Tms

Condition: good (used), Year of construction: 2003, Arburg 570C 2000-150/60 2-component injection molding machine Year of manufacture: 07/2003 Gksdj Akcz Uspfx Adked Operating hours: 52,000 Includes Wittmann W731 from 2008, as well as safety enclosure as shown in the image.

Condition: used, Year of construction: 2011, operating hours: 35,200 h, clamping force: 250 kN, displacement volume: 664 cm³, injection pressure: 2,000 bar, overall weight: 12,500 kg, screw conveyor diameter: 60 mm, terms of delivery: FCA Pegnitz delivery time: on request Gjdpfxj Ai Uaus Adkskd terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 2003, operating hours: 48,500 h, clamping force: 2,000 kN, Hydraulic injection moulding machine manufactured in 2003. This Krauss Maffei KM 200-1000 C2 features a fully hydraulic 2-platen clamping system and a complete thermoplastic plasticizing unit. It includes a robust screw diameter of 55 mm and an advanced MC4 32-bit microprocessor control system. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 200-1000 C2 machine we have for sale. Contact us for further details. Gjdpfx Ads Ai Spzjkskd • Clamping System: Fully hydraulic 2-platen clamping system • Operating Hours (Pump/Machine): 48,465 h • Operating Hours (Automatic/Cycle): 42,286 h • Regulation: PV-control for injection speed, holding pressure, and back pressure • Plasticizing Unit: Complete thermoplastic plasticizing unit in wear-resistant execution (abrasion and corrosion protection for injection units Sp 90 with Sp 3500) • Screw Diameter: 55 mm • Nozzle: Open nozzle (nozzle radius 10.00 mm, nozzle bore 4.00 mm) + mechanically controlled shut-off nozzle SVN (make: Bernex, Herzog system) • Non-Return Valve & Drive: Hydraulic screw non-return lock (04.01) and hydraulic screw drive with standard speed (07.20) • Operating Voltage: 3-Phase ~ 400 V / 230 V (Euro voltage with neutral conductor) • Frequency: 50 Hz • Total Nominal Current (IN - Gesamt): 154 A • Motor Current (I - Motor): 72 A • Pre-fuse (Vorsicherung): 160 A • Pump Motors: Insulation class F

Condition: ready for operation (used), Year of construction: 2018, operating hours: 19,428 h, clamping force: 1,500 kN, Electrical injection moulding machine manufactured in 2018. This Arburg ARBURG 520 E 1500-290 features a clamping force of 1500 kN and an injection unit size of 290. It includes a highly wear-resistant thermoplastic cylinder with a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ARBURG 520 E 1500-290 machine we have for sale. Contact us for further details. 2 Machines available- Clamping Force / Injection Unit Size: 1500 kN / Injection unit size 290- Operating Hours (Pump): 24,234 h (as of 05.11.2026)- Operating Hours (Automatic): 20,965 h (as of 05.11.2026)- Operating Hours (Semi-Automatic): 0 h- Total Machine Cycles: 3,080,783- Screw Diameter: 30 mm (Highly wear-resistant thermoplastic cylinder, CrN coated screw and non-return valve, mixing section)- Non-Return Valve: Extended bushing and shortened stroke- Drive / Hydraulic System: axw Control ScrewPilot via servoelectric direct drive, 15.5 kW small accumulator hydraulics with 11.2 l/min charging flow rate- Control Unit: Selogica direct- Clamping Platen Centring: Central Ø 125 mm, continuous groove in fixed platen (Y-axis: 6 mm deep, 22 mm wide + 0.02 mm), M12 Euromap mounting holes- Core Pulls: 2 core pulls, simultaneous motion P/Q controlled, programmable; Core pull 2 extended to fixed platen; max flow rate 100 l/min- Ejection System: Electromechanical ejector, synchronised with mould opening, ejector quick-release coupling, ejector plate safety connection- Nozzle: Open nozzle 30 mm, tip with R 19 mm, programmable controlled nozzle contact force- Mold Height Adjustment: Servoelectric mould height adjustment with automatic clamping force regulation- Temperature Control / Heating: 12 electrical heating control circuits for mould heating (Harting HAN 24E special assignment); 1 additional heating control circuit for nozzle/adapter; mould temperature control interface 20 mA with connection cable for HB-THERM; temperature circuits up to max. 100 °C with flow measurement- Pneumatics & Valves: Pneumatic service unit with 3 pressure reducers (3x 1000 l/min); blow-off unit 1 with 3/2 valve on fixed platen; electric and pneumatic actuation NVD1 in mould- Interfaces: Robot system interface per EUROMAP 67 (50-pin) & EUROMAP 12 (F9264); safety gate door protection interface (EUROMAP 73); ALS (OPC-UA) ARBURG host computer interface; CF-card data storage; EUROMAP 65 chip card operator authorization; dosing / coloring unit interface; external conveyor belt control interface; container changer device interface; serial/USB printer interface; Mobile SELOGICA AMS connection- Socket Distribution: Front operator side with 1 CEE, 1 Schuko; special distribution at rear end of machine base with 2x CEE 16A, 1x 32A, 3x Schuko 10A- Lighting & Signaling: Waldmann MCXFL 3S LED machine light in mould installation space (automatic on/off with safety gate); acoustic and flashing light fault indicatorsIncluding Peripheral Equipment:- X-Axis (Horizontal Beam Traverse): Stroke: 2,500 mm; Drive: Brushless servomotor; Linear instantaneous speed: 4.00 m/s; Position accuracy: ±0.5 mm; Repeatability: ±0.1 mm- Y-Axis (Demoulding Stroke): Stroke: 700 mm; Drive: Brushless servomotor; Linear instantaneous speed: 3.00 m/s; Position accuracy: ±0.5 mm; Repeatability: ±0.1 mm- Z-Axis (Vertical Stroke): Stroke: 1,400 mm; Drive: Brushless servomotor; Linear instantaneous speed: 4.00 m/s; Position accuracy: ±0.5 mm; Repeatability: ±0. Gjdpj Ai Skkefx Adkekd

Condition: ready for operation (used), Year of construction: 2006, operating hours: 29,156 h, functionality: fully functional, machine/vehicle number: 202385, clamping force: 1,000 kN, injection pressure: 2,500 bar, ejector force: 40,000 N, ejector stroke: 175 mm, plate length: 570 mm, plate height: 570 mm, total length: 4,301 mm, total width: 1,592 mm, total height: 2,069 mm, overall weight: 3,650 kg, Used ARBURG ALLROUNDER 420 C GOLDEN EDITION injection moulding machine, manufactured in Germany in October 2006. Gsds Ai R Nuopfx Adkokd The GOLDEN EDITION belongs to ARBURG's established range of hydraulic injection moulding machines, designed for reliable and precise processing of thermoplastic materials. A versatile 100-tonne machine suitable for manufacturing technical plastic components and a wide range of injection-moulded products. Transport belt included.

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Godpfo Ai Elwsx Adkjkd Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Gksdps Ai Eldefx Adkod Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: good (used), Year of construction: 2006, operating hours: 65,700 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, overall weight: 10,500 kg, Equipment: documentation/manual, Nitrogen injection, Gksdpfx Ae Airirsdksd 2 cores, 4 tool heating zones.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 30 mm, overall weight: 10,000 kg, warehouse no.: 503724 manufacturer: Wittmann Battenfeld type: Vpower 120-350 R1300 controller: Unilog B8 Gkedpfx Ao Aiq Enedksd year of construction: 2021 clamping force: 1200 kN distance between tie-bars h x v: 1160 x mm size of mould plates h x v: 740 x 580 mm min. mould height: 250 mm max. open daylight: 600 mm opening stroke: 350 mm round table diameter: 1300 mm screw diameter: 30 mm swept volume: 106 ccm injection pressure: 2835 bar An additional plasticizing unit is also available for changing with the following technical specifications: Screw diameter: 18 mm Stroke volume: 22.9 ccm Specific injection pressure: 3000 bar measures of machine l x w x h: 4.4m x 2.09m x 3.8m total weight: 10000KG equipment included screen text german core pulling pneum. 2 x injection unit extremely wear resistant and corrosion resistant interface EUROMAP 63 interface OPC

Condition: used, Year of construction: 2007, This KRAUSS MAFFEI injection molding machine, KM650-2700 C2, will be auctioned off online in our industrial auction / machinery auction, Aumovio Germany GmbH - Step 2 - injection molding machines, temperature control units, storage racks and various other items. You can find this and many other items on our platform. Gsdpj Aiqpyofx Adkokd

Condition: used, Year of construction: 2001, This KRAUSS MAFFEI injection molding machine, model KM 420-2700 C2, will be auctioned online as part of our industrial auction / machinery auction hosted by Aumovio Germany GmbH - Step 2 - Injection molding machines, temperature control units, storage racks, and various other items. You can find this and many other items on our platform. Gksdpfx Ade Aiqn Aeksd

Condition: used, Year of construction: 2000, This KRAUSS MAFFEI injection molding machine, KM 500-2700 C2, will be auctioned online as part of our industrial auction / machinery auction, Aumovio Germany GmbH - Step 2 - Injection molding machines, temperature control units, storage racks, and various other items. Gkedpe Aiqnqjfx Adkod You can find this and many other items on our platform.

Condition: used, Year of construction: 2001, This KRAUSS MAFFEI injection molding machine, model KM 125-390 C2, will be auctioned off online in our industrial auction / machinery auction, Aumovio Germany GmbH - Step 2 - Injection molding machines, temperature control units, storage racks, and various other items. Gkeds Aiqlvepfx Adkod You can find this and many other items on our platform.

Condition: used, Year of construction: 1999, functionality: fully functional, Injection molding machine KraussMaffei KM 800-5700 MC – Year of manufacture: 1999 Technical data: Manufacturer: KraussMaffei Model: KM 800-5700 MC Year of manufacture: 1999 Clamping force: 8,000 kN (800 t) Screw diameter: 105 mm Operating hours: approx. 82,540 h 4 core pulls 1 air valve AS Tool mounting height: min. 600 mm, max. 1,100 mm Gjdpfx Ado Aif E Iskokd Closing stroke: 1,400 mm Platen size: 1,300 × 1,300 mm Tie bar spacing horizontal: 1,120 mm Tie bar spacing vertical: 1,000 mm Centering ring: 250 mm 8 water circuits each Equipment: Conveyor belt Enclosure Handling system Condition: The machine is functional and can be tested. In 2025, the machine was inspected by KraussMaffei, and the pump connections were resealed. Location: Thuringia, Germany _____ Subject to prior sale and errors in technical specifications. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: used, Year of construction: 1998, functionality: not functional, machine/vehicle number: 154322, clamping force: 1,500 kN, overall weight: 7,100 kg, Overall machine condition is good. Machine was working in production until plant operations were stopped. Gkodpo Aid Nhofx Adkod Machine was stored into a warehouse in 2024. Since then it has not been in use. Machine is not connected to power outlet, battery from the electronic plate has drained. Therefore some data is missing from the machine. Machine powers up, but it is not functional at this moment. Location - Estonia, Hiiumaa.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 64977, total length: 4,000 mm, total width: 1,000 mm, total height: 1,900 mm, overall weight: 3,200 kg, Equipment: documentation/manual, Our KraussMaffei plastic processing machine is for sale. If you are intrested send an e-mail for me with your quetions. Gkedpfx As Ah Sm Hodkjd Thank you.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, overall weight: 8,000 kg, Equipment: documentation/manual, We offer a ready-to-use Arburg ALLROUNDER 520 C 2000-675 injection molding machine, manufactured in 1996. Manufacturer: Arburg Model: ALLROUNDER 520 C 2000-675 Year of manufacture: 1996 Condition: Ready for operation Godj Ah Rrwopfx Adkjkd Machine type: Injection molding machine If you have any questions or require further information, please send us a message or contact us by phone. The machine is sold without warranty.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, clamping force: 300 kN, screw diameter: 60 mm, clearance between the columns: 630 mm, injection pressure: 2,000 bar, injection weight: 618 g, overall weight: 14,700 kg, | Locking mechanism | Hydraulic | | Tool height min. [mm] | 330 | | Maximum tool opening stroke [mm] | 1150 | | Permissible tool diameter min., horizontal × vertical [mm] | 441 | | Maximum tool weight [kg] | 3430 | | Distance between columns, horizontal [mm] | 630 | | Distance between columns, vertical [mm] | 630 | | Dimensions of clamping plates, horizontal × vertical [mm] | 995 × 1050 | | Centering flange diameter, side A [mm] | 120 | | Centering flange diameter, side B [mm] | 160 | | Thread in the clamping plate of the injection molding machine | M20 | | Maximum ejector stroke [mm] | 200 | | Maximum ejector pin on the tool [mm] | 450 | | Thread in the ejector plate of the injection molding machine | M20 | | Ejector force [kN] | Forward 58 / reverse 28 | | Tool opening force [kN] | 160 | | Tool clamping force according to Plaston standard | 5990 | Wittmann robot: Gkedpfx As Ah Rmgsdkod W 621-0977 Year of manufacture 2003

Condition: excellent (used), functionality: fully functional, overall weight: 15,000 kg, Year of manufacture: 2020 Manufacturer: Sodick Gede Ah Rk Eopfx Adkjkd Machine model: AG60L Machine type: Wire EDM machine / Sink EDM Control system / Operation: LN2 CNC control, 15" touchscreen 200 V, 3 phases, 50/60 Hz, 10 kVA Rated current / RMS sym. Amps: 29 A / 50 A Operating hours: 3600 erosion hours

Condition: good (used), Year of construction: 1997, Arburg 520 V-2000-675/150 Clamping force: 200 tons Year of manufacture: 1997 Gkjdpfx Aj Ah Iuuedked Screw diameter: 50 mm + 35 mm Mold spacing: 52 x 52

Condition: excellent (used), Year of construction: 2013, WITTMANN BATTENFELD MACRO POWER E450/2250 INJECTION MOLDING MACHINE Manufacturer: Wittmann Battenfeld GmbH, Austria Model: MacroPower E450/2250 Year of Manufacture: 2013 Godj Ah Hkhjpfx Adkjkd Control System: UNILOG B6 Type: Hybrid, horizontal injection molding machine Machine Number: 134481-100 Operating Hours: 76,623.41 h 1. CLAMPING UNIT Clamping Force: 4500 kN / 450 tons Tie Bar Spacing (H × V): 950 × 700 mm Minimum Mold Height: 330 mm Maximum Mold Height: 780 mm Electric Ejector System Ejector Force: 60 kN Ejector Stroke: 180 mm 2. INJECTION UNIT Screw Diameter: 65 mm Maximum Injection Weight: 980.9 g Maximum Injection Pressure: 2070 bar Maximum Injection Speed: 400 mm/s Servo-electric Drive for the Injection Unit Knödler Drive Screw with Check Valve 3. DRIVE AND CONTROL Hybrid Drive UNILOG B6 Control System Servo S0 Package ServoPower S1 Package – hydraulic pump speed control Integrated Filtration System Control System in Polish Operating Hour Counter: 76,623.41 h 4. ADDITIONAL EQUIPMENT Compressed Air Valve Cooling Water Flow Regulator Digital Interface for Controlling up to Six Thermoregulators Interface for Controlling Valve Pins in the Mold Interface for External Hot Runner Controller Integration with Wittmann W8xx Series Robots Quality Control Button Electric Ejector Integrated Hydraulic Filtration System

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, functionality: fully functional, clamping force: 132 kN, screw diameter: 135 mm, injection pressure: 1,390 bar, injection weight: 7,729 g, KraussMaffei KM 1300-12000 MX + KUKA Robot! TECHNICAL DETAILS Clamping Unit Clamping force: 1,300 t Opening stroke / mounting height: max. 2,300 mm Distance between tie bars: max. 4,000 mm Mold mounting height: min. 1,000 mm / max. 1,700 mm Tie bar height: max. 1,910 mm Mold size: min. 1,000–1,700 mm Clear tie bar spacing: 1,500 mm Nozzle radius: R40 mm Mold weight: 29,000 kg Ejector stroke: 350 mm Gkodpfx Ao Ah D Dyjdkod Injection Unit Screw diameter: 135 mm Displacement volume: 8,588 cm³ Injection pressure: 1,390 bar Shot weight: 7,729 g PS MACHINE DETAILS Core pulls, ejector side / nozzle side: 1 / 1 Pneumatic needle closures: 1 Operating hours: 81,000 h EQUIPMENT KUKA robot

Condition: good (used), Year of construction: 2011, _Technical specifications:_ • Clamping force: 420 tons (4,200 kN) • Injection unit: 3440 • Screw diameter: 80 mm Gedj Ah Dvkopfx Adkekd • Screw L/D ratio: 25 • Maximum injection speed: 300 mm/s • Maximum screw speed: 280/240 rpm • Ejector force: 120 kN (boost 180 kN) • Reinforced clamping drive • Dry cycle time:

Condition: excellent (used), Year of construction: 2015, operating hours: 54,244 h, machine/vehicle number: 231099, clamping force: 2,200 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, injection weight: 359 g, mold height (min.): 350 mm, ejector force: 70,000 N, ejector stroke: 200 mm, MACHINE WITH DOCUMENTED PURCHASE EVALUATION I offer a used Arburg Allrounder 570 S 2200-800, manufactured in 03/2015, with Multilift Select and protective enclosure. The redacted purchase evaluation documents the seller's information regarding technology, condition, maintenance, and equipment. TECHNICAL DATA Clamping force: 2,200 kN / 220 t Control system: Selogica Injection unit: 800 Screw: 50 mm Shot weight: 359 g PS according to seller's form Tie bar spacing: 570 x 570 mm Platen dimensions: 790 x 790 mm Minimum mold height: 350 mm Opening: 1,000 mm according to seller's form Ejection stroke / force: 200 mm / 70 kN Pump operating hours: 54,244 h Automatic operating hours: 48,230 h Operating hours according to control system photo dated 04.11.2026 Machine number: 231099 Total connection according to nameplate: 105 kW; 400 V, 3 ~, 50 Hz HANDLING AND EQUIPMENT Multilift Select transverse, 15 kg load capacity, No. 605572 X/Y/Z: 900/1,000/1,600 mm X-axis synchronized with ejector for precise part removal B- and C-axis pneumatic 4 x vacuum, 4 x gripper double-acting Customer-side inputs and outputs Protective enclosure 12 hot runner zones Gsdpo Ahzy Hjfx Adkekd 2 core pulls, 2 blow functions Interfaces for temperature control unit and dryer Controlled pump, IE2 according to seller CONDITION AND AVAILABILITY Regularly maintained; last maintenance according to seller, internally in September 2026. No known defects or outstanding repairs are stated in the seller's form. The purchase evaluation is a documented seller's statement. Available according to the seller's form from the beginning of 2027. Price on request. I would be happy to discuss inspection, delivery, and payment terms with you personally.

Condition: used, Year of construction: 2007, operating hours: 47,205 h, functionality: fully functional, clamping force: 3,200 kN, screw diameter: 80 mm, injection pressure: 1,829 bar, overall weight: 22,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 420 V, input current: 482 A, Krauss Maffei KM 320-2700 C3 injection molding machine for sale Due to the renewal and expansion of our production capacity, we are offering our Krauss Maffei KM 320-2700 C3 injection molding machine for sale. Gsdpfx Ade Ahy D Sokokd The machine is currently fully connected and operational in our production facility. This allows potential buyers to view and test the machine in working condition, subject to serious interest. Technical specifications Manufacturer: Krauss Maffei Type: KM 320-2700 C3 Year of manufacture: 2007 Clamping force: 320 tons Injection unit: 2700 Screw diameter: 80 mm Serial number: 61009058 Machine weight: approx. 22,000 kg Total operating hours: 47,205 hours Production hours: 39,180 hours Control system: Krauss Maffei MC4 Condition of the machine The machine is complete and is currently installed in our production environment in the Netherlands. The machine is operational and connected, which allows for inspection while powered on and a demonstration of its operation. The machine is being sold due to a change/renewal of our production capacity, not because the machine is out of service. Inspection and availability The machine is located in the Netherlands/Bodegraven and is currently connected and being used for production. Inspection is possible by appointment. If there is serious interest, the machine can be demonstrated in working condition. Additional photos, technical data, and a video of the machine in operation are available upon request. Location: Netherlands/Bodegraven Condition: used, operational Availability: by arrangement