Composite & Tooling Tech GmbH

Condition: good (used), Year of construction: 1999, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, Equipment: documentation/manual, For sale: HERMLE C600V, year 1999. The X and Y axes were renewed in 2022. The spindle bearings were replaced in 2023. The machine was used for manufacturing graphite electrodes. Extraction system is included in the price. An on-site inspection is possible, but the machine is currently not under power. For sale: HERMLE C600V, year 1999. The X and Y axes were renewed in 2022. The spindle bearings were replaced in 2023. The machine was used for manufacturing graphite electrodes. Bf3Uegffaq Extraction system is included in the price. An on-site inspection is possible, but the machine is currently not under power.

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 650 mm, workpiece weight (max.): 7,500 kg, total height: 3,900 mm, total width: 2,950 mm, total length: 3,430 mm, Equipment: documentation/manual, For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered. Dq7Zdb For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered.

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, total height: 2,783 mm, total length: 3,574 mm, total width: 3,143 mm, workpiece height (max.): 590 mm, table width: 875 mm, overall weight: 5,700 kg, table length: 1,110 mm, For sale: Mitsubishi FA30V Advanced with Z600 specification, allowing a cutting height of up to 600 mm. The machine was running flawlessly until the end and is in excellent condition. A viewing at our location is possible; however, the machine is currently not powered. In addition to the 600 mm cutting height, the machine is equipped with a device for large wire spools. For sale: Mitsubishi FA30V Advanced with Z600 specification, allowing a cutting height of up to 600 mm. The machine was running flawlessly until the end and is in excellent condition. A viewing at our location is possible; however, the machine is currently not powered. Dq7W92 In addition to the 600 mm cutting height, the machine is equipped with a device for large wire spools.

Condition: repair required (used), Year of construction: 2006, Functionality: limited functionality, clamping force: 2,200 kN, Equipment: documentation/manual, For sale is an Engel Victory 1350/220 Tech from 2006. The machine is currently in need of repair as the hydraulic pump needs to be replaced. An offer for the repair from the original manufacturer Engel is available, with a cost estimate of approx. 20,000 €. Apart from this defect, the machine is in very good condition and has always been well maintained. Additional information: Dqt7Lj Viewing possible by appointment. The offer for the repair can be viewed on request.

Condition: good (used), Year of construction: 1988, machine/vehicle number: 03105, clearance between the columns: 1,300 mm, table width: 1,200 mm, table length: 1,500 mm, Weight: approx. 16,000 kg, table size: approx. 1500x1200 mm, distance between top plate and bottom plate max is 1550mm, with sliding table and separate control/operating panel Bnaqjzm2V2K

Condition: like new (used), Year of construction: 2009, Functionality: fully functional, Table size 2600*1800mm maximum daylight 2200 mm clamping force 300T F9Pzx3Oi table size 2600*1800mm max day light 2200mm clamping force 300T

Condition: good (used), Year of construction: 2013, operating hours: 24,767 h, Functionality: fully functional, machine/vehicle number: 36000, travel distance X-axis: 2,800 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,100 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, tool mount: 63 mm, table length: 2,800 mm, table width: 2,300 mm, Manufacturer FOOKE Type Endura 705 Linear Year of construction 2013 Control Fidia C40 x-way 2,800 mm Y-path 2,300 mm Z-path 1,100 mm Control Fidia C40 Main Spindle: Speed range - main spindle max. 20,000min / -1 Drive power - main spindle 25kW Tool holder HSK 63 A DIN 69893 Max. Torque 119 Nm Milling Head: Fork milling head with worm gear B-axis: +/- 100° C-axis: 275° work Table: Table surface 2,800 x 2,300 mm Number of T-slots 14 max. table load 5,000kg/m² Fxdsvv2O max. table load 20t Tool changer: Number of tool positions 50pos. Tool holder HSK 63 A DIN 69893 max. tool diameter 70 / (140) mm max. tool length 400mm max. tool weight 6.0kg max. total weight 200.0kg Feed rates: rapid traverse (X/Y/Z) 60m/min max. workpiece Dimensions 2700 x 2200 x 1000mm Total power requirement 130kW Weight of the machine approx. 32.0t Space requirement approx. 8.0 x 6.0 x 5.2 m

Year of construction: 2012, Condition: excellent (used), radio controlled; 2 trolley, Max. Capacity 30t; Span 14.100mm; Trolley 1.600mm; Impeller Diameter 420mm; Trolley Diameter 280mm; Nr. of Wheels 4. including, steel pillar construction, crane runway(blue color metal parts). Uc90N32I

Year of construction: 2007, Condition: excellent (used), ANAYAK HVM 3800 traveling column milling machine with table Year of construction: 2007, very well-kept. B3A0Ruhthq CNC control HEIDENHAIN iTNC 530 Technical data: X axis (lengthways) 3,200 mm Y axis 1500 mm Z axis 1800 mm Table load: 25t Spindle mount ISO 50 DIN 69871 Spindle speeds 4,000 rpm milling head index 2.5 ° B + C axis each Drive power: 30KW, 2-stage gearbox coolant supply

Year of construction: 2022, Condition: new, Pressure: 400 t Bjuzt8Qlum table length: 3000 mm table width: 2000 mm table load max .: 50 t distance between the work tables : min. 400 / max. 2800 mm top tool foldable: 180 degrees Dimensions L x W x H: 7600 × 5670 × 7850 mm Total weight (without operating materials): 85 t Motor power: 44 kW