Global Home Improvements

Condition: used, PSW Industrial Spray Booths / Paint Line with Conveyor, Extraction & Wash Chamber – Used Description: A substantial PSW industrial spray booth / paint spray line system, suitable for coating, spraying and finishing applications. The installation includes enclosed blue spray booth sections, overhead conveyor track, extraction/ventilation units, ducting, filtration and wash chamber equipment. This is a robust, heavy-duty industrial setup formerly used in a production environment. PSW Spray booths system includes associated air handling/extraction equipment, control panels, compressed-air filtration/regulation, spray area sections and conveyor hangers. The system would suit a buyer looking for a complete used spray booth installation for refurbishment, relocation, spares, or re-commissioning subject to inspection and compliance checks. Key features: PSW Spray booths industrial spray booth system Dedpfx Aoy Rflysa Nekl Enclosed booth sections with access/opening points Overhead conveyor rail with multiple hanging brackets Extraction / ventilation units and ductwork included Wash chamber section Air filtration / compressed air regulation equipment Control panels and gauges present Large-capacity industrial construction Suitable for paint, coating or finishing operations Available for removal from site Details: Manufacturer: PSW Spray booths Type: Industrial spray booth / spray line system Water wash / washing chamber indicated Tank capacity plate show approximately 900 litres Spray booth number 051479 Rinse aid solution Condition: Used industrial equipment. The booths are currently installed and complete, but they have been idle and should be inspected by the purchaser. There are signs of normal industrial use, overspray, paint wear and age-related cosmetic marks. Sold as seen, with no warranty implied unless otherwise agreed.

Condition: used, machine/vehicle number: Model TS170, power: 50 kW (67.98 HP), input voltage: 240 V, heating capacity: 50 kW (67.98 HP), L.B. WHITE PREMIER 170 INDUSTRIAL HEATER – INDIRECT FIRED – 49kW L.B. White Premier 170 industrial heater (Model TS170). High-output indirect-fired unit producing clean, dry heated air – ideal for construction sites, workshops, drying, or temporary heating. Specs: Approx. 50kW output (170,000 BTU) Propane gas 240V single phase Dkedpfx Aasy Rfd Nj Njl High airflow unit (industrial capacity) Condition: Good used condition Sold as seen Uses: Site heating Drying plaster / concrete Warehouse heating Marquees / temporary structures Message for more details or video of it running.

Condition: used, Year of construction: 1991, functionality: fully functional, For Sale – MICROPEEN Scale / Shot Blasting System MICROPEEN MPS 4-200-1S Overhead Rail Shot Blasting System / Scale Removal System with Filter Unit Description For sale is a used MICROPEEN overhead rail shot blasting system / scale removal system, including filter unit, control panel, and workpiece suspensions. This system is ideally suited for: - Scale removal - Cleaning - Rust removal - Surface treatment of steel components - Series and single part processing Dedpfxoy N Tbmo Aa Nekl Workpieces are conveyed into the blasting cabin via an overhead rail system. An integrated extraction and filter unit is also part of the system. The machine comes from an industrial environment and is available immediately. Technical Data Manufacturer: MICROPEEN BENELUX B.V. Model: Sa Year of manufacture: 12/1991 Compressed air: 7 bar Voltage: 380/24 V System type: Overhead Rail Shot Blasting / Scale Removal System Equipment • Blasting cabin • Overhead rail system • Filter unit / extraction • Control panel • Pneumatic system • Workpiece carriers / hooks Condition • Used • Fully functional condition • Condition as shown in photos • Viewing by appointment possible • Immediately available Price €10,500 net negotiable Location Germany Search terms Shot blasting system, scale removal system, shot blasting machine, overhead rail shot blasting, sand blasting system, surface treatment, MICROPEEN, steel cleaning, shot peening Short version for platforms MICROPEEN MPS 4-200-1S Shot Blasting System Used overhead rail shot blasting system with filter system and control panel. - Year: 1991 - Compressed air: 7 bar - 380/24 V - Complete system - Immediately available Price: €10,500 net negotiable Ideal for descale and cleaning of steel components. Condition as shown in photos.

Condition: ready for operation (used), Electrician workbench ESD workstation - Dimensions: 2100/900/780 mm - Conductive worktop with Anka-Plast coating Dkodpoy N Sgzofx Aa Nol - Suitable for workplaces where electrostatically sensitive components and modules are handled - Discharge resistance: according to DIN 51953 Self-collection in Eindhoven / 23 units available from June

Year of construction: 2018, condition: ready for operation (used), 28mm alaska cap moulds 32 cavity husky system hot runner for sale Djdpfxoy N Rnwj Aa Njkl

Condition: used, Year of construction: 2016, operating hours: 10,000 h, machine/vehicle number: 978002, input voltage: 230 V, total width: 580 mm, total length: 580 mm, total height: 2,600 mm, noise level: 72 dB, space requirement height: 900 mm, suction capacity: 1,600 m³/h, power: 1.1 kW (1.50 HP), input frequency: 50 Hz, input current: 7 A, We offer this used TEKA Filtoo welding fume extraction unit, year of manufacture 2016. Item number: 978002 Power: 1.1 kW Voltage: 230 V Frequency: 50 Hz Current: 7.0 A Serial number: P26012210011016 Year of manufacture: 2016 Dkodjy N I Rvspfx Aa Nel If you have any questions or require further information, please do not hesitate to send us a message or give us a call.

Condition: used, Year of construction: 1987, functionality: fully functional, feed length X-axis: 218 mm, feed length Y-axis: 218 mm, feed length Z-axis: 116 mm, For sale: fully functional CNC wire cutting machine for foam, Italian brand DB. Table size: 218cm x 218cm, maximum block height: 116cm. Dksdsy N A Rwjpfx Aa Nol

Condition: like new (used), Atlas Copco / Scheugenpflug The entire system is unused and in like-new condition Model: VDS P6030 Automatic processing of a complete cycle from loading to unloading Mixing of two components (e.g., resin and hardener) directly in-process Precise application of material at defined positions on the workpiece Component handling via a 3-axis system (X, Y, Z) Operation in automatic, semi-automatic, and manual modes Technical data: Power supply: 400 V AC, 50/60 Hz Rated current: 13.6 A Power consumption: 8.5 kVA Fusing: 3 × 32 A Control voltage: 24 V DC Operating pressure: 6 bar Pressure monitoring: 4 bar Compressed air connection: 6 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10% to 85% (non-condensing) Control cabinet protection class: IP21 Foundation slope: max. 0.05% Clearance around machine: 0.8 m Clearance in front of control cabinet: 1.2 m Width: 1660 mm x Height: 2305 mm x Depth: 1315 mm Weight: 600 kg Sound pressure level: ≤ 70 dB(A) Model: A310 Technical data: Tank volume: 60 l resin and 20 l hardener Agitator in each tank Vacuum sensor for each tank Level sensors including overfill protection Suction valve per tank Sight glass with illumination Vacuum degassing directly in tank Material circulation to prevent sedimentation Optional tank heating Dodey Naf Eepfx Aa Nskl Pneumatically driven piston pumps Delivery volume approx. 294 cm³ per stroke 1 or 2 pumps per tank possible Continuous dosing with dual pump system Pump variants: horizontal and vertical, suitable for highly viscous materials Vacuum generation via vacuum pump or ejector Oil separator to protect vacuum pump Control via SCP touch panel Operating modes: Automatic, pause, external control Material circulation during pause mode Possible integration to external control via interface Monitoring of production time, system availability, and material consumption Calculation of remaining material availability Power supply: 230 V or 400 V AC Operation outside EU with transformer possible Operating temperature: +5 °C to +40 °C With vacuum pump: +10 °C to +40 °C Humidity: 10 to 80 percent Protection class: IP20 Dimensions: Width 700 mm x Height 1950 mm x Depth approx. 1165 mm Weight: approx. 400 kg Model: LP804 Technical data: Application: Conveying and preparation of 1K and 2K dispensing materials (low to medium viscosity, also abrasive) Tanks have 50 and 20 liter capacity Control voltage: 24 V DC Power supply: per wiring diagram Rated current: per wiring diagram Power consumption: per wiring diagram Fusing: per wiring diagram Operating pressure: 6 bar Pressure monitoring: 4 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10% to 85% (non-condensing) Control cabinet protection class: IP54 System protection class: IP20 Installation surface: max. 0.5% slope Clearance around system: 0.8 m Clearance in front of control cabinet: 1.2 m Dimensions: Width: 1500 mm x Height: 2050 mm x Depth: 770 mm Weight: 430 kg Noise level: ≤ 70 dB(A) Condition: unused Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Condition: used, functionality: unexamined, Year of construction: 2014, STM Waterjet PremiumCut 2060 Dedpfsy Ixglox Aa Njkl 5 Heads for pure water cutting Cutting Area 6000x2000 mm (Double Table System) BFT High Pressure Pumpe Hytron 40.37 (60.000 hours needs to be overhauled)

Year of construction: 2011, condition: used, Year of manufacture: May 2011 Dodpfsy Iv H Njx Aa Nokl Serial number: L177B31996J VERY NICE FORKLIFT HYSTER 2.5 TONS | 12457 HOURS.

Condition: used, Year of construction: 2004, functionality: fully functional, Grape fermenter with a capacity of 15 cubic meters (15 000 liters), in very good condition. It has a water jacket and an agitator with an electric motor. There are 4 units available, the price is for one piece. If you purchase more than one unit, price can be negotiated. Dedpfsy It Ukox Aa Nskl TECHNICAL DATA: Volume: 15 m³ (15000 liters); Type: Vertical; Material: Stainless steel, food grade; Diameter: 3100 mm; Height of the body with legs: 5000 mm; Year of production: 2004; Manufacturer: PIM-Haskovo With electric motor and agitator, Power: 4.1 kW, Electrical supply: 380/220V, 50Hz, IP54 protection Built-in thermostat and temperature control panel with a water jacket.

Condition: good (used), Year of construction: 2021, With patented MULTIFORCE end-lift system! The punching press automatically adjusts the cutting force to the size of the punching tool. It does not matter how resistant or thick the material to be cut is. Cutting table: 1,000 x 500 mm Arm reach: 370 mm Maximum cutting power: 25 t – 245 kN Dimensions: 1,000 x 1,140 x 1,710 mm Net weight (with oil): 1,020 kg Dedpfxjy Inwyo Aa Nskl

Condition: new, Hensoldt Wetzlar ZKG 7x35 Bundeswehr optical set + Dksdpfx Ajy Il Ivja Nsl

Condition: new, For sale: Professional carrying harness for self-contained breathing apparatus (SCBA) Dräger PSS 7000 • Model: PSS 7000 • Pressure gauge: up to 300 bar • Part No: 3355850 • Type No: 3355068 • Technical condition: good • Complete set of straps and buckles Dkedpfxey Ilvge Aa Nsl • Sturdy frame with no cracks Selling exactly what is shown in the photos. No cylinder or face mask included. Firefighter-grade equipment – top series from Dräger.

Year of construction: 2026, condition: new, functionality: fully functional, Maxpac currently has a container tilter in stock. The first photos show the actual machine; the last two are examples. Faster loading and unloading with minimal product loss Deliver your bulk products to the packaging line in a sustainable way The container tilt machine, or container tipper, is a simple yet robust system that enables faster loading and unloading of containers with minimal spillage. As a result, it forms a valuable addition to the packaging process. The optimized workflow from start to finish not only leads to increased productivity, but also ensures higher quality of all packaged products. The machine is PLC-controlled, allowing for even distribution of bulk materials with a continuous and consistent feed to the packaging line. This improved productivity also results in uniform product packaging and significantly reduces wastage. Dkjdjy Ick Uspfx Aa Nsl It reduces waiting times for emptying containers, ensuring packaging operations can continue seamlessly. Consequently, demurrage and detention costs decrease drastically. The risk of worker injuries is also minimized, resulting in positive impacts on several HR-related costs. The container tilting machine is adaptable to various container sizes and types, making it suitable for a broad range of packaging requirements. This allows for efficient processing and packaging of different types of bulk materials. A top recommendation for businesses seeking to achieve significant profitability gains.

Year of construction: 2008, operating hours: 25,000 h, condition: excellent (used), functionality: fully functional, construction height: 1,865 mm, nominal power: 45 kW (61.18 HP), pressure (max.): 8 bar, rotational speed (max.): 2,965 rpm, machine/vehicle number: 3887, FAD: 8.26 m3/min at 7.5 bar New oil cooler Equipped with heat recovery system KAESER Energy-Saving SIGMA PROFILE Direct drive Serviced with original parts by KAESER dealer Dkedpfx Asy H R N Nea Nsl

Condition: used, F J Edwards Ltd Sheet Metal Bender, Max Material Width 1850mm, Cast Iron Construction Dedpfx Aoy H Ifnoa Nekl Location: These lots are located in High Wycombe, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Lathe chucks and holders (VDI 30/40/50) from PLN 5/piece on request Dedpfjy H Ezgjx Aa Nskl

Condition: used, Various roller conveyors – price from 25 euros per running meter Dkedpfsy H Ey Aox Aa Njl

Condition: new, Label printers and carton sealing machines LogComp / Bedo Dkedpjy H Ex Sjfx Aa Nol

Condition: new, Oil mist filters Donaldson DMC-MMB, 7 units available / Oil mist filter Absolent A.mist10 Dksdpjy H Exfefx Aa Nsl

Condition: new, Extraction units xFUME ADVANCED/DM 4221 – Ref. No. 68 Dodpfxjy H Ewzj Aa Nekl

Condition: new, Vibratory feeders Deprag ADFS-01811-P/15 / Deprag ADFS-2-1508-1-X Dodpfxey H Ewhs Aa Nekl

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 591144, 2* galvanized compressed air receivers Including certificates Per air receiver: Design: vertical Air receiver volume: 5,000 l Max. overpressure: 11 bar Diameter: 1,400 mm Receiver height: 3,570 mm Weight: 1,050 kg Compressed air inlet connection: 2x DN 100 Compressed air outlet connection: 2x DN 100 Safety valve connection: G 2 Dsdpfx Aoy Hx Dzsa Nekl Pressure gauge set connection: G ½ Condensate drain connection: G 2½ Pressure vessel certification: RL 2014/68/EU Maintenance openings according to AD2000: 1x manhole Min. operating temperature: -10 °C Max. operating temperature: +50 °C Surface coating: galvanized

Year of construction: 2012, condition: excellent (used), functionality: fully functional, 2 x 2000L Galvanised Compressed Air Vessels Including certificates Each vessel features: Design: vertical Compressed air vessel volume: 2,000 l Max. overpressure: 11 bar Diameter: 1,150 mm Vessel height: 2,375 mm Dodpfjy Hx A Rex Aa Nskl Weight: 471 kg Compressed air inlet connection: 2x G 2½ Compressed air outlet connection: 2x G 2½ Safety valve connection: G 1 Manometer set connection: G ½ Condensate drain connection: G 2½ Vessel inspection: RL 2014/68/EU Service openings according to AD2000: 2x handhole Min. operating temperature: -10 °C Max. operating temperature: +50 °C Surface coating: galvanised