M.S. Metall-&Schweißtechnik

Condition: used, Year of construction: 2004, Machine Type: Vertical Machining Center (VMC) Travels X-axis: 1,270 mm (50") Y-axis: 508 mm (20") Z-axis: 635 mm (25") Table Table size: 1,321 × 495 mm (52" × 19.5") Max table load: 1,587 kg (3,500 lbs) T-slots: 5 slots, 16 mm Spindle Spindle taper: CAT 40 / BT40 Spindle speed: 8,100 rpm (optional 12,000 rpm) Spindle motor: 30 hp (22.4 kW) vector drive Drive type: Inline direct-drive Coolant Through Spindle (TSC): 300 psi (21 bar) standard for TSC version Tool Changer Automatic Tool Changer: 40 tools (side-mount ATC) Tool change time: ~2.8 sec (tool-to-tool) Max tool weight: 5.4 kg (12 lbs) Feedrates Rapid traverse: 25.4 m/min (1,000 ipm) Cutting feed: up to 16.5 m/min (650 ipm) Accuracy Positioning accuracy: ±0.005 mm Repeatability: ±0.0025 mm Control Control system: Haas CNC Control Memory: 1 GB Networking: Ethernet / USB Dimensions & Weight Machine weight: approx. 7,100 kg Footprint: approx. 4.1 × 2.8 m Height: approx. 3.1 m Electrical Power requirement: 208–240 / 360–480 V, 3-phase Pgedpfx Aajyfmtts Deg Air requirement: 6.9 bar (100 psi)

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 54 m/min, rapid traverse Y-axis: 54 m/min, rapid traverse Z-axis: 54 m/min, feed length X-axis: 700 mm, feed length Y-axis: 400 mm, feed length Z-axis: 330 mm, nominal power (apparent): 10 kVA, controller manufacturer: Fanuc, controller model: Series 16i-MB, workpiece weight (max.): 250 kg, table width: 410 mm, table length: 850 mm, table load: 250 kg, overall weight: 2,200 kg, spindle speed (max.): 20,000 rpm, spindle nose: BT30, number of spindles: 1, number of slots in tool magazine: 21, tool length: 200 mm, tool diameter: 80 mm, tool weight: 2,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Fanuc Robodrill Alpha T21iDL 3-Axis Machining Centre BT30 | 20,000 RPM | 21-Tool ATC | Includes Tool Holders Fanuc Robodrill Alpha T21iDL 3-Axis Machining Centre with Fanuc 16i-MB control. 20,000 RPM BT30 spindle, 850×410 mm table, 21-tool ATC, includes tool holders. High-speed precision CNC available now. Manufacturer: Fanuc Model: Alpha T21iDL Machine Type: 3 Axis Vertical Machining Centre Year: 2004 Control: Fanuc Series 16i-MB Condition: Very Good We are pleased to offer this Fanuc Robodrill Alpha T21iDL 3-Axis Vertical Machining Centre, a high-speed, high-accuracy CNC machine renowned for its exceptional reliability, fast cycle times, and compact footprint. Pgsdpfx Aaeyfiavo Dsg Equipped with a 20,000 RPM BT30 spindle, Fanuc CNC control, and 21-station automatic tool changer, this Robodrill is ideal for precision machining, high-speed milling, aluminium work, and small component production. Key Specifications General Manufacturer: Fanuc Model: Alpha T21iDL Type: 3-Axis Vertical Machining Centre Control: Fanuc Series 16i-MB Axis Travels X Axis: 700 mm Y Axis: 400 mm Z Axis: 330 mm Table Table Size: 850 × 410 mm Maximum Table Load: 250 kg (uniform) Spindle Spindle Speed: Up to 20,000 RPM Spindle Taper: BT30 Spindle Speed Ranges: 150 – 12,000 rpm: Max tool Ø80 mm 12,000 – 15,000 rpm: Max tool Ø60 mm 15,000 – 20,000 rpm: Max tool Ø45 mm Toolchanger Automatic Tool Changer: 21 Tool Stations Maximum Tool Weight: 2 kg per tool Total tool weight: 23 kg Maximum Tool Length: 200 mm Maximum Tool Diameter: 80mm Rapid Traverse X / Y / Z Rapids: Up to 54 m/min Operating Hours Cutting Time: 14,654 hrs (correct at time of advertising) Machine Weight: 2,200kg Features & Equipment Fanuc Series 16i-MB CNC control High-speed 20,000 RPM BT30 spindle 21-station Automatic Tool Changer Includes 21 tool holders Compact, rigid Robodrill design Extremely fast rapids and tool changes Ideal for lights-out and high-speed production Please Note No vices included with the machine Includes 21 x BT30 Tool Holders Ideal Applications High-speed aluminium machining Precision small component manufacturing Electronics, medical & automotive parts Toolroom & production environments The Fanuc Robodrill Alpha T21iDL is widely recognised as one of the most reliable and fastest small-format machining centres on the market, offering outstanding accuracy and productivity with minimal footprint. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 54 m/min, rapid traverse Y-axis: 54 m/min, rapid traverse Z-axis: 54 m/min, feed length X-axis: 700 mm, feed length Y-axis: 400 mm, feed length Z-axis: 330 mm, nominal power (apparent): 10 kVA, controller manufacturer: Fanuc, controller model: Series 16i-MB, workpiece weight (max.): 250 kg, table width: 410 mm, table length: 850 mm, table load: 250 kg, rotary table diameter: 130 mm, overall weight: 2,200 kg, spindle speed (max.): 10,000 rpm, spindle nose: BT30, number of spindles: 1, number of slots in tool magazine: 21, tool length: 200 mm, tool diameter: 80 mm, tool weight: 2,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Fanuc Robodrill Alpha T21iDL 5-Axis Machining Centre – 2004 Fanuc 16i-MB | Nikken 5Ax130FA 4th & 5th Axis | BT30 Fanuc Robodrill Alpha T21iDL 5-Axis Machining Centre with Nikken 5Ax130FA trunnion table (2018). BT30 10,000 RPM spindle, Fanuc 16i-MB control, compact high-speed 5-axis CNC. Available now. Manufacturer: Fanuc Model: T21iDL with Nikken 5AX130FA Table Machine Type: 5 Axis Vertical Machining Centre Year: 2004 Control: Fanuc Series 16i-MB Control Condition: Very Good We are pleased to offer this 2004 Fanuc Robodrill Alpha T21iDL Vertical Machining Centre, professionally upgraded with a 2018 Nikken 5Ax130FA 4th & 5th Axis Trunnion Table, transforming this machine into a compact, high-speed 5-axis machining solution. This system combines the legendary speed and reliability of the Fanuc Robodrill platform with Nikken’s industry-leading rotary table accuracy, making it ideal for complex multi-face machining, aerospace, medical, and precision engineering applications. Base Machine Specifications General Manufacturer: Fanuc Model: Alpha T21iDL Year: 2004 Type: 5 Axis Vertical Machining Centre Control: Fanuc Series 16i-MB Axis Travels X Axis: 700 mm Y Axis: 400 mm Z Axis: 330 mm Table Table Size: 850 × 410 mm Maximum Table Load: 250 kg (uniform) Spindle Spindle Speed: 10,000 RPM Spindle Taper: BT30 Toolchanger Automatic Tool Changer: 21 Tool Stations Maximum Tool Weight: 2 kg per tool Total tool weight: 23 kg Maximum Tool Length: 200 mm Maximum Tool Diameter: 80mm Rapid Traverse X / Y / Z Rapids: Up to 54 m/min Machine Weight: 2,200kg Nikken 5Ax130FA 4th & 5th Axis Trunnion Table Manufacturer: Nikken Model: 5Ax130FA Year: 2018 Configuration: 4th & 5th Axis Trunnion Table Diameter: Ø130 mm Tilt Axis (A-Axis): ±110° Rotary Axis (C-Axis): 360° continuous Drive Type: Direct servo drive Positioning Accuracy: ±5 arc-sec (typical Nikken spec) Repeatability: ±2 arc-sec Maximum Workpiece Weight: Approx. 20 kg ✔ One of the most popular compact 5-axis rotary tables for Robodrill and small-format machining centres. Machine Hours (Correct at time of advertising) Power On Time: 38,390 hours Operating Time: 13,500 hours Cutting Time: 10,519 hours Features & Equipment Fanuc Series 16i-MB CNC control High-speed Robodrill platform with Nikken 5-axis capability Compact footprint with full 5-axis functionality Ideal for complex multi-face and simultaneous machining Excellent rigidity and thermal stability Please Note No vices included with the machine Podeyfh Urjpfx Aa Djgg Includes 21 BT30 Tool Holders Ideal Applications 5-axis precision machining Aerospace & medical components Complex aluminium and steel parts High-speed small component production This Fanuc Robodrill Alpha T21iDL with Nikken 5Ax130FA offers an outstanding opportunity to acquire a cost-effective, compact 5-axis machining centre from two world-class manufacturers. Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Year of construction: 2004, Opportunity to buy a 5 axis OKUMA machining center with EROWA automation. Including: EROWA Robot Easy automatic loading cell Chip conveyor Heavier coolant pump Higher Spindle speed Automatic measurement system for tool length, diameter setting, and tool breakage detection with a Renishaw laser Automatic measurement function, Renishaw MP10, BT40 Full technical specifications in the attached document. This machine is in very good condition and can be inspected under power upon appointment. Availability: 03/2026 CNC control Okuma OSP-E100M X-axis 762 mm Y axis 460mm Z axis 460mm C axis 360° Table size 400 mm Table load 300 kg Spindle mounting BT40 Big plus spindle Pgsdpfx Aoyfht Uea Dsg Tool changer capacity 32 positions Spindle speed 50-15,000 rpm Spindle hours approx 42000h Cutting hours approx. 38000h Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 750 mm, travel distance Y-axis: 785 mm, travel distance Z-axis: 600 mm, controller manufacturer: FANUC, table load: 600 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 40, number of axes: 5, This 5-axis DN SOLUTIONS DVF 6500 was manufactured in 2022. It features a 650 x 600mm table, capable of handling a maximum weight of 600kg. Equipped with a high-speed spindle up to 18,000 rpm and a 40 tool magazine, it ensures efficient machining. The FANUC control unit and high-pressure 20 bar cooling through the spindle enhance precision and productivity. Consider the opportunity to buy this DN SOLUTIONS DVF 6500 vertical machining centre. Contact us for more information. Pgedpfx Aeyfg I Rsa Deg • Table size: 650 x 600 mm • Tool magazine: 40 tools • Thermal compensation Additional equipment • Renishaw probing system • Through-spindle coolant, high pressure 20 bar • Chip conveyor Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Top CNC Machining Center HAAS VF-2 – 5-Axis – with Loading Robot – Year 2017 For sale: CNC machining center HAAS VF-2 - Excellent condition Pgodpfjyfg Eijx Aa Deg - 5-axis configuration - Includes automatic loading robot - 3200 operating hours. Highlights: - Haas 2-axis rotary table - HANS loading robot - Tool breakage control and tool measurement by Renishaw - Renishaw OMP40 zero-point probe Model: VF-2 5-axis machining Loading robot for automated production Robust and reliable industrial quality User-friendly HAAS control

Condition: used, Year of construction: 2006, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: Haas, total height: 2,750 mm, total length: 2,250 mm, total width: 2,360 mm, table width: 914 mm, table length: 356 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control Haas CNC Table size 914 x 356 mm Table load 680 kg Number of pallets: 1 x Movement X-axis 762 mm Pgsdpfx Aaeydn E Ij Deg Movement Y-axis 406 mm Movement Z-axis 508 mm Spindle taper DIN 68971A Spindle speed 12.000 1/min Spindle motor 22,4kW Magazin capacity 24 + 1 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 62,469 h, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, number of axes: 5, This 5-axis DECKEL MAHO DMU 70 eVo was manufactured in 2003. It features a Heidenhain iTNC 530 control, HSK 63 tool interface, and a spindle speed of 18,000 rpm. The machine offers a tool magazine with 32 positions and a robust coolant system with a 280-liter capacity. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 70 eVo machine we have for sale. Contact us for more information about this machine. • Working hours (as of 04.07.2023): • Operating hours: 62,469 h • Spindle hours: 17,307 h • Rotary/Swivel axes: • C-axis indexing: 360° • B-axis indexing: 0–180° • Workpiece: • Max. workpiece diameter: 700 mm • Tool system: • Tool magazine: 32 positions • Coolant system: • Coolant tank capacity: 280 liters • Coolant type: Alusol SL 51 XBB • Cooling method: External coolant supply • Rapid traverse (X/Y/Z): 50 m/min Additional equipment • Touch probe: TS 641 Pgodpfx Asydlacja Dsg

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Work Area Control: Fanuc 31i-B5 Travel X: 700 mm Travel Y: 400 mm Travel Z: 400 mm Clamping Surface: 850 x 410 mm Max. Table Load: 400 kg Rapid Traverse X/Y/Z Axis: 54 m/min Positioning Accuracy: 0.006 mm Repeatability: 0.004 mm Spindle Technology: Direct drive Max. Speed: 24,000 rpm Max. Power: 26 kW Max. Torque: 35 Nm Tool Holder: BBT 30 Tool Changer Tool Magazine: 21 stations Tool Change Time: 1.3 s Pgjdeydi Hyspfx Aa Deg Equipment Automation Preparation: Automatic loading door (pneumatic) Coolant Supply: Through spindle, 20 bar Workpiece Measurement: Renishaw OMP 400 Tool Measurement: Renishaw Laser NC 4 Warranty: 12 months

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, This is the Haas equivalent of the Fanuc Robodrill and very impressive it is! Shown running on our race car components, we can help with training and setup if required pictures show components we are currently making on the DM2 5th Axis enabled 4th axis Interface, 5th axis Interface, Coolant, Interlocked guards, High speed machining enabled Low Volt Light, Programmable Coolant Nozzle, Remote Hand Wheel, Swarf Auger, Through Spindle Coolant, USB Port Control HAAS Machine Dimensions 2811 x 2463 x 2583mm Machine Weight 2427kg Max & Min distance from table to spindle 152 - 546mm Maximum Cutting Feedrate 30.5m/minute Maximum Tapping Capacity M12 (Aluminium) Maximum Tool Diameter 64mm Maximum Tool Diameter with Empty Adjacent Pockets 64mm Maximum Tool Length 178mm Maximum workpiece weight 113kg Memory 1Gb Rapid Feedrates 61m/minute Psdpsydil Nefx Aa Degg Spindle Motor Power 40HP Spindle Speed 15000rpm T- Slots 3 x 16mm Table Size 864 x 381mm Tool Change Capacity 18 + 1 Tool Change Time (Chip to Chip) 1.6 seconds Tool Size BT40 Traverses XYZ 711 x 406 x 394mm

Condition: ready for operation (used), Year of construction: 2007, Make: HURCO Type of machine: VMX30 Year of manufacture: 2007 Pgedpfx Aaoydd Skj Deg Control system: WinMax Tool holder: SK 40 x-travel: 760 mm y-travel: 510 mm z-travel: 610 mm Speed range: 10.000 U/min max. Table load: ca. 750 kg Table dimensions: 1.000 × 500 mm Number of tools in the magazine: 24 Pl.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 3,857 h, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP P200M, spindle speed (max.): 15,000 rpm, spindle motor power: 22,000 W, number of axes: 5, This 5-axis Okuma MU-400V was manufactured in 2006. It features a spindle drive of 15,000 rpm, a 32-position tool changer, and an internal coolant supply at 15 bar. The machine includes a dual screw chip conveyor, tool breakage monitoring, and an Okuma OSP P200M control system. Ideal for complex machining tasks with its robust 5-axis capability and high-speed operations. Contact us for more information about this machine. Technical Specification Pgsdpfx Aaeydcdfo Deg Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 700 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 550 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this ready-to-use Mas Kovosvit MCU 630 in Germany, marketed as a vertical machining center, year of manufacture 2008. In Germany, this 5-axis milling machine was sold under the name Wemas VZU 630 SA. Manufacturer: Mas Kovosvit MZU / 630 Wemas Pgsdpfjycwl Iex Aa Dsg Model: MZU 630 / VZU 630/SR Year of manufacture: 2008 Condition: ready for use Category ID: 1451 Type ID: 4156 Machine type: vertical machining center Price is ex-works, excluding packaging. The price is net plus statutory VAT, ex location, excluding transport insurance and packaging, and is offered without any warranty. Terms of payment: strictly net, payable prior to loading. We reserve the right to correct any errors in the technical data. The machine should be inspected in advance. The scope of accessories is limited exclusively to what is described in the article description. There is explicitly no claim to any accessories shown for illustration purposes, unless expressly stated. If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2015, Machine type: 5-Axis Machining Centre (Simultaneous) Year of manufacture: 2015 Control: HAAS CNC control to DIN 66025 X-axis travel: 762 mm Y-axis travel: 508 mm Z-axis travel: 508 mm Max. spindle speed: 15,000 rpm Spindle motor power: 22.4 kW (vector drive) Spindle taper: SK 40 (DIN 69871) Max. torque: 122 Nm (at 2,000 rpm) Table dimensions: ∅ 630 x 500 mm Max. workpiece weight: 300 kg Number of simultaneously controlled axes: 5 C-axis rotation range: 360° continuous B-axis swivel range: -35° / +110° Rapid traverse rates (X, Y, Z): 30.5 m/min Tool magazine (positions): 40+1 (side-mounted) Coolant system capacity: 284 litres Machine weight: approx. 8.2 t Cooling systems: - Through-Spindle Coolant (TSC), 21 bar - Programmable coolant nozzle (P-COOL) - Additional coolant filtration system (25 μm) - Hand rinsing gun with coolant Measuring and probing systems: - RENISHAW probing system (WIPS-R) - Work probe - Tool measurement system Chip management: - Hinged belt chip conveyor Pgsdpfx Ajycuiqea Dsg Software & Control: - High-Speed Machining (HSM) - Ethernet interface - Macros - Coordinate rotation and scaling

Condition: ready for operation (used), Year of construction: 2001, operating hours: 6,707 h, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 653 mm, controller manufacturer: SIEMENS, number of axes: 3, This 3-axis MIKRON VCE 750 was manufactured in 2001. It features a table size of 914 × 356 mm, with X-axis travel of 762 mm, Y-axis travel of 406 mm, and Z-axis travel of 653 mm. If you are looking to get high-quality milling capabilities, consider the MIKRON VCE 750 machine we have for sale. Contact us for further details regarding this machine. Podpfxsych Rno Aa Degg • Table size: 914 × 356 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,734 h, functionality: fully functional, machine/vehicle number: MV-0090-000559, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, torque: 117 Nm, controller manufacturer: Fanuc, total height: 2,500 mm, total length: 3,600 mm, total width: 2,500 mm, table width: 1,000 mm, table length: 450 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Used DOOSAN DNM4500. In great working order. Renishaw probe system OMP 60 Pedpfoyccryox Aa Dogg

Condition: used, Year of construction: 2016, x-travel 762 mm y-travel 406 mm Pgjdpfxoyb S Ino Aa Djg z-travel 508 mm control Haas

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Integrated 4th and 5th axis Direct measuring system for A and C axes Pgsdpfsyba Dqex Aa Djg Coolant system Spindle cooler 40-position tool changer Through-spindle coolant (IKZ) 5-axis simultaneous programming and machining Machine operating time: 2163 hours Further technical details available on request.

Condition: good (used), Year of construction: 2018, 1 used 3-axis CNC machining centre, make HURCO, model VMX 84 I, year 2018, S/N S84916201C8FFBCA, XYZ travels 2,135x865x762 mm, max. spindle speed 12,000 rpm, 90-position tool changer, machine weight approx. 17,570 kg, mobile operator platform, chip conveyor, coolant unit. Pgedeya Up Sepfx Aa Djg

Condition: excellent (used), Year of construction: 2019, operating hours: 5,500 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Siemens, controller model: Sinumerik 840 D, table width: 410 mm, table length: 900 mm, table load: 350 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 12,000 rpm, overall weight: 4,000 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 12,000 rpm, number of spindles: 1, number of slots in tool magazine: 24, Vertical machining center Spinner VC 750 from training facility Year of manufacture: 2019 Control: Sinumerik 840D Technical specifications Spindle speed: 10 - 12,000 rpm Pgjdpfxeya H Tce Aa Dsg Drive power: 11/17 kW Tool holder: SK 40 Number of magazine positions: 24 Table size: 900 x 410 mm Travel distances: X-axis: 750 mm Y-axis: 460 mm Z-axis: 460 mm Equipment: Electronic handwheel Coolant system (KSS) Chip conveyor Prepared for 3D probe – receiver available

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table load: 400 kg, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis: 760 mm Y-axis: 400 mm Z-axis: 400 mm Table size: 1,020 x 410 mm Max. table load: 400 kg Spindle speed: 8,000 rpm Tool holder: CAT 40 / BT 40 Tool changer: 20 positions Accuracy Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm MACHINE DETAILS Control: MAZATROL M-PLUS EQUIPMENT Robust construction Fully hydraulic table Stable cast iron structure Suitable for aluminium, steel and plastics User-friendly programming Integrated simulation and diagnostic software Regularly serviced Coolant and lubrication systems intact Pgedpeya Dw Sefx Aa Deg

Condition: used, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, Machine parameters: Travels in X, Y, Z axes: 1270 x 660 x 610 mm Table clamping area: 1500 x 660 mm Description: The machine is in good technical condition. Testing is possible by prior arrangement. Supported systems: MAX4 with WinMax v8, control language completely in Czech. 3D simulation: Yes. Programming type: Dialog and NC. TABLE Table dimensions: 1,500 x 660 mm T-slots: 6 x 18 mm Maximum table load: 1,350 kg Distance from spindle nose to table: 150 - 760 mm TRAVELS X axis: 1,270 mm Y axis: 660 mm Z axis: 610 mm A axis: 360 SPINDLE Maximum spindle speed: 12,000 rpm Spindle power: 18 kW Torque: 237 Nm Spindle taper: SK 40 TOOL MAGAZINE Number of tools: 40 Max. tool diameter: 75 / 125 mm Max. tool weight: 7 kg FEED Rapid traverse X/Y/Z: 30 / 30 / 20 m/min Working feed X/Y/Z: 15 m/min Pgjdpeyarahjfx Aa Dsg ADDITIONAL MACHINE DATA Dimensions (W x D x H): 3,250 x 2,220 x 2,950 mm Weight: 9,400 kg

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, spindle speed (min.): 16,000 rpm, 4 pcs CNC Brother model S500X1/S700X1. Year of manufacture: 2012, 2013 and 2014. Podpfx Aasyap R Do Djgg

Condition: refurbished (used), Year of construction: 2005, operating hours: 14,923 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 305 mm, feed length X-axis: 762 mm, feed length Y-axis: 406 mm, feed length Z-axis: 305 mm, torque: 45 Nm, controller manufacturer: Haas, total height: 2,700 mm, total length: 2,200 mm, total width: 1,750 mm, table width: 267 mm, table length: 1,213 mm, rotational speed (max.): 6,000 rpm, overall weight: 1,315 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, spindle nose: CT40/ISO/BT40, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Three-axis vertical CNC milling machine Haas TM-1HE, numerically controlled, with a 6000 rpm spindle. The machine is being sold by Haas service technicians with 10 years of experience. The machining center has undergone a complete, comprehensive inspection; it has been refurbished and is ready for operation. The mill is equipped with a range of additional options: - Higher-speed spindle up to 6000 rpm Pgodpfx Aajyanlaj Djg - Rigid tapping - Rotation & scaling - M19 spindle orientation - Macro programming - HSM (High Speed Machining) - IPS (Intuitive Programming System) - Possibility to activate 4th axis after adding servo amplifier and wiring; can be sold separately (fourth axis option) - Air coolant system Machine Information: - Machine type: Three-axis vertical milling machine Haas TM-1 - Serial number: 41246 - Manufacturing date: 04/05 - Spindle speed: 6000 rpm - X-axis travel: 762 mm - Y-axis travel: 406 mm - Z-axis travel: 305 mm - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 507 mm - Table size: 1213 × 267 mm - T-slots: 3 slots, 16 mm wide - Overall dimensions (W × D × H): 220 × 175 × 270 cm - Weight: 1315 kg - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm - Spindle taper: CT40 / ISO / BT40 - Voltage: 366/425 V - Phase: 3 - Full load current: 13 A - Frequency: 50/60 Hz - Largest load current: 16 A The machine has undergone a full, comprehensive inspection. All of the following components have been checked and verified: - Ballscrews - Linear guides and ways - Lubrication system - Spindle assembly - Spindle motor - Encoder - Vector drive - Servo amplifiers - I/O board - Processor board - All electrical cabinet components - Axis drives - Tool change system - CNC controller - Additional subsystems and components The machine is fully refurbished and ready for immediate operation.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis HAAS UMC 750SS vertical machining center was manufactured in 2015. It features a spindle speed of 15,000 rpm, a CT 40 cone type, and a tool magazine with 40 + 1 places. Additional features include internal cooling and a chip conveyor. A great opportunity to buy this HAAS UMC 750SS vertical machining center. Contact us for further details regarding this vertical machining center. Extra Information Machine still under power Psdpfx Aeyalkmea Djgg Technical Specification Through-spindle Coolant Yes