Meccanica Scipioni Macchine utensili srl

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: TO5_1, control type: CNC control, degree of automation: manual, actuation type: electric, controller manufacturer: CoastOne, controller model: Touchscreen 15", bending force (max.): 5 t, working width: 450 mm, stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, number of axes: 2, type of crowning: manual, back gauge adjustment: CNC-controlled, overall weight: 375 kg, power: 3 kW (4.08 HP), warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive TableOne 5 - CoastOne Made in Finland Pressing force: 5T Bending length: 450mm Spindles: 1 x 5T Control: TC15-2D graphic Backgauge: 1-axis controlled X-axis - R-axis manual Tool holder: Type A / R1 / ES Style / AMADA Promecam 1 set of bending tools included 36-month warranty after installation Itedeyu Uwxjpfx Abced Delivery extra; available immediately Visit under power possible anytime by appointment!

Condition: ready for operation (used), Year of construction: 2007, pressure 30.0 t chamfer lenght 800 mm back stop - adjustable max. 420 mm stroke of upper beam 100 mm dayligth 310 mm Iedpfx Ajyuzchobcjtd working feed 10.0 mm/sec return speed 12.0 mm/sec Control VISION 120 oil volume ca. 38.0 l voltage 380 V total power requirement 4.5 kW weight of the machine ca. 890 kg dimensions of the machine ca. 1250 x 950 x 1900 mm current new price approx. 24.000 euros special price on request Equipment: - electro-hydraulic NC press brake - easy to operate - UNITRONICS "VISION 120" NC control system * for press depth back gauge (Y X axis) - NC electro-motorized back gauge (X axis) * Input of target/actual value possible * 2x manually adjustable stop fingers - Operation front right - Many different insert/bending tools * Top tool holder : AMADA/PROMECAM - 1x freely movable foot switch - EMERGENCY OFF button at the front - Rear safety device - operating instructions

Condition: good (used), functionality: fully functional, Year of construction: 1999, CNC electric press brake from Safan Model: SMK 2050 40 Capacity: 2050 x 40 tons Iodpfx Abeytbxyscjtd TS1 CNC control Y1, Y2, X and R axes Pneumatic flat table Light barrier Year of manufacture: 1999

Condition: good (used), functionality: fully functional, Year of construction: 2008, Servo-electric press brake Make: TRUMPF Model: TruBend 7036 Year of manufacture: 2008 Technical Data Manufacturer: TRUMPF Model: TruBend 7036 Year built: 2008 Press force: 36 t Bending length: 1020 mm Working height approx.: 1150 mm Space required: 1805 x 1330 x 2380 mm Weight: 2,600 kg Standard Equipment - Rigid machine frame - Press beam - High-dynamic, electronic direct drive (torque motor) - Inductive length measuring system with temperature compensation - Switch cabinet air conditioning - Ergonomic machine design Optional Equipment - Tool clamping (Wila) top and bottom - Integrated TRUMPF TASC 6000 control - Safety light curtain at front - Backgauge system: 6 axes: X1, X2, R1, R2, Z1, Z2 - Comfort support table - BendGuard (with block laser) Safety - Side-swiveling safety doors - Protective rear cover - 2-button foot switch for standing and seated operation - CE marking Itsdjyr Nckspfx Abced Tooling - Lower tool EV/S-W10, V10/84°/R1, H 100 mm, L = 1000 mm, segmented - Upper tool OW200/K, offset, 86°/R1, H 100 mm, L = 1000 mm, segmented All information subject to change. A powered demonstration is always possible in our showroom.

Condition: ready for operation (used), Year of construction: 2008, number of axes: 8, overall weight: 10,500 kg, Press brake manufactured in 2008. This Warcom DINAMICA 3000x100 features a bending force of 100 tons and a bending length of 3000 mm. It is equipped with an 8-axis backgauge system and a CNC Delem DA65 control for precision operations. If you are looking to get high-quality bending capabilities, consider the Warcom DINAMICA 3000x100 machine we have for sale. Contact us for further details regarding this machine. • Condition: Overhauled • Bending force: 100 tons • Stroke: 400 mm • Axes: 8 backgauge axes (Y1, Y2, Z1, Z2, X1, X2, R, X) Itodpeyrgdfefx Abced • Crowning/Camber: Yes • CNC control: Delem DA-65 • Main motor: 11 kW • Speeds: • Approach: 200 mm/s • Working: 10 mm/s • Return: 180 mm/s Technical Specification Bending Length 1000 mm

Condition: used, Year of construction: 2011, Press capacity approx.: 360 kN Bending length approx.: 1020 mm Distance between side frames: 932 mm Effective open height: 295 mm Throat depth: 150 mm Working speed: 25 mm / sec feeding speed: 220 mm / sec Control: TASC 6000 Working hours machine: 41422 h working time jacking beam: 4713 h Length: 1805 mm Width: 1330 mm Height: 2380 mm Weight of machine approx.: 2600 mm Standard configuration Machine - Stable machine frame - Optimized in terms of deformation - Highly-dynamic electro-mechanical direct drive (torque motor) Isdpfx Ajyrf Dkobcstd - Inductive linear measurement system with temperature compensation - Switch cabinet air-conditioning- Ergonomic Machine designBack Gauge System - Highly-dynamic safety backgauge system - Gauge fingerControl - Integrated Machine controller TASC 6000 - Numerical workshop programming - Windows XPe, Pentium M with 1.1 GHz clock frequency - 1 GB RAM memory - 15 " Touch screen - Network capability - TeleserviceSafety - Safety doors, can be swung sideways - Rear cover - 2-button footswitch, for seated or standing operationOptions for ergonomy - Comfort supporting table (front)- Comfort foot rest - LED work area lighting, front - Operating unit, swivel-mounted - 1 shelf bracket and 2 document repositoriesOptions for productivity - BendGuard (with block laser) - Graphic workshop programming - Automatic tool clamps Extended machine accessories Extended Machine Accessoires Backgauge System - Backgauge system 6-axes Automation

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,740 h, number of axes: 2, pressing force: 14 t, Press brake manufactured in 2019. This FEYSAMA MCCH 6/3050 features a press force of 135 tons and a bending length of 3200 mm. It includes a programmable stroke of 160 mm and a backgauge with a stroke of 800 mm. If you are looking to get high-quality bending capabilities, consider the FEYSAMA MCCH 6/3050 press brake we have for sale. Contact us for further details. • Operating hours: 2740 • Distance between uprights: 2700 mm • Throat depth: 415 mm • Max distance ram/table: 390 mm • Programmable stroke: 160 mm • Backgauge with ball screw, stroke: 800 mm • CNC control: ESTUN E21, 2-axis (controls bending dimensions and backgauge) • Condition: Very good Additional equipment • Quick clamping tool holder • Bending punch: 120 mm height, 88° angle, segmented • Multi-V die: 95 × 95 mm, V openings 10/12/16/20/25/30/48/60 mm • 2 backgauge fingers with micrometric adjustment and manual spacing • 2 adjustable front supports Iodpfjyrb Sqsx Abcjtd • Safety light curtains • LED work area lighting • User manual, electrical and hydraulic diagrams Technical Specification Bending Length 3200 mm

Condition: new, neu ca. 12 - 14 Wochen ab Auf Slowakei 23700 € 455.04 € 40 to 800 mm X und Y Achse 100 mm 310 mm hydraulisch 38 l 6 kW Iodpfx Abeynngyscotd 1750 mm 950 mm 1900 mm 1640 kg 420 mm 1 10 mm/s 12 mm/s 40 mm/s 0.02 +/- mm 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 74800 € 1413.72 € 40 to 2050 mm Y1 / Y2 / X und R Achse 200 mm 1700 mm 350 mm 440 mm servomotorischer Spindela 180 mm/s 10 mm/s 115 mm/s 650 mm 250 mm 1000 mm 7.2 kW 2600 mm 1450 mm 2650 mm 4400 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66S - 17 " Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked Itodoynm A Hepfx Abced 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: - higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal -low energy consumption - compact motor-spindle unit with small amount of components -no hydraulic components optional equipment: Z1/Z2-axes CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 72300 € 1366.47 € 40 to 1250 mm Y1 / Y2 / X und R Achse 200 mm 1050 mm 250 mm 440 mm servomotorischer Spindela 115 mm/s 10 mm/s 115 mm/s 650 mm 250 mm 1000 mm 7.2 kW 1950 mm 1450 mm 2650 mm 3600 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66S - 17 " Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: - higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal Itodpfx Abjynm Ayjcsd -low energy consumption - compact motor-spindle unit with small amount of components -no hydraulic components optional equipment: Z1/Z2-axes CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: ready for operation (used), Year of construction: 1999, Press brake manufactured in 1999. This AMADA HFB 5020 features a maximum pressing force of 500 kN and a maximum stroke of 200 mm. With a robust machine weight of 4700 kg, it is designed for durability and efficiency. If you are looking to get high-quality pressing capabilities, consider the AMADA HFB 5020 machine we have for sale. Contact us for further details. • Maximum Pressing Force: 500 kN • Maximum Stroke: 200 mm • Dimensions of Machine (LxWxH): Not provided • Weight (kg): 4700 kg • Noise Level: < 70 dB(A) • Stopping time: 60 ms • Stopping distance: 6 mm • Rated Current: 11.4 A • Number of Phases: 3 • Voltage / Frequency: 400 V / 50 Hz (415 V / 50 Hz) Iedpfjynadwex Abcstd • Installed Power: 6 kW

Condition: good (used), functionality: fully functional, Year of construction: 2001, HACO PPM 1640 Technical condition: Good Bending length: 1600 mm Tonnage: 40T Press brake type: NC controlled Backgauge: X-axis CNC controlled, R-axis manually height adjustable Daylight: 295 mm Throat depth: 200 mm Stroke: 100 mm Control: Robosoft Motor power: 4.1 kW 380V Tooling: yes, upper tool + Multi V Itjdoym At Espfx Abcsd Tool clamping: European standard Serial number: 90646 Year of manufacture: 2001 Total length: 2100 mm Total height: 2300 mm Total depth: 1450 mm Weight: 2500 kg

Condition: excellent (used), Year of construction: 2021, Bending length: 4100 mm Press force: 240 tons Itsdoymldgopfx Abcjd Equipped with a comprehensive set of bending tools Manufacturer: Baykal Model: APHS 41240 Power supply: three-phase Year of manufacture: 2021 Serial number: 28635

Condition: used, Year of construction: 2017, TRUMPF - TRUBEND CELL 7000 - 2017 - system Siemens - including press brake TRUMPF TRUBEND 7036 - pressing force 217 kN - bending length 2x500 mm - clear passage between racks 1530 mm - useful installation height 300 mm - overhang 515 mm - BendMaster - max. workpiece size 500 mm x 380 mm Iedpfx Abeyl Strocjtd - max. workpiece weight 1.5 kg - max. payload 15 kg - min. sheet thickness 0.5 mm - max. sheet thickness 6 mm - under power 34000+ hours - manufacturing hours 18500+ - including robot

Condition: used, Year of construction: 2000, machine/vehicle number: 883512, Dimensions: 257 cm width x 220 cm depth x 242 cm height Weight: 7,900 kg Max. pressing force: 850 kN (85 tonnes) Max. bending length: 2,050 mm Distance between uprights: 1,750 mm X-axis travel: 600 mm Max. stroke: 215 mm Itodpfx Abjylh Sqecjd Controlled axes: X, Y, R, I Control system: Delem Equipment: 4 stops Condition: R-axis has correction error. R-axis reaches bottom end switch, must be manually raised (needs new referencing). Y-axis (pressure beam) sinks at an angle. Crowning: wedge-type crowning The machine is operational and in good overall condition.

Condition: used, functionality: fully functional, Year of construction: 1994, machine/vehicle number: 883050, Dimensions: 257 cm width x 220 cm depth x 242 cm height Weight: 8,320 kg Max. pressing force: 850 kN (85 tons) Max. bending length: 2,050 mm Itjdpfoylh N Nox Abcsd Distance between uprights: 1,750 mm X-axis travel: 600 mm Stroke height: 220 mm Controlled axes: X, Y, R, I Control system: Delem Equipment: 6 backgauges Condition: Technically sound, except for oil leakage Crowning: wedge-type crowning The machine is operational and in good overall condition.

Condition: good (used), Year of construction: 2000, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1100 mm stroke of upper beam 100 mm throat 195 mm working feed 10.0 mm/sec return speed 70.0 mm/sec 180 bar work height max. 840 mm table width 110 mm dayligth 295 mm Control ATL 550 total power requirement 5.5 kW weight 2500 kg range L-W-H 2100 x 1200 x 1800 mm Equipment: - NC-controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control - model "ATL 550" * Positioning of the backgauge (X axis) * Positioning of the depth adjustment (Y1 Y2 axis) * Possibility of programming different programs * Memory capacity max. 200 programs - max. 400 blocks * Swivel control panel, left front - Electro-motorized backgauge (X axis) * with 2x stop fingers, manually adjustable (R Z axis) - Tool holder system A - with top wedge crowning - Split insert/bending tools - Lateral safety guards - rear safety guard - 1x freely movable double foot switch Isdpfx Aeyk E Utobcstd - Operating instructions (PDF)

Condition: good (used), Year of construction: 2000, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1100 mm stroke of upper beam 100 mm throat 195 mm working feed 10.0 mm/sec return speed 70.0 mm/sec 180 bar work height max. 840 mm table width 110 mm dayligth 295 mm Control ATL 550 total power requirement 5.5 kW weight 2500 kg Ijdpfx Abjyk E Umscjtd range L-W-H 2100 x 1200 x 1800 mm Equipment: - NC-controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control - model "ATL 550" * Positioning of the backgauge (X axis) * Positioning of the depth adjustment (Y1 Y2 axis) * Possibility of programming different programs * Memory capacity max. 200 programs - max. 400 blocks * Swivel control panel, left front - Electro-motorized backgauge (X axis) * with 2x stop fingers, manually adjustable (R Z axis) - Tool holder system A - with top wedge crowning - Split insert/bending tools - Lateral safety guards - rear safety guard - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: used, Year of construction: 2010, We offer this used TRUMPF TruDisk 4002 (4 C) laser, year of manufacture 2010. Ijdpeyi S E Asfx Abcstd Year of manufacture: 05.2010 Weight: 850 kg Equipment number: E1053A0139 Model designation: TruDisk 4002 (4 C) Variant designation: 3300 If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2020, total length: 2,450 mm, total width: 1,900 mm, total height: 2,140 mm, Weight: 5.500 kg - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Control system brand: Delem - Control system type: DA-41s - Power [kW]: 4.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 40 Itodsyg Hhmopfx Abced - Max. working width [mm]: 2000 - Column gap [mm]: 1800 - Throat depth [mm]: 200 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 100 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 2450mm x 1900mm x 2140mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: TASK, controller model: MASTER 3AX, bending force (max.): 35 t, working width: 2,000 mm, stroke length: 100 mm, throat depth: 400 mm, distance between stands: 1,800 mm, oil tank capacity: 50 l, travel distance X-axis: 600 mm, back gauge: 600 mm, overall weight: 3,500 kg, total length: 2,700 mm, total width: 1,700 mm, total height: 2,200 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: lower tooling, upper tooling, Press brake SCHIAVI - AMADA RG 35-20 Press force: 35 tons Table: 2000 mm Complete with upper and lower dies Fully functional with 4-point motorized backgauges CE-certified machine with rear safety enclosure Operating video available. Itedeygu Uhjpfx Abcsd

Condition: good (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,238 h, Technical Data Press Force: 360 kN Bending Length: 1020 mm Useful Installation Height: 295 mm Clear Column Distance: 932 mm Throat Depth: 150 mm Working Height¹: 1150 mm Backgauge Axis Travel Values Y-axis Stroke: 120 mm X-axis Travel: 235 mm (max. backgauge area) X-direction: 500 mm R-axis Travel: 75 mm Control Basic Configuration: Ijdpoyfxfnjfx Abcetd Windows XPe, PC-based control, Pentium M 1.1 GHz, 15" Connection Values Electrical Connection approx.: 6 kVA Dimensions and Weights Required Floor Space (length × width): 1805 × 1330 mm Height: 2380 mm Weight: 2600 kg Standard Equipment of the TruBend 7036 Machine Stable Machine Frame: Welded construction, stress-relieved heat-treated for both standing and seated operation, includes two side columns, table, and crossbeam. Press Beam: Stress-relieved heat-treated, deformation-optimized. Upper Drive: Highly dynamic, electromechanical direct drive (torque motor), max. working speed of 25 mm/s (depending on selected die width and operating cycle). Inductive Length Measuring System with Temperature Compensation Control Cabinet Air Conditioning Ergonomic Machine Design Backgauge System 3-Axis Rear Backgauge System (one gauge finger): Highly dynamic, safety 3-axis rear backgauge system. Rack-and-pinion drive, CNC-controlled X, R, and Z axes freely programmable, providing a highly adjustable gauging depth and height for maximum precision. Fiberglass gauge finger with hardened metal stop. Tool Clamping Upper Tool Clamping: Enables quick and precise tool change—vertical and horizontal; fixed, self-centering. Lower Tool Clamping: Individual V-dies are placed on a special plate. Clamping: by hand, hardened clamping bar and retainer bar. Safety Safety Devices: Safety ensured by emergency stop push button, 2-button foot pedal for both standing and seated operations, laterally sliding protective doors, as well as rear and side safety guards. The side safety guards are made of transparent, impact-resistant plastic. Control TRUMPF TASC 6000: The TRUMPF TASC6000 control system is based on Windows XPe OS, with 1.1 GHz Pentium M and 15" touchscreen, USB interface, and 1 GB RAM. Optional Equipment Levels Backgauge System 6-Axis Rear Backgauge System (2 gauge fingers) Tool Clamping Tool clamping for AMADA US-Style upper tools (manual) Safety BendGuard (with block laser): Optoelectronic safety device enabling fast and safe bending. Permitted press beam speed in foot mode: 220 mm/s Control Graphical Workplace Programming

Condition: good (used), functionality: fully functional, Description: The machine is in good technical condition, with the possibility of testing upon prior agreement. 3 controlled axes – Y, X, R. Manual tool clamping. Includes tools – see the last photo. A video of the machine in operation is available. Ijdpfeych E Sex Abcstd

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 13 h, control type: CNC control, controller manufacturer: ESA, Equipment: european tool clamping system, lower tooling, safety light barrier, upper tooling, BENDING POWER 40 t Itedjyb R I Hspfx Abcjd CNC CONTROL ESA NUMBER OF AXIS 4 HOURS 13 bending length 1250 mm x axis travel 1000mm oil capacity 80 litres motor power 7.7 KW stroke 215 daylight 455 throat depth 410 table height 800 table width 60 length 2075 width 1700 height 2300 weight 3300kg With 2x stop fingers, manually adjustable (R+Z axis) 1x split set of pointed tools - top 1x rotatable Multi-V die block SAFETY Side safety device (swivel doors) FIESSLER laser safety device Rear safety device (swivel door) 1x remote double foot control 2x front support arms Operating instructions INCLUDED

Condition: new, functionality: fully functional, Year of construction: 2026, New hydraulic profile bending machine from manufacturer MAC Bending. Model: ARM45H. Optional equipment: Two speeds. Digital read-out. Rolls for pipes, angle profiles, and various other profiles. Warranty: 1 year. Delivery time: 7 weeks. Other models from the catalogue are also available, please email M2Trade. Should service be required, it will, of course, be provided by M2Trade. Thanks to its durable and reliable design, maintenance is kept to a minimum. Itjdpfx Absya T Hvocjd