Sägewerk Reiser

Condition: used, Wood sawmill 1/26 Djdpfx Amjzkh N Sj Tsuw

Condition: used, Wood sawmill 2/26 Dedpozkh N Ejfx Am Tsuw

Condition: used, Wide selection of used spare parts in good to very good condition for EWD Esterer HDE 71. Overhang plates, adjustment gearboxes for overhang adjustment, complete feed unit, saw frame, roller shafts with sprockets, hydraulic cylinders for roller lifting, chain housing, etc. Dsdpfxszht Hwo Am Tsuw

Year of construction: 1998, condition: ready for operation (used), A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible. Dujdpfxjzf Nbxo Am Tew

Condition: used, Meassuring frame for logs and timber type Rema 9001 Maximum meassuring field 700 mm Duedpfszd Azvsx Am Tow

Condition: excellent (used), For sale: Dujdezdq Nnspfx Am Tow FINSCAN moisture meter scan moisture meter, measures dried lumber. (these pictures are just as reference, the Finscan for sale is exact same) Available for delivery July 2026 Located in Finland.

Condition: excellent (used), functionality: fully functional, Robust EWD reduction gearbox for gate drive. Shaft 100 mm. Pulleys 900 x 280 and 560 x 450 mm. Pulleys attached to the shaft with tensioning elements. Dujdpfszdiq Ssx Am Tew Used for 2 years. Suitable for all EWD / Esterer gates.

Year of construction: 1993, condition: ready for operation (used), Various old sawmill machines are available. 1) Costa Leonard twin-shaft saw, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Esterer WD step feeder, max. log length: 6000mm. 3) Esterer HD 30 saw frame, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Zeno drum chipper, drive power: 55kW. 5) Zimac board stacking machine, working length range: 800mm-3000mm. 6) Schicks steel chimney, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible. Dsdpsyw Sv Esfx Am Teuw

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER S 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Duedoywh Hmopfx Am Tew

Year of construction: 2015, condition: used, functionality: fully functional, A used electric 4-step feed unit manufactured by Ingenjörsfirma Gösta Hedlund AB in very good condition. Dedsyiaafopfx Am Teuw

Condition: used, We offer a board stacking machine. The stacker features a separating device and a powered roller table for pre-made packaging. More than half the width is in like-new condition, as only 120 cm wide boards have been stacked. Machine width: 4.30 m Machine length: 7.50 m Dusdpfoyh U I Ijx Am Tjw The entire system corresponds to the foto

Condition: used, Chip screen Year of manufacture: 1996 Manufacturer: Konewood/Andritz Model: CS600 Screen capacity: 400-675 m3/h Weight around: 10 tons Dodpoyhn Dxjfx Am Teuw

Condition: new, 2 new, two-part gang saw bottom rollers, 250 mm diameter, bore 105 mm, 685 mm long Dsdpsyctwtefx Am Tsuw

Condition: excellent (used), HHydraulic drive variator with 3.0 kW motor, 1450 rpm, with reduction gear for speed reduction, electric adjustment via worm gear motor, output speed 0 to 25 rpm, output torque 1200 Nm at 14 rpm or approx. 3 kW at 14 to 25 rpm Dedpfxox U Tfpe Am Tsuw

Condition: ready for operation (used), Metaldetector with electric -operating cabinet, inner diam. 1000 mm Dujdpfx Amox Agttj Tew

Condition: excellent (used), Year of construction: 2013, Chipper for producing cellulose or fuel chips manufactured by Heinola Finland. Dusdpfxoxxql Ej Am Tsw Drum diameter 900 mm Inlet width 700 mm Capacity up to 110 m3 per hour with max motor power Suitable motor powers: 70 to 160 kW

Condition: excellent (used), functionality: fully functional, 2 pieces of gate uprights, heavy-duty design, for Esterer Gatter HDE or SS 71, with cover. Duodpfx Amsxw Uf Te Tjw

Condition: excellent (used), functionality: fully functional, Complete saw frame for Esterer Gatter HDE or SS 71. Djdpfxsxw Ubns Am Tsuw

Condition: used, Gatter Saw Sharpening Machine Vollmer CNHV Year of manufacture: 1978 Gatter saw blade width: 60-160 mm Toothing length: max. 1450 mm Tooth pitch: 14 – 40 mm Tooth height: max. 25 mm Rake angle: 0° - 30° Blade thickness: 0 – 6 mm Grinding wheel: diameter 200 mm Working speed: 30, 50, 75 teeth per minute Tooth forms: 3 pcs Djdpfxoxvz R Ho Am Tsuw Connected load: 2.1 kW Weight: 500 kg Including gatter saw set device Lorroch SGB 6 (similar to Meinert PH6D) year 1983

Condition: excellent (used), functionality: fully functional, Schorch electric motor 75 kW - 735 rpm. For direct frame saw drive. With reinforced bearings. Equipped with a 400 mm diameter pulley. Dujdpfxsxvpqbo Am Tow

Year of construction: 2021, condition: excellent (used), Scanner Finnos X-ray Dujdpsxmk I Ajfx Am Tjw Manufacturer: Finnos Year of purchase - 2021 3D, laser and X-ray technology Including Jack-Steel measuring conveyor (2021) EROP ergonomic solution for sorters(sorting chair etc.) was in operation for less than 2 years

Condition: reconditioned (used), WOERNER or BOSCH lubricating oil pumps with 8 to 14 pump elements and oscillating drive, oil delivery rate individually adjustable for each pump element Dedpexl Aauefx Am Touw

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 56 or SS 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm 1 set of lower guide shoes for bearing 6210 for SS 56 Duedow Eu Akjpfx Am Tsw

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, For sale here are 4 log lifters, which are hydraulically driven. Djdpfsw Dubwjx Am Touw

Condition: good (used), 2 pieces of frame stands. Oscillating shaft and overhung shaft. Dusdswwr Eaepfx Am Tow 2 pieces of split lower frame rollers. Shafts and bearings for rollers. Guide bracket, etc.