Tlh Oü

Condition: used, Used Heat and Control NC-3006 Oil Roaster continuous nut fryer with capacity 600 kg/hour, made in 2011, installed 2013 and last used in 2014. Cpsdpjyhc Rasfx Afpou Major equipment includes fryer (max temperature 200 degrees Celsius with positioning conveyor, main conveyor, sediment conveyor), oil storage tank, plate heat exchanger, oil filter, mixing tank, control system. 'The Oil Roaster continuous nut fryer is specially designed for low oil volume, precise temperature control and clean operation for every type of nut process: Peanuts, Almonds, Sunflower meats, cashews, honey-roasted, and more.'

Condition: used, Little used ethanol / alcohol dehydration plant manufactured in Spain in 2015 with capacity 90,000 litres/day of minimum concentration 99.8 ºGL alcohol suitable for use as biofuel. Raw material should be distilled alcohol with a minimum concentration of 95.5 ºGL. Major equipment includes: - (2) Molecular sieves; (2) vertical shell & tube heat exchangers; (4) horizontal shell and tube heat exchangers; alcohol evaporator; (2) plate heat exchangers; column; (2) process tanks; pumps and motors; instrumentation, controls and valves; steam boiler. Codeyhc Ixjpfx Afpopu Process description available on request.

Condition: used, Used Heat & Control pellet frying and seasoning line made in 1992 with capacity of approximately 450 kg/hour. Used for corn chips, pellets, snacks. Main equipment includes: - Hopper and feed conveyor - Heat and Control fryer with deoiling belt Cedpsyhc H Uefx Afpepu - Flavour drum - Gas powered oil heater and oil pump. More information to follow.

Year of construction: 2010, condition: good (used), functionality: fully functional, 1 x Nimo KG / Unitech barrel tipper with chute. Model - SKV 300 C2. Codpfx Aeyg R N Iefpepu Serial no - 11117. Date of manufacture - 2010. Tipping height - 1600mm high. Maximum load - 250 kg. Electrical requirements - 380-400 V / 50 hz / 3 phase. Power - 2.7 A. Overall dimensions - 1000mm long x 730mm wide x 2200mm high (2500mm when tipping).

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Loma IQ2 metal detector. Perfetcly Working, ready to use. Cpjdpoygqx Aefx Afpju Located Locally in Hungary (EU).

Year of construction: 2001, condition: used, functionality: fully functional, Safeline metal detector. Cpodpjygqwfjfx Afpeu Perfectly working, ready to use.

Year of construction: 2017, condition: used, Manufacturer: Contifrac sprl Model: CDS-161205 Year: 2017 Type: Deodorizer Condition: new, never used. Document : CDS-P& Installation consisting of: - A horizontal cylindrical deodorizer with a shallow bed divided into two horizontal compartments, supported by two supports and offering the possibility of treating either 250 kg in one compartment or 500 kg in two compartments. - A horizontal buffer tank equipped with a product inlet/outlet, a vacuum outlet, and a sight glass. Volume: +/- 460 liters. - 2 tubular heat exchangers - 1 electric heater - 2 electric heating elements - Other equipment: control and metering valves, flow meter, steam drying ramp, etc. - Electrical cabinet Materials: all parts in contact with the product are made of 304L and 316L stainless steel. Insulation: 100 mm rock wool. Documentation and diagram available. Capacity: deodorization temperature 180°C (200°C max.) Cpodpfx Afsyga U Tspou Batch: 250 kg or 500 kg (2 x 250) Process: heating the product under vacuum + steam injection.

Condition: like new (used), Its function is to place metal and glass containers into baskets for sterilisation. The containers arrive from the packaging or filling process and are stored in the machine’s accumulation chamber. The machine positions them inside the sterilisation cage layer by layer using plastic dividers. These dividers are fed and positioned manually. The sterilisation cages have a movable base to allow containers to be placed inside and for the height to be lowered, forming successive layers until the cage is full. INCLUDES: - Scissor lift with hydraulic pump. - Storage compartment with a useful width of 1,000 mm. Cpjdpfx Asyf Awujfpsu - The dimensions of the cages are: - Overall dimensions: 1 m x 0.83 m x 1.08 m (length x width x height) - Usable dimensions: 0.81 m x 0.765 m x 0.75 m (length x width x height)

Year of construction: 2019, condition: ready for operation (used), A Pulsotronic metal detector for liquid and pasty products in pipeline systems is available. Pipe diameter: 100mm, max. operating pressure: 10bar, max. operating temperature: 80°C, version: EX. Machine dimensions X/Y/Z: 1250mm/550mm/700mm, weight: approx. 50kg. On site inspection is possible. Csdpfx Afeyfv Nwjpepu

Condition: good (used), Stainless Steel 90 degree conveyor belt Material: Compeltely stainless steel Belt Width: 400 mm Machine Dimensions LxWxH: 2.050x900x800 mm (height adjustable) Machine Weight: 250 kg. Cpodpfx Aoyfd Uhefpeu

Year of construction: 2012, condition: good (used), Derichs Stainless Steel screw conveyor Screw conveyors are used to meter or convey product horizontally up to approximately 7 m or vertically up to 3 m. Depending on the application, either enclosed tubular screw conveyors or trough screw conveyors are used. The advantage of trough screw conveyors is that the trough lids can be opened for cleaning. The bulk material is given into the conveyor through the inlet. There it is conveyed by the screw spirals to the outlet. In the case of dosing and weighing processes, the drive is generally controlled by a frequency converter in order to achieve a coarse and finest flow, which allows a weight-accurate dosing. In order to prevent product trickling at the outlet an optional pneumatically operated outlet flap can be installed. Manufacturer: Derichs Model: FMS-T-400 Year: 2012 Screw Diameter: 400 mm Screw Length: 4.660 mm Power: 5,5 kW / 50Hz Capacity: 80 m3/h Motor Speed: 43U/min Csdjyc Tt Ujpfx Afpjpu Machine Dimensions LxWxH: 5.800x700x530

Condition: excellent (used), Mayonnaise production line. The machine is ready for operation. Cpsdpfx Afjyc E Nzepou

Condition: excellent (used), functionality: fully functional, Dispenser/Dosing Unit made of stainless steel Cedpfjycl Iwox Afpepu Overall dimensions: 1600 x 600 x 1900 mm Included equipment: 4 pneumatic dosing heads Height-adjustable base The dosing unit is designed for precise dispensing of products in production processes. Equipped with four pneumatic dosing heads, it enables simultaneous portioning of several product streams, significantly increasing the efficiency and repeatability of dosing operations in processing lines. The device is mounted on a height-adjustable base, facilitating adaptation to various types of workplaces and integration with other machines in packaging or filling processes. The pneumatic dispensers operate using air pressure, allowing for precise and hygienic dosing of products with different consistencies, commonly used in the food, cosmetic, or chemical industries.

Condition: used, With this offer, you are purchasing a used ‘Sielaff SÜ 2020’ vending machine. Item for sale: 1 x Sielaff / Selecta SÜ 2020 with the following features: 5 selection levels Includes coin slot Condition: This offer is for a used machine, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally. Cjdpfxeyamzge Afpspu

Condition: used, Velcorin dosing system for cold sterilization. Manufactured by DMT Service, reliable dosing to ensure microbiological safety in beverages. Ideal for integration into existing filling lines. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call! Additional title: Cold disinfection Codpfsx T Az Dex Afpopu

Year of construction: 2017, condition: ready for operation (used), A complete system for the comminution of frozen cheese blocks is available. 1) Lifting device Karl Schnell 605, use: lifting of transport trolleys, max. trolley volume: 300l, lifting height: 2380mm, lifting force: 3500N, lifting speed: 4.5m/min, machine dimensions X/Y/Z: approx. 3800mm/600mm/800mm, weight: approx. 600kg. 2) Frozen block shredder Karl Schnell 487, inlet height: 2485mm, outlet height: 737mm, opening width: 680mm, tooth width: 44mm, speed: 65rpm, motor power: 30kW, machine dimensions X/Y/Z: approx. 1800mm/1400mm/2700mm, weight: approx. 2100kg. Documentation available. On-site inspection is possible. Cpodex S Rb Nepfx Afpsu

Condition: like new (used), Shrink tunnel for shrink wrapping the product once it has been wrapped in plastic. Shrink wrapping is achieved by means of hot air passing through electrical resistances by means of a turbine. The air temperature can be regulated using the corresponding controller, while the airflow rate is adjusted using the levers on the front panel, and the conveyor speed is regulated by the mechanical variator integrated in the gearbox. Codpfx Asx S I Nwefpopu At the tunnel exit, the packages are cooled by means of an integrated fan. Production may vary depending on the product and formats to be shrink wrapped.

Condition: like new (used), Closing machine for glass jars with TWIST-OFF and PT type closing system. Also suitable for PET jars with Twist Off lids, depending on the quality and rigidity of the jar. Equipment capable of closing 130 jars per minute. Fully equipped to seal all sizes and formats of containers and lids commonly used in food processing (jars, cans, bottles, etc.) without the need for additional tools or accessories, from mini-dose containers to gallon containers. Output may vary depending on the format. Csdpfex S Itcex Afpjpu

Condition: like new (used), Internal dimensions: Length: 6.90 m Equipped with: * Shower units * 2 smoke extractors, each powered with 0.25 hp * 2 washing pumps * 3 water tanks * 1 filter Can wash with cold or hot water. Cpedpfsx S Ht Usx Afpeu

Condition: like new (used), THE FUNCTION OF THE PASTEURIZER-COOLER IS TO PASTEURIZE THE PRODUCT DURING THE INITIAL PHASE OF THE PROCESS, AND THEN TO GRADUALLY COOL IT THROUGHOUT THE REMAINDER OF THE PROCESS. THE MACHINE INCLUDES: - 3 BASINS AND 3 CENTRIFUGAL PUMPS: Useful dimensions: - Basin 1: 2.44 m x 1.35 m x 0.53 m - Basin 2: 2.32 m x 1.35 m x 0.53 m - Basin 3: 2.32 m x 1.35 m x 0.53 m - Modular belt infeed conveyor: 5.20 m (length) - Modular belt outfeed conveyor: 4.35 m (length). Cpsdpsx S Hpcefx Afpeu

Condition: like new (used), Designed to snip green beans. Throughput is subject to the variety and dimensions of the product. Loading height: 1.60 m Unloading height: 1.35 m Cpedpfx Aox S Ezdofpju Drum width: 80 cm Drum length: 2.20 m Exit diameter: 57 cm

Year of construction: 2015, condition: used, MultiWeigh MW 16 Head Combination Weigher – High Accuracy | Fully Complete | High speed machine with memory buckets We offer this MultiWeigh MW 16-head combination weigher, manufactured by HD-Wiegetechnik Sondermaschinen GmbH (Germany). MultiWeigh is globally recognized for precision weighing technology, reliability, and long service life in the food processing industry. This machine is fully complete, in good working condition, and supplied including collecting chute, making it ready for immediate production use. Technical Specifications - Manufacturer: MultiWeigh (HD-Wiegetechnik Sondermaschinen GmbH) - Machine Type: MW 16 2.01 57° 3 MIX - Number of Weighing Heads: 16 with memory buckets (high speed) - Control System: IPC 511 - Scale Interval (d): 1.0 g - Scale Interval (dw): 5.0 g - Operating Temperature Range: 0 – 45 °C - Year of Manufacture: Certification: CE marked ----- Capacity (depending on product & target weight) - Up to ±120 weighments per minute - High speed and accuracy depending on: Typical products include: - Meat & poultry portions - Cheese blocks or cubes - Frozen IQF products - Snacks & confectionery - Fresh and processed food products ----- Condition & Scope of Supply - Good working condition - Fully complete - Supplied with collecting chute - Robust stainless-steel construction - Easy to clean and maintain - Suitable for integration into existing packaging lines ----- Key Advantages - Proven German engineering - High weighing accuracy - Flexible for a wide range of products - Reliable IPC-based control system - Ideal for food processors seeking performance and durability ----- Availability - Available directly from stock - Machine can be inspected under power by appointment - Worldwide delivery possible Cpedpfx Afox Synfopou Offered by STC Food Solutions – Used Food Processing & Packaging Machinery Contact us for pricing, lead time, videos, or additional technical information. ----- Keywords MultiWeigh combination weigher, MultiWeigh MW 16, 16 head weigher, used multihead weigher, food weighing machine, combination scale, packaging line weigher, German multihead weigher, meat weighing machine, cheese weigher * Manufacturer: MultiWeigh (HD-Wiegetechnik Sondermaschinen GmbH) * Year of Manufacture: / * Certification: CE marked

Condition: like new (used), functionality: fully functional, Year of construction: 2017, control type: PLC-controlled, degree of automation: automatic, actuation type: pneumatic, input voltage: 230 V, input current: 9 A, input frequency: 50 Hz, compressed air connection: 5.5 bar, overall weight: 839 kg, We offer this near-new Eagle Pack 430 Pro X-Ray inspection machine, year of manufacture 2017. Cpodpfx Afjx Sv Dvepou Air supply: 80 psi Voltage: 230 VAC 1~ Current: 9.2 A Frequency: 50/60 Hz Fuse: 15 A Protection class: IP65 Weight: 839 kg SCCR: 5000 A Document number: E178741 Drawing number: 28320776 Production date: March 2017 The machine uses X-ray detection to identify all foreign bodies in foodstuffs, such as metals, stones, etc., and automatically removes them from your product. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Eagle Pro Pack 240 PRO – Advanced X-Ray Inspection for Packaged Products The Eagle Pro Pack 240 PRO is a high-performance X-ray inspection system designed for maximum product safety, quality assurance, and production efficiency. Ideal for food, pet food, pharmaceutical, and consumer goods applications, this system combines cutting-edge detection technology with robust industrial design. ----- Key Features & Benefits - Reliable detection of foreign contaminants, even in dense or metallized packaging - Multiple quality checks in a single inspection - High inspection accuracy at high production speeds - Hygienic, stainless-steel construction for demanding production environments Technical Specifications Inspection Area - Maximum inspection width: up to 242 mm - Maximum inspection height: up to 101 mm - Conveyor width: approximately 298 mm Detection Capabilities - Detection of metal, glass, stone, mineral bone, and dense plastics - Product integrity checks: - Missing or broken items - Shape and position verification - Fill level and mass/weight control (2-, 3- or 5-zone analysis) X-Ray Technology - Detector resolution: - Up to 0.4 mm (PXT™ dual-energy) - 1.2 mm single-energy Software & Controls - 15” full-color touchscreen HMI - Eagle SimulTask™ PRO image processing software - Windows 10 Enterprise operating system - Remote diagnostics via TeamViewer™ Conveyor & Speed - Variable belt speed: 17 – 114 m/min, depending on configuration and product Connectivity - USB 2.0 - Ethernet 10/100/1000 - Optional EtherNet/IP Fieldbus integration Construction & Safety - Hygienic stainless-steel design (IP65/IP66 optional) - Low radiation emission: < 1 µSv/h - Compliant with international X-ray and electrical safety standards (CE / FDA) Operating Conditions - Operating temperature: 0 – 40 °C - Power supply: 230 V AC, 50/60 Hz, single phase Why Choose the Eagle Pro Pack 240 PRO? - Superior detection performance Codpfx Afox Srn Repspu - Increased production uptime - Reduced false rejects - Designed for modern, high-speed production lines

Condition: used, Year of construction: 2007, Manufacturer: Mettler Toledo Garvens GmbH (Germany) Model: XS 2 Type: Checkweigher Year of manufacture: 2007 Maximum weighing capacity: 300 g Minimum weighing capacity: 5 g Accuracy (e): 0.1 g Readability (d): 0.1 g Maximum tare (T+): 270 g Cpjdpfxox R Dy Ns Afpsu Accuracy class: XIII (1) Maximum conveyor speed: 20 m/min Maximum throughput: 60 pcs/min Operating temperature range: 0 °C to +40 °C Pneumatic pressure: 500 kPa (≈ 5 bar) Conveyor length: 800 mm Belt width: 100 mm Pneumatic rejection: blower nozzle HMI interface: color touch screen, real-time control and monitoring USB port: Data / printer