TD Handel & Export UG (haftungsbeschränkt)

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 13,000 W, spindle speed (max.): 6,300 rpm, number of axes: 2, This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0–6300 rpm • C-axis on main spindleTool turret • 12-position VDI30 axial • Directional logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tools speed: 0–5000 rpmTailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tubeControl & software • SINUMERIK 828D OPERATE • SHOPTURN dialog programming Nwedpfeyffgrox Aa Dob • USB interface • Network / Ethernet • 10.4" TFT color monitor • 3D simulationMedia & machine features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • DocumentationTool measurement (E45) • Measuring arm fixed in the work area • Tool measurement on the turret • Short setup times / precise measurement / cost-efficientWorkpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jawsOther (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional equipment Bar feeder / magazine (SL1200 – as referenced) • Bar length: 850–1200 mm • Bar diameter: Ø 8–95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support area: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operating side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090–1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • DocumentationSpindle extension (for bar feeder use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reducing sleeves (3 pieces) • Required for use with SL1200Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mmHigh-pressure coolant unit • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant • Interface & softwareRobot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual operation switchingAdditional components • PC keyboard USB (QWERTY) • Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware • 4× vibration absorbers • 4× mounting brackets • 4× heavy-duty anchorsParts collection device • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt

Condition: used, Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable,

Condition: excellent (used), Year of construction: 2012,

Condition: excellent (used), The machine is in very good condition and has low operating hours. Nwedpfx Aaoydvi Io Deb

Condition: used, Technical details: operating hours: 2151 h milling spindle operating time: 2 h turning spindle switch on : 709 h swing diameter: 1000 mm turning diameter: 900 mm workpiece height max.: 800 mm control: Mazatrol Smoothg x-axis: 470 mm z-axis: 876 mm c-axis: 20 m/min tool holder / places: 12 revolution per minute: Revolver 4000 U/min workpiece weight: 3000 kg rapid power traverse in X-and Z direction: 24 m/min Nwedpsydvfcofx Aa Djb weight of the machine ca.: 14 t dimension machine xH: 3989 x 2375 x 3400 mm

Condition: excellent (used), Year of construction: 2016, operating hours: 4,850 h, DMG Mori Ecoturn 510 V3 CNC Lathe In very good condition, year of manufacture 2016. Machine specifications: Maximum spindle speed: 3250 rpm Spindle bore: 103 mm Bar capacity: 76 mm Distance between centers: 1150 mm Swing diameter over bed: 680 mm Swing diameter over carriage: 465 mm Hydraulic chuck size: 250 mm Equipped with: Nedoydvcbepfx Aa Dewb VDI40 turret with 12 stations Chip conveyor High-pressure coolant system Siemens control Hydraulic chuck Maximum machine dimensions including chip conveyor: 5320x1809x2161 mm (including signal lamp, excluding operator panel) Weight: approx. 6700 kg The machine is supplied with various holders, driven tools, turning tools, drills, and other accessories neatly stored in a tool cabinet. All manuals and electrical diagrams are also included.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, spindle speed (min.): 25 rpm, spindle speed (max.): 500 rpm, spindle bore: 79 mm, travel distance X-axis: 220 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, chuck outer diameter: 200 mm, spindle nose: 170 h5, Equipment: documentation/manual, rotational speed infinitely variable, Machine is from first owner (government institution) and is very well equipped. This CTX 400 is set up at our premises and can be inspected in operation if required. This machine comes standard with: - Chip conveyor - IFM oil mist extraction system - TurnPlus control - Collet chuck for 185E and 3-jaw chuck KH 200/68 with top jaws Nwsdjydpdxopfx Aa Dsb - Conversion kit for collet 173E - Overload clutch for X and Z axes - Double foot pedal (chuck + tailstock) - Original Gildemeister and Heidenhain documentation - Approx. 20 VDI-30 tool holders, of which 2 are driven

Condition: good (used), Year of construction: 2000, Turning diameter 200 mm Turning length 400 mm Control: SIEMENS SINUMERIC Number of spindles: 2 Tool changer: 2x 14 Total power requirement: 39 kW Nedpfxsydm Tde Aa Djwb Machine weight approx. 4,800 kg Without bar feeder, machine is integrated in automatic operation Machine is still powered. Videos of the machine's functionality are available and can be provided upon request.

Condition: ready for operation (used), Year of construction: 2004, spindle motor power: 22,000 W, spindle speed (max.): 3,800 rpm, travel distance X-axis: 190 mm, controller manufacturer: OKUMA, controller model: OSP-E100L, number of axes: 5, This 5-axis Okuma Macturn 350-W was manufactured in 2004. It features a turning diameter of 530 mm, TL of 1500 mm, and a main spindle with 80 mm diameter and 22 kW power. The machine includes a sub-spindle, 80 tools in ATC, and a B-axis with precise control. Ideal for complex turn-mill operations. If you are looking to get high-quality turning and milling capabilities, consider the Okuma Macturn 350-W machine we have for sale. Contact us for more information. • C-axis: 0.001 deg • Through-spindle coolant • Live tooling speed: 6000 rpm • Sub-spindle speed: 6000 rpm • Coolant pressure: 15 bar • Helical cutting (Macturn) • Linear scales on X and A axes • Autotool changer (ATC) capacity: 80 tools • B-axis: 0.001 deg • Main spindle: 80 mm bore, A2-8 • Sub-spindle: big bore, 5000 rpm, 15 kW • Max turning diameter: 530 mm • Turning length (TL): 1500 mm Nedeydmfgepfx Aa Dowb Additional equipment • Robot interface (Robot IF) • Autodoor • Mayfran chip conveyor, 1200 mm • Robot: ABB IRB6650, 200 kg / 2.75 m

Condition: used, Year of construction: 2001, Max Mueller MDW 20 (4) CNC Slant Bed Lathe With Siemens 840D Control Rohm Duro-NC 500/3 Ø500mm 3 Jaw Power Chuck. Maximum Turning Ø850mm. Maximum Swing Over Cross Slide Ø690mm. Maximum Turning Length 1,500mm. Centre Height 450mm. Maximum Workpiece Weight 800kg. Spindle Bore Ø128mm. Axis Travel 'X'=510mm, 'Z'=1,510mm. Rapid Traverse 'X'=10m/min, 'Z'=10m/min. Maximum Turning Speed 1,950rpm (60kW Motor). 30 Position Carousel. S/No. 504237 (2001). Nwsdpsydl Rbsfx Aa Dob With Renishaw LP2H Tool Setter, Chip Conveyor, Coolant System, Filtermist F28/8 Mist Extraction Unit, Powered Pneumatic Door, Foot Switches, Signal Tower & Manuals. Overall Dimensions L5,270 x W2,300 x H2,750mm. Weight 17,000kg. Note: Control Needs Attention, Tooling Shown In Photo's Not Included.

Condition: excellent (used), Year of construction: 1997, CNC Lathe Spinner TC67H-MC Year of manufacture: 2002 . Tailstock . Chip conveyor . High-pressure pump . Chuck . Driven tools Technical specifications: Control: Siemens 840 D X-axis travel: 221 mm Z-axis travel: 590 mm Nodpfx Aeydlugoa Djwb Turning diameter: 300 mm Turning length: 600 mm Spindle speed: 4500 rpm

Condition: used, Year of construction: 2008, Saeilo Contur TSL 500, year of manufacture 2008, Siemens 810 D control with Shop Turn, traverse X/Z 270/905 mm, 12-position turret VDI 40, live tooling, C axis, tailstock, turning length 750 mm, max. turning diameter 400 mm, spindle speed up to 3,000 rpm, three-jaw chuck, protective window with damage, drive belt should be replaced, powered on and ready for demonstration in production. Nwjdpsydln Tjfx Aa Deb

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Nwjdpfjydi Svsx Aa Dob Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: excellent (used), Year of construction: 2008, DOOSAN MX2000ST 9 AXIS MILL TURN CENTER Sub spindle and bottom Turret Nedpfx Aaoydigmj Dewb Both spindles have 200mm power chucks on at the moment but we also have a Heinbuck collet chuck available good package of tooling Shown working on our motorsport jobs all done in one! Can be demonstrated if required.

Condition: like new (used), Year of construction: 2008, operating hours: 1,800 h, functionality: fully functional, * Mori Seiki NL 2500 SY. * Equipment value included: 20,000–25,000 euros. * Year: 2008. * Only 1,800 cutting hours. * 5-axis machine. * Sub-spindle. * 12-station turret, all stations driven. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. Njdpeydhz Nefx Aa Djwb * Direct drive for live tooling: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gear steps. * Main spindle nose size: A2-8. * Sub-spindle nose size: A2-6. * Bar capacity: 80 mm. * Main spindle chuck: Kitagawa B-210, 250 mm, metric system. * Sub-spindle chuck: Kitagawa B-208, 210 mm, metric system. * Box guideways on all axes. * Main spindle speed: 4,000 rpm. * Live tool speed: 6,000 rpm. * Oil chiller for both spindles (Daikin). * Conversational automatic programming system: Mapps 4. * Automatic load control and tool consumption monitor. * Rapid traverse speed: 30 m/min on X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports: USB, PCMCIA card, and RS232. * Interface for bar feeder installation. * Automatic parts catcher. * Dual pedal for independent chuck opening/closing on main and sub-spindle. * Side-mounted chip conveyor, hinged type. * Extensive set of static and driven toolholders. * Electrical transformer. * Documentation: parts list, electrical diagrams, programming, and operation manuals. * Weight: 5,800 kg. * Machine currently in operation. * It is essential to review precision videos. * Only used for prototyping AOG (Aircraft on Ground) aerospace aluminum components. * Immediate delivery, subject to prior sale.

Condition: used, Year of construction: 2005, turning diameter 640 mm turning length 1.185 mm control SINUMERIK 840D swing diameter 640 mm distance of spindle heads 1500 mm slide I: X1 / Y1 / Z1 / B slide travel X-axis 550 mm slide travel Z-axis 180 mm Z- Travel 1.185 mm B - axis 240 ° feed x-axis 0 - 40.000 mm/min feed y- axis 1 - 24.000 mm/min Feed z- axis 1 - 70.000 mm/min feed B-axis 1 - 20 1/min rapid traverse X/Y/Z 40 / 24 / 70 m/min feed capacity X/Y/Z S6: 7,00/11,00/7,50 kN tool taper HSK 63 turning speed milling-spindle 10 - 12.000 1/min power capacity at 100 % load 13,20 kW power capacity at 40 % load 22,00 kW torque milling spindle 60 / 100 Nm no. of workpieces in the magazine 46 Stück tool length - max. 350 / 200 mm tool diameter 80 mm wotkpiece diameter with 2 vacant positions 120 mm weight of tools max. 6 / 10 kg slide II: X2 / Z2 slide travel X-axis 180 mm Z- Travel 1.050 mm feed x-axis 1 - 24.000 mm/min Feed z- axis 1 - 36.000 mm/min rapid traverse x + z axis 24 / 36 m/min feeding force S6: 11,00/9,00 kN turret (x-stations) 12 tool taper DIN 69880 Ø40 Driven tools - quantity 12 Driven tool turning speed 1 - 4.000 1/min power capacity at 100 % load 10,70 kW torque S1: 32 Nm Slide III - longitudial travel Z3 mm Nsdsydfllepfx Aa Dewb Z- Travel 1.150 mm Feed z- axis 1 - 36.000 mm/min rapid traverse Z-axis 36,00 m/min feed capacity Z - axes S6: 13,00 Nm Main spindle ISM90 turning speed main-spindle 10 - 4.000 1/min power capacity at 100 % load 36,00 kW power capacity at 40 % load 45,00 kW max. torque at 40% / 100% load 800 / 630 Nm spindle bore 80 mm turning speed opposed-spindle 10 - 5.000 1/min power capacity at 100 % load 21,00 kW power capacity at 40 % load 28,00 KW max. torque at 40% / 100% load 320 / 240 Nm spindle bore 80 mm total power requirement 70,00 kW weight of the machine ca. 20,00 t dimensions of the machine ca. 8,50 x 4,50 x H3,10 m Machine with SIEMENS SINUMERIK 840D control, main- and counter-spindle, chip conveyor, dust exhauster, DMG-automation WH10top. Main-spindle ISM90: hollow clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter-spindle ISM76: closed center clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-up device with integrated conveyor belt, automatic protective cover, differential pressure clamps. Incl. pump-frame for coolant - Pump 1: 17 l/min at 80bar - Pump 2: 20 l/min at 8bar - Pump 3: 40 l/min at 20bar Without coolant unit. Was connected to a central coolant-system. Accessories: Hainbuch collet chuck incl. collets Ø30,45,50,55,60,65,72,82,85,90 1 piece workpiece pick-up-gripper for turret

Condition: excellent (used), Year of construction: 2020, This CMZ TTL-52-52-T1Y-T2Y is a twin-spindle/twin-turret CNC turning and machining center with extensive Y-axis functionality, designed for medium-sized turned workpieces up to Ø 220 mm and with significant travel in X, Y, and Z. It supports simultaneous machining with multiple tools and features a robust construction for high-production environments. This machine is in excellent condition and has ca 8200 actual spindle hours. Cnc control Fanuc Series 31i-Model B Maximum turning capacity Ø 220 mm (turntable) Max. Permissible swing diameter Ø 240 mm Turning length (between centers) 800 mm X1/X2 axis travel 167.5 mm Nwodpfx Aeydd Tzja Dob X3 axis travel (sub-spindle) +120/–120 mm Z1/Z2 axis travel 515 mm Z3 axis sub-spindle travel 580 mm Maximum spindle speed (main/sub) 4,500 rpm Spindle bearing outer diameter 150 mm Spindle bearing inner diameter 100 mm Spindle nose (main and sub-spindle): ASA 6” (A2) X-as 30 m/min Z-as 30 m/min Y-as 20 m/min Including: Coolant through right spindle Tailstock in right spindle (Short Version) Removable tool presetter Side exit chip conveyor Irco Breuning SIMAG 50.1-R-3000 bar feeder (Y2012) AR Filtrazioni mist collector Large set (ca 50) HAINBUCH chucks Full options list in the attached document. Viewing possible upon appointment. Availability: 03/2026 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Year of construction: 2011, turning diameter over cross slide: 75 mm, turning diameter: 381 mm, spindle speed (max.): 3,500 rpm, spindle bore: 75 mm, travel distance Z-axis: 850 mm, total height: 2,325 mm, total length: 4,820 mm, total width: 2,100 mm, overall weight: 8,000 kg, CNC Lathe with Y-axis, driven tools and 2nd Spindle CNC Control Fanuc series 18i-TB Turning diameter 381 mm Spindle bore diameter 75 mm Spindle speed 3500 R/min Spindle motor 22/15 Kw Movement X-axis 190 + 69,5 mm Movement Y-axis +55 / -55 mm Movement Z-axis 850 mm Movement W-axis (subspindle to mainspindle) 830 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper VDI 40 Bar feeder Irco-Breuning ILS MUK Spindle motor driven tools 4000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. Nwsdpfx Aasydd H Ie Deb

Condition: used, Year of construction: 2022, This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany 4th – 6th February 2026. For more information go online. Nsdpfjydc Dxjx Aa Dowb

Condition: good (used), Year of construction: 2010, Mazak Integrex 200 - IV, year of manufacture 2010 / overhauled in 2020 for €75,000, Mazak control, turning length 1500 mm, sub-spindle, lower turret with 9 stations, stepless B axis in milling head, 2 x C axis, Y axis, 40-position tool magazine, high-pressure coolant 70 bar, SMW steady rest SR 3.1 clamping range 25 - 165 mm, prepared for probe, measuring probe RMP 60 Q, SMW chuck KNCS NB 260 - 78 with 2 sets of base jaws, machine overhauled by Mazak in 2020 for €75,000, post processor. Nodjyc Uk Ispfx Aa Dowb

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning length: 555 mm, Nakamura-Tome WT-250 Year of manufacture: 2001 Control: Fanuc 18 IT INCLUDED: LOADING SYSTEM (bar feeder for a maximum bar length of 6m) and UNLOADING SYSTEM (for a maximum bar length of 2m) NEW CHIP CONVEYOR (10/2021) LIFTER OVERHAUL (09/2020) Machine Equipment ▪ Bar feeder – max. bar length 6m Max. load length 6200 mm 8 channels with channel diameters Ø 22 mm, Ø 27 mm, Ø 32 mm, Ø 37 mm, Ø 42 mm, Ø 47 mm, Ø 57 mm, Ø 67 mm Includes 8 pusher rods with pusher rod cones Intermediate sizes can also be loaded ▪ Unloading magazine – max. bar length 2m ▪ Coolant tank ▪ Chip conveyor – new as of 10/2021 ▪ Last loader overhaul in 09/2020 – channel replacement, replacement of various bearings, replacement of pusher rods and spindle liner tubes, including maintenance Technical Details Nsdpfx Aeyc Uknoa Dewb ▪ Main spindle power: 18.5 kW / 15 kW ▪ Sub spindle power: 11 kW / 7.5 kW ▪ Main spindle torque: approx. 200 Nm Data sheet: 10-13 kgfm = 100 Nm – 125 Nm ▪ Sub spindle torque: approx. 100 Nm, data sheet: 7.3-10 kgfm = 100 Nm -125 Nm ▪ Spindle speed: 59-4500 rpm ▪ Bar capacity (main spindle): 65 mm ▪ Bar capacity (sub spindle): 51 mm ▪ Axis configuration: X both turrets, Y upper turret only, Z both turrets, C both spindles ▪ Travel X1 / X2: 195 mm Y: ± 41 mm Z: 600 mm ▪ Spindle nose (main spindle): A 2-6 ▪ Spindle nose (sub spindle): A 2-5 ▪ Max. workpiece diameter: 250 mm ▪ Max. turning length: 555 mm ▪ Number of tool stations: upper turret 12, lower turret 12 All stations can be equipped with driven tools ▪ Feed power X1 / X2 and Y: 1 kW ▪ Feed power Z1 / Z2: 2.1 kW ▪ Machine dimensions (LxW): 4.5m x 2.6m ▪ Magazine dimensions (LxW): 7.0m x 1.5m ▪ Unloader dimensions (LxW): 6.0m x 1.5m

Condition: excellent (used), Year of construction: 2006, HYPERTURN 665 MCplus - Y Multi-axis CNC turning center for complete machining of turn-milled components, featuring integrated spindle motors (ISM) on both main and counter spindles, equipped with a thermo-compensation system (liquid-cooled). Drive power: Main spindle: 29 kW Counter spindle: 22 kW Speed range: Main spindle: 0–5000 rpm Nwedoyc Sa Hopfx Aa Dob Counter spindle: 0–7000 rpm Spindle interface (DIN 55026): Main spindle KK6 (max. bar passage 65 mm) Counter spindle KK6 Y-axis: travel range +/- 50 mm The Y-axis is engineered so that resultant cutting forces are distributed over two axes, ensuring exceptional rigidity for all machining operations. Preloaded roller guides in all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D CNC control. Includes: * Hollow clamping cylinder incl. draw tube * Parts ejector and flushing through the counter spindle * 2 x 12-position tool turrets, VDI 30, radial with direction logic for up to 2 x 12 driven tool stations! Swivel speed adjustable via feed switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0–5000 rpm - C-axis for both main and counter spindle - TRANSMIT software for easy C-axis programming * Parts catcher for finished components * Sinumerik 840D * Chip conveyor with programmable discharge height of 1200 mm (type "hinged belt") * Coolant unit integrated into chip conveyor 2 pcs. high-pressure pumps, 14 bar 2 pcs. flushing pumps, 3.7 bar * Control cabinet air conditioning * Electrostatic oil mist separator * Hydraulic unit * Machine lighting * Documentation IMPORTANT: Export/re-export outside the EU is subject to export license requirements. Year of manufacture: 2006 Includes bar feeder High-pressure pump for both tool turrets. Chip flushing for both main and counter spindles. The tool turret for the counter spindle is as new, replaced approx. 2 years ago. Both turrets: 12 x VDI 30 AWZ

Condition: used, Year of construction: 2008, functionality: fully functional, turning diameter: 200 mm, spindle motor power: 11 W, spindle speed (max.): 5,000 rpm, spindle bore: 50 mm, travel distance Z-axis: 450 mm, type of input current: three-phase, chuck outer diameter: 210 mm, bar diameter (max.): 50 mm, We offer this used DMG Gildemeister CTX 310 eco CNC turning and milling center, year 2008. The lathe is in perfect working condition, and various sets of chucks and driven tools are included in the price. Nsdpfx Ajyc Nrgoa Djwb All original paper manuals are available. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning-milling center - TX8 D control - Complete technical data see photos - Year of manufacture 1994 - Hydrobar bar feeder - Various driven tool holders Nodpfxeyc Nnzo Aa Dswb - Tool holders - Three-jaw chuck - Complete documentation Subject to errors and omissions.

Condition: used, Year of construction: 2005, CNC Control: MSX 850 X Axis mm: 260 Z Axis mm: 795 Y Axis mm: +/- 50 Maximum Turning Diameter mm: 366 C-Axis Increment: 0.001° Maximum Turning Length mm: - Cutting Feed Rate mm/min X, Z, Y: - Swing Over Bed mm: Ø Swing Over Cross Slide mm: Ø Bar Capacity mm: Ø 80 (main) / Ø 51 (sub) Rapid Traverse Rate max. m/min X, Z: - Main Spindle 12" Spindle Speed rpm: 4,000 Spindle Power kW: 18.5 Torque Nm: - Spindle Bore mm: - Main Spindle Nose: A2-8 Sub-Spindle 10" Spindle Speed rpm: 6,000 Spindle Power kW: 11 Torque Nm: - Spindle Bore: - Sub-Spindle Nose: A2-5 Turret Positions: 12 Nsdpfoyc Ngqox Aa Dswb Number of Driven Tool Stations: 12 Driven Tool Speed rpm: 6,000 Driven Tool Power kW: 5.5 EQUIPMENT Chip conveyor 3-color status lamp MACHINE DIMENSIONS Length mm: 4,414 Width mm: 2,370 Height mm: 2,115 Weight kg: 6,200