CeraCon GmbH

Year of construction: 2013, condition: used, Power: 4 kW (6 HP) Empty weight: 5.000 kg Fgedox E Sinjpfx Addsk Auction item. Furnace was bought new and used only for test. After that was left standing outside for 10 years. Sold as seen in pictures and video.

Year of construction: 2003, condition: used, Type of fuel: Electric Applicable material: Metal Auction item. Fgsdpfsx Ey Rgex Addok The polymer solution preparation unit is in working condition. sold as seen in the photos.

Year of construction: 2002, condition: used, Power: 1 kW (1 HP) Fgsdpfx Adsx Eywtedok Auction item. Vegetable packing scales are in working condition. Scales have 8 channels. Sold as seen in the photos.

Year of construction: 1972, condition: used, Applicable material: Metal Fjdpfxox Eyhro Addegk Auction item. Metal milling machine was in working condition. Not used for few years.

Year of construction: 2015, operating hours: 1,700 h, condition: used, General information Field of application: Grounds care Technical information Chassis type: rigid Empty weight: 757 kg Drivetrain Type of fuel: Diesel Drive: Wheel Make of engine: John Deere Performance Top speed: 25 km/h History Number of owners: 1 Fjdox Evm Repfx Addsgk Condition General condition: good Technical condition: good Visual appearance: good Other information Remanufactured: Yes Rental currency: EUR Additional information Please contact Sales Department for more information

Condition: ready for operation (used), load capacity: 600 kg, nominal power: 69 kW (93.81 HP), Hindenlang TPESM-600 - Induction oven Max temperature: 850° Fedpfx Adsx Enffsdogk Voltage: 400 V

Condition: ready for operation (used), load capacity: 600 kg, Hindenlang TPESM-600 - Induction oven Max temperature: 850° Voltage: 400 V Fgsdex Enflspfx Addok

Condition: ready for operation (used), empty load weight: 11,000 kg, WMW Union BFT 80/2 X: 1000 - Y: 1000 - Z: 1600mm Spindle Dia: 80 mm Fedpfx Adsx Engiedjgk Spindle bore: ISO 50 Table dimensions: 1100 x 1000 mm Table longitudinal travel (X-axis): 1000 mm Cross travel Table/colom (Y-axis): 1000 mm Height travel head (Z-axis): 1600 mm Max travel spindle: 700 mm Power on spindle: 1250 rpm Power principal motor: 8,5 kW

Condition: ready for operation (used), Andouart extruder Fjdox Engpspfx Addjgk

Condition: ready for operation (used), Automatic TECHNIPIPES Weigh bagging machine: Capacity: min: 5 kg / max: 25 kg Screw between Mixer and Bagging machine, controller in between. Supply bagging machine: 400V 50 Hz Supply controller: 220 V 50 Hz ATEX-certificated! Bagging phase : 2 steps (Raw + finishing) Vibration device to compact the product in the bag Part in contact with the product : stainless steel Aisi 304 Type of bags : valve bag Bag materials: paper / plastic Screw (auger) packer Single screw feeding unit for powder, flour, granules Fgjdox Enhtjpfx Addok Power: 5 kW weegsysteem / balance / weighing system / afzak systeem pipelines

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: BES041875, Thanks to its high impact frequency and reduced impact energy, it is primarily/ideally suited for use in track tamping or maintenance work. For driving rail spikes in wooden sleepers, driving pipes, posts, probes, and breaking concrete. Easy transport, short setup time, low emissions, low noise levels. HAPS (Hand and Arm Protection System). Fodpfjx Eb Udox Addsgk

Year of construction: 1975, condition: ready for operation (used), General Data Machine weight 20000 kg Main Drive Number of axis 3 Spindle motor power 11 kW Fedex D Dq Espfx Addogk Tool taper ISO 50 Movement X-Axis Movement 8000 mm Z-Axis Movement 1150 mm Y-Axis Movement 950 mm This 3-axis Butler CS10 Bed Type Milling Machine was manufactured in 1975. It features a large 10,000 mm table length, 1030 mm table width, and a robust ISO 50 spindle taper. The main motor power is 11 kW, ensuring heavy-duty machining capability. It also includes original Elgamill guides for precise column travel. Consider the opportunity to buy this Butler CS10 Bed Type Milling Machine. Contact us for more information about this machine. Application Types Milling

Year of construction: 2001, condition: ready for operation (used), General Data Machine weight 20000 kg Control Unit Brand HEIDENHAIN Model 426 Main Drive Number of axis 4 Spindle Speed 3000 RPM Fgsdpfjx D D Iwjx Addjk Tool taper ISO 50 Movement X-Axis Movement 3000 mm Z-Axis Movement 1500 mm Y-Axis Movement 1200 mm This 4-axis MTE BF 3200 Bed Type Milling Machine was manufactured in 2001. It features a travel range of 3000/1200/1500 mm, CNC Heidenhain 426, a manual head with 3000 rpm, ISO 50, a chip conveyor, rotary table, and an ATC 40. Consider the opportunity to buy this MTE BF 3200 Bed Type Milling Machine. Contact us for more information. Application Types Milling

Year of construction: 1998, condition: ready for operation (used), General Data Machine weight 9500 kg Measurements height 2760 mm Dimensions Machine Length 6600 mm Table Table load 4000 kg Fgjdpsx D D Nzefx Addjk Main Drive Number of axis 3 Spindle Speed 4000 RPM Spindle motor power 29 kW Tool taper ISO 50 Movement X-Axis Movement 2500 mm Z-Axis Movement 800 mm Y-Axis Movement 800 mm This 3-axis Nicolas Correa CF-22 Bed Type Milling Machine was manufactured in 1998. It features a universal manual U22 head with dual orientation, hydraulic tool clamping, and an ISO 50 tool taper. The table dimensions are 2,500 × 700 mm, supporting a maximum load of 4,000 kg. Spindle speeds range up to 4,000 rpm, powered by a 29 kW motor. Reach out for further details regarding this machine. Application Types Milling

Year of construction: 1991, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model TNC 355 NC Main Drive Spindle speed range 10 to 1600 Spindle bore 150 mm Number of axis 4 Movement X-Axis Movement 3000mm Y-Axis Movement 2000mm Y-Axis Rapid Traverse 7100 mm/min Z-Axis Movement 1600mm Z-Axis Rapid Traverse 7100 mm/min W-Axis Movement 700mm W-Axis Rapid Traverse 7100 mm/min Fgodpfx Adex D Epvodek Tools Type of tool holder SK50 Clamping Unit Clamping force 25 kN This 4-axis UNION BFK 150/2 Bed Type Milling Machine was manufactured in 1991. It features a Heidenhain control system and SK50 tool holder, with travel distances of X=3000mm, Y=2000mm, Z=1600mm, and W=700mm. If you are looking to get high quality milling capabilities consider the UNION BFK 150/2 machine we have for tact us for more information. Application Types Milling

Year of construction: 2003, condition: ready for operation (used), Control Unit Brand SELCA Model SELCA 3040 Main Drive Spindle speed range 5000 Spindle motor power 22 kW Tool taper ISO 50 Number of axis 4 Movement X-Axis Movement 2000 mm Y-Axis Movement 1250 mm Z-Axis Movement 1250 mm Media Chip conveyor Yes Additional Equipment Remote handwheel Chip conveyor Through-spindle coolant This 3-axis Parpas THS125/2000TG was manufactured in 2003. It features a SELCA 3040 control unit, a main spindle with 5000 rpm and 22 kW power, and an electrospindle that reaches up to 28,600 rpm. The machine includes a 24-position tool changer and accessories like a chip conveyor and through-spindle coolant. If you are looking to get high-quality milling capabilities consider the Parpas THS125/2000TG machine we have for sale. Contact us for more information. Fodpfx Adsx D E T Iodegk Application Types Milling

Year of construction: 2017, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model ITNC 530 Main Drive Number of axis 4 Movement X-Axis Movement 3000 mm Y-Axis Movement 1500 mm Z-Axis Movement 1100 mm Additional Equipment Direct hydraulic balancing system (double cylinder) Workpiece : Fixed table: 3100x1000 mm Table : External low-pressure spindle cooling system Disc tool magazine with 24 ISO50 positions, with tool exchanger arm, complete with support and management software located at the end of X-axis travel Hydraulic system, power supply, and wiring / 6000 W cooling unit / Hydraulic and electric cabinets (Rittal) on the ground Work area lighting; Machine and spindle hour counters / External operator station on the ground – mobile operator panel / C-axis with torque motor 2 longitudinal screw chip conveyors + 1 transversal belt conveyor / Safety fences including panels and sliding steel door with Lexan window, compliant with CE safety standards. Upper cover included. Dividing wall and software setup for pendulum machining / Renishaw RMP60 digital probe BLUM fixed laser presetter station, including Blum measurement cycles + zeroing sphere Voltage: 400 Vac / Frequency: 50 Hz This 4-axis JOBS FRAZER cnc milling machine was manufactured in 2017. It features a large fixed table of 3100x1000 mm and high-speed axes capable of up to 35 m/min, ensuring efficient machining. The machine includes a Heidenhain iTNC 530 HSCI CNC for precise control and a 24-position disc tool magazine. If you are looking to get high-quality milling capabilities, consider the JOBS FRAZER machine we have for sale. Contact us for more information. Application Types Milling Fjdpfsx D E Uljx Addjgk

Year of construction: 1991, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Fsdpsx D Humjfx Addsgk Model TNC 415 This 3-axis Huron X 61 38 bed type milling machine was manufactured in 1991. It is equipped with a Heidenheim TNC 415 control system and offers substantial travel dimensions with an X-axis of 2400 mm, Y-axis of 1000 mm, and Z-axis of 1000 mm. The machine's transport dimensions are 3000 mm in breadth, 1400 mm in thickness, and 3000 mm in height. Consider the opportunity to buy this Huron X 61 38 machine we have for sale. Reach out for more information. Application Types Milling

Year of construction: 2003, condition: ready for operation (used), This DIMTER S50 Opticut was manufactured in 2003. A robust optimizing cross-cut saw, it features a processing length of 5 m and a saw blade diameter of 500 mm. A new Movidrive converter was installed in 2018, enhancing its performance. If you are looking to get high-quality cutting capabilities, consider the DIMTER S50 Opticut machine we have for sale. Contact us for more information about this machine. Application Types Sawing (Wood) Fgodpfx Adox D Hxrjdok

Year of construction: 2008, condition: ready for operation (used), Main Drive Spindle speed range 2410 Number of axis 2 Additional Equipment Integral protective hood around cutting area Mobile head roller table (3 m) Fgodpfx Adox D H Eljdsk This SCHÜCO PDG e-Cut 600 was manufactured in 2008. It features tungsten carbide sawblades Ø600 mm, three-phase motors 4 kW at 2800 rpm, and blade rotation speed of 2410 rpm. The machine includes electronic control for head tilting, mobile head with automatic positioning, and is set up for chips and fumes extraction. Consider the opportunity to buy this SCHÜCO PDG e-Cut 600 Optimizing Cross-Cut Saw. Contact us for further details regarding this machine. Application Types Sawing (Wood)

Year of construction: 2008, condition: ready for operation (used), Control Unit Brand SELCA Model S 4045 PD Movement X-Axis Movement 2500 mm Y-Axis Movement 1400 mm Fgodpfxsx D H E Se Addok Z-Axis Movement 1500 mm Additional Equipment Spindle head: KOSMO 5000 / Layout code: K0590 M4T 40 / Color: Blue RAL 5000 / Azzurro RAL 6027 / Voltage: 380/50 This SACHMAN TRT314 H was manufactured in 2008. A robust bed type milling machine featuring a large table size of 1200 x 1200 mm and extensive X, Y, Z travels of 2500 mm, 1400 mm, and 1500 mm respectively. It includes a SELCA S 4045 PD CNC for precise control and dual chip conveyors for efficient chip evacuation. Consider the opportunity to buy this SACHMAN TRT314 H bed type milling machine. Contact us for more information. Application Types Milling

Year of construction: 2001, condition: ready for operation (used), General Data Machine weight 9200 kg Control Unit Brand AMADA Main Drive Pressing force 200 kN Stroke 1350 mm Additional Equipment Fsdpfx Ajx D If Heddegk Next to the machine, there are 2 tool cabinets This AMADA Vipros 255 was manufactured in 2001. It is a used punching and bending machine, ideal for those looking to enhance their metal fabrication capabilities. Contact us for more information about this machine. Application Types Punching

Year of construction: 1990, condition: ready for operation (used), General Data Measurements width 3000 mm Measurements depth 5000 mm Measurements height 2500 mm Machine weight 12000 kg Control Unit Brand FAGOR Main Drive Spindle speed range 3000 Spindle motor power 15 kW Tool taper ISO 50 Number of axis 3 Movement X-Axis Movement 2000 mm X-Axis Rapid Traverse 10000 mm/min Y-Axis Movement 800 mm Y-Axis Rapid Traverse 10000 mm/min Z-Axis Movement 800 mm Z-Axis Rapid Traverse 10000 mm/min This 3-axis Correa XB-420 Bed Type Milling Machine was manufactured in 1990. Ideal for precision milling, it offers robust construction and reliable performance. Consider the opportunity to buy this Correa XB-420 Bed Type Milling Machine. Contact us for more information. Fgedox D Ihhspfx Addok Application Types Milling

Year of construction: 2018, condition: ready for operation (used), This DR. HOCHSTRATE SBM 3000/6 was manufactured in 2018. It features a PLC control system, operates on 400/50 V/Hz with a power of 7.5 kW, and handles sheet bending up to 6 mm thick and 3000 mm wide. It includes hydraulic clamping and programmable rear stops. Consider the opportunity to buy this DR. HOCHSTRATE SBM 3000/6 Folding Machine. Contact us for more information. Fgedpsx D Rf Aofx Addek Application Types Other Sheet Metal Machinery

Year of construction: 2016, condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 2180 mm Measurements height 3350 mm Machine weight 9300 kg Additional Equipment Lower Hydraulics Pressure Force: 350 kN / Lower Hydraulics Travel: 200 mm / Lower Hydraulics Table Size: 400x400 mm / Lower Hydraulics Travel Speed: 52 mm/min Fjdpfx Aox D S Dyoddjgk This Sahinler HKP-Z 100 was manufactured in 2016. A robust C-frame PLC controlled deep drawing press, it features a pressure force of 1000 kN and a stroke of 500 mm. The machine includes a large table size of 900x600 mm and a throat depth of 300 mm, suitable for diverse punching and bending tasks. Consider the opportunity to buy this Sahinler HKP-Z 100 punching and bending machine. Contact us for more information about this machine. Application Types Punching