Vernet Behringer

Condition: ready for operation (used), Two similar Snow column drilling machines are available. 1) Snow TA-3, speed: 700rpm, table dimensions X/Y: 460mm/270mm, vertical table adjustment: 255mm, spindle taper: MK1. 2) Snow TA-3-S, speed: 1000rpm, table dimensions X/Y: 460mm/270mm, spindle taper: MK1. An on-site inspection is possible. Lodpfx Ajxqgyijabsah

Year of construction: 2007, condition: ready for operation (used), A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible. Lajdpfsxp Rb Iex Aaboh

Year of construction: 2008, condition: ready for operation (used), A Peddinghaus saw and drilling combination system is available. 1) Saw unit Peddinghaus 1100 DG, max. product diameter: 510mm, max. product dimensions X/Y: 1100mm/500mm, cutting speed: 150m/min, saw blade dimensions X/Y/Z: 9300mm/54mm/1.6mm, max. product weight: 500kg, working height: 630mm, system dimensions X/Y/Z: approx. 2000mm/4500mm/2300mm, weight: approx. 5500kg. 2) Drilling unit Peddinghaus PCD 1100, drilling spindles: 3, tool holder: MK4, spindle power: 10kW, spindle speed: 900rpm, spindle stroke: 330mm, travel path Y/Z: 470mm/1100mm, rapid traverse: 5m/min, feed rate: 300mm/min, max. hole diameter: 40mm, product thickness range: 6.3mm–460mm, product width range: 76mm–1100mm, min. product length: 1575mm, max. product weight: 8165kg, clamping pressure vertical/horizontal: 800kg/2200kg, machine dimensions X/Y/Z: approx. 2400mm/1900mm/4500mm, weight: approx. 6000kg, control system: Siemens 840D i. Without roller conveyor for saw. Including cross conveyor. The saw shows a hydraulic leak, the chip brush motor is defective, and the spindle may require repair. Documentation available. On-site inspection possible. Ledsxp Rbzjpfx Aabeah

Condition: ready for operation (used), An old pillar drilling machine Gillardon is available. Drilling capacity steel/cast iron: 32mm/40mm, quill stroke: 140mm, spindle taper: MK3, speed: 2800rpm, column diameter: approx. 115mm, throat depth: approx. 250mm, drill table dimensions X/Y: 400mm/400mm, weight: approx. 300kg. An on-site inspection is possible. Lasdsxnp Svepfx Aaboh

Year of construction: 2002, condition: ready for operation (used), Travel X/Y/Z: 3000mm/2300mm/1600mm, travel W: 700mm, max. table-to-spindle distance: 2300mm, table dimensions X/Y: 1800mm/2200mm, max. table load: 10000kg, spindle diameter: 130mm, spindle speed: 2500rpm, rapid traverse X/Y/Z: 10m/min, rapid traverse W/B: 5000mm/min/500mm/min, feed X/Y/Z: 4m/min, tool holder: BT50, tool positions: 38, positioning accuracy X/Y/Z: +/-0.008mm, positioning accuracy W: +/-0.012mm, repeatability X/Y/Z: +/-0.004mm, repeatability W: +/-0.008mm. Machine dimensions X/Y/Z: approx. 7050mm/7200mm/4800mm, weight: approx. 37000kg, control: TOSNUC-888. Documentation available. An on-site inspection is possible. Laodpfjxf Ikrjx Aabeh

Year of construction: 1973, condition: ready for operation (used), Drilling capacity (steel): 50mm, spindle speed: 1700rpm, reach: 45mm-1500mm, workpiece height range: 470mm-1500mm, sleeve stroke: 680mm, quill stroke: 350mm, spindle taper: MK5, max. tool weight: approx. 30kg. Machine dimensions X/Y/Z: approx. 2600mm/1100mm/3500mm, weight: approx. 4000kg. An on-site inspection is possible. Laodpfx Aaoxf Iizobsh

Year of construction: 2009, condition: ready for operation (used), A high-precision CNC drilling/reference hole machine Mach3 Lab with X-ray vision system is available. Travel X/Y: 700mm/800mm, max. panel dimensions X/Y: 700mm/700mm, min. panel dimensions X/Y: 300mm/200mm, panel thickness range: 0.3mm-6mm, Z-axis stroke: 40mm, spindle speed: 30000rpm, positioning accuracy: +/-0.003mm, transducer resolution: +/-0.001mm, X-ray range X/Y: 700mm/580mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Lajdpexd Avgsfx Aabjh

Year of construction: 1978, condition: ready for operation (used), Drilling spindle stroke: 160mm, spindle taper: MK4, spindle speed: 1750rpm, reach: 300mm, feed: 0.3mm/rev, table dimensions X/Y: 620mm/470mm, machine dimensions X/Y/Z: approx. 620mm/950mm/1900mm, weight: approx. 450kg. Includes coolant system and threading device. An on-site inspection is possible. Laedpfoxc Ni Dsx Aabsh

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 607-9005, PROFILE DRILLING MACHINE PBA 3000 Used machine, year of manufacture 2016 For rational and efficient drilling of beams, profiles, pipes, and other long parts Technical Data: Max. travel path x-axis: 3000 mm Max. travel path y-axis: 250 mm Max. travel path z-axis: 350 mm Max. support length: 5700 mm (thanks to extendable support rollers) Max. support weight: 500 kg 3 mechanical vices Max. clamping width: 210 mm Clamping jaw width: 200 mm Jaw height: 60 mm Digital position display Stop points: 10 pcs. Lsdjxcuccepfx Aaboah Drilling unit TSB 35 Technical Data: Motor: 1.2 kW, 400 V Drilling capacity in S235JR: ø 30 mm Continuous drilling capacity S235JR: ø 25 mm Tapping S235JR: M20 Spindle taper: MK 4 Spindle stroke: 155 mm Gearbox speed: 12 steps Speed range: 125 – 3030 rpm Minimum quantity lubrication Subject to prior sale. No liability accepted for typographical errors or omissions.

Year of construction: 2025, condition: new, neu 2025 030139 Oktober 2025, Zwischenver Deutschland 7170.9 € 138.4 € 23 mm MK 2 260 mm 20 - 2000 U/min 1,5 kW M16x1 430 mm 715 mm 1800 mm 290 kg manuell mm/U 110 mm 230 - 850 mm 420 x 340 mm 100 mm Drilling capacity / normal drilling capacity 23/25 (in E335/ST60) Ledpexcg Ecefx Aabeah Manual feed Main switch Gewindeschneideinrichtung Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug OPTIONS: Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Year of construction: 2025, condition: new, neu 2025 030140 Oktober 2025, Zwischenver Deutschland 13101.81 € 251.55 € 30 mm MK 3 280 mm Stufe 1: 125 - 4000; Stuf U/min 0,9 / 1,45 kW Lodoxcg D Espfx Aabeah M20 820 mm 520 mm 1900 mm 320 kg 0 - 300 mm/U 240 - 790 mm 420 x 340 mm 125 mm Drilling capacity / normal drilling performance25/30 (in E335/ST60) Automatic feed Digital speed-, drilling depth and feed display Drilling depth adjustment with fine adjustment and undervoltage trigger EMERGENCY STOP pushbutton Stepless speed control Table height adjustment via toothed rack Connection cable (1.5 m) with CEE plug Drill protection with electr. Fuse Thermal overload protection Digital drilling depth, speed and feed rate display Electronically infinitely variable feed incl. Spindle monitoring Free cutting device Thread cutting device, thread cutting capacity max. M20, setting the thread cutting depth via digital depth display Drilling depth shut-off; programmable; easy operation Drilling cross with pushbutton for feed on/off switching Optional transparent protective hood without LED lighting as standard OPTIONS: Drill package 5 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: used, Year of construction: 1990, Type/Designation: 307-153/714-750 Serial Number: 82/293 Country of Manufacture: Made in West Germany (before 1990) Technical Data (approximate, for this type of CHIRON machine from the 1970s/80s): Machine Type: Column drill / single-station drilling machine for metal Motor Power: typically from 1.5 kW to 3 kW (three-phase, 380 V) Spindle Speeds: 100 – 4000 rpm (mechanically or electrically switched) Max. Drilling Diameter in Steel: approx. 20–25 mm (depending on the version) Spindle Taper: usually MT2 or MT3 Feed: manual or mechanical (some models equipped with automatic feed) Weight: several hundred kilograms (approx. 300–600 kg) Intended Use: serial production in industry (precise hole drilling, light milling operations in metals, use in production lines) Machine Table: cast iron, capable of securing workpieces Full control panel – variable speed adjustment available 2. Key Working Head Parameters (important for riveting): Press Force (kN) – if specified on the cylinder label or in the electrical box (often 10–30 kN for this size) Spindle/Slide Stroke (mm) – measure from top to bottom position Ledpfxew T U Ubs Aabeah Daylight (working clearance: distance between tool tip and table at top position) Throat Depth – from spindle axis to column (working reach) Max. Rivet Diameter / Work Range – specify based on tests or prior use Voltage: usually 380/400 V, 50 Hz 3. Dimensions and Logistics: L×W×H (of base/overall, in cm) Electrical Supply: 3×400 V, protection e.g. C16–C20 (indicate according to power rating) Weight (weigh with pallet jack with scale or estimate)

Condition: ready for operation (used), Spindle diameter: 90mm, boring spindle longitudinal adjustment: 700mm, spindle head vertical adjustment: 1250mm, speed: 1000rpm, rapid traverse: 2600mm/min. Table swivel range: 360°, table clamping surface X/Y: 1100mm/1400mm, table cross travel: 1800mm, table longitudinal travel: 1250mm, max. table load: 4000kg, bed dimensions X/Y: 3380mm/1800mm. Machine dimensions X/Y/Z: approx. 4650mm/3900mm/3000mm. Documentation available. An on-site inspection is possible. Lodpfjw N Shqox Aabsah

Year of construction: 1988, condition: ready for operation (used), Drilling capacity: 35mm, drill spindle taper: MT4, quill stroke: 285mm, reach: 300mm-1000mm, speed: 2500rpm, arm length: 500mm, spindle-to-base plate distance: 1000mm, base plate dimensions X/Y: 1150mm/780mm. An on-site inspection is possible. Ledpfxow Nq Suj Aabeah

Year of construction: 1969, condition: ready for operation (used), Bohrleistung: 55mm, Ausladung: 1600mm, Spindelaufnahme: MK5, Spindelhub: 400mm, Drehzahl: 1800U/min, Vorschub: 1,5mm/U, Tischdimensionen X/Y: 1500mm/800mm, Maschinendimensionen X/Y/Z: ca. 2800mm/1000mm/3000mm, Gewicht: ca. 5500kg. Eine Besichtigung vor Ort ist möglich. Lajdpfx Ajw Na E Djabsh

Condition: ready for operation (used), A small geared drilling machine Knuth is available. Drilling capacity steel: 25mm, thread cutting steel: M10-M12, spindle taper: MT3, speed: 2900rpm, quill stroke: 400mm, arm reach: 250mm, table dimensions X/Y: 270mm/300mm. Machine dimensions X/Y/Z: approx. 600mm/600mm/1200mm, weight: approx. 200kg. An on-site inspection is possible. Ledpfx Asw Iqhajabsah

Condition: ready for operation (used), Drilling diameter: 75mm, drill spindle diameter: 114mm, spindle taper: MT5, spindle stroke: 500mm, speed: 1400rpm. Clamping surface top: 750mm/1000mm, clamping surface side: 530mm/1000mm, base plate: 1000mm/1600mm, arm adjustment: 1000mm, arm swivel: 360°. Spindle centre to column distance: 600mm/1600mm, spindle centre to table distance: 800mm/1800mm. Documentation available. An on-site inspection is possible. Lsdpfow Extmsx Aabsah

Condition: ready for operation (used), A 3-spindle deep hole drilling machine is available. 1) Deep hole drilling unit, travel X/Y/Z: 14000mm/300mm/2650mm, drilling spindles: 3, spindle distance: 325mm–375mm, motor power: 22kW, table dimensions X/Y: 6000mm/4000mm, number of tables: 2, max. workpiece weight: 50000kg/table, max. workpiece dimensions X/Y: 12000mm/4000mm, max. drilling diameter: 65mm. 2) Milling unit, travel X: 14000mm, max. milling diameter: 52mm, milling spindle power 1/2: 8.7kW/13kW. 3) Column drilling unit Soraluce TR1-1250, travel X: 14000mm, drilling diameter: 50mm. Includes heating plates, heated decoiling plates, steam plate, chip conveyor, partial NC control Mitsubishi, and various tools and clamping devices. Documentation available. An on-site inspection is possible. Lajdpfow Extyex Aabeh

Condition: new, neu ca. 6-8 Wochen ab Auftrag Spanien 8640 € 166.75 € 30 mm MK 3 Lasdpfswva Hpsx Aabjh 250 mm 65 - 3.060 (8) U/min 380 mm 600 mm 2060 mm 260 kg 100 mm 170 - 660 mm 1.216 mm 300 x 270 mm 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE High quality geardrive machine 2 automatical feed Left-right drilling Automatic tool ejector Adjustable depth stop Table with T-slots Drill guard with micro switch Lightening equipment User manual in English or GERMAN CE OPTION: coolant equipment with T-slots in base plate ERB € 910,- Reverse for tapping IR/RS € 810,-

Year of construction: 1995, condition: used, bore capacity in steel (diameter) 50 mm throat 335 mm bore stroke 250 mm feed power max. 16 kN spindle taper MK4 spindle motor 3 kW Laodpfjwu Hg Tsx Aabsh table surface area 850 x 450 mm travel -x axis 600 mm travel -y axis 300 mm travel -z axis 205 mm weight of the machine ca. 1,8 t dimensions of the machine ca. 1,618 x 1,802 x 2,520 m

Year of construction: 2024, condition: new, neu 2024 3984 prompt, Zwischenverkauf v Spanien 9930 € 191.65 € 1 32 mm MK 3 250 mm 65 - 125 - 185 - 365 - 54 U/min M24 665 mm 640 mm 2100 mm 260 kg Automatisch 0,10 - 0,20 - mm/U 100 mm 85 - 635 mm 1.170 mm 300 x 270 mm 665 x 400 mm 120 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE geardrive machine 3 aut. feeds left-right drilling table with t-slots Ledowirzxopfx Aaboah depth adustable end tool ejector drill guard CE norms user manual in GERMAN (symbol photo) OPTIONS: lighting equipment inkl. coolant equipment and machine base with T-slots inkl. reverse for tapping € 810,--

Year of construction: 2024, condition: new, neu 2024 3983 prompt, Zwischenverkauf v Spanien 7260 € 140.12 € 1 1 32 mm MK 3 250 mm 65 - 125 - 185 - 365 - 54 U/min 1,8 / 2,6 kW M24 600 mm Lasdpswirzrsfx Aabsh 640 mm 2020 mm 260 kg 100 mm 85 - 635 mm 1.170 mm 300 x 270 mm 600 x 380 mm 120 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE geardrive machine manual feed left-right drilling table with t-slots depth adustable end tool ejector drill guard CE norms user manual in GERMAN (sample photo) OPTIONS: lighting equipment € 260,-- coolant equipment and machine base with T-slots € 910,-- reverse for tapping € 810,-- DELIVERY TIME WITH OPTIONS APPROX. 6 WEEKS.

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 12660 € 243.07 € 40 mm MK 4 350 mm 132-194-277-319-466-666-8 U/min 2.2 kW M33 755 mm 480 mm 2280 mm 490 kg 0,1 - 0,2 - 0,3 mm/U 150 mm 80 - 880 mm 1225 mm 480 x 480 mm 175 mm Automatic feed with mechanical clutch Geared drive Lasdpswiq Tmsfx Aaboh Hardened and ground high quality steel gears Speed plate and selecting levers on head front. Depth scale and adjustable depth stop Automatic tool ejector Emergency STOP push button Spindle reversing switch Electric equipment integrated on machine’s head Machined base with coolant tank Worklight MGI: Rotating and tilting table for model 40 Safety drill guard with microswitch CE mark ALTERNATIVE: VERSION BX.40MIT ELEKTROMAGNETIC CLUTCH € 14.710,-- OPTIONS: Electronic speed variato with speed digital reader(VE+TAK) € 1.310,00 A) 66-211 B) 97-310 C) 138-443 D) 160-510 E) 233-746 F) 333-1066 G) 440-1413 H) 648-2074 I) 926-2963 Depth digital reader (LBC) € 640,00 Manual tapping system (IR/RS) € 810,00 Manual tapping system for models with variator(IR/RS-VE) € 560,00

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 6800 € 131.24 € 30 mm MK 3 250 mm 245 - 4000 U/min M25 400 mm 655 mm 1185 mm 280 kg 120 mm 100 mm 85 - 635 mm 1.195 mm 300 x 270 mm 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE Lajdpfx Ajwiq N Usaboh V-belt drive manual feed left-right drilling automatic tool ejector adjustable depth stop table with T-slots drill guard with micro switch lightening equipment user manual in English or GERMAN CE Option: Variable speed incl. digital display (VE+TAK) € 1.310,--- Tapping device (IR/RS) € 810,-- Coolant equipment incl. T-slots in the ground plate (ERB) € 910,--

Condition: new, neu 3935 ca. 10 Wochen ab Auftrags Spanien 18150 € 348.48 € 50 mm MK 4 400 mm 54 - 1032 (9) U/min 2.9 kW M36 600 mm 1200 mm 2500 mm 710 kg 0,1 / 0,2 / 0,3 / 0,4 mm/U 230 mm 200 mm 50 - 850 mm 1290 mm 550 x 550 mm 1060 x 600 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE High quality gear drilling machine cooling equipment VDE electric chuck protection left right drilling lighting front handwheel for sensitive feed table turn and tiltable user manual in GERMAN Laedpfxswiq H He Aabjh OPTIONS: manual tapping systemIR/IRS € 810,- electronic speed variator with digital read out VE+TAK € 2.110,- digital read out for drilling depth LBC € 640,- ALTERNATIVE: ERLO B-50 VERSION WITH ELECTROMAGNETIC CLUTCH € 20.280,--