F. H. P. Drozdex

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,300 h, functionality: fully functional, workpiece weight (max.): 5,000 kg, cutting height (max.): 250 mm, total length: 350 mm, total height: 300 mm, cutting width (max.): 420 mm, total width: 50 mm, control cabinet width: 220 mm, saw blade diameter: 450 mm, rotational speed (min.): 3,000 rpm, overall weight: 5,000 kg, type of input current: three-phase, Weinmann WBZ160 POWERSIX machining/sizing center. Year 2019. Hedpfjzwf Acsx Abtot Approximately 3300 operating hours. Serviced in July 2026 by a HOMAG technician (report available upon request). Very good overall condition. Fully functional. Machine has already been disassembled and is ready for loading (packaging done according to supplier specifications). Transport will require 2 covered semi-trailers (to be arranged and paid for by the buyer).

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1877, cutting height (max.): 300 mm, total length: 18,500 mm, total height: 2,550 mm, cutting width (max.): 450 mm, total width: 2,400 mm, control cabinet width: 400 mm, saw blade diameter: 735 mm, overall weight: 11,000 kg, control cabinet length: 1,600 mm, control cabinet height: 2,400 mm, power: 15 kW (20.39 HP), type of input current: three-phase, Equipment: safety light barrier, Equipment: 01_ Cross-sections 20 x 60 to 300 x 450 mm 02_ Feed conveyor, transverse, 5 strands, 2.2 m 03_ Undercutting miter saw 04_ Universal milling machine ----> Roller cutter ----> Finger cutter 05_ Combination support for vertically operating tools ----> 1x Drilling machine ----> 1x Finger milling machine 06_ Combination support for horizontally operating tools ----> 2x Drilling machine ----> 1x Grooving machine 07_ Beam turning station, fully automatic Machine installation: 08_ Substrate, foundation: ----> The floor slab must have a thickness of at least 10 cm (with corresponding good reinforcement) This should be level and suitable for anchoring. 09_ Power requirements, type, quality, quantity: 09.1_ Electrical: ----> Voltage: 400/230V, 3/N/PE ----> Fuse rating: 3 x 63A ----> Frequency: 50 Hz ----> Peak demand: 15 kW The mains voltage must be constant and uninterrupted within the specified tolerance range! 09.2_ Compressed air: ----> Flow rate: V < 600 l/min ----> Pressure: Operating pressure p = 8.5 bar; Maximum permissible pressure p = 10 bar Important: Hsdpfx Abszv Tt Hjtet The control system was converted by Hundegger from MIPPS to CAN control in the fall of 2020!!

Condition: excellent (used), functionality: fully functional, Hundegger planing machine, 400x300mm, with beveling function including automatic infeed system with cross conveyor - automatic unloader with lateral ejector Availability: immediate Hsdozvy Taepfx Abtot Machine is connected and ready for demonstration.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, KRÜSI chalet building machine / log house production line type CM 40 Year of construction 2002 Krüsi CM40, consisting of the following components: Circular saw ( cross-cut saw ) Horizontal and vertical log house router Groove milling machine (horizontal) boring mill Infeed table 6m Outfeed table 6 m KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE-marked Ie Dkovfv Tfjk Ddfetk Condition: good, technically checked and cleaned / ready for use Functional principle Processing of wood for chalet construction / log house construction The beams can be processed in a single operation - Cutting to length - Horizontal and vertical milling of necks / grooves in one clamping operation - Drilling - Milling the face grooves Workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for maximum machining accuracy. Slide guidance with dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for use, with contactor control, Hedpfxezvrf Ij Abtet motors protected by thermal relay. Electrical equipment for voltage 380 V, 50 Hz, with protective covers, Central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed, electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely variable. Fully wired and installed, including air maintenance unit. Patches with a thickness of more than 14 cm must be processed in two tensions. Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analog dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide-tipped with cutting depth limiter (synchronous operation) Adjustable riving knife Motor speed min. 1 / 2900 Power kW 2.2 2nd CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal trimming unit Milling cutter Ø 180mm Milling cutter width max.130mm From cutter width 60 mm only use aluminum alloy cutters with reversible cutting edges 2 hydropneumatic feed motors kW 2.2 each Hydropneumatic feed Rapid traverse and work feed infinitely adjustable 3rd drilling unit: Manual feed Spindle adjustment with analog dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1.8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Cutter Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3.0 2 V-belts SPZ 9.5x1000 La Pneumatic Operating pressure on site min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: good (used), Year of construction: 1992, functionality: limited functionality, machine/vehicle number: 1200, Hundegger P10 – Year of manufacture 1992 – partially modernized control system – good mechanical condition For sale: well-maintained Hundegger P10 cutting machine, year of manufacture 1992, with extensive equipment. Mechanical components in good condition, control system modernized (data import via USB drive, DOS conversion). 3 measuring scales are missing – the price reflects this. The machine is currently still in operation and can be tested on-site. Technical equipment: Hjdezu Anwopfx Abtjt Swivel saw, notching milling cutter, rafter nail drilling unit, edge bender, blade milling cutter, horizontal and vertical drill Three-sided cutter, vertical milling cutter, finger cutter, panel cutter, ejector and transverse conveyor For an additional charge, the machine can be delivered throughout Europe – Delivery does not include unloading or assembly. Currently, the cutting system is being dismantled for transport and temporarily stored. A demonstration in operation is no longer possible. However, a video in processing mode can be provided for a better assessment.

Condition: used, Year of construction: 2006, Timber processing machine Manufacturer: Hundegger Type: K2-4-450 Year of manufacture: 2006 Technical data - Maximum timber length for feeding: 13 m - Maximum timber length for stacking: 12 m - Color: RAL 5012 blue - Infeed cross conveyor, 5 strands, horizontal, 2.2 m with flat belt chain - Infeed strand with shaft extension - Extension support with infeed device - Undercarriage swivel miter saw - Universal milling machine, 4-axis, UF4 - Roller cutter - Finger cutter - Dovetail cutter - Combination support for vertically operating tools - Drilling unit, 2.2 kW - Drilling unit, 3.0 kW, reinforced - Combination support for horizontally operating tools Hjdpfx Abszuzaretot - Drilling unit, 2.2 kW - Slotting unit - Marking unit - Stacking table, 6-arm - Fully automatic beam turning station, pneumatic - Refined timber support surfaces - Label printer Note: The technical data and descriptions are a verbatim transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 1987, functionality: fully functional, For sale: well-maintained REX ZA-800/S cutting machine, manufactured in 1987. Hjdpfxozux Hco Abtet The machine is fully functional and currently still in operation. It is in good condition and available immediately upon agreement.

Condition: good (used), Dry sorting line with 22 pockets. Hsdpszuk T Ujfx Abtst

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1711, This industrial multi-blade band sawmill line (multi-head band resaw) is designed for high-volume log and timber resawing. Constructed on a robust steel frame, the machine features a highly efficient 8-head configuration, where each individual cutting unit is powered by its own dedicated electric motor for maximum performance. The machine is equipped with 15 kW motors and operates with standard 38 mm x 5025 mm saw blades. A key technical advantage of this line is its versatility: every other saw head can be tilted up to 30 degrees. This specific function allows the machine to cut diagonal FE (featheredge / weatherboard) boards up to 175 mm in width. Hsdezudynepfx Abtjt Material feeding is handled by a heavy-duty steel chain conveyor system that ensures stable and precise timber positioning throughout the cutting process. Manufactured in Latvia, the machine is completely ready for continuous professional sawmill operation. It is still connected and can be started.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, warranty duration: 12 months, total length: 7,500 mm, total height: 700 mm, total width: 3,600 mm, BOOSTON ER-02/750 – STATIONARY ASSEMBLY TABLE, 7.5 m, FOR PREFABRICATION OF HOUSES BOOSTON MACHINERY is a manufacturer of machines and equipment for prefabricated house plants. We produce stationary assembly tables, rotary tables, butterfly tables, and complete production lines for the prefabrication of timber structures. ## TECHNICAL SPECIFICATIONS ➡️ Working length of the table: 7500 mm Other available lengths: 3.0 m / 4.5 m / 6.0 m / 7.5 m / 9.0 m / 10.5 m / 12.0 m / 13.5 m / 15.0 m ➡️ Working height of the table: 700 mm (adjustment ±50 mm) ➡️ Working width of the table: 3600 mm – other widths can be manufactured ➡️ Height range of the prefabricated wall using the SD-01 clamping cylinder: 600–3400 mm ➡️ Vertical locking pins: 0–240 mm, diameter 35 mm (adjustable) ➡️ Horizontal transport of finished elements – optional: set of pneumatically lifted rollers – 2 rows of rollers at the edges of the table ➡️ Table type: stationary table ➡️ Pneumatic supply: 8 BAR – for the ER-02R version equipped with rollers for horizontal transport ➡️ Maximum permissible load: 100 kg/m² of finished prefabricated element, with a maximum element height of 3000 mm ## ADDITIONAL OPTIONS 1. SD-01 clamping cylinders 2. Set of pneumatically lifted rollers from the table surface – 2 rows of rollers BOOSTON ER-02 The ER-02 stationary assembly table is a versatile workstation designed for the prefabrication of walls and other elements in timber frame construction. Hsdpsztpwpsfx Abtjt The modular design of the work platform allows for expansion of the workstation and connection to other BOOSTON assembly and rotary tables, creating a complete production line. The ER-02 table is available in lengths from 3 to 15 meters. The standard work area, along with the support, enables the prefabrication of elements up to 3400 mm in height using the SD-01 clamping cylinders. We manufacture our machines in Poland. Manufacturer: BOOSTON MACHINERY

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 12593, Equipment: safety light barrier, Manufacturer: Hundegger Model: K2i-5-625 Year of Manufacture: 2015 Equipment: K2i-5-625, frame length 15.40 m Color: RAL 5012 blue Input timber length: 13 m Output timber length: 10.3 m Infeed cross conveyor and feed cross conveyor Undertable swivel miter saw, 11 kW Universal milling machine UF5 Roller cutter Finger cutter Dovetail cutter Combination support for vertically operating tools Drilling unit, 3 kW Drilling unit, 2.2 kW Combination support for horizontally operating tools Slotting machine, 7.5 kW Drilling unit, 3 kW Drilling unit, 2.2 kW Longitudinal and transverse groove milling machine Turret milling head - vertical Inkjet printer, rear Marking device, rear Rough timber holder in front of the miter saw UPS (Uninterruptible Power Supply) Beam turning station, hydraulic Refined machine surface Chrome-plated saw table Discharge table and planer not included. Hjdpfjzrkw Iex Abtet Available from: 01/2027 Location: 85625 Glonn Price: €250,000 (negotiable)

Condition: used, Year of construction: 2002, functionality: fully functional, We are offering this operational Hundegger K2-5 62.5 mm cutting machine, manufactured in 2002, for sale. The machine was reassembled at the new location by Hundegger in 2021. The safety features have been updated to the latest standards (€17,000) and the machine has been serviced. From 2021 to early 2022, the machine was completely rebuilt by Hundegger and approved for operation. The company declared insolvency in 2025 and the property was sold. Consequently, the K2, including the HEA 200 support beam and chip extraction system (pusher system), was completely dismantled in operational condition and removed from the site by Hundegger. Invoices for the K2 (2002), safety features, saw blade, milling heads, support blocks (2025), etc., can be provided upon request. Hsdpozrazcsfx Abtjt The K2 was fully functional, preserved, and dismantled at the Hundegger site and is now in storage. Transport requires 2 semi-trailer trucks, approximately 28.5 tons. Loading can be arranged for approximately €4,000. Manufacturer: Hundegger Model: K2-5 625 Year of Manufacture: 2002 Condition: Operational Category ID: 156 Type ID: 2209 Machine Type: Cutting Machine - Undercarriage pivoting miter saw - Universal milling unit, 5-axis (UF5) - Roller cutter - Finger cutter - Dovetail cutter - Combination support for vertically operating tools - 1x Vertical finger milling machine, 5.5 kW - 2x Drilling unit, 2.2 kW Drilling unit, swiveling 30° (3.0 kW) - drilling direction horizontal - Combination support for horizontally operating tools - 1x Drilling unit, 2.2 kW - drilling direction horizontal - 1x Drilling unit, swiveling 30° (3.0 kW) - 1x Grooving unit, 7.5 kW Space available for an additional main unit. Control system: KI 2 – KI 3 Additionally, a cabinet with consumables such as lubricants, grease, and rollers is included. A new roller cutter, dovetail cutter, grooving chain, and replacement cutting inserts for the tools are available, as documented by an invoice for €3,800. All necessary documentation from Hundegger for the installation and operation of the machine is available.

Condition: ready for operation (used), Year of construction: 2000, A fully automatic 4-axis Hundegger joinery machine is available. Material: structural timber, standard material: softwood, min. timber cross section X/Y: 20mm/50mm, max. timber cross section X/Y: 300mm/560mm, min. timber length in automatic operation: 300mm, max. feed rate: 25m/min, max. hydraulic pressure: 100bar. Saw blade diameter: 735mm, kerf: 6mm, saw blade thickness: 4.4mm, bore: 30mm. Cylindrical cutter diameter: 350mm, cylindrical cutter width: 120mm, cylindrical cutter inner diameter: 55mm. Machine dimensions X/Y/Z: approx. 12000mm/2400mm/2550mm, weight: approx. 13t, control system: Siemens Pentium 400 with Hundegger EKP. Documentation available. An on-site inspection is possible. Hsdpfx Abszpyxcotjt

Condition: like new (used), Year of construction: 2025, operating hours: 25 h, functionality: fully functional, machine/vehicle number: 241115, feed length X-axis: 40,000 mm, warranty duration: 6 months, total length: 10,000 mm, total height: 3,350 mm, type of input current: three-phase, Equipment: CE marking, Semi-automatic tilting table for wall panel assembly, timber frame construction, maximum size 4000x10000mm - Working height 700mm Hjdpsznvx Njfx Abtet - 3 positions: 0° - 80° - 92° - Adjustable travel up to 40 meters - 2 remote controls - Ground rails and guides - 4 drive wheels - LENZE motor - LENZE control unit - Hydraulic unit and control cabinet integrated - Cable reel - Human-Machine Interface - Manufacturer's warranty: 6 months - Installation and commissioning available

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: P260713253, 𝘼𝙪𝙩𝙤𝙢𝙖𝙩𝙞𝙘 𝘿𝙤𝙪𝙗𝙡𝙚-𝙀𝙣𝙙 𝙋𝙧𝙤𝙛𝙞𝙡𝙞𝙣𝙜 𝙇𝙞𝙣𝙚 𝙛𝙤𝙧 𝙋𝙖𝙧𝙦𝙪𝙚𝙩 𝙁𝙡𝙤𝙤𝙧𝙞𝙣𝙜 1. 𝗚𝗲𝗻𝗲𝗿𝗮𝗹 𝗜𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 • HOMAG OPTIMAT FRP225/7/10PL/L – Longitudinal Profiling Machine • HOMAG OPTIMAT FRP226/5/5PL/Q – Cross Profiling Machine Automatic, high-speed double-end profiling line designed for the production of solid wood, engineered wood, and laminate flooring. The line performs precision machining on all four edges, including tongue-and-groove and click-locking profiles. Hsdpfx Aszmrw Sjbtet 2. 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀 𝗣𝗿𝗼𝗰𝗲𝘀𝘀𝗲𝗱 • Solid hardwood flooring • Engineered wood flooring • Laminate flooring • Multi-layer parquet • Decorative flooring panels 3. 𝗠𝗮𝗶𝗻 𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻 Parameter Specification Machine Type Double-End Tenoner / Profiling Line Longitudinal Machine HOMAG FRP225 Cross Machine HOMAG FRP226 Maximum Feed Speed Up to 80 m/min Working Principle Continuous automatic feed Number of Working Units 7 (FRP225) + 5 (FRP226) Total Working Units 12 Production Mode Continuous 4. 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗖𝗮𝗽𝗮𝗰𝗶𝘁𝘆 Parameter Typical Range Thickness 5–25 mm Width Customer-specific configuration Length Customer-specific configuration 5. 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗢𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻𝘀 The line is capable of performing: • Longitudinal profiling • Cross-end profiling • Tongue machining • Groove machining • Click profile machining (depending on tooling) • Micro-bevel production • Relief grooves • Edge trimming • Sizing and calibration • Four-side profiling 6. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝗳𝗶𝗴𝘂𝗿𝗮𝘁𝗶𝗼𝗻 HOMAG FRP225 Function • Longitudinal edge profiling Configuration • Six machining units • High-frequency spindle motors • Precision side guides • Automatic pressure system • Heavy-duty chain conveyor HOMAG FRP226 Function • Cross-end profiling Configuration • Four machining units • Automatic synchronization with FRP225 • Precision positioning system • High-speed transfer conveyor 7. 𝗗𝗿𝗶𝘃𝗲 𝗦𝘆𝘀𝘁𝗲𝗺 • High-frequency spindle motors • Variable-speed feed drive • Precision chain transport system • Pneumatic pressure rollers • Servo-controlled positioning (depending on machine version) 8. 𝗧𝗼𝗼𝗹𝗶𝗻𝗴 • Leitz • Leuco • Kanefusa • AKE • Tigra Typical tooling: • Profile cutters • Grooving cutters • Chamfer cutters • Relief cutters • Diamond tooling (PCD) 9. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 • Siemens PLC control system • Frequency-controlled spindle drives • Digital machine diagnostics • Electronic feed speed adjustment 10. 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 Parameter Typical Value Feed Speed Up to 80 m/min Production Capacity Approximately 1,500–4,000 m² per shift* 11. 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗟𝗶𝗻𝗲 𝗟𝗮𝘆𝗼𝘂𝘁 1. Automatic infeed system 2. HOMAG FRP225 longitudinal profiler 3. Automatic transfer section 4. HOMAG FRP226 cross profiler 5. Inspection station 6. Automatic stacker 12. 𝗠𝗮𝗶𝗻 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 • High dimensional accuracy • Excellent profile repeatability • High production speed • Fast tooling changeover • Continuous automatic operation • Suitable for traditional tongue-and-groove and modern click systems • Reliable industrial design for high-volume production 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 • Solid parquet flooring • Engineered flooring • Laminate flooring • Luxury wood flooring • High-precision click flooring systems

Condition: used, Long table 5.5 kW motor Hsdpfx Abjzhgzhjtjt Trainer 3 rollers 380V

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting width (max.): 450 mm, working length: 16,000 mm, working width: 450 mm, Equipment: safety light barrier, A well-maintained Hundegger K2 cutting machine with a planer is offered for sale. The machine is fully functional and has been serviced several times a year by Hundegger. The machine is still in operation until the beginning of November and can then be dismantled by the buyer. =Equipment: = Machine type K2-5-450 - Wood length, feed and discharge max. 16m - Color RAL 5012 blue - Feed cross conveyor, 6 strands, horizontal, 2.2 m with flat belt chains - Extendable wood discharge - Undercarriage swivel miter saw - Universal milling cutter, 5-axis UFS (roller cutter, finger cutter, dovetail cutter) - Combination support for vertically operating tools (finger cutter, drilling unit 2.2kW) - Combination support for horizontally operating tools (drilling unit 2.2kW, drilling unit 2.2kW) - Marking device at the front - Discharge table, 6-arm - Beam turning station, hydraulic - Enhanced wood support surfaces (the vulnerable plastic coating has been replaced with maintenance-free stainless steel, chrome-plated tables, stainless steel rollers) - Extension roller conveyor, 10m with feed roller - Transfer cross conveyor, 7 strands, 3.5m with flat belt chain - Connection to planer HMD = Planer HMD - Fully automatic 4-sided planing and chamfering - Planer motors 7kW - Automatic thickness planer adjustment - Direct planer control - Planer machine directly integrated after the cutting machine = Other - Inspection possible by appointment. - If the machine is being dismantled, it can of course also be inspected in the operating environment. Hsdpfjzb I Iwjx Abtst - A new K2 with a planer and comparable equipment costs approximately 800,000 euros. - New spare parts in stock can be included at a favorable price. - The machine runs perfectly, however, no guarantee or liability is assumed for future damages. - Ideal machine for medium to large carpentry or sawmill operations. = Contact - Friedrich Hirsch GmbH - Schwaig 2, 3351 Weistrach, Lower Austria - Managing Director and Owner: Friedrich Hirsch - If you have any questions, please call us from Monday to Friday from 7:00 a.m. to 12:00 p.m. and from 1:00 p.m. to 5:00 p.m. or send an email at any time. - Unfortunately, I cannot provide a mobile phone number, as the advertisement would otherwise be blocked.

Condition: new, Year of construction: 2024, sorting line trimmer Hodpfx Abszbxxystet

Condition: used, Year of construction: 2000, machine/vehicle number: 11197, Hundegger K2-450 Cutting Machine – Year of Manufacture 2000 For sale is a used Hundegger K2-450 cutting machine, manufactured in 2000, from an ongoing operation. The machine was used for processing wooden components in timber frame and timber house construction and is currently located at Norges Hus Nova OÜ in Perila, Estonia. The machine can be inspected in operation by appointment. Hsdpfx Abjzbnkfotst Technical Data: Manufacturer: Hundegger Model: K2-450 Year of Manufacture: 2000 Machine No.: 11197 Condition: Used Location: Kuivati tee 10, Perila, Harju County, Estonia Equipment / Notes: Complete infeed and outfeed system available Machine used in a production environment until recently Sale due to modernization or restructuring of production Dismantling and loading upon agreement On-site inspection is highly recommended The machine is ideal for carpentry workshops, timber construction companies, and businesses in the cutting field that are looking for a proven and robust Hundegger machine. We are available to provide further information, technical details, additional images, or to arrange an inspection appointment.

Condition: used, functionality: fully functional, The WMS120 multi-function portal is a CNC machine for the automated processing of wooden elements (walls, roofs, and ceilings). Machine length (X-axis): approx. 3,000 mm Machine width (Y-axis): approx. 6,200 mm Machine height (Z-axis): approx. 3,000 mm Processable element width: approx. 3,400 mm Tool set for the WMS tool changer, consisting of: - 1x universal roughing cutter - 1x sawing unit - Marking unit with ballpoint pen technology Clamping and assembly units 2+2 clamping devices, Haubold - 2024 new PC with Windows 10 Hsdeza D Tajpfx Abtet

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale: Hundegger SC 480 Speed-Cut – Year 2023 We are selling our fully automatic cutting system, the Hundegger SC 480 Speed-Cut, from 2023. Machine equipment (excerpt): - SC 480 Fully automatic cutting system, base machine with 5-axis sawing unit – mirrored version - Hundegger production software CAMBIUM - Line laser for component referencing - Infeed and outfeed cross conveyor 10.1 m, 7 strands (for timber lengths up to 13 m) - Hydraulic lifting table for timber length 13 m (6 t) - Vertical finger milling cutter 6.5 kW and 10 kW HSK spindle - 4-axis revolver milling cutter 7.5 kW universal unit - Drilling unit 3.0 kW hydropneumatic - Grooving unit - Inkjet labeling system (max. 101.6 mm) Hsdpfx Absza Dzdstst - Label printer system on the component discharge area - Discharge table, pneumatic, for timber lengths up to 13 m - Central lubrication system - Various other options and units General: Year of manufacture: 2023 Operating hours: low (machine from ongoing operation) Regularly maintained by Hundegger Condition: very good Contact: Philipp Schöb, Schöb AG, Haagerstrasse 80, 9473 Gams

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 2024-A00280, feed length X-axis: 10,000 mm, feed length Y-axis: 4,000 mm, feed length Z-axis: 100 mm, warranty duration: 12 months, total length: 11,000 mm, total height: 2,000 mm, total width: 4,500 mm, overall weight: 2,500 kg, type of input current: three-phase, Equipment: CE marking, Semi-automatic framing machine for timber frame walls, max. 4000x10000mm - Max. stud height: 220mm - 3 nailing positions along the height - 2 BEA nail guns, strip-fed nails - Wall length production: 1000mm to 10000mm Hodpfxozap I Ae Abtst - Wall width production: 600mm to 4000mm - Wall height production: 120mm to 220mm - 2 independent nailing stations (no beams) - HIWIN rail and guide system - LENZE motor - LENZE PLC - Human-Machine Interface (HMI) - Control panel - Manufacturer's warranty: 12 months - Installation and commissioning possible

Condition: good (used), Year of construction: 2001, functionality: fully functional, double-head cutter with pre-scoring, chipping, 4 milling cutters, and edge finishing belt for both the right and left sides. Hedpjy U Inxofx Abtjt Maximum working width: 2500 mm.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Short-term availability – THE OPPORTUNITY! We are offering our well-maintained and fully operational chalet machine from the renowned Swiss manufacturer KRÜSI for sale. As we are switching to another model, you now have the chance to acquire this flawless machine. It is still in use, so functional testing and trial runs are welcome at any time. Dismantling and collection by buyer Assembly in consultation with Krüsi recommended Machine year: 2018, in operation since 2019 Total length with tables approx. 35.5 m Available from 08/2026 Machine details: - 4 milling units, each 4 kW, spindle drive via toothed belt - Maximum working range: 250 mm construction height and 245 mm wall thickness - 6 frequency converters for soft start and motor braking - Automatic work cycle and pneumatic workpiece clamping - Siko position indicators on adjustment spindles for horizontal operation - Pneumatic under-table crosscut saw, left, 5.5 kW with frequency converter - Hand-operated drilling unit 1.8 kW, mounted on the right column - Hydropneumatic feed for drilling unit - Additional pneumatic vertical clamping cylinder with bracket - Additional pneumatic horizontal clamping cylinder with bracket - Auxiliary table for milling unit with additional vertical clamping cylinder - Stop rail 0.5 m, mounted at the front left of the machine frame - Stop rail 0.5 m, mounted at the front right of the machine frame - Auxiliary table for short workpieces - Steel chip funnel for pit extraction - Dovetail and end-groove milling machine (with pneumatic rotary axis) Hedpfx Aoy Ri Huebtot Milling and drilling tools: For horizontal milling units: - WPL rabbet cutter Ø 180 mm, adjustable range 61-240 mm x 40 mm, Z=2 For vertical milling units: - WPL rabbet cutter Ø 230 mm, adjustable range 61-240 mm x 40 mm, Z=2 - WPL rabbet cutter Ø 270 mm, adjustable range 61-240 mm x 40 mm, Z=2 For drilling unit: - Drill Ø 20 mm, with long centering tip - Drill Ø 30 mm, with long centering tip For 90° swiveling dovetail and end-groove milling machine: - WS rabbet cutter Ø 230 mm, bottom Ø 40 mm, width 40 mm - WS dovetail cutter 20°, 92 x 36.5 x IG M 24 left, Z3, V3, F3 with chip-breaker grooves, MK 863-1 - WS dovetail cutter 20°, 92 x 36.5 x Ø 30 mm, Z3, V3, F3 with chip-breaker grooves, MK 863-2 - Clamping wrench for above dovetail cutters Accessories: Horizontal above: - WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm - Center part alu Ø 270 mm, width 30 mm, bore Ø 40, Z2 - Center part alu Ø 270 mm, width 50 mm, bore Ø 40, Z2 Horizontal below: - WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3 - Center part alu Ø 180 mm, width 40 mm, bore Ø 40, Z2 Vertical front: - WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm - Center part alu Ø 270 mm, width 40 mm, bore Ø 40, Z2 Vertical rear: - WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3 - Center part alu Ø 180 mm, width 30 mm, bore Ø 40, Z2 - Safety guard for horizontal above with holder (for cutter Ø 270 mm) - Safety guard for vertical rear with holder (for cutter Ø 180 mm)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 9076, cutting height (max.): 160 mm, cutting width (max.): 450 mm, power: 15 kW (20.39 HP), TECHNICAL DETAILS Max. cutting width: 450 mm Max. cutting height: 160 mm Infeed table length: 8,200 mm Outfeed table length: 8,900 mm Max. infeed length: 8,000 mm MACHINE DETAILS Main motor power: 15 kW Power: 15.0 kW Control: Windows 10 Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 23,000 x 5,200 x 2,700 mm Weight: 8,000 kg EQUIPMENT Safety light curtain Safety fence Waste conveyor belt Label printer Marking pen Hedpfx Ajy Nx Eqobtjt