev U Un Hjfx Addocr weight of the machine ca.: 3,8 t

Condition: used, Technical details: Dodpfev U T Dyox Addscr center height over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm hobbing length: 2000 mm number of teeth: 2 - 50 feed:: 0,023 - 5,17 / mm/min module max. : 8 / 12 spindle bore diameter: 102 mm workpiece rpm : 18 - 224 U/min tailstock quill adjustment: 100 mm total power requirement: 9,5 kW weight of the machine ca.: 5,2 t dimension machine xH: 3,6 x 2,1 x 2,0 m

Year of construction: 1999, condition: ready for operation (used), Module size: 5mm, max. workpiece diameter: 180mm, axial travel: 400mm, shank travel: 200mm, milling cutter diameter: 150mm, tool speed: 2250rpm, table speed: 250rpm, max. tool clamping length for bore milling cutter/end milling cutter: 236mm/360mm, control: Liebherr PC-NC. Documentation available. On-site inspection is possible. Dcedpfx Aovpviuoddjr